Twinhead X11BKA WLAN and BT, 2x2 PCIe M.2 2230 adapter card User Manual Twinhead U12C

Twinhead International Corporation WLAN and BT, 2x2 PCIe M.2 2230 adapter card Twinhead U12C

User manual

EN-1
EN-2
Table of Contents
BEFORE YOU START ...................................................................................... 4
PACKAGE CONTENTS ..................................................................................... 4
PRODUCT OVERVIEW .................................................................................... 6
Front View ............................................................................................................. 6
Back View .............................................................................................................. 8
Top View ............................................................................................................... 9
Bottom View .......................................................................................................... 9
Left View ............................................................................................................. 10
Right View ........................................................................................................... 10
STATUS INDICATORS ................................................................................... 11
GETTING STARTED ................................................................ 12
INSTALLING THE BATTERY ............................................................................. 12
Charging the Battery ............................................................................................. 12
When to replace the Battery Pack ........................................................................... 13
Removing the Battery ........................................................................................... 13
REMOVING THE SSD KIT ............................................................................. 14
REPLACING THE SSD MODULE ....................................................................... 15
INSTALLING THE SSD KIT ............................................................................ 17
CONNECTING THE POWER ............................................................................. 18
Connecting the AC Adapter .................................................................................... 18
Using Battery Power .............................................................................................. 18
STARTING YOUR TABLET PC .......................................................................... 19
Turning On Your Device ......................................................................................... 19
Turning Off Your Device ......................................................................................... 19
OPERATING YOUR TABLET PC .................................................... 20
USING THE QUICK MENU .............................................................................. 20
Quick Menu Overview ............................................................................................ 20
Viewing the Version Information ............................................................................. 21
Viewing the Battery Charge Cycles .......................................................................... 21
Configuring the Programmable Button (P1) .............................................................. 21
Configuring the Programmable Button (P2) .............................................................. 22
Assigning an Application the P2 Button .................................................................... 22
Configuring the Up/Down Keys (

) ...................................................................... 23
Accessing the Mobility Center ................................................................................. 23
Configuring the Touchscreen Settings ...................................................................... 24
Configuring External Antenna Switching Mode .......................................................... 25
Configuring Adaptive Brightness Settings ................................................................. 25
USING THE CAMERA .................................................................................... 26
Opening Camera App ............................................................................................ 26
Taking Photos ...................................................................................................... 27
EN-3
Recording Videos .................................................................................................. 28
Adjusting Brightness ............................................................................................. 29
Setting Photo Timer .............................................................................................. 30
Configuring Camera Settings .................................................................................. 30
Viewing Photos/Videos .......................................................................................... 31
MAKING CONNECTIONS ........................................................ 32
INSTALLING THE MEMORY CARD ...................................................................... 32
INSTALLING THE SIM CARD .......................................................................... 33
INSTALLING THE SMART CARD ........................................................................ 34
CONNECTING THE MICROPHONE/HEADSET ................................................................. 35
CONNECTING USB DEVICES .......................................................................... 36
CONNECTING TO EXTERNAL DISPLAY ................................................................ 37
CONNECTING TO WIRELESS CONNECTIONS ......................................................... 38
USING THE BIOS SETUP UTILITY .......................................... 45
BIOS SETUP MENU .................................................................................... 45
MAIN MENU ............................................................................................. 47
ADVANCED MENU ...................................................................................... 48
BOOT MENU ............................................................................................. 49
SECURITY MENU ........................................................................................ 50
SAVE & EXIT MENU .................................................................................... 51
APPENDIX ............................................................................. 52
COPYRIGHT .............................................................................................. 52
REGULATORY STATEMENT .............................................................................. 52
Federal Communications Commission Statement ...................................................... 52
Declaration of Conformity ...................................................................................... 53
RF exposure warning ............................................................................................. 53
Battery Disposal ................................................................................................... 53
WARNING EXPLOSION HAZARD ............................................................................. 53
CLASS 1 LASER PRODUCT ..................................................................................... 54
SAFETY INSTRUCTIONS ................................................................................ 56
Before You Start
EN-4
Before You Start
Congratulations on your purchase of this tablet PC.
This fully-rugged tablet PC is portable and provides users with maximum mobile
computing experience in a wide range of working environments. Before you
begin using your tablet PC, read this chapter to familiarize yourself with the main
components installed in the system.
Package Contents
If any of following items is damaged, please contact your retailer.
Tablet PC
AC adapter
Power cord
Capacitive stylus pen
Digitizer pen
(for panel with DG function)
(optional)
Keyboard dock (optional)
Office dock (optional)
Car adapter (optional)
8-bay battery charger
(optional)
Before You Start
EN-5
2-bay battery charger
(optional)
Folio case (optional)
Rotate strap (optional)
Soft handle (optional)
Shoulder strap (optional)
NOTE
The pictures are for reference only, actual items may slightly differ.
Before You Start
EN-6
Product Overview
Front View
Item
Description
Microphones
Record the surrounding sound.
Ambient light sensor
Use to detect the current level of visible light in the
surrounding environment.
Front camera
Use for video conference.
Status indicators
Indicate the corresponding function status.
Power button
Press to turn your tablet PC on or off.
Programmable
buttons
P1: Press to activate the assigned function.
- Stealth mode button (by default).
- Night Vision button.
- Disable (no function).
P2: Press to activate the assigned function.
- Scanner button (if the barcode scanner is
integrated).
Before You Start
EN-7
Item
Description
- Touch screen mode selection.
- Shortcut key for launching the specific
application.
- Disable (no function).
Up/Down buttons
: Press to activate the assigned function.
- Increase the LCD panel brightness level (by
default).
- Increase the volume level.
- Disable (no function).
: Press to activate the assigned function.
- Decrease the LCD panel brightness level (by
default).
- Decrease the volume level.
- Disable (no function).
Before You Start
EN-8
Back View
Item
Description
Speakers
Emit sound.
SSD kit latch
Lock the SSD kit in place.
SSD kit compartment
Contain the SSD module.
Camera LED flash
Provide additional lighting when taking pictures
under low light environment.
Rear camera
Use to take pictures.
Fingerprint scanner
Scan the fingerprint for biometric identification.
Battery compartment
Contain the battery.
Battery latch release
button
Press and hold the button to slide the battery
latch to the unlock position.
Before You Start
EN-9
Top View
Item
Description
RS232 port
(for selected model)
Connect a serial peripheral device.
USB port
(for selected model)
Connect a USB peripheral device.
Barcode scanner
(for selected model)
Scan barcodes.
Bottom View
Item
Description
RF Pass-thru
connector
(for selected model)
Use for the external WLAN antenna.
Use for the external GNSS antenna.
Use for the external WWAN antenna.
Docking connector
Connect the tablet PC to a docking station.
Before You Start
EN-10
Left View
Item
Description
Strap holes
Attach the strap for the stylus pen.
Kensington lock slot
Connect a Kensington-compatible tablet PC
security lock.
Smart card reader
(for selected model)
Use to insert smart cards.
Right View
Item
Description
DC-in jack
Connect the power adapter.
Mini DisplayPort
Connect to an external display.
USB 3.0 port
Connect USB 3.0 peripheral devices.
RJ-45 jack
Connect to a local area network (LAN) using an
Ethernet cable.
Memory card slot
Use to insert memory cards to transfer pictures,
music, and data between your Tablet PC and flash
compatible devices. The card reader supports
micro-SDHC and micro-SDXC.
SIM card slot
Use to insert a SIM card for WWAN module
connection.
Audio Combo jack
Connect a headphone or an external speakers or
microphone.
Before You Start
EN-11
Status Indicators
The status indicators of the tablet PC light up when a particular function of the
tablet PC is active.
Icon
Item
Description
Power
The LED always lights on (green) when the system is
running. When the system is in sleep mode, the LED
blinks.
Battery
Indicate the battery status:
Green: when battery is fully charged (95% or above)
Orange: when battery is charging
Flashing orange: charging error
Red: when battery capacity is lower than 10%
Off: when discharged
Windows
Airplane
mode
Indicate the airplane mode status:
Blue: the airplane mode is disabled
Off: the airplane mode is activated
Getting Started
EN-12
Getting Started
This chapter will help you get started using the device.
Installing the Battery
To install the battery, follow the steps below:
1. Align and insert the battery to the
battery compartment.
2. Push completely until the battery locks
into place.
3. Slide the battery latch to the lock
position to secure the battery.
Charging the Battery
The Lithium-ion battery is not fully-charged upon purchase.
To charge the battery, follow the steps below:
1. Install the battery to your tablet PC. See procedures above.
2. Connect the AC adapter to the DC-in jack of your tablet PC.
3. Connect the AC adapter to the power cord.
4. Plug the power cord to an electrical outlet.
Getting Started
EN-13
When to replace the Battery Pack
The battery performance gradually decreases over time and usage. We recommend
you to replace your battery pack after 18 to 24 months of usage.
Removing the Battery
To remove the battery, follow the steps below:
1. Press and hold the battery latch release
button to slide the battery latch to the
unlock position.
2. Remove the battery out of the battery
compartment.
Getting Started
EN-14
Removing the SSD Kit
To remove the SSD kit, follow the steps below:
1. Slide the SSD kit latch to the unlock
position.
2. Remove the SSD kit out of its
compartment.
Getting Started
EN-15
Replacing the SSD Module
To remove the SSD module, follow the steps below:
1. Remove the four screws securing the
SSD module cover.
2. Remove the SSD module cover.
3. Detach the conductive tape to access the
SSD module.
Getting Started
EN-16
4. Remove the three screws securing the
SSD module and the memory adapter
board.
5. Remove the SSD module assembly.
6. Pull to disconnect the SSD module from
the memory adapter board connector.
NOTE
To install a new SSD module, reverse procedures step 1 through 6 above.
Getting Started
EN-17
Installing the SSD Kit
To install the SSD kit, follow the steps below:
1. Align and insert the SSD kit to its
compartment.
2. Slide the SSD kit latch to the lock
position to secure the SSD kit.
Getting Started
EN-18
Connecting the Power
Your tablet PC can be powered up using the AC adapter or the Lithium-ion battery.
Connecting the AC Adapter
The AC adapter powers up your tablet PC and charges the battery.
1. Connect the AC adapter to the DC-in jack of your tablet PC.
2. Connect the AC adapter to the power cord.
3. Plug the power cord to an electrical outlet.
Using Battery Power
1. Install a charged battery in the battery compartment.
2. Remove the AC adapter (if plugged). Your tablet PC will automatically use the
battery power.
NOTE
If your tablet PC is connected to an electrical outlet and the battery is installed,
your tablet PC uses power from the electrical outlet.
Getting Started
EN-19
Starting Your Tablet PC
Turning On Your Device
Press the button until the Power LED lights up.
Turning Off Your Device
It is important to properly shut down your tablet PC to avoid the loss of unsaved
data. To shut down your tablet PC, do the following:
Tap > > Shut down.
Wait for your notebook to turn off power
completely before removing the power
source (if necessary).
Operating Your Tablet PC
EN-20
Operating Your Tablet PC
This chapter will guide you on how to use your Tablet PC.
Using the Quick Menu
To enter the Quick menu, tap the arrow on the
task bar to display hidden icons. Then tap the
Quick Menu icon ( ).
You can also access the Quick menu in the All
apps list.
Quick Menu Overview
NOTE
If the tab is green (i.e. ), this
indicates the current function is
activated.
Operating Your Tablet PC
EN-21
Viewing the Version Information
On the Version section, you can view the Bios version, EC version, and Quick Menu
version.
Viewing the Battery Charge Cycles
On the Battery Charge Cycles section, you can view the battery charge cycle and
battery status.
Configuring the Programmable Button (P1)
On the P1 Button Setting section, you can assign the function for the P1 button.
There are three available options:
Stealth Mode: Turn off the LCD backlight, LEDs, speakers, camera flash, and
RF devices.
Night Vision Mode: Adjust the brightness of the LCD under 1.7 nits and turn
off the LEDs and camera flash.
Off: No function.
Operating Your Tablet PC
EN-22
Configuring the Programmable Button (P2)
On the P2 Button Setting section, you can assign the function for the P2 button.
There are four available options:
Touch Screen Mode: Toggle the touch screen mode.
Launch Application: Shortcut key for launching the specific application. To
assign the application, refer to the Assigning an Application the P2 Button
section.
The default application is Quick menu.
Barcode trigger: Scan the barcode (if the barcode scanner is integrated).
Off: No function.
Assigning an Application the P2 Button
Tap the P-Key tab to assign an application to the P2 button. Select the desired
application and click Open.
Operating Your Tablet PC
EN-23
Configuring the Up/Down Keys ()
On the Up/Down Button Setting section, you can assign the function for the
and buttons.
There are three available options:
Brightness adjustment: Adjust the LCD panel brightness level.
Volume adjustment: Adjust the volume level.
Off: No function.
Accessing the Mobility Center
Tap the Mobility Center tab to adjust or configure the brightness, volume level,
battery status, screen orientation, external display, sync, and presentation
settings.
Operating Your Tablet PC
EN-24
Configuring the Touchscreen Settings
Your tablet PC is equipped with a touchscreen. Using the touchscreen, you can
navigating the screen by using touch gestures (any input from your finger, a glove,
or a stylus).
CAUTION!
Do not use any sharp object on the touchscreen to prevent scratches.
NOTE
An optional protect film has been attached to the screen before shipment.
You should change the film when it gets worn out.
You can select the desired touch screen mode in the Quick menu.
Select one of the available options:
: Select Finger/Water if you are using your fingertips.
: Select Glove if you are wearing gloves.
: Select Stylus if you are using a stylus.
NOTE
If the touch screen mode is set to Glove or Stylus and the touchscreen is
wet (i.e. spilled by liquid), the touch function will not respond to any input.
Make sure to keep the screen dry to ensure proper operation.
If you assign the P2 button as Touch Screen Mode (refer to page 22), you
can easily switch the touch screen mode by simply pressing the P2 button.
Operating Your Tablet PC
EN-25
Configuring External Antenna Switching Mode
Select the respective external antenna tab to configure the setting.
Tap the Wi-Fi Antenna tab to enable/disable the device to automatically
switch to the external WLAN antenna when it is affixed on a docking station.
Tap the LTE Antenna tab to enable/disable the device to automatically switch
to the external WWAN antenna when it is affixed on a docking station.
Tap the GPS Antenna tab to enable/disable the device to automatically switch
to the external GPS antenna when it is affixed on a docking station.
NOTE
If the tab is green, this indicates the current function is activated.
Configuring Adaptive Brightness Settings
Tap the Adaptive Brightness tab to enable/disable the device to automatically
adjust the brightness level according to the ambient light.
Operating Your Tablet PC
EN-26
Using the Camera
Using the Camera application, you can use this tablet PC to take photos or videos.
Opening Camera App
To access the Camera application, do one the following:
a. Tap > Camera.
b. In Cortana search box, enter ‘camera’. Then tap Camera.
Operating Your Tablet PC
EN-27
Taking Photos
Tap to capture a photo.
NOTE
To switch between front and rear cameras, tap .
Operating Your Tablet PC
EN-28
Recording Videos
1. Tap to switch to Video mode.
2. Press to start recording a video. The recording time appears on the
bottom on the screen.
3. To stop recording the video, tap .
Operating Your Tablet PC
EN-29
Adjusting Brightness
1. Tap to switch to Pro mode.
2. Tap to display the brightness control slider.
3. Do the following:
Tap and drag upwards to brighten your photo or video.
Tap and drag downwards to darken your photo or video.
Operating Your Tablet PC
EN-30
Setting Photo Timer
Tap to toggle the desired time delay.
: Self-timer is off
: 2-second self-timer
: 5-second self-timer
: 10-second self-timer
Configuring Camera Settings
1. Tap to enter the Settings menu.
2. Select the desired menu option and setting.
Menu Option
Description
Press and hold
camera button
Set the action when you tap and hold the Camera button.
Video Tap and hold the Camera button to create a
Operating Your Tablet PC
EN-31
video.
Photo burst Tap and hold the Camera button to take
photos continuously.
Disabled Disable the function.
Aspect ratio
Select the aspect ratio of the photos.
Framing grid
Show or hide the framing grid lines.
Time lapse
Set the setting is set to On, the system will keep taking
photos until the Camera button is pressed.
Video recording
Set the video resolution.
Flicker reduction
Select 50 Hz or 60 Hz to reduce the flickering that may
occur when recording video under fluorescent light.
Related settings
Select the related settings that can only be configured in
Settings app.
Viewing Photos/Videos
After taking a photo or recording a video, tap the thumbnail (in the bottom-right
corner) to view the most recent photo or video taken.
Swipe right to see other photos or videos in your collection.
Making Connections
EN-32
Making Connections
This chapter will guide you on installing peripheral devices to maximize the use
of your tablet PC.
Installing the Memory Card
Your Tablet PC supports different types of memory cards to provide faster data
transfer.
Supported types: Micro SDHC, Micro SDXC
1. Slide to the left to open the memory/SIM card cover.
2. Push the memory card into the memory card slot until it clicks into place.
3. Close the memory/SIM card cover.
Making Connections
EN-33
Installing the SIM Card
You can use a SIM card for wireless internet access.
NOTE
Check the availability of service and plan rates of data connection with your
network service provider.
It is recommended turn off the tablet PC before you insert the SIM card.
1. Slide to the left to open the memory/SIM card cover.
2. Push a valid SIM card into the SIM card slot until it clicks into place.
3. Close the memory/SIM card cover.
Making Connections
EN-34
Installing the Smart Card
Your tablet PC is equipped with a built-in smart car make secure purchases, store
security information, and provide identification and information using a smart
card.
1. Pull to open the smart card cover.
2. Insert a smart card into the smart card slot.
3. Close the smart card cover.
Making Connections
EN-35
Connecting the Microphone/Headset
Your tablet PC is equipped with audio combo jack that enables you to use the
headset or microphone.
To connect to a headset, open the memory/SIM card cover and plug the
stereo headphone cable into the audio combo jack of your device.
To connect to a microphone, open the memory/SIM card cover and plug the
microphone cable into the audio combo of your device.
NOTE
The headset and microphone are not included in the package. They are sold
separately.
Making Connections
EN-36
Connecting USB Devices
You can connect your tablet PC to other USB devices, such as a mouse,
keyboard, digital camera, printer, or an external hard disk drive.
1. Slide to the right to open the I/O port cover.
2. Connect one end of the USB cable to the USB port of your device.
3. Connect the other end of the cable to the USB device (if necessary).
NOTE
The USB cable is not included in the package. It is sold separately or it may
come with your USB device.
Making Connections
EN-37
Connecting to External Display
You can connect an additional display to your tablet PC using the mini
DisplayPort cable.
1. Slide to right to open the I/O port cover.
2. Connect one end of the mini DisplayPort cable to the mini DisplayPort of your
device.
3. Connect the other end of the cable to the external display.
NOTE
The mini DisplayPort cable is not included in the package. It is sold separately.
Making Connections
EN-38
Connecting to Wireless Connections
Your tablet PC can connect and communicate with other Bluetooth-enabled
devices.
NOTE
Do not disassemble the bumper. Otherwise, the antenna may be damaged,
resulting in poor reception.
Connecting to a Bluetooth Device
Your tablet PC can connect and communicate with other Bluetooth-enabled
devices. By default, the Bluetooth function is disabled.
To add a device, follow the steps below:
1. Tap on the system tray. Then tap Bluetooth to enable the function.
2. Tap the arrow icon ( ) on the system tray to display hidden icons.
3. Tap the Bluetooth icon ( ) and select Add a Bluetooth Device.
Making Connections
EN-39
4. Tap + and select the kind of device you want to add.
5. Select the device you want to connect. Verify the pairing code on the screen
of your device and pairing device match, then tap Connect to start pairing.
NOTE
If the device that you want to add does not appear on the screen, please
check if the device is turned on and discoverable.
Making Connections
EN-40
6. Tap Done to complete the pairing connection.
NOTE
Most Bluetooth-enabled devices need to be paired with your tablet PC. The
PIN you enter on the tablet PC must be the same PIN to be entered on the
other Bluetooth device.
Once a partnership has been created, connecting to that device again will no
longer require entering the PIN.
To disconnect from the Bluetooth-enabled device, select the device in the
Bluetooth menu and tap Remove device.
Making Connections
EN-41
Connecting to a Wireless Local Area Network
Your tablet PC comes with a WLAN module. A wireless network can be added
either when the network is detected or by manually entering the settings
information.
To connect, follow the steps below:
1. Tap the wireless network icon ( ) on the system tray.
TIP
If you do not see the wireless network icon, tap on the system tray, and
tap Wi-Fi to enable the Wi-Fi function.
2. Available wireless network connections are displayed. Tap the desired
wireless network.
Making Connections
EN-42
3. Tap Connect.
Some networks require a network security key or a password.
TIP
Check Connect automatically box to automatically connect to this network
when it is available.
4. Enter the network security key.
7. Tap Next. After the connection is established, you can see the wireless icon
( ) in the Notification area.
NOTE
Wi-Fi access requires service from a wireless service provider. Contact your
service provider for more information.
Actual wireless connectivity will depend on system configuration. Please
contact your dealer for more information.
To disconnect from the wireless network, select the network in the wireless in
the wireless network list and tap Disconnect.
Making Connections
EN-43
Connecting to a Wireless Wide Area Network (WWAN)
With WWAN function, it allows your tablet PC to connect to the Internet using
mobile or cellular data networks.
To connect, follow the steps below:
1. Insert a valid SIM card into the SIM card slot (refer to page 33).
2. Tap the cellular network icon ( ) on the system tray. Then tap Cellular to
enable the Internet connection via mobile data network.
TIP
If you do not see the cellular network icon, tap on the system tray, and
tap Cellular to enable the function.
Making Connections
EN-44
3. Select the mobile network carrier and tap Connect to establish the
connection.
TIP
Check Let Windows manage this connection box to allow the system to
automatically connect to this mobile data network.
Using the BIOS Setup Utility
EN-45
Using the BIOS Setup
Utility
Your tablet PC has a BIOS setup utility which allows you to configure important
system settings, including settings for various optional functions of the tablet PC.
This chapter explains how to use the BIOS setup utility.
BIOS Setup Menu
The BIOS Setup Utility allows you to configure your Tablet PC basic settings.
When you turn your tablet PC on, the system reads this information to initialize
the hardware so that it can operate correctly. Use the BIOS setup utility to
change your tablet start-up configuration. For example, you can change the
security and power management routines of your system.
Starting the BIOS Setup Utility
You can only enter the BIOS setup utility as the tablet PC is booting, that is
between the time you turn on the tablet PC and before the Windows interface
appears.
If your tablet PC is already on, shut down your tablet PC completely (power off)
and restart it and then do the one of the following steps to enter the setup utility:
Press the P1 key.
Tap Setup (on the upper right corner of the screen) when the DURABOOK
logo appears.
Press the Delete button on the keyboard.
NOTE
If you want to use a keyboard, you have to connect your device with an
external keyboard first before starting the BIOS Setup Utility.
Using the BIOS Setup Utility
EN-46
Navigating and Entering Information in BIOS
Use the following keys to move between fields and to enter information:
Keyboard
Description
Select screen
/ Click
Select item
Enter /
Double-click
Select
+ / -
Change Opt.
F1
General Help
F2
Previous Values
F3
Optimized Defaults
F4
Save & Exit
Esc
Exit
Users are allowed to enter new values to replace the default settings in certain
fields, and the rest of the fields are specified by system default parameters and
cannot be modified by users. Reverse the attribute of the main options and
press the Enter button to enter into the submenu. Press the Esc button to
return to the previous configuration page. To display the Help screen at any
time, simply press the F1 button.
Using the BIOS Setup Utility
EN-47
Main Menu
The Main menu displays the system overview information about the device,
including the system date and time.
Item
Description
BIOS Information
Display the BIOS version detected during boot up.
System Information
Display the CPU type and speed, total memory, mainboard
version, PCH SKU, ME FW version, and ME Firmware SKU.
UUID
Display the UUID (Universally Unique Identifier).
Serial Number
Display the serial number of the device.
System Date
Set the system date.
System Time
Set the system time.
Using the BIOS Setup Utility
EN-48
Advanced Menu
The Advanced menu allows you to configure specific system settings.
Item
Description
CPU Configurations
Configure the CPU parameters.
Key Definitions
Configure the Key Definition settings under Windows.
Device Configurations
Configure the device settings including USB3.0 port, LAN,
SD card reader, TPM device, HD audio, finger print scanner,
touch screen, PCMCIA/ExpressCard, front camera, rear
camera, digitizer, barcode, wireless LAN, Bluetooth,
WWAN, and GPS.
Antenna Switching
Configurations
Configure the external WLAN, GPS, or WWAN antenna
setting.
Power Configurations
Configure the power management settings including
resume on AC power, wake on LAN from S3/S4, wake on
wireless LAN from S3/S4, and USB3.0 power share.
TPM Configurations
Configure Trusted Computing settings.
Battery Calibration
Perform battery calibration.
Touch screen mode
select
Select the touch screen mode.
Using the BIOS Setup Utility
EN-49
Boot Menu
The Boot menu allows you to configure the boot settings and boot sequence.
Item
Description
Bootup NumLock
State
Select the keyboard NumLock state.
Launch CSM
Enable/Disable CSM support.
Launch Network PXE
OpRom
Control the execution of UEFI and Legacy PXE OpROM.
Option ROM
Messages
Set the display mode for Option ROM
Boot Option Priorities
Set the system boot order.
Using the BIOS Setup Utility
EN-50
Security Menu
The Security menu allows you to set or change the Administrator and User
passwords.
Item
Description
Administrator
Password
Set the Administrator password.
Secure Boot
Customize the Secure Boot settings.
Using the BIOS Setup Utility
EN-51
Save & Exit Menu
The Save & Exit menu allows you to save/discard the changes and restore the
default values for all setup options before leaving the BIOS Setup Menu.
Item
Description
Save Changes and
Reset
Reset the system after saving the changes.
Discard Changes and
Reset
Reset the system setup without saving any changes.
Restore Defaults
Restore the default values for all the setup options.
Appendix
EN-52
Appendix
Copyright
Copyright© 2018. All rights reserved.
No part of this user manual may be transmitted, stored in a retrieval system, or
translated into any language or computer language, in any form or by any
means, without the prior written permission of the manufacturer. Information is
subject to change without prior notice.
Regulatory Statement
Federal Communications Commission
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and shielded AC power cable must be employed
with this equipment to insure compliance with the pertinent RF emission limits
governing this device. Changes or modifications not expressly approved by the
system's manufacturer could void the user's authority to operate the equipment.
Appendix
EN-53
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
This device may not cause harmful interference
This device must accept any interference received, including interference
that may cause undesired operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be provided with
antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
SAR Value: 1.187W/kg
This device is operation in 5.15 5.25GHz frequency range, then restricted in
indoor use only, Outdoor operations in the 5150~5250MHz is prohibit.
This device is slave equipment, the device is not radar detection and not ad-hoc
operation in the DFS band.
Note: Do not disassemble the bumper. Otherwise, the antenna may be damaged,
resulting in poor reception.
Battery Disposal
THIS PRODUCT CONTAINS A LITHIUM-ION OR NICKEL-METAL HYDRIDE
BATTERY. IT MUST BE DISPOSED OF PROPERLY. CONTACT LOCAL
ENVIRONMENTAL AGENCIES FOR INFORMATION ON RECYCLING AND
DISPOSAL PLANS IN YOUR AREA.
WARNING EXPLOSION HAZARD
Class I, Division 2, Groups A, B, C, D, T Code T5
Class I, Zone 2, Groups IIC, T5
WARNING - EXPLOSION HAZARD. DO NOT CONNECT OR REMOVE WHEN IN
HAZARDOUS AREA. MAKE SURE ALL COVERS SECURED IN PLACE BEFORE USE.
AVERTISSEMENT RISQUE D’EXPLOSION. NE PAS CONNECTER OU RETIRER
DANS UNE ZONE DANGEREUSE. S’ASSURER QUE TOUS LES CAPOTS SONT
FIS EN PLACE AVANT UTILISATION.
Main Battery: J.S. Power CO., LTD, P/N: X11BK-M
Appendix
EN-54
CLASS 1 LASER PRODUCT
LASERSCHUTZKLASSE 1 PRODUKT TO EN60825
CAUTION
THIS APPLIANCE CONTAINS A LASER SYSTEM AND IS
CLASSIFIED AS A "CLASS 1 LASER PRODUCT.TO USE THIS
MODEL PROPERLY, READ THE INSTRUCTION MANUAL
CAREFULLY AND KEEP THIS MANUAL FOR FUTURE
REFERENCE. IN CASE OF ANY TROUBLE WITH THIS MODEL,
PLEASE CONTACT YOUR NEAREST "AUTHORIZED SERVICE
STATION.TO PREVENT DIRECT EXPOSURE TO THE LASER
BEAM, DO NOT TRY TO OPEN THIS ENCLOSURE.
PRODUIT LASER DE CLASSE 1
LASERSCHUTZKLASSE 1 PRODUKT TO EN60825
ATTENTION :
CE PRODUIT CONTIENT UN SYSME LASER ET EST CLAS
EN TANT QUE « PRODUIT LASER DE CLASSE 1 ». POUR
UTILISER CE MOLE CORRECTEMENT, LISEZ LE MANUEL
D’INSTRUCTIONS ATTENTIVEMENT ET CONSERVEZ-LE POUR
RENCE FUTURE. EN CAS DE PROBLÈMES AVEC CE
MOLE, VEUILLEZ CONTACTER VOTRE « STATION DE
SERVICE AUTORISÉE » LA PLUS PROCHE. POUR ÉVITER UNE
EXPOSITION DIRECTE AUX FAISCEAUX LASER, N’ESSAYEZ
PAS D’OUVRIR CE BTIER.
ANNEX IV
Symbol for the marking of electrical and electronic equipment
The symbol indicating separate collection for electrical and electronic equipment
consists of the crossed-out wheeled bin, as shown below. The symbol must be
printed visibly, legibly and indelibly.
Appendix
EN-55
CAUTION FOR ADAPTER
THE TABLET PC IS FOR USE WITH DEDICATED AC ADAPTER.
AVERTISSEMENT CONCERNANT L’ADAPTATEUR
LA TABLETTE DOIT ÊTRE UTILIE AVEC UN ADAPTATEUR SECTEUR CA DÉDIÉ.
BATTERY SAFETY
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE
MANUFACTURER. DISPOSE OF USED BATTERIES ACCORDING TO THE
MANUFACTURER'S INSTRUCTIONS.
CURI DES PILES
DANGER D’EXPLOSION SI LA PILE EST MAL REMPLACÉE.
REMPLACEZ LA PILE UNIQUEMENT PAR UNE AUTRE DU MÊME TYPE, OU D’UN
TYPE ÉQUIVALENT CONSEILLÉ PAR LE FABRICANT. REJETEZ LES PILES USÉES
CONFORMENT AUX INSTRUCTIONS DU FABRICANT.
CAUTION FOR RJ-45
The RJ-45 jack is not used for telephone line connection.
AVERTISSEMENT POUR RJ-45
N’utilisez pas la prise RJ-45 pour une connexion à la ligne téphonique.
Appendix
EN-56
Safety Instructions
These safety instructions should always be observed to ensure safe operation
when handling the device.
Do not place this device on an unstable table or surface. The device may fall,
causing serious damage to its housing and components.
Do not cover the device, or block the air ventilation holes of the device with
any other objects.
Do not use any sharp object to tap on the display screen.
Do not expose the device to direct sunlight and dusty environments.
Keep the device away from excessive heat and humidity.
Keep liquids away from the device.
Keep the device away from any magnetic emitting devices as this may affect
the quality of the wireless signal reception.
When using an AC adapter:
Place this device in a location that is close enough to an electrical
outlet to accommodate the length of the power cord and in order to
turn off the power conveniently.
Operate this device only with the type of power source indicated on the
device marking label.
Disconnect the AC adapter from the electrical outlet if the device is not
being used for an extended period of time.
When cleaning the device,
Be sure to turn off the device properly and unplug the AC adapter
before cleaning.
Wipe the device with a clean, dry cloth.
Do not use abrasive cleaners to clean the device.
Do not attempt to disassemble or repair this device. Doing so will void the
warranty.
Appendix
EN-57
Instructions de curité
Ces instructions de sécurité doivent toujours être suivies pour assurer le
fonctionnement r de l’appareil lors de sa manipulation.
Ne placez pas cet appareil sur une table ou surface instable. L’appareil
pourrait tomber et causer des ts sérieux à son boîtier et ses composants.
Ne couvrez pas l’appareil, et ne bloquez pas les trous de ventilation avec
d’autres objets.
N’utilisez pas d’objet pointu pour appuyer sur l’écran.
Ne placez pas lappareil dans des environnements directement exposés au
soleil ou poussreux.
Gardez l’appareil à l’écart de la chaleur et de l’humidité.
Gardez les liquides à l’écart de l’appareil.
Gardez l’appareil à l’écart des appareils émettant des ondes
électromagnétiques, car celles-ci peuvent affecter la réception du signal sans
fil.
Lors de l’utilisation d’un adaptateur secteur :
Placez l’appareil à un emplacement suffisamment proche d’une prise
électrique pour prendre en charge la longueur du cordon d’alimentation.
Utilisez uniquement cet appareil avec le type d’alimentation électrique
indiqué sur l’étiquette de l’appareil.
branchez l’adaptateur secteur de la prise électrique si vous ne
prévoyez pas d’utiliser l’appareil pendant une riode prolongée.
Lors du nettoyage de l’appareil,
Veillez à éteindre l’appareil correctement et à brancher l’adaptateur
secteur avant le nettoyage.
Essuyez l’appareil avec un chiffon propre et sec.
N’utilisez pas de produits nettoyants abrasifs pour nettoyer l’appareil.
Ne tentez pas de démonter ou réparer cet appareil. Ceci annulerait la garantie.

Navigation menu