Trimble 66400 PDA User Manual JunoSeries v1 Rev1

Trimble Navigation Ltd PDA JunoSeries v1 Rev1

Contents

Users Manual 2

CHAPTER4Juno Series User Guide 51Connecting to an Office Computer 4In this chapter:Connection management softwareConnecting the handheld to a computerManaging the connection using the Windows Mobile Device CenterManaging the connection using ActiveSync technologyInstalling software onto the handheldConnect the Juno series handheld to an office computer to transfer information, settings, and files from one device to the other, or to install software onto the handheld.You can connect the handheld to a computer using the USB cable or a Bluetooth wireless link.To protect your data, Trimble recommends that you regularly copy important data to an office computer.
4 Connecting to an Office Computer52 Juno Series User GuideConnection management softwareTo install software onto a Windows Mobile powered device, or to copy files between the handheld and a computer, you must connect the device to an office computer. If the computer is running:•the Windows Vista® operating system, use the Windows Mobile Device Center to manage the connection.•the Windows® XP or 2000 operating system, use ActiveSync technology to manage the connection.Note – You must install the Windows Mobile Device Center or ActiveSync technology onto the computer before you connect the handheld.This connection management software also enables you to synchronize office applications on an office computer with the handheld.CCAUTION – The available space on the handheld is small compared to an office computer. To avoid accidentally synchronizing the handheld with a large amount of data on the office computer, Trimble recommends that you either connect to the handheld without forming a partnership, or that you limit the information types and amount of data that is synchronized.CCAUTION – Synchronizing data is designed to keep the same data on both the office computer and the handheld. Exercise care when resynchronizing applications after deleting data from one computer, as resynchronizing will delete the same information from the other computer.For more information see one of the following:•Managing the connection using the Windows Mobile Device Center, page 54•Managing the connection using ActiveSync technology, page 55.Installing the Windows Mobile Device CenterThe Windows Vista operating system includes a basic connectivity driver for Windows Mobile powered devices. This driver allows you to transfer files from the handheld to an office computer. To install software onto a Windows Mobile powered device, you must install Windows Mobile Device Center 6 onto an office computer.A copy of the Windows Mobile Device Center is provided on the Juno Series Getting Started Disc. Alternatively, go to www.microsoft.com/windowsmobile/devicecenter.mspx to download the latest version from the Microsoft website.
Juno Series User Guide 53Connecting to an Office Computer 4Installing ActiveSync technology A copy of ActiveSync technology is provided on the Juno Series Getting Started Disc. Alternatively, go to www.microsoft.com/windowsmobile/activesync/default.mspx to download the latest version from the Microsoft website.Connecting the handheld to a computerTo connect the Juno series handheld to a computer:1. Make sure that the handheld and the computer are switched on.2. Make sure you have installed the appropriate connection management software onto the computer (see Connection management software, page 52). 3. To form a connection, do one of the following:–Use the handheld's integrated Bluetooth radio to establish a wireless serial link to a Bluetooth-enabled computer. For more information, see Connecting to an office computer to use ActiveSync technology, page 89.–Use a USB connection: a. Connect the USB data cable to the USB port on the handheld.b. Connect the other end of the USB data cable to a USB port on the computer. When the handheld and the computer are connected, you can manage the connection through a window that appears on the office computer. See one of the following:
4 Connecting to an Office Computer54 Juno Series User Guide–Managing the connection using the Windows Mobile Device Center, page 54–Managing the connection using ActiveSync technology, page 55Managing the connection using the Windows Mobile Device Center1. Connect the handheld to the computer (see page 53). 2. If the Autoplay window appears, close the window. 3. The Windows Mobile Device Center window displays the message Connected: Note – If the connection is not made automatically, check that the connection is enabled in the Windows Mobile Device Center software and on the handheld. For more information, see Troubleshooting, page 99.4. Do one of the following:–To synchronize files and data between the handheld and a computer, click Set up your device and then follow the instructions on screen. –To transfer data between the handheld and the computer without synchronizing the devices, click Connect without setting up your device.5. To transfer files between the computer and the handheld, click File Management. A Windows Explorer-type window appears, displaying files stored on the handheld. Copy and paste files to other locations on the computer, or from the computer to the handheld.6. To install software onto the handheld, see Installing software onto the handheld, page 57.7. To uninstall software from the handheld, click Programs and Services and then click Add/Remove Programs.
Juno Series User Guide 55Connecting to an Office Computer 4BTip – If the Add/Remove Programs option does not appear below Programs and Services, click More. The Add/Remove Programs option appears.For more information, refer to the Windows Mobile Device Center Help. BTip – If the GPS Pathfinder Office software is installed on the office computer, you can configure the Connection Manager utility in the GPS Pathfinder Office software to automatically detect when you connect a Juno series handheld to the computer. This enables you to automatically transfer data from the TerraSync software, differentially correct the data, and then export it to a GIS. For more information, refer to the GPS Pathfinder Office Software Help.Managing the connection using ActiveSync technology1. Connect the handheld to the computer (see page 53). The Synchronization Setup Wizard appears: Note – If the connection is not made automatically, check that the connection is enabled in the ActiveSync software and on the handheld. For more information, see Troubleshooting, page 99.2. Do one of the following:–To synchronize files and data between the handheld and a computer, click Next and then follow the instructions in the Synchronization Setup Wizard. –To transfer data between the handheld and the computer without synchronizing the devices, click Cancel to close the wizard.
4 Connecting to an Office Computer56 Juno Series User Guide3. The Microsoft ActiveSync window displays the message Connected: 4. To transfer files between the computer and the handheld, click Explore. A Windows Explorer-type window appears, displaying files stored on the handheld. Copy and paste files to other locations on the computer, or from the computer to the handheld.5. To install software onto the handheld, see Installing software onto the handheld, page 57.6. To uninstall software from the handheld, select Add/Remove Programs from the Tools menu. Clear the check box beside the program you want to remove and then click OK.For more information, refer to the ActiveSync Help. BTip – If the GPS Pathfinder Office software is installed on the office computer, you can configure the Connection Manager utility in the GPS Pathfinder Office software to automatically detect when you connect a Juno series handheld to the computer. This enables you to automatically transfer data from the TerraSync software, differentially correct the data, and then export it to a GIS. For more information, refer to the GPS Pathfinder Office Software Help.
Juno Series User Guide 57Connecting to an Office Computer 4Installing software onto the handheldBefore you begin, refer to the installation instructions provided with the software.Some software installations are specifically designed to run on a Windows Mobile powered device. To install software that has a Windows Mobile installation setup:1. Connect the handheld to a computer (see page 53). 2. Copy the installation files to a folder on the handheld. 3. Browse to the folder on the handheld. Tap and hold the installation setup file and then select Run.4. If prompted after installation, perform a soft reset of the handheld (see page 30).To install software that is provided on a CD, or as an installation setup that runs on an office computer:1. Connect the handheld to a computer (see page 53). 2. If the software is provided on a CD, insert the software CD into the office computer.3. Run the installation setup. 4. If prompted, select the install option for a Windows Mobile powered device. Once the software is installed on the computer, it is automatically transferred to the handheld.Note – If a memory card is inserted in the handheld, the card appears as an installation location option. Trimble recommends that you install software to the handheld’s storage memory, not to a memory card. If you install software to a card and then remove the card from the handheld, the software will not be available for use.5. If prompted after installation, perform a soft reset of the handheld (see page 30).
4 Connecting to an Office Computer58 Juno Series User Guide
CHAPTER5Juno Series User Guide 59Using the GPS receiver 5In this chapter:Supported GPS field softwareConfiguring the GPS field software to connect to the receiverUsing the GPS field softwareEnsuring the accuracy of your GPS dataDifferential GPS explainedOutputting NMEA dataThe Juno series handheld includes an integrated GPS receiver that enables you to collect GPS data for incorporating into a GIS or for managing assets.The Global Positioning System (GPS) is a satellite-based positioning system consisting of a constellation of operational NAVSTAR satellites that orbit the earth every 12 hours. This system provides worldwide, all-weather, 24-hour time and position information. Note – To receive signals from GPS satellites, the handheld must have a clear view of the sky. GPS positions may not always be available, particularly in or near buildings, in vehicles, or under tree canopy.
5 Using the GPS receiver60 Juno Series User GuideSupported GPS field softwareYou can use the Juno series handheld with any of the software products described below. TerraSync softwareYou can install version 3.30 or later of the TerraSync software on a Juno series handheld. Use the software to collect and maintain GIS and GPS data.To install the TerraSync software, either insert the TerraSync Software CD in the CD-ROM drive of a computer and use the menus provided, or run the downloaded setup file. To obtain an installation code for installation, you must register your copy of the software online. Detailed installation instructions are provided in the TerraSync Software Getting Started Guide.ESRI ArcPad software and the Trimble GPScorrect extensionYou can install version 7.1.0 or later of the ESRI ArcPad software on a Juno series handheld. Use the software to collect and maintain GIS and GPS data. Detailed installation instructions for ESRI ArcPad software are provided in the ArcPad documentation. To be able to differentially correct ArcPad GPS data, install version 2.42 or later of the Trimble GPScorrect extension for ESRI ArcPad software on a Juno series handheld. You must install the ArcPad software before you install the GPScorrect extension.Note – Make sure your version of the GPScorrect extension is compatible with the version of ArcPad software you are using. For more information, go to www.trimble.com/gpscorrect_ts.asp, click Support Notes and then search for the Mapping and GIS Product Compatibility List Support Note. To install the GPScorrect extension, either insert the Trimble GPScorrect Extension for ESRI ArcPad Software CD in the CD-ROM drive of a computer and use the menus provided, or run the downloaded setup file. Detailed installation instructions are provided in the Trimble GPScorrect Extension Getting Started Guide.GPS Controller softwareYou can install version 2.21 or later of the GPS Controller software on a Juno series handheld. Use the software to configure and monitor the status of the internal GPS receiver.To install the GPS Controller software, go to www.trimble.com/support.shtml. Click GPS Controller and then click Downloads. Click the link for the version you want to install and then follow the instructions in the Installation wizard.
Juno Series User Guide 61Using the GPS receiver 5Other GPS field applicationsYou can use the Juno series handheld with a custom application developed using version 2.32 or later of the Trimble GPS Pathfinder Tools Software Development Kit (SDK).You can also use the Juno series handheld with any GPS field software that accepts NMEA messages.Configuring the GPS field software to connect to the receiverThe first time you use GPS field software on the handheld, you may need to configure the software to connect to COM4, which is the GPS port on the handheld.Connecting to the COM portDetails of how to configure different types of GPS field software to connect to the GPS COM port are as follows: Using the GPS field softwareDepending on the GPS field software you have installed, you can use the software to view satellite reception, configure logging settings, and collect features. For more information, refer to the rest of this chapter and the documentation for the GPS field software.GPS field software Configuration detailsGPS Controller Run GPS Controller. The software automatically activates the integrated GPS receiver on COM4. TerraSync Run Terrasync. The software automatically activates the integrated GPS receiver on COM4.ArcPad with the GPScorrect extensionWhen the Trimble GPScorrect extension is installed, the extension automatically configures the ArcPad software to use the integrated GPS receiver on COM4 using the Trimble GPScorrect protocol. To connect to GPS, tap the GPS button and then tap Yes.To configure a real-time DGPS source, or to view status information, run the GPScorrect extension. To do this, tap the GPScorrect button in the Trimble toolbar.ArcPad 7 without the GPScorrect extension1. In ArcPad, tap the GPS drop-down menu and then select GPS Preferences from the drop-down menu. Tap the GPS tab.2. In the Protocol field, select NMEA 0183.3. In the Port field, select COM4.4. Tap OK.5. Tap the GPS button and then tap Yes. NMEA application Configure the software to connect to GPS on COM4 and then use the Connect or Activate GPS command.
5 Using the GPS receiver62 Juno Series User GuideStarting the GPS field software•Tap / Programs and then select the GPS field software, for example GPS Controller.When you first open any Trimble GPS field software, the Skyplot section is displayed.Viewing available GPS satellitesUse the graphical Skyplot section or the Satellite Info section in the Trimble GPS field software to view detailed GPS information.Note – To receive signals from GPS satellites, the handheld must have a clear view of the sky. GPS positions may not always be available, particularly in or near buildings, in vehicles, or under tree canopy.Resetting the GPS receiverTrimble GPS field applications all have options to reset the receiver to:•delete the almanac•delete information stored on the last known position•restart the receiver•reset the GPS receiver to factory default settingsEnsuring the accuracy of your GPS dataThe Juno series handheld has an integrated GPS receiver that provides accurate positioning with real-time or postprocessed differential correction of between two and five meters.The accuracy that you obtain from your Juno series handheld is affected by a number of factors, including whether the data is differentially corrected in real-time or after data collection, and the availability of GPS satellites in the sky when you collect the data.The list below identifies the most important settings and techniques that you can use in the field to improve the accuracy of your data:1. If you are using TerraSync software to collect data, use accuracy-based logging. For more information, see page 63.2. Use real-time differential SBAS corrections. For more information, see page 64.Plan GPS data collection around the times of the day when satellite geometry is best. For more information, see page 65.
Juno Series User Guide 63Using the GPS receiver 5Using accuracy-based loggingIf you are using the TerraSync software, use accuracy-based logging to ensure that only GPS positions that meet the specified estimated accuracy are logged. GPS positions that do not meet your accuracy requirements are not logged.Note – Accuracy estimates for streaming (dynamic) GPS positions may not be as good as those for static GPS positions.To configure accuracy-based logging in the TerraSync software:1. In the Setup section of the TerraSync software, tap Logging Settings. The Logging Settings form appears.2. Tap the Setup button below the Accuracy Settings field. The Accuracy Settings form appears.3. In the Accuracy Value For Display/Logging fields, select the parameters that will be used to determine the estimated accuracy: –Select whether to use the horizontal or vertical accuracy of the current GPS position.–Select In the field to use the current estimated accuracy (recommended if you are using a real-time correction source), or select Postprocessed to use the predicted estimated accuracy that will be achieved after the field data has been postprocessed.4. If you selected Postprocessed, select the estimated distance to the base station that will be used for postprocessing from the Postprocessing Base Distance field. If you will use more than one base station (during H-Star processing), specify the estimated distance to the closest base station.5. Set the Use Accuracy-based Logging field to Yes. The settings fields for accuracy-based logging appear.6. In the Apply Accuracy-based Logging To field, select the feature types that you want to log only if the GPS positions meet your required accuracy.7. In the Required Accuracy field, select the estimated accuracy that is required before GPS positions are logged.8. Tap OK.Note – Accuracy settings do not affect GPS positions that are used for navigation. GPS positions are still calculated by the GPS receiver and are available for navigation.
5 Using the GPS receiver64 Juno Series User GuideConnecting to a real-time differential correction sourceUse a real-time differential GPS (DGPS) source to give you better accuracy as you collect data. For more information about how real-time differential GPS works, see Differential GPS explained, page 65.Using SBAS correctionsThe Juno series handheld has an integrated receiver that uses Satellite Based Augmentation Systems (SBAS) correction messages to improve the accuracy and integrity of GPS data. The SBAS tracking mode is Auto. In Auto mode, the receiver tracks or locks onto the most powerful satellite signal. The GPS receiver can track two SBAS satellites at the same time in Auto mode. It uses corrections from only one SBAS satellite at a time, but tracking two satellites can improve the availability of SBAS real-time corrections. For example, if you are working in environments where obstacles may block the direct line of sight to the SBAS satellite, there is less chance of signal loss if you are tracking more than one SBAS satellite.The receiver tracks SBAS satellites according to your geographical location:•Wide Area Augmentation System (WAAS) satellites are tracked in the Continental United States including Alaska, and parts of Canada and Mexico.•European Geostationary Navigation Overlay Service (EGNOS) satellites are tracked in Europe. •MTSAT Satellite-based Augmentation System (MSAS) satellites are tracked in Japan.Note – If you have other Trimble GPS field software installed, configure real-time correction settings in that application instead of the GPS Controller software.To use SBAS corrections: 1. In the GPS field software, open the Real-time section and tap the Setup button .2. In the Choice 1 field, select Integrated SBAS. 3. In the Choice 2 field, specify whether to use uncorrected positions, or to stop using GPS positions, if corrections are not available. 4. Tap OK.
Juno Series User Guide 65Using the GPS receiver 5Planning a data collection sessionTo maximize productivity, plan GPS data collection around the times of the day when satellite geometry is best. The GPS Controller software includes a Plan section with an animated skyplot and DOP (satellite geometry) graph for your position for the next 12 hours. In the Plan section, you can check the planning skyplot as you play a session, then use the timeline to zoom in on times when geometry is poor. Note – If you have other Trimble GPS field software installed, use the planning feature in that application instead of the GPS Controller software.Differential GPS explainedUse differential GPS to correct errors in your collected data. Differential GPS (DGPS) requires one or more additional receivers, called base stations or reference stations, which are located at known points. Data collected at the base stations is used to determine GPS measurement errors and compute corrections to these errors. An unlimited number of mobile GPS receivers, called rovers, collect GPS data at unknown locations within the vicinity of the base station. Errors common at both the base station and the rover receiver are corrected with DGPS either in real time or during postprocessing.Real-time DGPSIn real-time DGPS, the base station calculates and broadcasts the error for each satellite as each measurement is received, enabling you to apply corrections while in the field and collect accurate GPS data. DGPS corrections are available from a variety of public and commercial sources. They can be generated and broadcast in real-time by privately or self-owned GPS base stations, or by a wide range of government agencies. Real-time DGPS corrections can be used on the Juno Series handheld from Satellite Based Augmentation Systems (SBAS) such as WAAS in the US and EGNOS in Europe. SBAS uses multiple base stations to calculate the DGPS corrections that are then delivered to the user from a Geostationary satellite.Factors that affect real-time DGPS accuracy include how often the corrections are updated, how far you are from the base station, and whether the coordinate system used by the correction source matches the coordinate system used by the GPS receiver.
5 Using the GPS receiver66 Juno Series User GuidePostprocessed DGPSIn postprocessed DGPS, the collected GPS data is transferred to an office computer, and measurements from the base station are downloaded. You can postprocess GPS data collected with Trimble GPS field software using:•the GPS Pathfinder Office software version 4.10 (with the latest updates) or later.•the Trimble GPS Analyst extension for ESRI ArcGIS software version 2.10 (with the latest updates) or later.Factors that affect the accuracy of postprocessed DGPS include the type of receiver and antenna used at the base station, the distance between the base station and the location where the rover data was collected, the accuracy of the base station position, and the logging interval at the base station.For more information, refer to the documentation provided with the postprocessing software.Postprocessed real-time DGPSThe accuracy of positions using the Juno series handheld is within 2 to 5 meters, whether it is corrected in real-time or postprocessed. The accuracy cannot be improved beyond this by postprocessing real-time SBAS corrected positions. However, if your data files contain autonomous (uncorrected) positions as well as real-time corrected positions, Trimble recommends that you postprocess the data. During postprocessing, you can choose whether to correct only autonomous positions, or all positions. For more information about GPS and DGPS, go to www.trimble.com/gps and review the All About GPS tutorial.Outputting NMEA dataYou can use the Juno series handheld’s integrated GPS receiver with any GPS field software that accepts NMEA messages.If you connect to the GPS receiver using Trimble GPS field software, by default the NMEA output is switched off.Note – You can only configure NMEA data output using the GPS Controller software. The software is provided free from the Trimble website. For more information, see GPS Controller software, page 60.
Juno Series User Guide 67Using the GPS receiver 5To enable NMEA data to be output:1. In the GPS Settings form, set the NMEA Output field to On.2. Tap the Setup button that appears next to the NMEA Output field. The NMEA Output Settings appears.3. Configure the NMEA message output settings.4. Tap OK.For more information, refer to the GPS Controller Help.
5 Using the GPS receiver68 Juno Series User Guide
CHAPTER6Juno Series User Guide 69Getting Connected 6In this chapter:General wireless connection informationOptions for connecting wirelessly to other devices and networksBluetooth wireless connections explainedThe Juno series handheld includes an integrated wireless LAN radio and an integrated Bluetooth radio, and provides a number of options for connecting to networks and other devices. In addition, the Juno SC handheld includes an integrated cellular modem for sending and receiving data.This chapter describes how to enable the radios, and the main connectivity options available.Use the table on page 75 to identify the wireless connection type you want to make and then follow the steps provided to connect to that device.You can use the handheld’s integrated wireless LAN radio to connect to the Internet or a corporate network using a wireless LAN (Local Area Network) connection.Alternatively, you can use Bluetooth wireless technology to connect to the Internet using a cellular phone, or to other Bluetooth-enabled devices such as, a laser rangefinder, or a barcode scanner.The cellular modem in the Juno SC handheld can be used to communicate between field and office and send e-mail messages using a data connection from your local cellular provider.
6 Getting Connected70 Juno Series User GuideGeneral wireless connection informationThe Juno series handheld has an integrated wireless LAN radio compliant with IEEE 802.11 b/g and an integrated Bluetooth radio. The Juno SC handheld also has a cellular modem. To use the wireless LAN, Bluetooth radio, or cellular modem, you need to turn it on (see Turning on and turning off the integrated radios below). Turning on and turning off the integrated radiosYou can use the Wireless Manager application to turn on and turn off the Juno series handheld’s wireless LAN radio and/or Bluetooth radio (see page 70).You can use the Modem Control application to turn on and turn off the Juno SC handheld’s cellular modem (see page 71).You can also turn on or turn off the Bluetooth radio from within the Bluetooth application (see Turning on and turning off the Bluetooth radio from within the Bluetooth application, page 73).To make the Juno series handheld visible to other Bluetooth-enabled devices and enable them to connect, see page 74.Using the Wireless ManagerYou can use the Wireless Manager application to turn on and turn off the Juno series handheld’s wireless LAN radio and/or Bluetooth radio. You can turn on and turn off both radios at the same time, or control each radio individually.To open the Wireless Manager, do one of the following: •Tap the Wi-Fi icon or the Bluetooth icon in the Today screen.•Tap , , or in the title bar and then tap Wireless Manager.•Tap / Settings /Connections /Wireless Manager.Turn on the wireless LAN radio and/or Bluetooth radio to be able to connect to other devices or networks.Turn off the wireless LAN radio and/or Bluetooth radio to prevent the handheld from sending or receiving wireless signals. BTip – To conserve power, turn off the wireless LAN radio and/or the Bluetooth radio when not in use.
Juno Series User Guide 71Getting Connected 6To turn on or turn off the radios using the Wireless Manager1. Open the Wireless Manager (see above). 2. Do one of the following:–Tap All at the top of the screen to turn on both radios, or to turn off both radios if they are already on.–Tap Wi-Fi or Bluetooth to turn on the radio that you want to use, or to turn off the radio if it is already on.The status fields below the Wi-Fi button and the Bluetooth button change from Off when the radios are turned on and show the current state of the radio. The Wi-Fi status field shows Connecting or Available, and the Bluetooth status field shows On or Visible.3. Tap Done to exit the Wireless Manager.After you turn on the wireless LAN radio, the wireless LAN icon appears in the title bar to indicate that the wireless LAN radio is enabled. A second icon appears if a wireless LAN network is detected, and a Notification for the detected network may appear in the left softkey.Using the Modem ControlYou can use the Modem Control application to turn on and turn off the Juno SC handheld’s cellular modem, enter a PIN for the SIM card, or change the dial string to connect with the cellular network.To open the Modem Control, do one of the following: •Tap the Modem Control indicator in the Today screen.•Tap / Settings /Connections /Modem Control.Turn on the cellular modem to be able to connect to a cellular network.Turn off the cellular modem to prevent the handheld from sending or receiving wireless signals. BTip – To conserve power, turn off the cellular modem when not in use.To turn on or turn off the modem using the Modem Control1. Open the Modem Control (see above)2. The modem’s current status will show on the top line, as Modem Power On or Modem Power Off.3. To change the status from On to Off, tap the line Modem Power On. The status will then change to Modem Power Off.4. Tap Exit to close the Modem Control.
6 Getting Connected72 Juno Series User GuideAfter you turn on the cellular modem, the Modem Status icon will change from to indicate the type of network coverage. For more information, see Modem status indicators, page 37.Setting a PINYou can help to keep data secure by configuring your SIM card with a PIN (personal identification number). You will need to enter the PIN each time the modem is turned on.Most SIM cards are preset with a PIN that is assigned by your wireless service provider. You will need to enter this PIN first.To set a PIN:1. Open the Modem Control (see above).2. Tap PIN Settings.3. Enter the preset PIN assigned by your wireless service provider.4. Tap OK.To add a PIN:•Select the Require PIN when phone is used check box. You are to enter a PIN (see page 72).To change a PIN:1. Tap Change PIN. 2. Enter the current PIN before entering the new PIN.
Juno Series User Guide 73Getting Connected 6Dial string editorSome carriers do not require a custom dial string to establish an Internet connection. Your service provider can provide you with specific connection details, which may include:•A username and password.•The carrier’s access point name (APN).•The “phone number” required to establish a connection.•Any additional required dial string.To configure the dial string settings:1. Enter the custom dial string in the format +cgdcont=1,"IP","APN" where APN is the access point name of your carrier.2. Tap Apply to save your changes.3. Tap OK to close the Dial String Editor.When you set up a new Internet connection, the custom dial string that you have just saved is sent to the modem when you attempt to connect to the Internet.Turning on and turning off the Bluetooth radio from within the Bluetooth application1. Tap / Settings / Connections /Bluetooth. 2. Tap the Mode tab.3. Select the Turn on Bluetooth check box to turn on the radio, or clear this check box to turn off the radio.4. Tap OK.Note – If the integrated Bluetooth radio is deactivated, the message Problem with Bluetooth hardware may appear when you try to turn on the Bluetooth radio or discover devices.
6 Getting Connected74 Juno Series User GuideMaking the handheld visible (discoverable) to other Bluetooth devicesTo allow other Bluetooth-enabled devices to connect to the Juno series handheld, or if the handheld will not connect to or pair with another device you are attempting to connect to, you must make the handheld visible (this is sometimes referred to as “discoverable”).To make the handheld visible to other devices:1. Tap / Settings / Connections /Bluetooth.2. Tap the Mode tab.3. Select the Turn on Bluetooth check box, if it is not already selected. This enables the integrated Bluetooth radio.4. Select the Make this device visible to other devices check box. 5. Tap OK.
Juno Series User Guide 75Getting Connected 6Options for connecting wirelessly to other devices and networksThe Juno series handheld has an integrated wireless LAN radio and an integrated Bluetooth radio that you can use to connect to other devices and networks. In addition, the Juno SC handheld includes an integrated cellular modem for data connections.A wireless LAN access point or the Juno SC handheld’s integrated cellular modem can be used to connect to the Internet (at broadband speeds) or a corporate network to:•browse the Internet or an Intranet•send and receive e-mail and instant messages•access files on the networkWireless LAN Access points are also known as “hotspots”. Wireless LAN is often referred to as Wi-Fi.You can use Bluetooth wireless technology to connect to other Bluetooth-enabled devices that are within range (typically within 5 m to 10 m of the handheld). You can connect to:•Bluetooth-enabled devices such as cellular phones to access the Internet and receive data•computers and other handheld devices to exchange files•other devices such as a GeoBeacon receiver, laser rangefinder or barcode scannerThe following table lists devices you can connect to using the handheld, and where to find detailed information on how to achieve these connections.Connection method To... See...Wireless LAN Connect to a wireless LAN access point page 76Juno SC cellular modem Connect to a cellular network page 77Bluetooth wireless technologyConnect to another Bluetooth-enabled device (paired and non-paired connections)page 79Connect to a Bluetooth-enabled phone for Internet access page 82Connect to a Bluetooth-enabled serial device page 87Connect to an office computer to use ActiveSync technology page 89Beam files to or from another device page 92Wireless LAN or Bluetooth wireless technology or Juno SC cellular modemAccess a corporate network through your Internet connection page 93
6 Getting Connected76 Juno Series User GuideConnecting to a wireless LAN access pointTo connect to a wireless LAN access point, you must:1. Set up the wireless LAN connection2. Connect to the wireless LAN network or access point.Note – If you have installed a personal certificate on the handheld, you do not need to set up the wireless connection manually as described in Step 1. To connect to the network or access point go to Step 2: Connecting to the network or access point.Step 1: Setting up the wireless LAN connection1. Make sure that the Juno series handheld’s wireless LAN radio is enabled (see page 70). 2. Tap / Settings /Connections /Network Cards.3. Select the Wireless tab. Any networks that you have already configured are displayed in the list of preferred networks. 4. To add a new network, tap Add New. To change the settings for an existing network, tap the network.5. Enter the name of the network and other connection details and then tap Next.6. To use authentication, select the authentication method from the Authentication list.7. To use data encryption, select an encryption method from the Data encryption list.8. To automatically use a network key, select the check box for The key is automatically provided. Otherwise, enter the network key.9. Tap Next.10. For increased security, select the Use IEEE 802.1x network access control check box and then configure additional authentication information. 11. Tap Finish. Step 2: Connecting to the network or access point1. Disconnect the USB data cable as the handheld prioritizes a USB connection over a wireless LAN connection.2. Bring the handheld within range of the network or access point.When a wireless LAN is detected, the access point icon on the title bar is animated, and a notification message appears on the left softkey.
Juno Series User Guide 77Getting Connected 6If the access point icon or the notification does not appear, use the Wireless Manager to turn off and then turn back on the wireless LAN radio. When the wireless LAN radio is turned on, any networks or access points within range are detected and the icon and notification appear.3. Tap the access point icon on the title bar or tap Notification on the left softkey. A popup message shows the available networks.4. Select the network you want to connect to and then tap OK on the left softkey.5. Select The Internet (or work via a VPN) or Work and then tap Connect on the left softkey.6. If a Network Log On screen appears, enter your user name, password, and domain information and then tap OK on the left softkey.When the handheld is connected to the network or access point, the wireless LAN connected icon appears in the title bar.7. Start using the program you want to use, for example Windows Explorer Mobile or Internet Explorer. Note – To disconnect from the network or an access point at any time, turn off the handheld’s wireless radio. To do this, tap the wireless LAN connected icon in the title bar, select Wireless Manager and then tap the Wi-Fi button.BTip – To delete a wireless LAN connection, tap and hold the connection in the Wireless tab of the Network Cards screen and then select Delete. Connecting to a cellular network from the modemUse the Juno SC handheld’s cellular modem to connect to a cellular network and access the Internet or a company network. Use this type of connection to access a background map server, or for Internet and e-mail access.Note – The Juno SC handheld’s cellular modem can only be used to transmit data, and does not have voice functionality or the ability to send SMS, MMS, or text messages (Multimedia Messaging Service). It is recommended to request the data-only plan from your service provider and have a “voice restriction” placed on your line.To connect to a cellular network, you must:1. Configure the connection to the network.2. Connect to the cellular network.Note – Before you begin the steps below, Trimble recommends that you confirm that the modem can access the Internet directly. If necessary, contact your service provider and confirm whether you must enter a user name, password, and domain details when connecting.
6 Getting Connected78 Juno Series User GuideStep 1: Configuring the connection to the network1. On the handheld, tap / Settings / Connections /Connections.2. Below My ISP, tap Add a new modem connection. 3. Enter the name for the connection.4. From the Select a Modem dropdown list, select HC-25 MODEM and then tap Next on the right softkey.5. Enter the GPRS access number for the Internet.Two of the common GPRS access numbers for GSM networks are *99***1# and *99#. If these access numbers do not work, contact the cellular service provider to obtain the appropriate number to use. 6. Tap Next on the right softkey.7. Unless the phone provider confirmed that you must enter the user name, password, and domain settings to access the Internet, tap Finish on the right softkey without entering any information on this screen.Otherwise:a. Enter the required information.b. If the service provider has told you that you need to change the baud rate or other settings for the connection, tap Advanced, configure these settings and then tap OK in the top right corner of the screen.c. Tap Finish on the right softkey.You are returned to the Connections screen.You have now configured the connection.Step 2: Connecting to the Internet using the cellular network1. On the handheld, go to the Connections screen, if it is not already open (tap / Settings / Connections /Connections).2. Below My ISP, tap Manage existing connections.3. Tap and hold the connection you want to use and then select Connect.4. Unless the service provider already confirmed that you must enter the user name, password, and domain settings, to access the Internet, tap OK on the left softkey without entering any information on this screen. Otherwise, enter the required information and then tap OK on the left softkey.5. The Connectivity icon in the title bar appears as the connection is being made. After the connection is made, you are returned to the My ISP screen. Tap OK in the top right corner of the screen to close the My ISP screen.
Juno Series User Guide 79Getting Connected 66. Tap OK in the top right corner to close the Connections screen.7. Tap in the top right corner to close the Settings screen.To check the connection status at any time, tap the Connectivity icon in the title bar.To end the connection at any time, tap the Connectivity icon in the title bar and then tap Disconnect.The Modem Status Indicator in the Today screen indicates the signal strength and connectivity status within the cellular network. For more information, see page 37.To connect to a corporate network or Intranet, see page 94.To send and receive e-mail messages, see Messaging, page 48.Connecting to a Bluetooth-enabled device To use another Bluetooth-enabled device with the Juno series handheld, you must form a Bluetooth connection between the two devices, during which you select the type of service to use for the connection. This defines how the devices will communicate with each other.After forming the Bluetooth connection between the devices you may need to configure settings for the connection such as the COM port for the field software to use, or the number for the phone to dial. You must then connect to the other device using the appropriate software application.To connect the Juno series handheld to another Bluetooth-enabled device, you can use either a paired connection or a non-paired connection.Note – If you are connecting to a phone, skip this section and go to Connecting to a Bluetooth-enabled phone for Internet access on page 82, where the pairing step is described as part of the procedure for connecting to a phone.Trimble recommends using a paired connection, if pairing is supported by the other device, as a paired connection creates a more secure connection and makes reconnecting to the device easier. For more information, see Pairing with a Bluetooth-enabled device below.Some devices do not support paired connections. Use a non-paired connection if the device does not have a keyboard, and if you know that the device does not automatically exchange a pre-programmed passkey during pairing. For more information, see Setting up a connection to a non-paired device, page 81.To connect the Juno series handheld to the other device, do one of the following:•Pair with a Bluetooth-enabled device (see below)•Set up a connection to a non-paired device (see page 81)
6 Getting Connected80 Juno Series User GuidePairing with a Bluetooth-enabled devicePairing the handheld with another Bluetooth-enabled device creates a permanent security bond between the devices, which helps to exchange information securely between the devices. The paired relationship is established when two devices create and exchange a link key. Once the relationship is established, the handheld and the other Bluetooth device only need to have their Bluetooth radios turned on to exchange information; they do not need to be visible to other devices.To pair with a Bluetooth device:1. Make sure that the handheld and the Bluetooth device you want to pair with are within five meters of each other, and that the Bluetooth radio in each device is turned on.2. On theJuno series handheld, tap / Settings / Connections / Bluetooth.3. In the Devices tab, tap Add new device. The handheld searches for other Bluetooth devices and displays them in the list.If the device you are trying to connect is not displayed in the list, ensure that the device is on and within range and then tap Refresh to search for devices again. 4. Tap the name of the device you want to pair with and then tap Next on the right softkey.5. In the Passcode field, enter a passcode of between 1 and 16 characters. If you are connecting to:–a device with a keypad, enter a passcode of your choice.–a device without a keypad, but you know that the device has a pre-programmed passcode that will be exchanged, enter that passcode on the Juno series handheld.Note – Trimble recommends that you enter only numbers, as some devices do not support passcodes that include letters.6. Tap Next on the right softkey.7. When prompted, enter the same passcode on the other device.On the handheld, the Partnership Settings screen appears.8. If required, change the name of the device in the Display Name field.9. Select the service(s) you want to use with this device. For example, if you are connecting to:–a Bluetooth-enabled phone to connect to the Internet, select Dialup Networking (DUN).–a serial device, such as a laser rangefinder, select Serial Port.
Juno Series User Guide 81Getting Connected 6–a computer to access ActiveSync technology, select ActiveSync.Note – For more information on the types of devices that the Juno series handheld can connect to, and the supported Bluetooth services, see Connecting to a Bluetooth device as a client, page 95.10. Tap Finish on the right softkey.11. Tap OK in the top right corner of the screen to close the Bluetooth application.12. Tap in the top right corner to close the Settings screen.You have now created a partnership between theJuno series handheld and the other Bluetooth-enabled device so that they can communicate. To start using the connection, you must complete the configuration steps for that type of connection and then connect to the device. For more information, see: •Connecting to a Bluetooth-enabled phone for Internet access, page 82•Connecting to a Bluetooth-enabled serial device, page 87•Connecting to an office computer to use ActiveSync technology, page 89BTip – You only need to pair the handheld with a device before you connect to the device for the first time. Setting up a connection to a non-paired deviceSetting up a connection to a non-paired device enables you to connect to a device that does not allow you to enter a passcode on the device, or that does not automatically exchange a pre-programmed passkey during pairing.To set up a non-paired connection to a Bluetooth-enabled device:1. Make sure that the handheld and the Bluetooth device you want to connect to are within five meters of each other, and that the Bluetooth radio in each device is turned on.2. Tap / Settings / Connections /Bluetooth.3. In the Devices tab, tap Add new device. The handheld searches for other Bluetooth devices and displays them in the list.4. Tap the name of the device you want to connect to and then tap Next on the right softkey. The Enter Passcode screen appears.5. Tap Next without entering a passcode. 6. If prompted to add the device to your device list, tap No. The Partnership Settings screen appears.7. If required, change the name of the device in the Display Name field.
6 Getting Connected82 Juno Series User Guide8. Select the service(s) you want to use with this device. For example, if you are connecting to:–a Bluetooth-enabled phone to connect to the Internet, select Dialup Networking (DUN).–a serial device, such as a laser rangefinder, select Serial Port.–a computer to access ActiveSync, select ActiveSync.Note – For more information on the types of devices that the Juno series handheld can connect to, and the supported Bluetooth services, see Connecting to a Bluetooth device as a client, page 95.9. Tap Finish on the right softkey.10. Tap OK in the top right corner of the screen to close the Bluetooth application.11. Tap in the top right corner to close the Settings screen.You have now created a partnership between theJuno series handheld and the other Bluetooth-enabled device so that they can communicate. To start using the connection, you must complete the configuration steps for that type of connection and then connect to the device. For more information, see: •Connecting to a Bluetooth-enabled phone for Internet access or real-time corrections (including VRS networks), page 89•Connecting to a Bluetooth-enabled serial device, page 87•Connecting to an office computer to use ActiveSync technology, page 89 Connecting to a Bluetooth-enabled phone for Internet access If your model of Juno series handheld does not contain an integrated cellular modem, you can use the handheld’s Bluetooth radio to connect to a Bluetooth-enabled cellular phone and then connect to the Internet. Use this type of connection to access a background map server, or for Internet and e-mail access.Note – Some cellular phones support the Bluetooth PAN (Personal Area Networking) service as well as the Bluetooth DUN (Dialup Networking) service. Because DUN connections are more common, this section assumes you are making a dialup network connection with the Bluetooth-enabled phone.To connect to a Bluetooth-enabled phone using a Bluetooth DUN (Dialup Networking) connection, you must:1. Connect the Juno series handheld to a Bluetooth-enabled phone and then configure the connection to the dialup network.2. Connect to the Internet using the dialup network.3. Configure the software to use the connection. For example, you must configure the GPS field software to use map data received from the Internet source, or you must set up the Messaging application to send and receive e-mail using the connection.
Juno Series User Guide 83Getting Connected 6Note – Before you begin the steps below, Trimble recommends that you confirm that the phone can access the Internet directly. If necessary, contact the cellular phone provider and confirm whether you must enter a user name, password, and domain details when connecting an external device to the phone using Bluetooth dialup networking.Step 1: Connecting the handheld to the phone and configuring the connection to the dialup network1. Make sure that the handheld and the Bluetooth device you want to connect to are within five meters of each other, and that the Bluetooth radio in each device is turned on. For more information, see Turning on and turning off the integrated radios, page 70.2. On the handheld, tap / Settings / Connections /Connections.3. Below My ISP, tap Add a new modem connection. 4. Enter the name for the connection. 5. From the Select a Modem dropdown list, select Bluetooth and then tap Next on the right softkey.6. If the phone you want to connect to is:–listed, go to Step 7 below. –not listed:a. Tap Add new device. The handheld searches for other Bluetooth devices and displays them in the list.If the handheld’s integrated Bluetooth radio is turned off, it is now automatically turned on.b. From the list of available devices, select the device you want to connect to and then tap Next on the right softkey.c. To pair with the phone, enter a passcode of your choice that you will easily remember onto the handheld and then tap Next on the right softkey.d. When prompted by the phone, enter the same password and then accept the connection.e. On theJuno seriess handheld, in the Partnership Settings screen, make sure that Dialup Networking (DUN) is selected and then tap Finish on the right softkey.You have now created a partnership between the Juno series handheld and the phone so that they can communicate.7. From the My Connections list, select the phone that you want to configure the connection to.
6 Getting Connected84 Juno Series User Guide8. Enter the GPRS access number for the Internet. Two of the common GPRS access numbers for cellular phones on GSM networks are *99***1# and *99#. If these access numbers do not work, contact the cellular phone provider to obtain the appropriate number to use.Note – You do not need to set up dialling rules or change the Internet connection settings on the phone. The connection settings you enter on the handheld are passed to the phone to use for this connection.9. Tap Next on the right softkey. 10. Unless the phone provider confirmed that you must enter user name, password, and domain settings to access the Internet, tap Finish on the right softkey without entering any information in this screen. Otherwise:a. Enter the required information. b. If the phone provider has told you that you need to change the baud rate or other settings for the connection, tap Advanced, configure these settings and then tap OK in the top right corner of the screen.c. Tap Finish on the right softkey.You are returned to the Connections screen.You have now configured the dialup networking connection.Step 2: Connecting to the Internet using the dialup network1. On the handheld, go to the Connections screen, if it is not already open (tap / Settings / Connections /Connections).2. Below My ISP, tap Manage existing connections. 3. Tap and hold the connection you want to use and then select Connect. 4. Unless the phone provider confirmed that you must enter user name, password, and domain settings to access the Internet, tap OK on the left softkey without entering any information in this screen. Otherwise, enter the required information and then tap OK on the left softkey.5. If the phone prompts for confirmation to connect to the Internet, accept the connection.The phone dials the configured GPRS access number and then connects to the Internet. A Connectivity notification appears on the handheld as the connection is being made.After the connection is made you are returned to the My ISP screen.
Juno Series User Guide 85Getting Connected 6To confirm that the Juno series handheld is connected to the phone, or to check the status of the connection at any time, tap the Connectivity icon in the title bar. The notification shows the name of the current connection, and the time elapsed since the connection was made. To hide the notification, tap Hide.Note – If you have an active wireless LAN connection, the connectivity icon appears as instead. 6. Tap OK in the top right corner of the screen to close the My ISP screen.7. Tap OK in the top right corner to close the Connections screen.8. Tap in the top right corner to close the Settings screen.To check the connection status at any time, tap the or icon in the title bar.To end the connection at any time, tap the or icon in the title bar and then tap Disconnect.To connect to a corporate network or Intranet, see page 93.To send and receive e-mail messages, see Messaging, page 48.Step 3: Configuring the GPS field software to use data received from the Internet sourceNow that you have connected the Juno series handheld to the Internet using a Bluetooth-enabled cellular phone, you must configure the software to use the connection to receive data.Downloading background map files from an Internet map server1. Make sure that the coordinate system selected in the TerraSync software matches the coordinate system of the map server.2. In the Map section of the TerraSync software, pan or zoom to make sure that the area for which you want a background image is displayed on the map. If the map server covers the area you are in, it will provide a background image that matches the current map extents.3. Tap Layers and then select Background files. The Background Files form appears. 4. In the Location field select Internet and then use the fields that appear to specify the Map Server type, the URL of the server, the service, and the layers from that service that you want to download. 5. Tap OK to close the Background File form and download the selected background map.
6 Getting Connected86 Juno Series User GuideThis may take some time. When a download is in progress, an icon appears in the top left corner of the map. Once the background file is downloaded, the hourglass icon appears until the downloaded image is rendered and becomes visible.If you pan or zoom beyond the extents of the downloaded image, new images are downloaded automatically and displayed in the background of the map. To stop automatic downloading of background files, either clear the address of the map server from the URL field, or set the Location field to Default and then clear the check box next to any files.Reconnecting to the InternetTo reconnect to the Internet at any time after setting up the connection, repeat the steps listed under Step 2: Connecting to the Internet using the dialup network on page 84.
Juno Series User Guide 87Getting Connected 6Connecting to a Bluetooth-enabled serial deviceUse Bluetooth wireless technology to receive data from a Bluetooth-enabled serial device, such as a laser rangefinder.To connect to a Bluetooth-enabled serial device, you must:1. Connect to the Bluetooth-enabled serial device.2. Configure the COM port on the handheld to use for the connection.3. If necessary, configure the GPS field software to use data received from the serial device.Step 1: Connecting to the Bluetooth-enabled serial deviceConnect the handheld to the Bluetooth-enabled device, selecting the Serial Port service if it is not already selected (see Connecting to a Bluetooth-enabled device, page 79).Step 2: Configuring the COM port to use on the handheld1. On the Juno series handheld, tap / Settings / Connections /Bluetooth.2. Tap the COM Ports tab. 3. Tap New Outgoing Port. 4. Select the device you want to set up the connection to and then tap Next on the right softkey.5. Select the COM port on the Juno series handheld to use for the connection.The Juno series handheld has four COM ports (COM6, COM7, COM8 and COM9) available for connections out to Bluetooth-enabled serial devices.6. Do one of the following:–To communicate with any device, for example if you have formed this connection without pairing to a device, clear the Secure Connection check box.–To communicate only with devices with which the handheld has a Bluetooth partnership, select the Secure Connection check box.7. Tap Finish on the right softkey.8. Tap OK in the top right corner to close the Bluetooth application.9. Tap in the top right corner to close the Settings screen.
6 Getting Connected88 Juno Series User GuideStep 3: Configuring the GPS field software to use data from the serial deviceOnce you configure the connection between the Juno series handheld and the Bluetooth-enabled serial device, you must configure the software to use the connection to receive data.To use a Bluetooth-enabled external sensor such as a laser rangefinder or a barcode scanner in TerraSync software, see below.Using data from an external source in the TerraSync software To configure the TerraSync software to use data from an external source, for example, a laser rangefinder or barcode scanner:1. Start the TerraSync software and then open a data file.2. In the Setup section, tap External Sensors. The External Sensors form appears. 3. If you are connecting to:–a laser rangefinder, select the Laser check box and then tap the Properties button beside the Laser check box. The Laser Properties form appears.–a barcode scanner or other external sensor, select the Sensor 1 or Sensor 2 check box and then tap the Properties button beside the appropriate check box. The Sensor Properties form appears.4. If you are connecting to a barcode scanner or other external sensor, enter a name for the connection in the Name field.5. From the Port drop-down list, select the name of the COM port that you selected in the Bluetooth application when you set up the connection to the device.6. Tap OK to confirm the sensor settings and return to the External Sensors form.7. Tap OK to confirm the settings and return to the main screen of the Setup section.8. The external sensor is now setup for use and can be used to add data as attributes into an open file in TerraSync. The device is automatically connected and disconnected when data files in TerraSync are opened and closed.To check the status of the connection, select the Comms subsection in the Status section of the GPS field software.
Juno Series User Guide 89Getting Connected 6Connecting to an office computer to use ActiveSync technology Instead of using a USB or serial cable to physically connect to an office computer, you can use Bluetooth wireless technology to connect to ActiveSync technology or the Windows Mobile Device Center on a Bluetooth-enabled office computer.Note – Not all Bluetooth devices and Bluetooth management software support ActiveSync connections. Check with the manufacturer of the office computer for compatibility. Note – The exact steps required may vary depending on the office computer.To connect to a office computer to use ActiveSync with a Bluetooth connection, you must:1. Set up the connection to the computer.2. Connect to ActiveSync using Bluetooth wireless technology.Step 1: Setting up the connection to the computer1. From the Bluetooth user interface on the office computer, make sure that the computer allows itself to be discovered by other Bluetooth devices.2. Configure the ActiveSync software on the office computer to connect to the correct Bluetooth port. The steps required depend on the operating system installed on the office computer. If the office computer is using:•the Windows Vista operating system:a. From the Start menu on the office computer, select Control Panel / Hardware and Sound / Windows Mobile Device Center.The Connection Settings dialog appears: b. Select the Allow connections to one of the following check box.c. From the list, select Bluetooth and then click OK.•the Windows XP or 2000 operating system:a. From the Bluetooth user interface on the office computer, identify the virtual COM port of the host Bluetooth Serial Port or Local Service and ensure that this is enabled. In this example, the virtual COM port is COM5.b. Start the ActiveSync software on the office computer.c. Select File / Connection Settings.
6 Getting Connected90 Juno Series User GuideThe Connection Settings dialog appears: d. Select the Allow connections to one of the following check box.e. From the list, select the COM port that you selected in Step a and then click OK.Note – Before you try to form a Bluetooth connection from the Juno series handheld to the office computer, you must correctly configure the Bluetooth host serial port and ActiveSync technology on the office computer.3. On the handheld, tap / Settings / Connections /Bluetooth.4. In the Devices tab, tap Add new device. The handheld searches for other Bluetooth devices and displays them in the list.5. Tap the name of the computer you want to connect to and then tap Next on the right softkey.6. When prompted, enter a passcode of your choice that you will easily remember on the handheld.7. Enter the same passcode on the office computer.8. On the handheld, select the ActiveSync check box in the list of services provided by the computer and then tap Finish on the right softkey.You have now created a partnership between the Juno series handheld and the office computer so that they can communicate.9. Tap OK in the top right corner to close the Bluetooth application.10. Tap in the top right corner to close the Settings screen.To connect to ActiveSync, see Step 2 on the following page.
Juno Series User Guide 91Getting Connected 6Step 2: Connecting to ActiveSync using Bluetooth wireless technology1. On the Juno series handheld, tap / Programs / ActiveSync.2. Tap Menu and then select Connect via Bluetooth.On the Juno series handheld, a message box shows the status of the connection as it is made.3. When the connection to the office computer is successful, you are returned to the ActiveSync application on the handheld.4. Tap to close.The connectivity icon in the status bar shows , or if WLAN is connected.To check the status of the ActiveSync connection, tap the connectivity icon in the title bar.To disconnect, tap / Programs / ActiveSync on the handheld and then select Menu / Disconnect.
6 Getting Connected92 Juno Series User GuideBeaming files to or from another deviceYou can beam files, contacts, tasks, and appointments between the handheld and another device.To receive beamed files from another device:1. Make sure that the Juno series handheld’s integrated Bluetooth radio is turned on (see page 73).2. Tap / Settings / Connections/ Beam.3. Select the Receive all incoming beams check box and then tap OK.4. When another device attempts to beam a file, you are prompted to accept the file. To receive the file, tap Ye s.Note – All incoming files are automatically saved in the My Documents folder on the handheld.To send beamed files to another device:1. Make sure that the Juno series handheld’s integrated Bluetooth radio is turned on (see page 73).2. On the Juno series handheld, open File Explorer and go to the file you want to send.3. Tap and hold the file and then select Beam File. The handheld scans for nearby devices.4. Tap the device you want to send the file to. The file is sent to the device.A message reports Done or Failed, depending on the outcome of the file transfer.
Juno Series User Guide 93Getting Connected 6Accessing a corporate network through your Internet connectionUse a Virtual Private Network (VPN) connection to access a corporate network or Intranet. Before you begin, obtain the following information from your network administrator:•user name and password•domain name•host name or IP address of the VPN serverTo access a corporate network through your Internet connection, you must:1. Set up an Internet connection on the handheld.2. Set up a VPN connection.3. Connect to the corporate network or Intranet.Step 1: Setting up an Internet connection on the handheldDo one of the following:•Set up a wireless LAN connection to an access point. For more information, see page 76.•Connect to the Internet using the internal cellular modem (Juno SC version only). For more information, see page 77.•Connect to the Internet using a Bluetooth-enabled phone. For more information, see page 82.Step 2: Setting up a VPN connection1. On the Juno series handheld, tap / Settings / Connections / Connections. 2. From the My Work Network list, tap Add a new VPN server connection.3. Follow the instructions in the Make New Connection wizard.To view additional information for any screen in the wizard, tap .4. Tap Finish.
6 Getting Connected94 Juno Series User GuideStep 3: Connecting to the corporate network or IntranetTo connect to the corporate network or Intranet, simply start using Internet Explorer.The Windows Mobile operating system automatically controls whether the VPN connection is used, depending on whether the URL contains a period. For example, the URL www.trimble.com contains periods, and so the connection to this web site is made without using the VPN connection. However, an address to a network computer or file server that does not contain periods automatically starts the VPN connection.If you need to use the VPN connection to access URL addresses that contain periods, specify exceptions for the addresses that are within the corporate network. To do this:1. Tap / Settings / Connections / Connections. 2. Tap the Advanced tab.3. Tap Exceptions. The Work URL Exceptions screen appears. 4. Tap Add new URL.5. Enter the URL and then tap OK in the top right corner of the screen.6. Repeat Step 4 and Step 5 as required.7. Tap OK in the top right corner of the screen to return to the Advanced tab of the Connections screen.8. Tap OK in the top right corner of the screen to close the Connections screen.9. Tap to close the Settings screen.
Juno Series User Guide 95Getting Connected 6Bluetooth wireless connections explainedThe Juno series handheld has an integrated Bluetooth radio that you can use to establish a wireless connection to other Bluetooth devices that are within range. Using a Bluetooth connection, you can communicate with devices such as cellular phones, office computers, other handhelds, and Bluetooth-enabled laser rangefinders and barcode scanners. You can also communicate with peripheral devices that use Bluetooth adaptors instead of serial or USB connections.The Juno series handheld can act as a Bluetooth client device or a Bluetooth host device, and can act as both at the same time. The concepts of client and host devices are explained in detail below.Connecting to a Bluetooth device as a clientYou can use the Juno series handheld as client device, which uses services offered by Bluetooth host devices that are within range. In general the host device provides information to the client device, but in some cases the client initiates the connection and also provides information to the host device.The services used by a Juno series handheld when connecting as a Bluetooth client are:A client can connect to a number of different services provided by different hosts. The number of active connections at any one time affects the speed of the connections. Figure 6.1 shows the handheld connected to different types of host devices using Bluetooth wireless technology. Service DescriptionDialup Networking (DUN)Connects the handheld to a cellular phone or modem for dial-up network or Internet access.Personal Area Networking (PAN) Connects to Bluetooth network access points or phones that support the Personal Area Network/Network Access (PAN) profile.Serial Port Emulates an RS-232 serial (COM) port on the handheld.ActiveSync Enables an ActiveSync connection to a computer. Input Device (HID) Connects the handheld to a physical input device, such as a keyboard.Wireless Stereo Connects to Bluetooth A2DP (Advanced Audio Distribution Profile) headphones.
6 Getting Connected96 Juno Series User Guide Figure 6.1 Juno series handheld Bluetooth client connectionsIn Figure 6.1, the dashed arrows indicate the client device—that is, the Juno series handheld—connecting to host devices. The Bluetooth profile (or service) used for the connection is shown between the arrows, for example, the DUN service is used for a connection to a cell phone, and the Serial Port service is used for a serial connection to a barcode scanner or laser rangefinder. The solid arrows indicate the flow of information between devices. For example, when the Juno series handheld connects as a client to:•a cellphone, the handheld uses the DUN or PAN host service provided by the phone to access the Internet and background map data.•a laptop computer or office computer, the devices use the ActiveSync service to exchange information to and from either device. •Bluetooth headphones, the handheld uses the Wireless Stereo host service provided by the headphones to play audio files and system sounds.
Juno Series User Guide 97Getting Connected 6Providing Bluetooth services as a hostYou can use the Juno series handheld as a Bluetooth host device, which provides services to Bluetooth client devices that are within range.Host services provided by the Juno series handheld are:To provide a host service, you must turn on the Bluetooth radio and make both devices visible to other devices (see page 70 and page 74).When a client device connects to the Serial Port service provided by the Juno series handheld, applications on the handheld can use the pre-defined host serial port on COM5 to provide host services to the client device. Service DescriptionSerial Port Emulates an RS-232 serial (COM) port on the handheld.
6 Getting Connected98 Juno Series User Guide
CHAPTER7Juno Series User Guide 99Troubleshooting 7In this chapter:Power issuesBacklight issuesTouch screen issuesKeypad issuesMemory card issuesConnection issuesGPS receiver issuesReal-time DGPS issuesUse this section to identify and solve common problems that may occur when using the Juno series handheld. Please read this section before you contact technical support.
7 Troubleshooting100 Juno Series User GuidePower issues Backlight issues Problem Cause SolutionThe handheld does not turn on.The battery is flat. Recharge the battery (see page 25).The screen is blank. The handheld is turned off.Press the Power button to turn on the handheld.The handheld has locked up.Reset the handheld (see Resetting the handheld, page 30).The handheld is not charging.The internal temperature has risen above the allowed maximum for charging the battery.Do one or all of the following:• Turn off the integrated radios before charging the handheld.• Suspend the handheld before charging.• Remove the handheld from any external heat sources (for example, sunlight). The handheld will automatically start charging again when the internal temperature has dropped below the range for charging the battery.The USB cable provides only a minimal charge when an active connection to the computer is formed.Recharge the battery using the AC adaptor or the vehicle adaptor.The battery power percentage bar does not appear in the Power control.The battery has 0% power.Recharge the battery (see page 25). Once the battery level is above 0%, the battery power percentage bar reappears. Tap / Settings / System / Power / Battery to view the level of power remaining in the battery.The charge level of the battery drops when the handheld is turned off.The handheld was left in Suspend mode or was left fully charged for a long duration.Before storing the handheld, completely shut down the handheld (see Turning on and turning off the handheld, page 29). Then store the handheld as recommended (see Storage, page 18).Problem Cause SolutionThe backlight does not come on when you tap the screen or press a button.The backlight is not set to turn on in the Backlight control.Tap / Settings / System / Backlight to view the Backlight control, and make sure that:•the Turn on backlight when a button is pressed or the screen is tapped check box is selected.• the brightness is not set to Dark in the Configure tab.The screen is blank or hard to see.The backlight is off. Tap the screen or press a button.The backlight level needs to be adjusted.Tap / Settings / System / Backlight to view the Backlight control and then adjust the slider in the Configure tab.
Juno Series User Guide 101Troubleshooting 7Touch screen issues Keypad issues Memory card issues Problem Cause SolutionThe touch screen does not respond to stylus taps.The touch screen is incorrectly aligned.Realign the screen (see page 46).The touch screen is locked. To unlock the touch screen, tap Unlock in the menu bar of the Today screen.The handheld has locked up.Reset the handheld (see Resetting the handheld, page 30).The screen is blank. The handheld is turned off.Press the Power button to turn on the handheld.The battery is flat. Recharge the battery (see page 26).The handheld has locked up.Reset the handheld (see Resetting the handheld, page 30).The screen is hard to see.The backlight level needs to be adjusted.Open the Backlight control and then adjust the backlight level (see Backlight, page 47).The backlight is off. Tap the screen to turn on the backlight.You are unable to see parts of an application windows when the screen is in landscape orientation.Some applications are designed for portrait orientation only. To view the entire application window, change the screen display to portrait.The selected display theme does not have enough contrast.Select the High-Contrast display theme. Tap / Settings / Personal / Today, select the High-Contrast theme and then tap OK.Problem Cause SolutionPressing the application key does not activate the function shown on the softkey above it.The hardware application key has been programmed to run another program or to perform another action.Do one of the following:• Tap the touchscreen softkey to activate the function shown on the softkey.• Re-program the application key to perform the same action as the touchscreen softkey. To do this, tap / Settings / Personal / Buttons, select the button to reprogram and then select <Left Softkey> or <Right Softkey>.Problem Cause SolutionThe handheld does not recognize a memory card.The handheld does not support SDIO (SD input/output) cards.Use a microSD or microSDHC memory card.Files on the memory card are not visible or are not able to be opened.Files have been encrypted on another device and have a .menc file extension.Remove encryption from the files (see Encrypting files on memory cards, page 33).
7 Troubleshooting102 Juno Series User GuideConnection issuesActiveSync technology Problem Cause SolutionActiveSync technology will not connect to the handheld.The connection is not initiated automatically.Disconnect the USB cable from the computer and then reconnect the handheld to the computer. Alternatively, in the ActiveSync software on the office computer, select File /Connection Settings and then tap Connect.ActiveSync does not recognize the Juno series handheld.Restart the office computer.Disconnect the USB cable from the handheld, reset it (see Resetting the handheld, page 30) and then reconnect the handheld to the computer.An incompatible version of ActiveSync software is installed.ActiveSync version 4.5 and later is compatible with the Juno series handheld. If version 4.5 or later of the ActiveSync software is not installed on the office computer, you can install it from the Juno Series Getting Started Disc.You can also download the latest version from the Microsoft website at www.microsoft.com/windowsmobile/activesync/default.mspx.The connection is not enabled in ActiveSync on the computer.In the ActiveSync software on the office computer, click File /Connection Settings. If you are using:• the support module, make sure that the Allow USB connections check box is selected from the drop-down list.• a Bluetooth connection, make sure that the correct port for Bluetooth is selected. Then open the Bluetooth control on the handheld. In the Devices tab, tap the partnership and in the services list make sure that the ActiveSync check box is selected.The connection is not enabled in ActiveSync on the handheld.On the handheld, tap / Programs / ActiveSync / Menu / Connections. Make sure that the Synchronize all PCs using this connection check box is selected, and that the correct option is selected.The handheld connection settings conflict with network settings or VPN client software.If you are using the USB data cable, use the USB to PC utility to change the connection method the handheld uses to connect to ActiveSync on the computer. Tap / Settings / Connections / USB to PC Utility. Clear the Enable advanced network functionality check box.The handheld stops using the default RNDIS method to connect to the ActiveSync software.
Juno Series User Guide 103Troubleshooting 7Windows Mobile Device Center Network connections Problem Cause SolutionWindows Mobile Device Center will not connect to the handheld.The connection is not initiated automatically.Disconnect the USB cable from the computer and then reconnect the handheld to the computer.. Alternatively, in the Windows Mobile Device Center software on the office computer, select Mobile Device Settings /Connection Settings.The Windows Mobile Device Center software does not recognize the Juno series handheld.Restart the office computer. Disconnect the USB cable from the handheld, reset it (see Resetting the handheld, page 30) and then reconnect the cable to the handheld.The connection is not enabled in Windows Mobile Device Center on the computer.In the Windows Mobile Device Center software on the office computer, click Mobile Device Settings / Connection Settings. If you are using:• the USB data cable, make sure that the Allow USB connection check box is selected from the drop-down list.• a Bluetooth connection, make sure that the correct port for Bluetooth is selected. Then open the Bluetooth control on the handheld. In the Devices tab, tap the partnership and in the services list make sure that the ActiveSync check box is selected.The connection is not enabled on the handheld.On the handheld, tap / Programs / ActiveSync / Menu / Connections. Make sure that the Synchronize all PCs using this connection check box is selected, and that the correct option is selected.The handheld connection settings conflict with network settings or VPN client software.If you are using the USB data cable, use the USB to PC utility to change the connection method the handheld uses to connect to the Windows Mobile Device Center on the computer. Tap / Settings / Connections / USB to PC Utility. Clear the Enable advanced network functionality check box.The handheld stops using the default RNDIS method to connect to the Windows Mobile Device Center.Problem Cause SolutionThe bluetooth connection with the cellular phone suddenly ends.If you change the proxy settings of the handheld while connected to a cellular phone, the cellular phone ends the connection.Make any changes to proxy settings before connecting to a mobile device.Unable to connect to another Juno series handheld.Data encryption settings are set incorrectly.When setting up a peer-to-peer ad-hoc network with a WEP encryption, set a Network Key, rather than leaving the key blank to be provided automatically.
7 Troubleshooting104 Juno Series User GuideBluetooth wireless technology Problem Cause SolutionThe handheld cannot discover a nearby Bluetooth device.The device is out of range.Move the devices closer to each other and then scan again.Bluetooth wireless technology is not enabled on one or both devices.Make sure that the Bluetooth radio is turned on, on both the handheld (see page 73) and the other Bluetooth device.The device has not been made Discoverable.Make sure that the Bluetooth device has been made Discoverable. The COM port that you assigned to a serial port service is not available in your application.The application cannot recognize ports if they are added after the application opens.Exit from the application, add the port and then run the application again.The Bluetooth connection fails while in use.The Bluetooth device has moved out of range.Move the devices closer to each other. The devices should reconnect automatically. If they do not, select the Bluetooth device in the Devices tab. Tap and hold the device name and then select Delete. Tap New to discover the device again.The Bluetooth radio has lost the connection.Turn off the Bluetooth radio on the handheld and then turn on the Bluetooth radio (see page 73).Bluetooth file transfer interrupts the connection.When you transfer large image or data files, other Bluetooth connections may stop responding. To avoid problems, close other Bluetooth connections before transferring large files.
Juno Series User Guide 105Troubleshooting 7Wireless LAN connections Problem Cause SolutionThe “New Network Detected” notification does not appear automatically.The wireless LAN radio is off.Tap the wireless icon in the Today screen or go to the Wireless Manager and make sure wireless LAN is on.The handheld is out of range of the network.Move to within range of the network, then tap / Settings /Connections /Network Cards and then setup the connection.The handheld cannot connect to a secure site.The date on the handheld is incorrect.Check that the handheld has the date set correctly on the Today screen. If the date is incorrect, tap the clock icon on the Today screen and then adjust the date and time.You cannot configure an Internet connection.Within range of more than one network, you are not connecting to the network you would prefer to use.The radio is connecting to the first network signal it has received.Tap / Settings /Connections /Network Cards. Tap and hold the network you would prefer to use and then select Connect. The “New Network Detected” notification appears but the menu bar and soft key options are not displayed.Some applications are not fully compatible with all features of the Windows Mobile 6 operating system.Use the application buttons on the keypad, as they map to the soft keys in the menu bar:• To dismiss the notification, press the right application button on the keypad. • To connect to the network, press the left application button. Alternatively, select a Windows Mobile application from the Start menu, such as the Today screen or File Explorer, and the menu bar and soft keys will be displayed correctly.
7 Troubleshooting106 Juno Series User GuideGPS receiver issues Problem Cause SolutionThe handheld is not receiving GPS positions.The integrated GPS receiver is not activated.Use the Connect or Activate GPS command in the GPS field software to open the GPS COM port and activate the integrated GPS receiver. For more information, see Using the GPS receiver, page 59.The GPS COM port is already in use. Only one application at a time can have the port open. Do the following:• Exit the software that is using the GPS COM port and then retry in your application.• Check that a GPS application is not running in the background. Tap / Settings / Memory, select Running Programs, and then select and close any GPS applications you are not using..The GPS field software is using the wrong GPS COM port.Connect to COM4.Not enough satellites are visible.Move to a location where the receiver has a clear view of the sky and ensure the antenna is not obstructed.Wait for real-time is selected in the GPS field software and the integrated receiver is waiting to receive real-time corrections.If you are collecting data for postprocessing, clear the wait for real-time selection.Check that the real-time correction source is setup correctly (see Connecting to a real-time differential correction source, page 64).NMEA data includes autonomous positions.The integrated GPS receiver outputs autonomous positions when real-time corrections are unavailable.Configure the NMEA application to filter out non-DGPS positions.
Juno Series User Guide 107Troubleshooting 7Real-time DGPS issues Problem Cause SolutionThe handheld is not receiving SBAS real-time correctionsThe SBAS satellite is obstructed from view.Check the location of the SBAS satellite in the Skyplot section of the GPS field software, and if possible move to a different location.You are outside the WAAS, EGNOS, or MSAS coverage area.Wide Area Augmentation System (WAAS) satellites are tracked in the Continental United States including Alaska, and in southern parts of Canada.European Geostationary Navigation Overlay Service (EGNOS) satellites are tracked in Europe. MTSAT Satellite-based Augmentation System (MSAS) satellites are tracked in Japan.
7 Troubleshooting108 Juno Series User Guide
Juno Series User Guide 1Symbols.menc files 33AAC power adaptorconnecting 27included component 17safety 8access point 75accessing DGPS corrections from the Internet 77, 82accessing online help 36accessories 17accuracyimproving 62–65, 65–66Accuracy Settings form 63accuracy-based logging 63ActiveSyncconnecting to the handheld 55installing onto a computer 53pre-installed software 38synchronizing 55troubleshooting 102, 103USB support module connection 53ActiveSync service 89–91, 95adjusting screen display 39Adobe Reader software 38alarms 44animated skyplot 65antennaexternal 17appointments 38ArcPad softwareconnecting to GPS 61installing 60supported versions 60Australia, notices to users 5Bbacking up data 51backlightreducing brightness to save power 28settings 47troubleshooting 100turning off to save power 47barcode scanner 88, 96base stations 65baseball cap with antenna sleeve 17batterycharging 25, 27conserving 28included component 17inserting 26low battery indicators 28power level 28recycling 6removing 26safety 9troubleshooting 106, 107beaming files 92Bluetooth client services 95Bluetooth radioconserving power 28safety 7Bluetooth wireless technologyActiveSync service 89–91, 95cellular phone connection 82–??client device 95client services 95computer connection 89–91connecting without pairing 81–82Dialup Networking (DUN) service 77, 82, 95, 96host device 95, 97host services on the handheld 97Input Device (HID) service 95Internet connection 82–85pairing with a device 80–81Personal Area Networking (PAN) service 77, 82, 95, 96Serial Port service 87, 95, 96, 97troubleshooting 104Wireless Stereo service 95, 96bonding with a device See pairing with a devicebrowsing the Internet 38buttons, customizing 43CCalculator software 38Calendar software 38Index
Index2 Juno Series User Guidecarry case 17cautionsaccidentally synchronizing data 52deleting files from the flash disk 32resetting to factory default settings 31characters, entering special 41checking battery power level 28cleaning the handheld 18ClearType font smoothing 46client device 95client services 95clock icon 44comments 19communicating with a desktop computer 51computer, connecting toBluetooth wireless connection 53, 89using USB support module connection 53configuringGPS field software 61mail service 49NMEA data output 66connecting toa barcode scanner 88a Bluetooth-enabled cellular phone 82–??a Bluetooth-enabled device 79–82a computer 53–56, 89–91a laser rangefinder 88a VRS network 82–??an Internet server 82–??Bluetooth network access points 95Bluetooth-enabled headphones 95corporate network 93e-mail server 49GPS receiver 61Intranet 93laser rangefinder 96Connection Manager Utility 55, 56connectorsexternal GPS antenna 18conserving power 28Contacts software 38context-sensitive help 36corporate network, connecting to 93customizingapplication keys 42notifications 45softkeys 42sounds 45Today screen 43Ddata collection, planning 62, 65data loggingaccuracy-based 63decrypting files 33deletingalmanac 62e-mail messages 48, 49files 32wireless LAN connection 77desktop computer, connecting to 54, 55device lock 24DGPS correctionsreceiving from an SBAS 64Dialup Networking service 95disabling encryption 33displaying the input panel 40documentation feedback 19DOP graph 65DUN service 95, 96EEGNOS satellites 64, 107electrostatic discharge 10, 18e-mail See Messagingenabling encryption 33encrypted files 33enteringinformation onto the handheld 40special characters 41text 40Europe, notices to users 5Excel Mobile software 38external antenna 17external antenna port 18external power kit 17Ffactory default settings, resetting to 31feedback 19File Explorer software 38file viewers 38flashing LEDred 27
Juno Series User Guide 3IndexGGeoBeacon receiver 17, 96GPSabout 59field software 60, 61satellite signals 59, 62troubleshooting 106GPS Controller softwareconnecting to GPS 61mission planning 65GPS field softwareconfiguring 61supported 16, 60GPS Pathfinder Office software 55, 56GPS Pathfinder Tools SDK 16, 61GPS receiverresetting 62green LED 27ground plane 17Hhandheld 29handwriting recognition 40hard reset 30Help 36, 38HID service 95hiding the keyboard 41host device 97host services 97hotspot See access pointIidle time 29IMAP4 mail service 49Inbox See Messaging 48Input Device service 95input panels 40installingActiveSync 53GPS field software 60software 54, 56, 57Windows Mobile Device Center 52integrated GPS receiver 59international adaptor kit 17Internet Explorer software 38Intranet, connecting to 93JJuno series handheldautomatic power off 29caring for 18companion CD 17copying files to 52included components 17integrated SBAS receiver 64locking and unlocking 44microphone 42parts 22resetting 30storing 18stylus 39Kkeyboard (on-screen) 40keypad 24keys, larger on the screen 41Llaser rangefinder 88, 96LED indicator 27Letter Recognizer 40, 41lock the screen 24locking the handheld 44low battery indicators 28Mmail service, setting up 49maintenance 18Make New Connection wizard 93managing files 38meetings, arranging 38memorybacking up data 32, 51program memory 31storage memory 31memory cardelectrostatic discharge 10encrypted files 33inserting 32, 34installing software to 57removing 32troubleshooting 101warnings 9, 32
Index4 Juno Series User Guidemenu bar 36messagesProblem with Bluetooth hardware 73Messaging software 38, 49Messenger software 38microphone 42Microsoft Exchange software 48Microsoft Outlook software 48Microsoft Transcriber software 41mission planning 65modesFlight 7MP3 files 38MSAS satellites 64, 107Nnavigation using GPS data 63network, connecting to a 93New Zealand, notices to users 5NMEAcompatible GPS field software 61connecting applications to GPS 61NMEA messages 67Notes software 38notices to usersAustralia and New Zealand 5Europe 5notifications, customizing 45null modem cable 17OOffice Mobile software 38online help, accessing 36optional accessories 17orientation of screen 46outputting NMEA data 66Ppairing with a device 80–81PAN service 95, 96password settings 44PC, connecting to 51Personal Area Networking service 95Pictures and Videos software 38planning GPS data collection 62, 65playing a recording 42POP3 mail service 49postprocessing 63, 66pouch 17powerautomatic power off 29charging battery 25, 27conserving 47troubleshooting 106, 107PowerPoint Mobile software 38preferences 35pre-installed software 38Problem with Bluetooth hardware message 73Program 31programs, pre-installed 38QQuick Start Guide 17Rradio use, safety 7range pole 17real-timedifferential correction 64–??, 65external correction source 87SBAS corrections 64troubleshooting 106receivingbeamed files 92e-mail messages 38, 48recording notes 41recycle bin 32red LED 27removing encryption from files 33required accuracy 63resettingGPS receiver 62the handheld 30restoring lost data 31SsafetyAC power adaptor 8battery 9memory card use 9radio use 7satellite geometry 65SBAS satellitestroubleshooting 107
Juno Series User Guide 5Indexusing 64screen protectors 17SD memory cards 32SDHC memory cards 32SDIO memory cards 32Search software 38searchingfor files on the handheld 38the Internet 38sendingbeamed files 92e-mail messages 38, 48error report 19instant messages 38serial clip 17Serial Portservice 95Serial Port service 87, 96, 97setting a password 44setting the time 44setting upVPN connection 93Skyplot 62skyplot 65SMTP mail service 49soft reset 30softwareActiveSync 38Adobe Reader 38Calculator 38Calendar 38Contacts 38Excel Mobile 38File Explorer 38Help 38installing 57Internet Explorer 38Messaging 38Messenger 38Notes 38Office Mobile 38Pictures and Videos 38PowerPoint Mobile 38pre-installed 38Search 38Tasks 38uninstalling 54, 56Windows Live 38Windows Media 38Word Mobile 38sounds, customizing 45special characters, entering 41spreadsheets, working with 38Start button 36Start menu 36status indicators 37Storage 31storage space 31storing the handheld 18streaming GPS positions 63stylus 39stylus kit 17support 19support moduleincluded component 17supported GPS field software 60Suspend mode 18switching keyboards 41synchronizinge-mail messages 48information 54, 55TTasks software 38technical support 19TerraSync data files, receiving by e-mail 49TerraSync softwareautomatically transferring data 55, 56connecting to GPS 61installing 60supported versions 60text editor 38text entry 40text size on screen 46time zone, setting 44title bar 36Today screen 36touch screenaligning 46care of 18orientation 46text size 46troubleshooting 101trackingappointments 38contacts 38tasks 38Transcriber software 41transferring files to a computer 54, 56Trimble GPScorrect extensionconnecting to GPS receiver 61installing 60
Index6 Juno Series User Guidesupported versions 60troubleshootingActiveSync 102, 103backlight 100battery 106, 107Bluetooth wireless technology 104GPS 106memory card 101power 106, 107real-time 106touch screen 101wireless LAN 103, 105Turn off device if not used for checkbox 29turning on and offhandheld 18, 29Uunlocking the handheld 44USB connection to a computer 53, 102, 103Vvehiclepower adaptor 17vehicle power adaptorconnector 27viewing files 38Virtual Private Network (VPN) 93WWAAS satellites 64, 107warningsAC adaptor 8, 25battery 9, 25memory card slot 10, 32, 34static electricity 10, 32, 34wi-fi See wireless LANWindows Error Reporting 19Windows Live Messenger 38Windows Live software 38Windows Media software 38Windows Mobilehelp 36parts of the screen 36themes 43Windows Mobile Device Centerconnecting to the handheld 54installing 52synchronizing 54wireless 28wireless LANtroubleshooting 103, 105wireless LAN radioconserving power 28safety 7Wireless Manager 71Wireless Stereo service 95, 96Word Mobile software 38World Wide Web 38write messages 38writing on the screen 40

Navigation menu