Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3690633 |
| Application ID | Jk0p/+5HL7DZx2o1FJiVVA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 32.37kB (404625 bits) |
| Date Submitted | 2017-12-22 00:00:00 |
| Date Available | 2017-12-22 00:00:00 |
| Creation Date | 2017-12-07 12:42:29 |
| Producing Software | Acrobat Distiller 10.1.16 (Windows) |
| Document Lastmod | 2017-12-22 11:48:41 |
| Document Title | Microsoft Word - TriMark to FCC; general instructions 160140 rev6.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Lai |
TriMark Corporation Generation 3 EAsk System FCC general information doc Contents 37843‐ IO Module ......................................................................................................................................... 2 Pin Layout.................................................................................................................................................. 2 J11 – Baseboard 12-pin......................................................................................................................... 2 J13 – Baseboard 14-pin ........................................................................................................................ 2 J1 – Programmable Inputs & Relay Outputs Group 1 ...................................................................... 2 J2 – Key Switch & Relay Outputs Group 2 ........................................................................................ 3 J3 – External Relay Drivers ................................................................................................................. 3 J4 – Relay Outputs Group 3 ................................................................................................................ 4 J5 – Relay Outputs 4 ............................................................................................................................ 4 J14 - JTAG Connector .......................................................................................................................... 4 General Specifications............................................................................................................................... 4 IO Module FCC version.............................................................................................................................. 6 Wiring diagram.......................................................................................................................................... 7 FCC rule and regulation............................................................................................................................. 8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Le manuel d'utilisation des appareils radio exempts de licence doit contenir l'énoncé qui suit, ou l'équivalent, à un endroit bien en vue et/ou sur les appareils : Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. 37843‐ IO Module Pin Layout J11 – Baseboard 12-pin Error! Objects cannot be created from editing field codes. Pin Signal Name J11.1 J11.2 J11.3 J11.4 J11.5 J11.6 J11.7 J11.8 J11.9 J11.10 J11.11 J11.12 VIN PROG_IN_3 PROG_OUT_2 PROG_OUT_1 PROG_IN_1 LF_ANT125_OUT_1 RELAY_20A_1 RELAY_20A_2 CANL CANH GND LF_ANT125_IN_1 Input/ Output Input Input (+) Output Output Input (+) Output Output Output In/Out In/Out Input J13 – Baseboard 14-pin Error! Objects cannot be created from editing field codes. Pin Signal Name J13.1 J13.2 J13.3 J13.4 J13.5 J13.6 J13.7 J13.8 J13.9 J13.10 J13.11 J13.12 J13.13 J13.14 PROG_OUT_4 PROG_IN_2 PROG_OUT_3 LF_ANT125_OUT_3 LF_ANT125_OUT_2 12V_REG PROG_IN_4 GND LF_ANT125_IN_3 LF_ANT125_IN_2 GND HF_433MHZ_ANT Input/ Output Output Input (+) Output Output Output Output Input (+) Input Input Input J1 – Programmable Inputs & Relay Outputs Group 1 Error! Objects cannot be created from editing field codes. Pin Signal Name J1.1 PROG_IN_101 Input/ Output Input (-) J1.2 J1.3 J1.4 & 16 J1.5 & 17 J1.6 & 18 J1.7 & 19 J1.8 J1.9 J1.10 J1.11 J1.12 J1.13 J1.14 J1.15 J1.20 J1.21 J1.22 J1.23 J1.24 PROG_IN_102 PROG_IN_103 GND RELAY_30A_109 RELAY_30A_110 VIN RELAY_20A_111 PROG_IN_104 PROG_IN_105 PROG_IN_106 PROG_IN_107 PROG_IN_108 Input (-) Input (-) Output Output Input Output Input (-) Input (-) Input (-) Input (-) Input (-) RELAY_20A_114 Output PROG_IN_109 RELAY_20A_113 Input (-) Output J2 – Key Switch & Relay Outputs Group 2 Error! Objects cannot be created from editing field codes. Pin Signal Name J2.1 J2.2 J2.3 J2.4 VIN J2.5 J2.6 J2.7 J2.8 J2.9 J2.10 KEY_SWITCH_1 / P_BRAKE_SWITCH GND KEY_SWITCH_ COM KEY_SWITCH_2 / LOCK_SWITCH Input/ Output Input Input Input GND J3 – External Relay Drivers Error! Objects cannot be created from editing field codes. Pin Signal Name J3.1 J3.2 J3.3 J3.4 J3.5 J3.6 J3.7 J3.8 12V_REG PROG_OUT_101 PROG_OUT_102 Input/ Output Output Output Output PROG_OUT_105 PROG_OUT_106 Output Output J4 – Relay Outputs Group 3 Error! Objects cannot be created from editing field codes. Pin Signal Name J4.1 J4.2 J4.3 J4.4 J4.5 J4.6 RELAY_20A_102 RELAY_20A_101 RELAY_20A_104 RELAY_20A_103 RELAY_20A_105 RELAY_20A_106 Input/ Output Output Output Output Output Output Output J5 – Relay Outputs 4 Error! Objects cannot be created from editing field codes. Pin Signal Name J5.1 J5.2 J5.3 J5.4 GND Input/ Output Output 12V_FUSED Output J14 - JTAG Connector This internal connector is for factory programming and software development. Pin J14.1 J14.2 J14.3 J14.4 J14.5 J14.6 Signal Description (Unused Pin) Programmer Clock Programmer Data Circuit Ground Internal +3.3V Power Master Clear – reset control PIC_PGC PIC_PGD GND +3.3V_SC PIC_MCLR General Specifications Input Activated PROG_IN_1 PROG_IN_2 PROG_IN_3 PROG_IN_4 Fob Button 1 Fob Button 2 Fob Button 3 Fob Button 4 Reaction from Hardware Tests PROG_OUT_1 activates while PROG_IN_1 is active. The software also searches for a fob near LF antenna 1 and if a fob is found RELAY_20A_1 activates for 500 msec. PROG_OUT_2 activates while PROG_IN_2 is active. PROG_OUT_3 activates while PROG_IN_3 is active. PROG_OUT_4 activates while PROG_IN_4 is active. RELAY_20A_2 activates while fob button 1 stays active. RELAY_20A_1 activates while fob button 2 stays active. PROG_OUT_3 activates while fob button 3 is pressed. PROG_OUT_4 activates while fob button 4 is pressed. PROG_IN_101 PROG_IN_102 PROG_IN_103 PROG_IN_104 PROG_IN_105 PROG_IN_106 PROG_IN_108 PROG_IN_109 KEY_SWITCH_1 KEY_SWITCH_2 PROG_IN_2 & PROG_IN_3 PROG_OUT_101 activates while PROG_IN_101 is active. PROG_OUT_102 activates while PROG_IN_102 is active. RELAY_20A_105 activates while PROG_IN_103 is active. RELAY_20A_106 activates while PROG_IN_104 is active. PROG_OUT_105 activates while PROG_IN_105 is active. PROG_OUT_106 activates while PROG_IN_106 is active. RELAY_20A_101 activates while PROG_IN_108 is active. RELAY_20A_102 activates while PROG_IN_109 is active. RELAY_20A_103 activates while KEY_SWITCH_1 is active. RELAY_20A_104 activates while KEY_SWITCH_2 is active. When both PROG_IN_2 and PROG_IN_3 are sensed active at the same time, the factory test software activates each I/O expander relay output for 1 second in the sequence RELAY_20A_101, 102, … 116. To activate inputs 1‐4 are 12V To activate all other inputs (100‐200) are grounds Power Supply Nominal Quiescent Current (no load) Nominal (load) On Board relays (active) Normal (Actuator) All ANT125 are bi‐directional. 6.5V to 16V 12V 311uA 2.5mA 30A 5A Operating Principals: Operating Principle of Wi‐Fi/Bluetooth: TriMark believes we will use this for information transfer such as communication on a smart phone. This is a future proofing accessory. Wi-Fi/Bluetooth with modular certificate , FCC ID:XF6-RS9113SB IC:8407A-RS9113SB IO Module FCC version LF will constantly generate a 125 KHz wave on channel 1 as long as it is plugged in. Do not leave on more than 4 hours at a time. Channels 2 and 3 use the same circuit, but will not be on. Bluetooth will be active during test. Wiring diagram All other IO are not populated. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with part 15 of the FCC Rules and Canada licence‐exempt RSS‐210 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le manuel d'utilisation des appareils radio exempts de licence doit contenir l'énoncé qui suit, ou l'équivalent, à un endroit bien en vue et/ou sur les appareils : Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : Lai Create Date : 2017:12:07 12:42:29+08:00 Modify Date : 2017:12:22 11:48:41+08:00 XMP Toolkit : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08 Format : application/pdf Title : Microsoft Word - TriMark to FCC; general instructions 160140 rev6.doc Creator : Lai Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:12:22 11:48:41+08:00 Producer : Acrobat Distiller 10.1.16 (Windows) Document ID : uuid:eec1140a-ba3b-4407-9606-9522834d1962 Instance ID : uuid:2e95bcde-95b5-412c-b15b-c763ed6e519b Page Count : 10EXIF Metadata provided by EXIF.tools