Tyco Safety Sensormatic AMB44 WIRELESS LR-WPAN IN 2.4 GHz BAND USING DIGITAL SS. User Manual User Guide

Download:
Mirror Download [FCC.gov]
Document ID	2159682
Application ID	PGbTLVcA4H6E72x0bmR+BA==
Document Description	User Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.93kB (349078 bits)
Date Submitted	2014-01-07 00:00:00
Date Available	2014-01-07 00:00:00
Creation Date	2017-10-24 09:38:01
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-24 09:38:01
Document Title	ZBAMB2070 Mobile Handheld Deactivator User Guide 8200-0958-05
Document Creator	Acrobat PDFMaker 10.1 for Word
Document Author:	Mike Rosenblum

Safety
ZBAMB2070
Mobile Handheld
Deactivator
WARNING:
• No serviceable parts! Opening
the deactivator may expose
you to electric shock! If the
deactivator appears defective,
have your loss prevention
manager or IT specialist return
it to the distributor.
For use with a Motorola MT2070
handheld barcode scanner
User Guide
The ZBAMB2070 Mobile Handheld
Deactivator combines a Motorola MT2070
barcode scanner with a rechargeable
battery-operated deactivator coil.
• Never use a damaged
deactivator.
WARNING:
This guide covers:
• Using the device
• Charging the battery
• Replacing the battery.
Motorola MT2070
Handheld Scanner
ZBAMB2070 EAS Deactivator
Module Assembly (dark
shaded parts)
• The deactivator is not to be
used for scanning a person.
Always keep a distance of at
least 35cm (14in) between the
deactivation coil and another
person. Refer to the Safety
Notice on page 5.
• Ensure safety instructions
within this manual are observed
during the installation and/or
operation of the deactivator.
• For proper charging, rest the
deactivator in the Motorola
Base Charging Station exactly
as shown in the image. Resting
the deactivator any other way
will affect its operation.
Motorola MT2070
Base Charging Station
If you need assistance...
Contact your Sales Representative.
© 2013 Sensormatic Electronics, LLC
ZBAMB2070 MOBILE HANDHELD DEACTIVATOR
INSTALLATION AND USER GUIDE
8200-0958-05, REV. A
1 of 5
3. Swirl the deactivator coil in 2.54cm
(1in) circles no more than 11.4cm
(4.5in) from the barcode. Observe
deactivation indications.
Using the Device
1. Remove the scanner/deactivator
from the Motorola Base Charging
Station.
2. Aim the scanner at the barcode and:
a) Pull the trigger. The scanner will
beep indicating a successful
scan.
IIIIIIIIIIIIIIIIIIIII
b) Release the trigger; the LEDs on
the deactivator will flash yellow
for 3 seconds. Within this
window, perform step 3.
Deactivation Indications
(If you were unable to perform
step 3 within this window, repeat
step 2.)
IIIIIIIIIIIIIIIIIIIII
LEDs / Audio
Indicates
Green flash +
1 beep
Deactivation successful
Red flash +
3 beeps
Deactivation failed
4. When finished, seat the
scanner/deactivator firmly into the
Motorola Base Charging Station to
maintain the battery charge.
Fault Indications
ZBAMB2070 MOBILE HANDHELD DEACTIVATOR
INSTALLATION AND USER GUIDE
LEDs / Audio
Indicates
Flashing red
and yellow
Replace the battery.
Red flash +
beep every
500ms until 30
seconds has
elapsed
Deactivator is out of
range of the Sync AP
device.
Solid red
Replace the
deactivator.
8200-0958-05, REV. A
2 of 5
Battery Charging Indicators
Charging the Battery
The handheld deactivator has a
rechargeable battery. LEDs on the
deactivator will flash green when the
battery is charging or red if the battery
charge is low.
Both LEDs
Indicate
Flashing
green
Charging
Solid green
Fully charged
IMPORTANT! To maintain the battery
charge, rest the deactivator in the
Motorola Base Charging Station exactly as
shown below when not in use.
Off
Deactivator is removed
from base
If Battery Charge is Low
To replace the battery, see “Replacing the
Battery” on page 4.
ZBAMB2070 MOBILE HANDHELD DEACTIVATOR
INSTALLATION AND USER GUIDE
LEDs
Remaining Flash Red
Battery Life Every…
Beeps
Above 30%
—
—
30%
120 seconds
20%
60 seconds
15%
30 seconds
10%
15 seconds
8200-0958-05, REV. A
3 of 5
2. Remove the battery and disconnect it.
Replacing the Battery
To replace the battery, see your loss
prevention manager or IT specialist.
WARNING: Risk of explosion if
the battery is replaced with an
incorrect size and type.
WARNING: Recycle or dispose
used batteries according to local
or state requirements.
DO NOT mutilate the battery or
expose it to flame.
Before recycling or disposing,
insulate exposed battery wires
with electrical tape.
1. Remove the screw and battery cover
from the bottom of the deactivator.
3. Plug in the new battery, bend wires as
shown, and seat it in the battery
compartment. Install the battery cover
and secure it with the screw. DO NOT
over tighten.
Bend wires
as shown.
ZBAMB2070 MOBILE HANDHELD DEACTIVATOR
INSTALLATION AND USER GUIDE
Bar code
label must
be face up.
8200-0958-05, REV. A
4 of 5
Declarations
Other Declarations
WARRANTY DISCLAIMER: Sensormatic Electronics, LLC
makes no representation or warranty with respect to the
contents hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular
purpose. Further, Sensormatic Electronics, LLC reserves the
right to revise this publication and make changes from time to
time in the content hereof without obligation of Sensormatic
Electronics, LLC to notify any person of such revision or
changes.
Regulatory Information
FCC ID: BVCAMB44
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures: reorient or relocate the receiving antenna, increase
the separation between the equipment and receiver, connect
the equipment into an outlet on a circuit different from that to
which the receiver is connected, and/or consult the dealer or an
experienced radio/TV technician for help.
LIMITED RIGHTS NOTICE: For units of the Department of
Defense, all documentation and manuals were developed at
private expense and no part of it was developed using
Government Funds. The restrictions governing the use and
disclosure of technical data marked with this legend are set
forth in the definition of “limited rights” in paragraph (a) (15) of
the clause of DFARS 252.227.7013. Unpublished - rights
reserved under the Copyright Laws of the United States.
TRADEMARK NOTICE: Sensormatic is a trademark or
registered trademark of Sensormatic Electronics, LLC. Motorola
and the Stylized M Logo are registered trademarks of Motorola
Trademark Holdings, LLC. Other product names mentioned
herein may be trademarks or registered trademarks of
Sensormatic or other companies.
IC ID: 3506A-AMB44
No part of this guide may be reproduced in any form without
written permission from Sensormatic Electronics, LLC.
MODELS: ZBAMB2070
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may
cause undesired operation of the device.
Safety Notice
This product emits electromagnetic fields and is for
use by trained workers in an occupational
environment ONLY. It is not to be operated against
the worker body. The minimum safety distance to
the human torso of the general public or untrained
workers is 35cm (14 inches) when the product is
operating. At distances beyond 35 cm (14 inches)
the electromagnetic fields are below (better than)
the safe levels for the general public and untrained
workers given in European Council
Recommendation 1999/519/EC.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes : (1)
l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.
This Class B digital apparatus complies with Canadian ICES003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
EMC........................................................ 47 CFR, Part 15
ICES-003
RSS-Gen
RSS-210
The product is in compliance with European
Directive 1999/5/EC on radio equipment and
telecommunications terminal equipment on the
basis of the above statement, using
EN50364:2009.
Safety ................................. UL 60950-1 (second edition)
CSA C22.2.60950-1
EN 60950-1
Environmental rating ................................................. IP54
ZBAMB2070 MOBILE HANDHELD DEACTIVATOR
INSTALLATION AND USER GUIDE
8200-0958-05, REV. A
5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Annotate, Fill forms, Extract, Print high-res
Author                          : Mike Rosenblum
Create Date                     : 2013:12:16 10:22:34-05:00
Modify Date                     : 2013:12:16 10:23:54-05:00
Subject                         : Mobile Deactivation
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2013:12:16 10:23:54-05:00
Creator Tool                    : Acrobat PDFMaker 10.1 for Word
Document ID                     : uuid:b004359d-5d53-4a2e-88a5-f6168c4ebf9d
Instance ID                     : uuid:402cacdb-4134-4edf-8acc-a25a79b2e464
Format                          : application/pdf
Title                           : ZBAMB2070 Mobile Handheld Deactivator User Guide 8200-0958-05
Description                     : Mobile Deactivation
Creator                         : Mike Rosenblum
Producer                        : Adobe PDF Library 10.0
Source Modified                 : D:20131216152227
Company                         : Sensormatic Electronics, LLC
Comments                        : ***PUT NEW ENTRIES FIRST***
Category                        : Deactivator
Headline                        : Mobile Deactivation
Page Layout                     : OneColumn
Page Count                      : 5

EXIF Metadata provided by EXIF.tools