Turning Technologies RRAP01 Turning User Manual UserManual

Download:
Mirror Download [FCC.gov]
Document ID	2564244
Application ID	AbeGWqW62Bn/HDlI1O6row==
Document Description	UserManual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.15kB (539331 bits)
Date Submitted	2015-03-24 00:00:00
Date Available	2015-03-24 00:00:00
Creation Date	2014-11-11 16:20:34
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-03-24 13:10:17
Document Title	Microsoft Word - RF Net Preliminary Quick Start Guide.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Turning Quick Start Guide
Overview
Turning is a high performance Wi‐Fi Access Point combined with a Turning Technologies RF receiver. As
an access point, Turning supports the 802.11 a/b/g/n IEEE standard and will support 60 simultaneous
client connections in the 2.4GHz ISM band. In addition to Wi‐Fi access point functionality, the Turning
Technologies RRDR‐01 RF dual‐radio receiver supports data collection from Turning Technologies
response devices and polling applications. The included storage also provides delivery of classroom
content regardless of connectivity external to the classroom, thus providing a reliable classroom
network for administering learning content and engaging students via Turning Technologies offerings.
Hardware
The Turning model RRAP‐01 enclosure exposes two connectors and three LEDs.
Connectors
The RJ‐45 connector is for connecting to a Wide Area Network (WAN) and optionally powering the unit.
Thee RJ‐45 connector supports 10/100/1000 Base‐T Ethernet. The RJ‐45 connector also supports Power
over Ethernet (POE). If the network wiring supports POE this is the only connection needed.
A power connector jack is also provided to support installations without POE wiring. A wall transformer
style power supply is included with the unit.
LEDS
Four LED indicate the unit’s status. They are:
•
Green Unit Status
•
Red
Unit Status
•
Blue
•
Blinks twice every second
On until unit boots or after an unrecoverable error has occurred
Wi‐Fi Status
On when the Access Point Wi‐Fi is running
Yellow Ethernet Status
On when the Ethernet port is connected and running
Internally Accessed Hardware
Inside the RRAP‐01 enclosure are the following hardware:
•
A microSD connector with 8 Gb microSD card
•
2 Red LED indicating read / write access to the microSD slot
•
A System Reset button
•
resets the units processor and hardware
A User button – resets the User Configuration to factory defaults
Must be held for 5 seconds
•
An RJ‐45 ethernet connector
•
A mini USB connector – USB to Serial bridge
•
bridged to the Wi‐Fi network (10.4.0.x)
U‐Boot / Linux console
A replaceable coin battery – clock battery
Power up
After powering the unit, either with the power adapter or POE, it will perform the following boot up
sequence reflected by its LEDs:
•
Power applied, 1st boot stage
•
2nd boot stage, U‐Boot started
•
Red, Green, Blue, Yellow LEDs on
3rd boot stage, OS kernel started
•
Red, Blue, Yellow LEDs on
Green LED on
Running
Green LED blinks twice quickly once per second
Blue LED on
Yellow LED may be on or off dependent of the ethernet status
Connecting with Wi­Fi
After powering on the unit the access point is ready for connections. The unit’s SSID is based on its
unique Ethernet MAC address. It’s SSID is in the format of “RRAP‐xx‐yy‐zz” where z”xx‐yy‐zz_ are the
least significant three bytes (6 digits) of the unit’s Ethernet MAC address.
The default Wi‐Fi configuration is 802.11n.
The default security configuration is WPA2‐PSK. The default passkey is “Turn1ngT3ch”.
To make a connection from Windows 7:
•
Click on the wireless icon (bar) in the lower right corner of the desktop
•
Find the “RRAP…” connection, select it and click Connect
•
When Prompted, enter the password “Turn1ngT3ch”
Web Based Configuration
Once connected to the access point, its web based configuration may be used to configure the Wi‐Fi and
system settings.
To access the Web Based Configuration open an internet browser and enter the address
“10.4.0.1:10000”
A login dialog is displayed. Enter the default username “root” and the default password “root” for the
password.
After a successful login you will be brought to the system status page
Connecting with SSH
For advanced configuration and usage a secure shell (SSH) connection is available at the default IP
address of “10.4.0.1”. The super user account “root” can be accessed with the default password
“Sassafras”.
The following screen shots illustrate making an SSH connection with “Tera Term”, a freely downloadable
terminal emulation program.
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTICE:
Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void
the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance of 20 cm between the radiator and your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2014:11:11 16:20:34+08:00
Modify Date                     : 2015:03:24 13:10:17+01:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2015:03:24 13:10:17+01:00
Format                          : application/pdf
Title                           : Microsoft Word - RF Net Preliminary Quick Start Guide.docx
Creator                         : Administrator
Document ID                     : uuid:6eb667b1-3ba1-4068-9618-948ee11fe7ec
Instance ID                     : uuid:648cfad3-245c-49d7-b998-fd9b9130a1a5
Page Count                      : 10

EXIF Metadata provided by EXIF.tools