Trilogy Touch Technology Commander Digital Intercom 9 Users Manual Installation Guide

2015-02-03

• 1. Introduction
  • 1.1 OPTIONS AVAILABLE AND MODULE TYPE NUMBERS
• 2. Installation
  • 2.1 INTRODUCTION
  • 2.2 UNPACKING
  • 2.3 RACK MOUNTING
  • 2.4 SYSTEM ASSEMBLY
    • 2.4.1 500-08 SERIES CHANGEOVER CARD
    • 2.4.2 500-02 SERIES TALKBACK CONTROLLER CARD
    • 2.4.3 500-01 SERIES TDM CONTROLLER CARD
    • 2.4.4 500-25-00 E1 NETWORK LINK CARD
    • 2.4.5 500-10 SERIES MISC. I/O (GPI) CARDS.
    • 2.4.6 500-06 SERIES MATRIX CARDS
  • 2.5 MAINS CONNECTION AND FUSING
    • 2.5.1 500-15-30 SERIES POWER SUPPLY
    • 2.5.2 EARTHING REQUIREMENTS
  • 2.6 STARTING THE SYSTEM
• 3. Connecting to the Matrix
  • 3.1 CONNECTING THE MATRIX PORTS
  • 3.2 CONNECTING THE PC TO THE COMMANDER SYSTEM
    • 3.2.1 CONNECTION VIA A PC COM PORT USING RS232
    • 3.2.2 CONNECTION VIA A 500-16-03 DOWNLOAD CONVERTER BOX
  • 3.3 INSTALLING PATHFINDER
  • 3.4 OTHER MATRIX CONNECTIONS
    • 3.4.1 MATRIX PORTS – RJ-45
    • 3.4.2 CAMERA CONNECTOR
    • 3.4.3 SERIAL LINK (RS232 / RS422)
    • 3.4.4 ALARMS
    • 3.4.5 MISCELLANEOUS I/O CARD CONNECTOR PIN-OUT
      • 3.4.5.1 500-10 Switches and Indicators
      • Suggested external wiring of Misc I/O card output
      • 3.4.5.3 500-25 Network Card Indicators and Switches
  • 3.5 CONFIGURING THE GAIN OF CAMERA INPUTS.
    • 3.5.1 LINK SETTING ON 500-06-02
• 4. Networking
  • 4.1 CONNECTING NETWORKED SYSTEMS
    • 4.1.1 500-26 NETWORK REAR CONNECTOR UNIT (RCU)
  • 4.2 SERIAL NETWORKING
• 5. Control Panels
  • 5.1 INTRODUCTION
  • 5.2 CURRENT RANGE
  • 5.3 CONTROL PANEL FACILITY COMPARISON TABLE
  • 5.4 500-41-XX SERIES DESKTOP PANELS
  • 5.5 500-31-51 16 KEY PLUS DIAL PAD CONTROL PANEL
    • 5.5.1 SPECIFICATION
    • 500-3X-5X SERIES STANDARD CONTROL PANEL REAR VIEW
    • 5.5.3 500-3X-5X SERIES CONTROL PANEL CONNECTIONS
    • 5.5.4 500-3X-5X SERIES DIP SWITCH SETTINGS
  • 5.6 500-43-50 12 WAY ROTARY ENCODER EXPANSION PANEL
    • 5.6.1 SPECIFICATION
    • 5.6.2 REAR CONNECTOR LAYOUT
  • 5.7 500-42-50 1U, 10 LEVER KEY PANEL WITH LED DISPLAYS.
    • 5.7.1 SPECIFICATION
    • REAR CONNECOR LAYOUT
    • 5.7.3 CONNECTIONS
  • 5.8 CONTROL PANEL GPIO EXTERNAL CIRCUITRY
  • 5.9 500-31-60 STANDARD FACILITY 16 KEY CONTROL PANEL
    • 5.9.1 SPECIFICATION
    • REAR PANEL LAYOUT
  • 5.10 500-33-00 / 500-45-00 / 500-46-00 RANGE
    • 5.10.1 SPECIFICATION
    • 5.10.2 CONNECTIONS
• 6. Commander Programming Kit
  • 6.1 INTRODUCTION
  • 6.2 TTPROG SOFTWARE
    • 6.2.1 SET-UP ROUTINE
    • 6.2.2 STARTING THE PROGRAMME
    • 6.2.3 CONNECTING THE HARDWARE
    • 6.2.4 COMPLETING THE REPROGRAM SEQUENCE
      • 6.2.4.1 500-01-10 TDM Controller
      • 6.2.4.2 500-02-1x Talkback Controller
      • 6.2.4.3 500-3x-3x Control Panels
      • 6.2.4.4 500-08-10 Changeover Card
  • 6.3 PROGRAMMING WITH THE 500-16-03 DOWNLOAD CONVERTER
• 7. Other Equipment
  • 7.1 BELTPACKS
  • 7.2 TELEPHONE INTERFACES
    • 7.2.1 TELOS ONE ALIGNMENT
  • 7.3 RT EQUIPMENT
  • 7.4 500-22-00 ICIS-1 ISDN INTERFACE
    • 7.4.1 500-22-00 ICIS-1 ISDN INTERFACE CONNECTOR PIN-OUTS
      • 7.4.1.1 Bearer 1 & Bearer 2
      • 7.4.1.2 ISDN Interface RJ45 Connector
      • 7.4.1.3 Com Port
      • 7.4.1.4 Remote Ports
      • 7.4.1.5 RJ45
  • 7.5 500-23-00 ICIS-2 ISDN INTERFACE
• 8. Legacy Hardware
  • 8.1 MATRIX CARDS
    • 8.1.1 GAIN SETTING ON 500-06-00
    • 8.1.2 GAIN SETTING ON 500-06-01
  • 8.2 POWER SUPPLIES
  • 8.3 MATRIX DOWNLOAD
    • 8.3.1 COMPUTER OPERATING SYSTEMS – IMPORTANT NOTE
    • 8.3.2 INSTALLING AN ARCHIPEL DOWNLOAD CARD IN A P.C.
    • 8.3.3 INSTALLING A CARDPORT ISA TO PCMCIA ADAPTOR INTO A DESKTOP PC
    • 8.3.4 INSTALLING A SUNDANCE SMT104 PCMCIA DOWNLOAD CARD IN A LAPTOP COMPUTER.
    • 8.3.5 BLACK BOX IC114A PCMCIA SERIAL ADAPTOR CARD.
  • 8.4 MATRIX PORTS – D9
  • 8.5 LEGACY CONTROL PANELS
    • 8.5.1 LEGACY CONTROL PANEL FACILITY COMPARISON TABLE
    • 8.5.2 500-3X-3X SERIES CONTROL PANELS
      • 8.5.2.1 500-3x-3x Series Standard Control Panel Rear View
      • 8.5.2.2 500-3x-3x Series Control Panel Connections
    • 8.5.3 500-30 SERIES DIP SWITCH SETTINGS
    • 8.5.4 500-40-0X SERIES EXPANSION PANELS
      • 8.5.4.1 Connector Pin Out
      • 8.5.4.2 500-40-0x Series Control Panel Rear View
      • 8.5.4.3 Typical expansion panel configuration
      • 8.5.4.4 500-3x-3x Series Expansion panel interconnection cables
    • 8.5.5 CONNECTING VIA STRUCTURED CABLING
    • 8.5.6 500-39-30 / 31 1U 12 KEY PANEL WITH LOUDSPEAKER
      • 8.5.6.1 500-39-30 Connector Pin Out
      • 8.5.6.2 500-39-30 Rear View
    • 8.5.7 500-3X-5X SERIES CONTROL PANELS
    • 8.5.8 500-43-51 1U, 8 REN LEVEL CONTROL PANEL
• 9. Specification
  • 9.1 GENERAL
  • 9.2 MATRIX AUDIO SPECIFICATION (USING 500-06-02 MATRIX CARDS)
  • 9.3 REAL TIME PERFORMANCE
  • 9.4 PANELS
  • 9.5 MISCELLANEOUS I/O CARD
  • 9.6 P.C.
• 10. Control Panel Configuration
  • 10.1 500-3X-5X SERIES INTERNAL PANEL SWITCH SETTINGS
  • 10.2 500-41 DESKTOP PANEL INTERNAL SETTINGS
  • 10.3 500-31-60 – PROGRAMMING CUT SWITCH OPERATION
    • 10.3.1 TEST FUNCTION
• 11. 500-16-03 Download Converter Supplementary Information
  • 11.1 SAFETY PRECAUTIONS
  • 11.2 TRANSPORTATION AND STORAGE
  • 11.3 MAINS CONNECTOR AND PLUG
  • 11.4 FUSES
  • 11.5 REMOVAL OF COVERS
  • 11.6 BAUD RATE
  • 11.7 LOOP BACK TEST MODE