Trimble TK14RF RF Module User Manual

Trimble Inc. RF Module TI RF integration manual 01

a href="https://usermanual.wiki/Trimble" itemprop="url"> Trimble >

User Manual

    TI RF Module Integration Manual  This module will be built in only in Trimble products by Trimble itself. Trimble makes sure that the maximum voltage is 3.8V.                          The design is based on the CC2520 from Texas Instruments. •  P1: Vdd supply voltage 1.8 - 3.8V •  P2: GND •  P3: SO SPI Interface Serial Out •  P4: SI  SPI Interface Serial In •  P5: SPI_CLK SPI Interface  Serial clock 8MHz max •  P6: CS_N SPI Interface Chip select active low •  P7: External Reset pin active low •  P8: Vreg_EN when High, digital voltage regulator is active •  P9: GPIO0 general purpose digital I/O •  P10: GPIO1 general purpose digital I/O    Mounting instruction: The module could be mounted and connected with a plug connector or could be mounted on a plastic holder and connected with cable (P1-P10). Maximum Voltage: 3,8V Connect the SPI Port to a microcontroller and use the instruction of Texas Instruments to start running the module. Pad Function P1  Vdd P2  GND P3  SPI_IN P4  SPI_OUT P5  SPI_CLK P6  CS_N P7  Reset P8  Vreg_EN P9  GPIO0 P10  GPIO1
Download:
Mirror Download [FCC.gov]
Document ID2432324
Application IDcGfGhxrpXI9GSaHaryB9nA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6.94kB (86772 bits)
Date Submitted2014-10-31 00:00:00
Date Available2014-10-31 00:00:00
Creation Date2014-10-15 12:42:08
Producing SoftwareGPL Ghostscript 9.10
Document Lastmod2014-10-15 12:42:08
Document TitleTI RF_integration_manual_01
Document CreatorPDFCreator Version 1.7.3
Document Author: uohler
FCC ID Filing: PWR-TK14RF

Navigation menu