Tricheer Technology FS040U LTE USB Modem User Manual FS040U Manual FCC update 20170904

Download:
Mirror Download [FCC.gov]
Document ID	3589365
Application ID	mqQdxi3JFQ2jy6aCP30Hwg==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.54kB (144191 bits)
Date Submitted	2017-10-02 00:00:00
Date Available	2018-04-01 00:00:00
Creation Date	2017-09-25 18:02:59
Producing Software	GPL Ghostscript 9.10
Document Lastmod	2017-09-25 18:02:59
Document Title	FS040U_Manual_FCC_update 20170904
Document Creator	PDFCreator Version 1.7.3
Document Author:	amqian

Table of Contents
FS040U
User Manual ...................................................................... 1
1 Introduction .................................................................... 4
User Manual
2 RNDIS(web UI)................................................................ 5
1 Description for RNDIS Interface .............................. 5
3 RAS/MBIM(PC client) ..................................................... 8
1 Description for Client Interface ................................ 8
Activate Client .................................................... 8
Introduction to Interface ..................................... 9
2 Connection ............................................................ 11
Automatically connect to the network ............... 11
Customized Network Connection ..................... 11
3 Setting ................................................................... 13
Connection ....................................................... 13
PIN Management ............................................. 13
Language Setting ............................................. 14
Network Connection ......................................... 14
Diagnostics ...................................................... 15
4 Network recording ................................................. 15
Network recording ............................................ 15
5 FAQ ....................................................................... 16
4 FCC Regulations .......................................................... 18
1 Introduction
5 Remark ......................................................................... 20
The product is designed to enable PC users access to the Internet via
UMTS/HSPA/LTE networks. It uses a standard USB interface for a fast
simple connection to your PC.
System Requirements
Item
Description
Windows
Windows 7,8,10 and higher (Mac OS not
support)
Linux kernel version
RAS：2.6.x / 3.x / 4.x / later
OS
Linux
NDIS : 3.4 upper / 4.x / later
MBIM : 3.8 upper / 4.x / later
RNDIS：2.6.x / 3.x / 4.x / later
The product has two work modes, RNDIS(web UI) and RAS/MBIM(PC
client).
Icons and functions defined:
2 RNDIS(web UI)
Status information display and advanced settings area.
Icon
Explanation
1 Description for RNDIS Interface
Basic Information
Mobile Network Settings
LAN Settings
Router Settings
System Settings
Update
Status
Information
Description
Network
signal
3 RAS/MBIM(PC client)
1 Description for Client Interface
Signal display
Roaming
status
Connection
Status
Activate Client
Connected
To activate client, please double-click the shortcut icon of client on the
desktop.
Connected
Note:
Operational Instruction for PIN: If the user activates PIN under the
Unconnected
setting menu, it shall be required to input the correct PIN while
using the application procedure (totally 3 times to input PIN, if the
SIM Card Status
number is wrongly-input after 3 times, thus, PUK should be used
to decode the PIN, and the input of PUK is only 10 times, if the
number is wrongly-input after 10 times, (U)SIM will be locked or
damaged, Please contact the local operator for settlement).
(U)SIM is provided by the network operator. Please contact the
operator for more information.
Introduction to Interface
Device and
Display “Invalid” when the (U)SIM is invalid.
Network
Display “Searching” when searching the
information
network.
1. Function Icon
Display “No service” when the network can’t
The definition of function icon provided by client is as follows:
be found.
Shortcut icon
Description
Display the name of network operator after
Connection
successful network registration.
Setting
Network
Network recording
connection
status
Indicates network has been connected.
Indicates
network
hasn’t
been
connected.
2. Status Information
The status information displayed by client is as follows:
Status
3. Tray Icon
Description
Click on
Information
to close the main window, The main window can be
reopened by double clicking on the tray icon.
Indicates the signal strength of the current
The icon context menu in the tray area:
Network signal
connected network
Open: open the main window.
About: display the information of software version.
Displays when supporting HSPA
Network types
Exit: exit from the application software.
Displays when supporting UMTS
Display “No device” when the device can’t be
found.
Display “No (U)SIM ” when the (U)SIM can’t
be found.
10
1. New
2 Connection
Input the value of various parameters in the  area box, and the
profiles file is added into the connection profile list.
Auto-connection and customized-connection modes are provided to
Note: Please contact the network operator for profile information.
access to the network.
2. Predefined List
Automatically connect to the network
Select a profile in the predefined list and then add it into the connection
profile list.
If using the default connection configuration, you should connect by
dialing according to the default connection profiles.
3. Edit
1. Connect
Select one profile in the available list and then to edit.
Select connection mode: click on  for auto connection.
After the completion of connection,
bar will turn into
under the window status
4. Delete
Select one profile in the available list and then to delete it.
5. Set default
2. Disconnect
Select one item from the list of available connection profile(s).
Click on  to disconnect the connection.
Click on  to set default;
Enter into the connection interface to establish corresponding
Customized Network Connection
connection.
Click on
under the main windows, select  to
set up customized-connection.
11
12
2. Modify PIN
3 Setting
Click on  to enter into the PIN modification window
Input the original PIN;
Connection
Input new PIN and re-input for confirmation, and click on .
Note:
It can be allowed only the PIN enabled.
Click on  to display available connection profile.
1. Sound
Enabled/Disable sound prompts when Internet connection or
Language Setting
disconnecting.
2. Connection Setting
Click on  to select language, and the window will
Please refer to “Connection”. For customized-connection network
display the selected language when restart the client.
information
Network Connection
PIN Management
Network Mode
1. Enabled PIN
Click on to select, network mode defaulted is
Click on  to select Enable/Disable and activate
PIN launching or close dialog box;
auto;
Click on /< 1x only >/< 3G only > to relevant network
Input the correct PIN;
mode.
Click on  to prompt the launching or closing PIN.
13
14
Diagnostics
5 FAQ
Click on < Diagnostics > to launch the window of diagnosis information.
1.
Click on  to export this information which will be saved as*.txt
Q:
Which operation systems does the software support?
A:
It supports Windows 10, Windows 8, Windows 7.
Q:
I cannot install applications？
A:
The reasons are shown below:
file.
2.
4 Network recording
1. If automatic installation unfinished, please check whether
the antivirus and security software is working. If it is, close it
and reinstall. To those which cannot be disabled, close the
Network recording
monitor program and do not start it until installation finished.
2. On some PCs, installation of the driver may take a long
The user can view the network recording.
time because of the PC configuration. So please wait and do
not cancel or unplug the device during installation. If it failed,
uninstall the driver first and then reinstall it.
3.
Q:
The (U)SIM does not register any networks
A:
The reasons are shown below:
1. Unstable local signal;
2. The software is an old version;
3. Hardware problem.
You may:
1. Try to logon from another location;
15
16
2. Update the software;
4 FCC Regulations
3. Check the hardware or use another data card and retry.
FCC Regulations:
4.
Q:
Why does the prompt “Unavailable connection profile”
appear?
5.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
A:
Please add a connection profile manually.
Q:
It failed to connect to the internet
A:
Please make sure the connection profile and settings are
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
correct.
limits are designed to provide reasonable protection against harmful
6.
Q: The connection speed and data transfer rates are too slow
interference in a residential installation. This equipment generates, uses
A:
and can radiated radio frequency energy and, if not installed and used in
Please check the local network signal strength.
accordance with the instructions, may cause harmful interference to
7.
Q:
Why can I only save part of the name when adding a new
contact?
A:
radio communications. However, there is no guarantee that interference
will not occur in a particular installation If this equipment does cause
The inputted character exceed the maximum length of
harmful interference to radio or television reception, which can be
(U)SIM
determined by turning the equipment off and on, the user is encouraged
8.
Q:
Does it support roaming?
to try to correct the interference by one or more of the following
A:
This depends on the local operator. Please check with your
measures:
local operator or service provider.
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
17
18
which the receiver is connected.
(laptop computers), tested at 5mm separation distance to the human
-Consult the dealer or an experienced radio/TV technician for help.
body, and tested with USB slot configurations including Horizontal-UP,
Caution: Changes or modifications not expressly approved by the party
Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used
responsible
in host product(s) with substantially similar physical dimensions,
for compliance could void the user‘s authority to operate the equipment.
construction, and electrical and RF characteristics. The highest SAR
value, tested per FCC RF exposure guidelines for USB dongle, as
RF Exposure Information (SAR)
described in this user guide, is 1.13W/kg. The FCC has granted an
This device meets the government’s requirements for exposure to radio
Equipment Authorization for this device with all reported SAR levels
waves. This device is designed and manufactured not to exceed the
evaluated as in compliance with the FCC RF exposure guidelines. SAR
emission limits for exposure to radio frequency (RF) energy set by the
information on this device is on file with the FCC and can be found
Federal Communications Commission of the U.S. Government. The
under the Display Grant section of www.fcc.gov/oet/ea/fccid after
exposure standard for wireless device employs a unit of measurement
searching on.
known as the Specific Absorption Rate, or SAR. The SAR limit set by the
FCC ID: 2ANKMFS040U.
FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating
positions accepted by the FCC with the device transmitting at its highest
certified power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR level of
the device while operating can be well below the maximum value. This
5 Remark
For more detailed information of the product, please click  file of
the Setting Menu under the main window.
is because the device is designed to operate at multiple power levels so
as to use only the poser required to reach the network. In general, the
closer you are to a wireless base station antenna, the lower the power
output. SAR compliance has been established in the host product(s)
19
20

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 10
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:39bb1ca9-a434-11e7-0000-ff8a4b89498f
Producer                        : GPL Ghostscript 9.10
Keywords                        : ()
Modify Date                     : 2017:09:25 18:02:59+08:00
Create Date                     : 2017:09:25 18:02:59+08:00
Creator Tool                    : PDFCreator Version 1.7.3
Document ID                     : uuid:39bb1ca9-a434-11e7-0000-ff8a4b89498f
Format                          : application/pdf
Title                           : FS040U_Manual_FCC_update 20170904
Creator                         : amqian
Description                     : ()
Author                          : amqian
Subject                         : 

EXIF Metadata provided by EXIF.tools