Trio Datacom EB450-XXF01 Remote Radio Data Modem Base/Repeater User Manual Trio Base Station EB450

Trio Datacom Pty Ltd (a wholly owned company of Schneider Electric) Remote Radio Data Modem Base/Repeater Trio Base Station EB450

Base Station EB

Local regulatory conditions may determine the performance and suitability of individual versions in different countries. It is the responsibility of the buyer to confirm these regulatory conditions. Performance data indicates typical values related to the RadioFrequency Range: 380-520 MHz (various sub-frequency bands available)Frequency Splits: Various Tx/Rx frequency splits - programmableChannel Selection: Dual synthesizer, 6.25 kHz channel stepChannel Spacing: 12.5 or 25 kHzFrequency Stability: ±1ppm (-30 to 60°C ambient, opt. -30 to 70°C) Higher frequency stability options are available (with external GPS reference)Aging: <= 1ppm/annumFull Duplex: Full duplex (optional internal or external duplexer available for single antenna operation)Configuration: All configuration via Windows based softwareTransmitterTx Power: 5W (+37 dBm) ±1 dBsoftware adjustable with over-temperature protection. 100% Duty Cycle.Modulation: Narrow band digital filtered binary GMSKOccupied Bandwidth: Designed to FCC, ETSI, ACA requirementsTx Keyup Time: < 1 mSecond Timeout Timer: Programmable 0-255 secondsTx Spurious: <= -37 dBmPTT Control: Auto (on Data) / RTS line (Port A or B) / System Port (Override)ReceiverSensitivity: -118 dBm for 12 dB SINADSelectivity: Better than 80 dBIntermodulation: Better than 75 dBSpurious Response: Better than 80 dBAFC Tracking: Digital receiver frequency trackingMute: Programmable digital muteDiagnostics (Optional)Network wide operation from any remote terminal.Non intrusive protocol - runs simultaneously with the application.Over-the-air re-configuration of user parameters.Programmable exception reporting of alarms. Storage of data error and channel occupancy statistics. In-built Error Rate testing capabilities.ConnectionsUser Data Ports: 2 x DB9 female ports wired as DCE (modem)System Port: RJ45 (front and rear) for diagnostics, configuration and programmingAntenna: 2 x N female bulkhead (separate Tx and Rx ports)1 x N female bulkhead (with optional internal duplexer)Power: 2 pin locking, mating connector suppliedLED Display: Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs (for both port A and B)ModemData Serial Port #1: RS232, DCE, 600-76,800 bps asynchronousData Serial Port #2: RS232, DCE, 300-38,400 bps asynchronousSystem Port: RS232, 19,200 bps asynchronousFlow Control: Selectable hardware/software/3 wire interfaceRF Channel Data Rate: 4800/9600/19,200 bps Full duplexData Buffer: 16 kbyte of on-board RAMBit Error Rate: < 1x10-6 @ -110 dBm (4800 bps)< 1x10-6 @ -108 dBm (9600 bps)< 1x10-6 @ -106 dBm (19,200 bps)Collision Avoidance: Trio DataCom’s unique supervisory channel C/DSMA collision avoidance systemMultistream™: Trio DataCom's unique simultaneous delivery of multiple data streams (protocols)Data Turnaround Time: <10mSFirmware: Field upgradeable FlashmemoryGeneralPower Supply: 13.8 Vdc nominal (11-16 Vdc)Transmit Current: 1.3 A nominal @ 1 W2.5 A nominal @ 5 WReceive Current: < 150 mADimensions: 19” 2 RU rack mount 485 x 90 x 390 mmWeight: 5 kg (excluding optional duplexer)Options DUPLX450Bx Internal / External Duplexers, Band Reject and Band PassEDOVM Digital Order Wire Voice ModuleTVIEW+™ Configuration, Network Management and Diagnostic GUI SoftwareDIAGS/E Network Management and Remote Diagnostics Facilities per Radio Modem (E Series)Related ProductsEH450 Hot Standby Base StationER450 Remote Data Radio95MSR 6 and 9 Port Stream Router MultiplexerE SeriesDigital Data Base Station - EB450Information subject to change without notice.© Copyright 2002 Trio DataCom Pty Ltd. All rights reserved. Issue 05/0241 Aster Avenue, Carrum Downs Victoria, Australia 3201 Phone +613 9775 0505 Fax +613 9775 0606 sales@trio.com.au www.trio.com.auFeatures and SpecificationsTrio DataCom’s EB450 is an advanced Full Duplex Base / Repeater Station that complements the ER450 remote data radio modem. E Series data radio modems are suitable for the most complex and demanding digital high speed Point-to-Point and Point-to-Multipoint (Multiple Address Radio) SCADA and telemetry applications.Base stations and repeaters are key elements in data radio communication systems and are subject to heavy duty cycle operation. The EB450 delivers highly reliable, continuous full duplex operations at maximum (5W) output power.The high performance E Series data radio system products also include the EH450 Hot Standby Base / Repeater station.FeaturesRadio and Modem- Fully integrated radio, modem and data multiplexer- True 19,200 bps over-air data rates- Fast data turnaround- Full Duplex Operation- Broad frequency range with fully synthesized all digital radio design- 5 watt transmitter output with 100% duty cycle up to maximum temperature specification (-30° to +60°C, +70°C option)- Housed in a rugged 19” rack mount enclosure- Insurance against obsolescence with field upgradeable firmware in flash memory- Extensive front panel LED diagnostic display- Internal (compact) or external duplexer options- Digital orderwire optionData Ports- Two independent data ports and separate system port- Compatible with most industry standard data protocols. eg: MODBUS, DNP-3, IEC 870 etc.- Selectable 300 - 76.8 k bps asynchronous RS-232 interface- Multistream™ simultaneous data streams allows for multiple vendor devices/protocols to be transported on the one radio network- Flexible data stream routing providing optimum radio channel efficiency- Internal repeater operation - buffered store and forward operation- Unique integrated C/DSMA collision avoidance technology permits simultaneous polling and spontaneous alarm reporting operation in the same systemNetwork Management and Remote Diagnostic option(In conjunction with TView+™ GUI)- Exceptional network management tools- Over-the-air user configuration- Transparent Operation-simultaneous with user data- Separate isolated alarm inputs and outputs- Network wide operation from any radio terminalE SeriesDigital Data Base Station - EB450 Innovative and sophisticateddigital communications designs product s and solutions
Local regulatory conditions may determine the performance and suitability of individual versions in different countries. It is the responsibility of the buyer to confirm these regulatory conditions. Performance data indicates typical values related to the described unit. RadioFrequency Range: 380-520 MHz (various sub-frequency bands available)Frequency Splits: Various Tx/Rx frequency splits - programmableChannel Selection: Dual synthesizer, 6.25 kHz channel stepChannel Spacing: 12.5 or 25 kHzFrequency Stability: ±1ppm (-30 to 60°C ambient, opt. -30 to 70°C) Higher frequency stability options are available (with external GPS reference)Aging: <= 1ppm/annumFull Duplex: Full duplex (optional internal or external duplexer available for single antenna operation)Configuration: All configuration via Windows based softwareTransmitterTx Power: 5W (+37 dBm) ±1 dBsoftware adjustable with over-temperature protection. 100% Duty Cycle.Modulation: Narrow band digital filtered binary GMSKOccupied Bandwidth: Designed to FCC, ETSI, ACA requirementsTx Keyup Time: < 1 mSecond Timeout Timer: Programmable 0-255 secondsTx Spurious: <= -37 dBmPTT Control: Auto (on Data) / RTS line (Port A or B) / System Port (Override)ReceiverSensitivity: -118 dBm for 12 dB SINADSelectivity: Better than 80 dBIntermodulation: Better than 75 dBSpurious Response: Better than 80 dBAFC Tracking: Digital receiver frequency trackingMute: Programmable digital muteDiagnostics (Optional)Network wide operation from any remote terminal.Non intrusive protocol - runs simultaneously with the application.Over-the-air re-configuration of user parameters.Programmable exception reporting of alarms. Storage of data error and channel occupancy statistics. In-built Error Rate testing capabilities.ConnectionsUser Data Ports: 2 x DB9 female ports wired as DCE (modem)System Port: RJ45 (front and rear) for diagnostics, configuration and programmingAntenna: 2 x N female bulkhead (separate Tx and Rx ports)1 x N female bulkhead (with optional internal duplexer)Power: 2 pin locking, mating connector suppliedLED Display: Multimode Indicators for Pwr, Tx, Rx, Sync, TxD and RxD data LEDs (for both port A and B)ModemData Serial Port #1: RS232, DCE, 600-76,800 bps asynchronousData Serial Port #2: RS232, DCE, 300-38,400 bps asynchronousSystem Port: RS232, 19,200 bps asynchronousFlow Control: Selectable hardware/software/3 wire interfaceRF Channel Data Rate: 4800/9600/19,200 bps Full duplexData Buffer: 16 kbyte of on-board RAMBit Error Rate: < 1x10-6 @ -110 dBm (4800 bps)< 1x10-6 @ -108 dBm (9600 bps)< 1x10-6 @ -106 dBm (19,200 bps)Collision Avoidance: Trio DataCom’s unique supervisory channel C/DSMA collision avoidance systemMultistream™: Trio DataCom's unique simultaneous delivery of multiple data streams (protocols)Data Turnaround Time: <10mSFirmware: Field upgradeable FlashmemoryGeneralPower Supply: 13.8 Vdc nominal (11-16 Vdc)Transmit Current: 1.3 A nominal @ 1 W2.5 A nominal @ 5 WReceive Current: < 230 mADimensions: 19” 2 RU rack mount 485 x 90 x 420 mmWeight: 5 kg (excluding optional duplexer)Options DUPLX450Bx Internal / External Duplexers, Band Reject and Band PassEDOVM Digital Order Wire Voice ModuleTVIEW+™ Configuration, Network Management and Diagnostic GUI SoftwareDIAGS/E Network Management and Remote Diagnostics Facilities per Radio Modem (E Series)Related ProductsEH450 Hot Standby Base StationER450 Remote Data Radio95MSR 6 and 9 Port Stream Router MultiplexerE SeriesDigital Data Base Station - EB450Information subject to change without notice.© Copyright 2002 Trio DataCom Pty Ltd. All rights reserved. Issue 08/0241 Aster Avenue, Carrum Downs Victoria, Australia 3201 Phone +613 9775 0505 Fax +613 9775 0606 sales@trio.com.au www.trio.com.auFeatures and SpecificationsTrio DataCom’s EB450 is an advanced Full Duplex Base / Repeater Station that complements the ER450 remote data radio modem. E Series data radio modems are suitable for the most complex and demanding digital high speed Point-to-Point and Point-to-Multipoint (Multiple Address Radio) SCADA and telemetry applications.Base stations and repeaters are key elements in data radio communication systems and are subject to heavy duty cycle operation. The EB450 delivers highly reliable, continuous full duplex operations at maximum (5W) output power.The high performance E Series data radio system products also include the EH450 Hot Standby Base / Repeater station.FeaturesRadio and Modem- Fully integrated radio, modem and data multiplexer- True 19,200 bps over-air data rates- Fast data turnaround- Full Duplex Operation- Broad frequency range with fully synthesized all digital radio design- 5 watt transmitter output with 100% duty cycle up to maximum temperature specification (-30° to +60°C, +70°C option)- Housed in a rugged 19” rack mount enclosure- Insurance against obsolescence with field upgradeable firmware in flash memory- Extensive front panel LED diagnostic display- Internal (compact) or external duplexer options- Digital orderwire optionData Ports- Two independent data ports and separate system port- Compatible with most industry standard data protocols. eg: MODBUS, DNP-3, IEC 870 etc.- Selectable 300 - 76.8 k bps asynchronous RS-232 interface- Multistream™ simultaneous data streams allows for multiple vendor devices/protocols to be transported on the one radio network- Flexible data stream routing providing optimum radio channel efficiency- Internal repeater operation - buffered store and forward operation- Unique integrated C/DSMA collision avoidance technology permits simultaneous polling and spontaneous alarm reporting operation in the same systemNetwork Management and Remote Diagnostic option(In conjunction with TView+™ GUI)- Exceptional network management tools- Over-the-air user configuration- Transparent Operation-simultaneous with user data- Separate isolated alarm inputs and outputs- Network wide operation from any radio terminalE SeriesDigital Data Base Station - EB450 Innovative and sophisticateddigital communications designs product s and solutions

Navigation menu