Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3964874 |
| Application ID | 5dgMnmA1uoOCIW3gKbLEIw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 52.27kB (653389 bits) |
| Date Submitted | 2018-08-15 00:00:00 |
| Date Available | 2018-08-15 00:00:00 |
| Creation Date | 2018-08-10 17:52:37 |
| Producing Software | Acrobat Distiller 10.1.16 (Windows) |
| Document Lastmod | 2018-08-10 17:52:37 |
| Document Title | Microsoft Word - TriMark to FCC; general instructions_08102018.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Lai |
TriMark Corporation Generation 3 EAsk System FCC general information doc Contents 36163‐02 ....................................................................................................................................................... 1 General Specifications............................................................................................................................... 1 FOB FCC version ........................................................................................................................................ 1 Wiring Diagram ......................................................................................................................................... 1 Block Diagram ........................................................................................................................................... 1 36160 IO Module .......................................................................................................................................... 2 Pin Layout.................................................................................................................................................. 2 General Specifications............................................................................................................................... 2 IO Module FCC version.............................................................................................................................. 3 Wiring diagram.......................................................................................................................................... 3 Model No. : 38848‐01 , 38846‐01 , 38846‐02 , 38846‐03 , 38846‐04 38847‐01 , 38847‐02 , 38847‐03 , 38847‐04 , 36160‐01 36163‐02 General Specifications All button presses Create a 433MHz broadcast There is a Passive 3D 125 KHz receiver Power Current (quiescent) Active (rms) 3V battery 15‐30uA 18mA FOB FCC version FCC version will go into transmit mode when button 2 or 4 is pressed, and will exit transmit mode on another press. This is to conserve battery. Wiring Diagram Insert the DL2032 battery into the holder of the PCB Block Diagram 36160 IO Module Pin Layout General Specifications All actives are presently set to 12V Input Activated Reaction from Hardware Tests PROG_IN_1 PROG_OUT_1 activates while PROG_IN_1 is active. PROG_IN_2 PROG_OUT_2 activates while PROG_IN_2 is active. PROG_IN_3 PROG_OUT_3 activates while PROG_IN_3 is active. PROG_IN_4 PROG_OUT_4 activates while PROG_IN_4 is active. Fob Button 1 PROG_OUT_1 activates while fob button 1 is pressed. Fob Button 2 PROG_OUT_2 activates while fob button 2 is pressed. Fob Button 3 PROG_OUT_3 activates while fob button 3 is pressed. Fob Button 4 PROG_OUT_4 activates while fob button 4 is pressed. Door Handle Touch RELAY_20A_2 activates for 500 msec when the LF module senses a handle touch. Power Supply 6.5V to 16V Nominal 12V Quiescent Current (no load) 311uA Nominal (load) 2.5mA On Board relays (active) 30A Normal (Actuator) 5A All ANT125 are bi‐directional. They can be plugged in either way IO Module FCC version LF will constantly generate a 125 KHz wave on channel 1 as long as it is plugged in. Do not leave on more than 4 hours at a time. Channels 2 and 3 use the same circuit, but will not be on. Wiring diagram This device complies with Industry Canada licence-exempt RSS-210 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le manuel d'utilisation des appareils radio exempts de licence doit contenir l'énoncé qui suit, ou l'équivalent, à un endroit bien en vue et/ou sur les appareils : Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example ‐ use only shielded interface cables when connecting to computer or peripheral devices).
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Lai Create Date : 2018:08:10 17:52:37+08:00 Modify Date : 2018:08:10 17:52:37+08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - TriMark to FCC; general instructions_08102018.doc Creator : Lai Producer : Acrobat Distiller 10.1.16 (Windows) Document ID : uuid:cb7e7bbb-62f6-4e11-a923-9550028cb96b Instance ID : uuid:14e6b080-6a28-445f-ad4f-e141ab326196 Page Count : 5EXIF Metadata provided by EXIF.tools