Twin Star TS-1806 SOUND SYSTEM User Manual Manual

Twin-Star International Inc. SOUND SYSTEM Manual

Manual

Operation Instruction Wiring1. L AUX IN R - RCA plug AUX IN for connecting to an audio source2. DC 16V IN - Connect the power supply3. SUB OUT - Subwoofer output for connecting to a subwoofer4. OPTICAL IN - Input the console using Optical cable5. Wireless subwoofer connection (USB) port: Will power and support transmit bass from optional Bell'O Digital wireless RF USB Dongle to Bello digital Wireless RF Subwoofer.Adapter Input AC100-240V, 50/60HzAdapter Output DC16V/ 3.0APower Consumption 40 WattsStandby Power Consumption < 1 WPeak Music Power Output 200 W
Operation Instruction 1. Button - Turns the unit2. Button - To scroll through the BT - Bluetooth AU - AUX Input OP - Optical Input3. Button – volume increaseControl PanelRemote Control - Power / Standby- Mute- Optical in- Bluetooth (Hold down to pair for 3 seconds)- AUX Input- Volume Increase- Volume Decrease- Voice Boost (Enhances dialog in noisy envoronments)- Bass Boost (Enhances the bass sound)- Back (Previous) - Play/Pause- Forward (Next)Works with Bluetooth devices only.Note: A short delay in response is normal.LED Display FunctionLight FlashOP BTAU 00-30 00-30ON/OFFON/OFFON/OFFb PL F4. Button - volume decrease5. Button- Previous song6. Button- Play/Pause7. Button- Next song
Operation Instruction ContinuedSelect an input: Use the Button on the control panel to scroll through the inputs, or select the input on the remote control. Bluetooth Pairing Process: 1) Make sure your wireless device is ready for pairing. If you are unsure how to do this, check the manual that came with your device.2) To start the pairing process: Control Panel: or Remote: Pairing: when it is paired. NOTE: Only 1 device can play through the sound shelf at a time. Please disconnect the other device if you cannot connect.DISPLAY MESSAGESBT - Bluetooth mode speaker.
Operation Instruction ContinuedLearning Function(Note: Remote must send infrared signals). Any unused button on your TV remote control can be used to control the Sound Shelf. For example, when you connect your TV to the Sound Shelf using the RCA Stereo cables or Digital Fiber Optic Cable the TV volume and mute will no longer be controlled by the remote that came with it. Some TV remotes also come with extra Some of the programmable functions need to be selected from the remote control as noted below.To start the learning function:• Press POWER and VOL + together for 3 seconds to learn mode. SEL • Select the function to learn on the control panel or remote. Point your TV remote shelf and hold down the button you want it learn from. simultaneously beeps 2 times. SEL You can now select the next function to learn or end the process by pressing the POWER butting an VOL+ for 3 seconds. V + Volume up [control panel or remote control] V - Volume down [control panel or remote control] MT Mute [control panel or remote control] ON Power [control panel or remote control] SO Source [control panel ] OP Optical [remote control] BL Bluetooth [remote control] AU Aux [remote control] BA Track Back [remote control] FO Track Forward [remote control] PL Play [remote control] VB Voice Boost [remote control] BB Bass Boost [remote control] SU Surround [remote control]Note: It is able to learn most IR protocols, not all can be programmed.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note: This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.FCC Radiation Exposure StatementThis equipment complied with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cmbetween the radiator & your body.Waring

Navigation menu