Tyco Safety Canada 00NB919 WLS919-433 & PWLS919-433 WIRELESS KEY User Manual wls919 is en 29005248 r001 P65

Digital Security Controls Ltd. WLS919-433 & PWLS919-433 WIRELESS KEY wls919 is en 29005248 r001 P65

Operating instructions

WLS919Wireless KeyOPERATING INSTRUCTIONSThe WLS919 wireless key allows you to arm and disarm your alarm system,as well as perform other keypad functions, from a unit small enough tokeep in your pocket. Together with your installer, you can decide whichfunctions you wish to have accessible from your portable key.To activate any one of the four selected functions, press and hold theappropriate button for two seconds. The functions will be etched on eachbutton. These can be changed by the installer by placing labels on thebutton that needs to be changed.False Alarm PreventionThe WLS919 has a slide cover, used to cover 2 or all of the buttons, to prevent accidental activation. TheWLS919 is shipped with a red panic button ( ). The color difference will make this button easy to identify toensure the correct key is pressed in a panic situation. Signals will not be received if the key is not within the range of the wireless receiver.The default functions are as follows:Stay ArmingPress this button to arm your system in the Stay mode. All perimeter zones will be armed, such as allwindow and door contacts, but the interior zones will remain inactive, allowing you to stay on the premiseswithout setting off an alarm.Away ArmingPress this button to arm your system in the Away mode. Both the interior and exterior zones will be armed,allowing you to exit the premises.DisarmPress this button to disarm your system. You do not have to enter your access code when you use the keyto disarm the system.PanicPress this button to notify your central monitoring station of a situation requiring the police, such as a break-in.Other available functions (to be programmed by the installer):FirePress this button to notify your central monitoring station of a fire condition.AuxiliaryPress this button to notify your monitoring station of a non-medical emergency.Quick ExitPress this button to allow 2 minutes to exit the premises while the system is armed, without sounding the alarm.System TestPress this button to activate a system test. The alarm will sound for 2 seconds and a communication will besent to the central monitoring station, if programmed to do so.Please discuss all WLS919 options with your installer in order to program the best possiblecombination to suit your needs.©2000 Digital Security Controls Ltd.www.dsc.comPrinted in Canada 29005248 R001Testing the WLS919 KeyWhen any key is pressed on the WLS919 to perform a function, its battery status is sent to the receiver. Ifthe batteries are low, the Trouble light on your system’s keypads will turn ON. If this occurs, the key’sbatteries must be replaced. Do not use a Fire, Auxiliary or Panic key to test your WLS919 unit as pressing these buttons willalways notify your monitoring station of a non-medical emergency.Replacing the BatteriesThe WLS919 Wireless Key requires two lithium CR2032 batteries. To replace thebatteries, open the key’s plastic housing by inserting a flathead screwdriver alongthe side of the unit and carefully twist the screwdriver to separate the top andbottom plastic. Once separated the batteries will be visible, simply remove the oldbatteries and insert the new ones.The polarity of the batteries must be observed, as shown in the diagram above.FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:■Re-orient the receiving antenna.■Increase the separation between the equipment and receiver.■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.■Consult the dealer or an experienced radio/television technician for help.The user may find the following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This booklet is available fromthe U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that may cause undesired operation of the device.Ce dispositif satisfait aux exigences d’Industrie Canada, prescrites dans le document CNR-210. son utilisation est autorisée seulement aux conditions suivantes: (1) il ne doitpas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettrele fonctionnement du dispositif.LIMITED WARRANTYDigital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall be free of defect in materials andworkmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair or replace thedefective equipment upon return of the equipment to its repair depot. This warranty applies only to defects in parts and workmanship and not to damageincurred in shipping or handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such as lightning, excessive voltage,mechanical shock, water damage, or damage arising out of abuse, alteration or improper application of the equipment.The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether expressed or implied andof all other obligations or liabilities on the part of Digital Security Controls Ltd. This warranty contains the entire warranty. Digital Security Controls Ltd.neither assumes, nor authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warrantyor liability concerning this product.In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or consequential damages, loss of anticipated profits, loss of time or any otherlosses incurred by the buyer in connection with the purchase, installation or operation or failure of this product.WARNING: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis. However, despite frequenttesting, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for this product to fail to perform as expected.++Available Model: WLS919-433
WLS919Wireless KeyOPERATING INSTRUCTIONSThe WLS919 wireless key allows you to arm and disarm your alarm system,as well as perform other keypad functions, from a unit small enough tokeep in your pocket. Together with your installer, you can decide whichfunctions you wish to have accessible from your portable key.To activate any one of the four selected functions, press and hold theappropriate button for two seconds. The functions will be etched on eachbutton. These can be changed by the installer by placing labels on thebutton that needs to be changed.False Alarm PreventionThe WLS919 has a slide cover, used to cover 2 or all of the buttons, to prevent accidental activation. TheWLS919 is shipped with a red panic button ( ). The color difference will make this button easy to identify toensure the correct key is pressed in a panic situation. Signals will not be received if the key is not within the range of the wireless receiver.The default functions are as follows:Stay ArmingPress this button to arm your system in the Stay mode. All perimeter zones will be armed, such as allwindow and door contacts, but the interior zones will remain inactive, allowing you to stay on the premiseswithout setting off an alarm.Away ArmingPress this button to arm your system in the Away mode. Both the interior and exterior zones will be armed,allowing you to exit the premises.DisarmPress this button to disarm your system. You do not have to enter your access code when you use the keyto disarm the system.PanicPress this button to notify your central monitoring station of a situation requiring the police, such as a break-in.Other available functions (to be programmed by the installer):FirePress this button to notify your central monitoring station of a fire condition.AuxiliaryPress this button to notify your monitoring station of a non-medical emergency.Quick ExitPress this button to allow 2 minutes to exit the premises while the system is armed, without sounding the alarm.System TestPress this button to activate a system test. The alarm will sound for 2 seconds and a communication will besent to the central monitoring station, if programmed to do so.Please discuss all WLS919 options with your installer in order to program the best possiblecombination to suit your needs.©2000 Digital Security Controls Ltd.www.dsc.comPrinted in Canada 29005248 R001Testing the WLS919 KeyWhen any key is pressed on the WLS919 to perform a function, its battery status is sent to the receiver. Ifthe batteries are low, the Trouble light on your system’s keypads will turn ON. If this occurs, the key’sbatteries must be replaced. Do not use a Fire, Auxiliary or Panic key to test your WLS919 unit as pressing these buttons willalways notify your monitoring station of a non-medical emergency.Replacing the BatteriesThe WLS919 Wireless Key requires two lithium CR2032 batteries. To replace thebatteries, open the key’s plastic housing by inserting a flathead screwdriver alongthe side of the unit and carefully twist the screwdriver to separate the top andbottom plastic. Once separated the batteries will be visible, simply remove the oldbatteries and insert the new ones.The polarity of the batteries must be observed, as shown in the diagram above.FCC COMPLIANCE STATEMENTCAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one or more of the following measures:■Re-orient the receiving antenna.■Increase the separation between the equipment and receiver.■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.■Consult the dealer or an experienced radio/television technician for help.The user may find the following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This booklet is available fromthe U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4.Digital Security Controls Ltd. 160 Washburn St., Lockport, NY 14094This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this devicemust accept any interference, including interference that may cause undesired operation of the device.Ce dispositif satisfait aux exigences d’Industrie Canada, prescrites dans le document CNR-210. son utilisation est autorisée seulement aux conditions suivantes: (1) il ne doitpas produire de brouillage et (2) l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettrele fonctionnement du dispositif.LIMITED WARRANTYDigital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the product shall be free of defect in materials andworkmanship under normal use and that in fulfilment of any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair or replace thedefective equipment upon return of the equipment to its repair depot. This warranty applies only to defects in parts and workmanship and not to damageincurred in shipping or handling, or damage due to causes beyond the control of Digital Security Controls Ltd. such as lightning, excessive voltage,mechanical shock, water damage, or damage arising out of abuse, alteration or improper application of the equipment.The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all other warranties, whether expressed or implied andof all other obligations or liabilities on the part of Digital Security Controls Ltd. This warranty contains the entire warranty. Digital Security Controls Ltd.neither assumes, nor authorizes any other person purporting to act on its behalf to modify or to change this warranty, nor to assume for it any other warrantyor liability concerning this product.In no event shall Digital Security Controls Ltd. be liable for any direct, indirect or consequential damages, loss of anticipated profits, loss of time or any otherlosses incurred by the buyer in connection with the purchase, installation or operation or failure of this product.WARNING: Digital Security Controls Ltd. recommends that the entire system be completely tested on a regular basis. However, despite frequenttesting, and due to, but not limited to, criminal tampering or electrical disruption, it is possible for this product to fail to perform as expected.++Available Model: WLS919-433

Navigation menu