Trimble Outdoors R7 Users Manual R7/R8 GPS Receiver User Guide

2015-02-03

• Trimble® R7/R8 GPS Receiver User Guide
• Introduction
  • Related Information
  • Warnings and Cautions
  • Technical Assistance
  • Your Comments
• Trimble R7 GPS Receiver
• Overview
  • Introduction
  • Features
  • Use and Care
  • COCOM Limits
• Setting up the Receiver
  • Introduction
  • Parts of the Receiver
    • Front panel
    • Rear panel
    • Top panel
    • Bottom panel
  • Setup Guidelines
    • Environmental conditions
    • Sources of electrical interference
    • General guidelines
  • Postprocessed Setup
  • PoleMounted Setup
  • Backpack Setup
  • Other System Components
    • Radios
    • Cellular modems
    • Antennas
    • CompactFlash cards
• General Operation
  • Introduction
  • Button Functions
  • LED Behavior
    • Logging/Memory LED
    • SV Tracking LED
    • Radio LED
    • Battery 1 LED and Battery 2 LED
  • Starting and Stopping the Receiver
  • Logging Data
    • Logging internally
    • Logging to a Trimble controller
  • Resetting to Defaults
  • Formatting a CompactFlash Card
  • Batteries and Power
    • Battery charging and storage
    • Operating with the TSC1/TSCe controller
    • Power output
    • Firmware
• Configuration
  • Introduction
  • Configuring the Receiver in Real Time
  • Configuring the Receiver Using Application Files
  • Application Files
    • Special application files
    • Timed application files
    • Applying application files
    • Storing application files
    • Naming application files
• Transferring Data
  • Introduction
  • Connecting to the Office Computer
  • Transferring Data
  • Transferring Files Directly from a CompactFlash Card
  • Deleting Files in the Receiver
  • Supported File Types
• Software Utilities
  • Introduction
  • GPS Configurator Software
    • Installing GPS Configurator
    • Configuring the Trimble R7 receiver
  • WinFlash Software
    • Installing WinFlash
    • Upgrading firmware
    • Adding frequencies for the 450 MHz internal radio
    • Configuring the internal 900 MHz radio setup
• Specifications
  • Introduction
  • Physical Specifications
  • Positioning Specifications
  • Technical Specifications
• Default Settings
  • Introduction
  • Default Settings
  • Resetting to Factory Defaults
  • Examples
    • Default behavior
    • Power up settings
    • Logging after power loss
    • Disabling logging
    • Application files
• Cables and Connectors
  • Introduction
  • Port 1, 2, and 3 Connectors
  • Power/serial data cable
  • Event Marker/1PPS Cable
  • GPS Antennas and Cables
• Event Marker Input and 1PPS Output
  • Introduction
  • Event Marker Input
    • Enabling and configuring event marker input
  • 1PPS Output
    • 1PPS pulse definition
    • ASCII time tag definition
    • Enabling and configuring 1PPS output
• Trimble R8 GPS Receiver
• Overview
  • Introduction
  • Features
  • Use and Care
  • COCOM Limits
• Setting up the Receiver
  • Introduction
  • Parts of the Receiver
    • Front panel
    • Lower housing
  • Setup Guidelines
    • Environmental conditions
    • Sources of electrical interference
    • General guidelines
  • PoleMounted Setup
  • Other System Components
    • Radios
    • Cellular modems and external radios
• General Operation
  • Introduction
  • Button Functions
  • LED Behavior
    • LED flash patterns
  • Starting and Stopping the Receiver
  • Logging Data
    • Logging internally
    • Logging to a Trimble controller
  • Resetting to Defaults
  • Batteries and Power
    • Battery charging and storage
    • Power output
    • Firmware
• Configuration
  • Introduction
  • Configuring the Receiver in Real Time
  • Configuring the Receiver Using Application Files
  • Application Files
    • Special application files
    • Applying application files
    • Storing application files
    • Naming application files
• Software Utilities
  • Introduction
  • GPS Configurator Software
    • Installing GPS Configurator
    • Configuring the Trimble R8 receiver
  • WinFlash Software
    • Installing WinFlash
    • Upgrading firmware
    • Adding frequencies for the 450 MHz internal radio
    • Configuring the internal 900 MHz radio setup
    • Configuring the internal transceiver
• Specifications
  • Introduction
  • Physical Specifications
  • Positioning Specifications
  • Technical Specifications
• Default Settings
  • Introduction
  • Default Settings
  • Resetting to Factory Defaults
    • Default behavior
    • Power up settings
• Cables and Connectors
  • Introduction
  • Port 1 and 2 Connectors
  • Power/Serial Data Cables
• Appendixes Trimble R7 / Trimble R8
• NMEA-0183 Output
  • Introduction
  • NMEA-0183 Outputs
  • Common Message Elements
    • Message values
  • NMEA Messages
• RTCM Output
  • RTCM Output
  • Message Scheduling
• Troubleshooting
• Index