Traxxas LP TRX1018 Traxxas Link wireless module User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	2975361
Application ID	NoKB17dp0hElm5wmhegN3w==
Document Description	Users Manual-2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	234.87kB (2935876 bits)
Date Submitted	2016-04-29 00:00:00
Date Available	2016-04-29 00:00:00
Creation Date	2016-04-15 16:11:47
Producing Software	iText 2.1.7 by 1T3XT
Document Lastmod	2016-04-15 16:11:47
Document Title	Users Manual-2
Document Creator	pdfsam-console (Ver. 2.4.1e)

CAPTURING VIDEO
Film Mode
The transmitter will always power up in Film Mode. Film Mode is the
easiest to fly (see “Controlling Āton” on page 7 for flight control instructions).
Install the included landing gear and fixed camera mount to the Āton;
then, use your GoPro® or other action camera and accessories (not
included)* to capture aerial video.
IMPORTANT: Consult local laws and ordinances before installing and
operating any type of photograph-capable or video recording device on
this model.
WARNING: To prevent radio interference and loss of control, always
disable Wi-Fi on your GoPro® or other action camera (if so equipped)
BEFORE flying the Āton.
WARNING: Some GoPro® cameras, specifically the Hero 3 and Hero
4 series with LCD screen, are known to produce radio frequency
emissions that could interfere with Aton’s ability to acquire GPS
satellite communications. The Āton is equipped with shielding to help
protect it from these radio frequency emissions. Use caution with
these cameras and test in a safe area to be sure Āton is acquiring GPS
satellites and setting a Return to Home location when these cameras
are attached, powered on, and recording video. DO NOT operate Āton
with these cameras if you are not connected to GPS (four green LEDs on
the Status Bar).
2. CAMERA BRACKET INSTALLATION
Attach the fixed camera mount to the front landing gear by aligning the
tabs. Slide the mount toward the rear of the helicopter until the tabs
snap into place.
Tabs
Bottom View
of Camera Bracket
Tabs
1. LANDING GEAR INSTALLATION
Use the included 2.6x8mm screws to mount the front and rear landing gear
to the helicopter.
FINAL ASSEMBLY
GoPro® Camera and
accessories not included
10 • TRAXXAS

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Modify Date                     : 2016:04:15 16:11:47+08:00
Creator                         : pdfsam-console (Ver. 2.4.1e)
Create Date                     : 2016:04:15 16:11:47+08:00
Producer                        : iText 2.1.7 by 1T3XT
Page Count                      : 1

EXIF Metadata provided by EXIF.tools