Tunstall Healthcare A S DLM112 DayLink Monitor DLM112 User Manual
Tunstall Healthcare A/S DayLink Monitor DLM112
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 694269 |
| Application ID | QbFBPNe3t5KpDZG20XwsVw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 26.31kB (328848 bits) |
| Date Submitted | 2006-08-16 00:00:00 |
| Date Available | 2006-08-16 00:00:00 |
| Creation Date | 2006-06-08 15:42:44 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2006-08-08 09:44:39 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS2 (4.0) |
n This device is for use at home. n Power requirements Mains: 120 VAC, 60Hz, 200 mA, Class II, No applied part. Only use the original power supply adapter with the type designation FW7333M/06. n Range of temperatures Operating: +10°C to +40°C / +50 F to +104 F Storage: -10°C to +45°C / +14 F to +113 F Transportation: -20°C to +60°C / -4 F to +140 F n Relative humidity Operating/Storage/Transport: 10% to 95% non-condensing. n Barometric pressure Operating/Storage/Transport: 700-1060 hPa. Dimensions (WxLxH): 156 x 145 x 70mm / 6.2 x 5.7 x 2.8 inches. Weight: 425 g / 15 oz including power supply adapter. n Radio Transmitter: Bluetooth compliance: Version 1.1. Operating frequency: 2.402 to 2.480 GHz. Output power: 1 to 100 mW / Bandwith: <1MHz. Antenna type: Internal Operational range: Up to 100 meters (indoor) depending of surroundings. The internal antenna used for this mobile transmitter must provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. n This device has been tested and found to comply with FCC Part 68. Please read the »US telephone network customer information« in this manual. n This device, including the power supply adapter, is certified to comply with UL60601-1. n This device, including the power supply adapter, is tested according to EN60601-1-2. n Data integrity and security: The privacy of data transmission with this device is secured by data encryption and authentication (SSL), and meets authorized standards under the HIPAA. n Only dispose the DLM112 at an appropriate recycle facility for electronics. Ask RTX for more information. PART# 50100002 US/UK TECHNICAL SP E C I F I C AT I O N S DAYLINK MONITOR • DLM112 • USER MANUAL RTX Healthcare · Stroemmen 6 · DK-9400 Noerresundby · Denmark · Phone: +45 9632 2300 · www.rtx.dk RTX America, Inc. · 2099 Gateway Place · Suite 310 · San Jose · California 95110 · Phone: +1 (408) 441-8600 H O W TO INSTALL AND INSTRUCTIONS FOR USE INTENDE D U S E The Daylink 112 Monitor (“DLM112”) is for use by patients at home. It is intended to be used in combination with a variety of external devices upon prescription of a licensed physician or other authorized healthcare provider. DLM112 serves as the remote communication link between compatible external devices, and the compatible healthcare facility at another location. The healthcare facility could be at a disease management center, or with the healthcare/wellness provider or other out-of-hospital caregivers. The purpose is to collect and transmit selected medical information (such as weight, blood pressure, blood glucose) over a normal residential telephone line. The installation must be performed by or under supervision of an authorized company. This device does not measure, interpret or make any decisions on the vital data that it conveys. Precautions and Warnings This device is not intended for emergency calls, and may not be used for transmission or indication of any real-time alarms or time-critical data. Clinical judgement and experience are sometimes required to check and interpret the measurements collected and transmitted. This device is not for use in systems, which substitute for medical care. This device is not intended for patients requiring direct medical supervision or emergency intervention. Important information n It is important that the cables be carefully arranged and secured to avoid unintended disconnection, or the possibility of tripping or blocking the path of a wheelchair or other moving objects. n Be careful not to use a power socket which may be switched off unnoticed. n Do not install or service the device, power adapter or cables during an electrical storm. n Do not place the DLM112 in extreme climatic conditions (excessive heat or humidity, in direct sunlight or where it may be exposed to large amounts of dust). n Do not place beverages near the DLM112 as spills may easily result in serious damage. n Protect the device and cables from damage. n Keep pets and small children away from the area where the DLM112 and cables are located. FUNCTIONALITY The DLM112 Remote Patient Monitor is used for reception and communication of measurements taken by on-site external devices such as Blood Pressure Monitors, Personal Weight Scales, Blood Glucose Monitors and other compatible devices: The communication will be performed using: n Wireless data connection. n Infrared data connection. n Cable connection. The display on the DLM112 can be used to show questions that can be answered by pushing the keys below the display. A speaker will support the information shown on the display verbally. When the DLM112 has received the measured values and the answers, it generates a call and conveys the data to a remote facility via a public telephone line. In some cases, the DLM112 is programmed to deliver data at a specific time of day. The delivery of data will automatically be repeated if the attempt to deliver data fails. Cleaning and Maintenance The DLM112 may be cleaned with a soft, dry cloth or a cloth dampened with tap water and a mild detergent. A household glass cleaner on a soft, dry cloth may be used to clean off smudges. Never use any solvent, thinner, lighter fluid, alcohol, wet wipes or similar products on the DLM112. Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: n Reorient or relocate the receiving antenna of the other equipment. n Increase the separation between the equipment and receiver. n Connect the equipment into an outlet on a circuit different from the one used for the receiver. n Consult the manufacturer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Modifications not expressly approved by this company could void the user’s authority to operate the equipment. INSTALLATION STEP BY STEP PARTS IDEN T I F I C AT I O N Before installation, please read all the information provided in this manual! Inspect the package for any damage. In the event of damage, please call for service. Always keep the original package for return shipment. n Display with backlight n Yes button n Up button n Speaker volume up n Down button n No button n W indow for infrared communication n Speaker volume down Place the DLM112 in a level position Connect the DLM112 to the telephone system n Power connector n Telephone connector n Line connector n R S232 connector for external devices with cable n Speaker Important Use only the original power supply adapter Friwo FW7333M/06 which comes with the DLM112. The DLM112 contains a small lithium battery. Do not replace. Important When the DLM112 uses the telephone line for data transmission, it will release the telephone line if a normal voice call has to be done. US TELEPHONE NETWORK CUSTOMER INFORMATION INSTALLATION S T E P B Y S T E P This equipment complies with Part 68 of the rules and requirements adopted by ACTA. On the bottom side of this equipment is a label that contains, among other information, a product identifier in the format US: RTXMM00B3320 (SKAL OPDATERES). If requested, this number must be provided to the telephone company. The registration jack USOC for the equipment is RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details. The REN is used to determine the number of Connect the power supply adapter to an electrical outlet devices that devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products the REN is separately shown on the label. If this equipment US:RTX3320 (SKAL OPDATERES) causes harm to the network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a compliant with the FCC if you believe it is necessary. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service. If trouble is experienced with At start-up, follow the information in the display of the DLM112 this equipment US:RTX3320 (SKAL OPDATERES), for repair or warranty information, please contact RTX America, Inc., 2099 Gateway Place, Suite 310, San Jose, California 95110. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. Important After installation, always check that the telephone can be used for making calls as usual. Avoid disconnecting the power supply adapter from the DLM112. Make sure that the power source cannot be switched off unnoticed. Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or corporation commission for information. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment US:RTX3320 (SKAL OPDATERES) does not disable your alarm equipment. If you have questions about Switching the DLM112 off If necessary the DLM112 can be switched off by unplugging the power supply adapter from the electrical outlet. In connection with problems with the telephone line or the DLM112, please disconnect the DLM112 to make the call. what will disable alarm equipment, consult your telephone company or a qualified installer.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Producer : Adobe PDF Library 7.0 Trapped : False Create Date : 2006:06:08 15:42:44+02:00 Modify Date : 2006:08:08 09:44:39+01:00 Metadata Date : 2006:08:08 09:44:39+01:00 Creator Tool : Adobe InDesign CS2 (4.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 2607 bytes, use -b option to extract) Instance ID : uuid:bb4c841a-972a-4c92-8715-c0830deb573f Document ID : adobe:docid:indd:02437204-f179-11da-8f81-e2d5781af76f Rendition Class : proof:pdf Derived From Instance ID : 02437202-f179-11da-8f81-e2d5781af76f Derived From Document ID : adobe:docid:indd:813e1589-e8e7-11da-9032-826701c2eb82 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:C529379EF31A11DA858AF98F4E40E41D, uuid:C529379EF31A11DA858AF98F4E40E41D, uuid:62CE1783F87111DA9398FD491C0D1831, uuid:12566DAEF31A11DA858AF98F4E40E41D, uuid:12566DABF31A11DA858AF98F4E40E41D, uuid:7B9F1B80F86D11DA9398FD491C0D1831, uuid:19F81722F87111DA9398FD491C0D1831, uuid:19F81727F87111DA9398FD491C0D1831, uuid:4311B2A0F87011DA9398FD491C0D1831, uuid:6C86D329F86F11DA9398FD491C0D1831, uuid:F4D7DF25F22911DA958681DFC262A9C3, uuid:4311B29BF87011DA9398FD491C0D1831, uuid:62CE1787F87111DA9398FD491C0D1831, uuid:19F8172CF87111DA9398FD491C0D1831 Manifest Reference Document ID : uuid:C529379DF31A11DA858AF98F4E40E41D, uuid:C529379DF31A11DA858AF98F4E40E41D, uuid:62CE1782F87111DA9398FD491C0D1831, uuid:12566DADF31A11DA858AF98F4E40E41D, uuid:12566DAAF31A11DA858AF98F4E40E41D, uuid:7B9F1B7FF86D11DA9398FD491C0D1831, uuid:4311B2A4F87011DA9398FD491C0D1831, uuid:19F81726F87111DA9398FD491C0D1831, uuid:4311B29FF87011DA9398FD491C0D1831, uuid:6C86D328F86F11DA9398FD491C0D1831, uuid:6D2B8109F22911DA958681DFC262A9C3, uuid:4311B29AF87011DA9398FD491C0D1831, uuid:40133629F87111DA9398FD491C0D1831, uuid:19F8172BF87111DA9398FD491C0D1831 Format : application/pdf Has XFA : No Page Count : 4 Creator : Adobe InDesign CS2 (4.0)EXIF Metadata provided by EXIF.tools