Typo Innovations TK2001 Typo for iPad Air User Manual

Typo Innovations, LLC Typo for iPad Air

User Manual.pdf

Welcome.Thank you for purchasing TYPO for iPad Air, the keys to faster typing.For short video tutorials on the TYPO for iPad Air, including instructions and feature demonstrations please visit typokeyboards.comSincerely,-Your Friends at TYPO
Inserting/Removing your iPad:Powering on and off:When inserting the iPad into the TYPO for iPad Air, line up the camera hole on the case with the iPad camera, placing the edge of the iPad in the case camera first and then apply pressure on the opposite sides to snap the iPad into the case.To remove the iPad from the TYPO for iPad Air, press firmly on the edges of the hinge while simultaneously pressing the back of the case.To power on your TYPO for iPad Air, flip the on/off switch on the keyboard (bottom right corner) towards the green dot. The LEDs on the keyboard will illuminate briefly while the keyboard powers on. To power off your TYPO for iPad Air, flip the on/off switch away from the green dot.
Pairing your TYPO for iPad Air:LED indicator Bluetooth Pairing ButtonLocated on side of keyboard Pairing your TYPO for iPad Air is easy, and once paired the connection between your iPad and TYPO for iPad Air should never be lost.1.  On your iPad select: SETTINGS>BLUETOOTH>ON2.  Press and hold the Bluetooth button for three seconds and the middle LED will flash until your TYPO and iPad are paired.3.  Your iPad will display “Typo Keyboard” as an available device. Select this option to complete pairing.
Charging:Your new TYPO for iPad Air Features a powerful battery that lasts up to 1 year of normal use between charges. It comes with a charging cable you can use to charge your keyboard quickly and conveniently. To charge your TYPO for iPad Air, follow these steps:1.  Plug the Micro USB connector into the charging port.2.  Plug the regular USB connector into any USB outlet.3.  The white LEDs at the at the top of the keyboard will illuminate to indicate your TYPO is charging. One LED indicates 33% charge, two LEDs indicate 50% charge, and a all three LEDs indicate a full charge.4.  Remove the Micro USB connector and enjoy your TYPO! It usually takes 2-4 hours to completely charge your TYPO.
Battery Life:To check the TYPO for iPad Air’s remaining battery power press the Fn + Battery keys. The LED indicator will flash one of three ways:1.  One LED indicates 33% charge.2.  Two LEDs indicates 50% charge.3.  Three solid LEDs indicate 100% battery.When your TYPO for iPad Air reaches critical battery level, all three LEDs will flash every 5 minutes.To help preserve battery life, your TYPO will enter sleep mode if left on and not used for several minutes. To awaken your TYPO, press any key. The TYPO’s battery has no memory and may be charged whenever you wish.
Special Function Keys:HOME: Displays your iPad’s home screenSPOTLIGHT: Opens your iPad’s searchCONTACTS: Launches your contacts*CALENDAR: Launches your calendar*BATTERY INDICATORSIRIPREVIOUS TRACK: Skips to previous track on playlistPLAY/PAUSE: Starts or pauses current playlistNEXT TRACK: Skips to next track on playlistMUTE: Mutes your iPad’s audioVOLUME DOWN: Decreases your iPad’s volumeVOLUME UP: Increases your iPad’s volumeWORLD SYMBOL: Toggles between TYPO keyboards*KEYBOARD HIDE/SHOW: Hides/shows on-screen keyboardFN+LEFT ARROW: Selects the word to the leftFN+RIGHT ARROW: Selects the word to the rightFN+DOWN ARROW: Selects allCAPS LOCK: Activates Caps lock. When Caps Lock is on a white indicator light will turn on. To turn Caps Lock off press the key again.Your TYPO for iPad Air has been designed with the following function keys to give you more control of your iPad:*Requires TYPO Keyboard app
Troubleshooting:If your iPad does not respond to your TYPO there may be a simple explanation such as a dead battery or an unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, then please contact TYPO Customer Service and one of our trained professionals will be happy to assist you.1.  Restart your iPad by holding the home and power button until the Apple® logo appears on screen.2.  Turn your TYPO off and back on. You should see the LED illuminate briefly, if not, charge your TYPO.3.  After charging, turn your TYPO on. If the LEDs do not illuminate, and your keyboard doesn’t operate correctly, please contact TYPO Customer Service.4.  If your TYPO cannot establish or maintain a Bluetooth® connection, reset the Bluetooth module by charging your keyboard.5.  Forget and re-pair your TYPO. On your iPad, select: SETTINGS>BLUETOOTH>ON. If you see “Typo Keyboard” listed as an available device, touch the arrow to the right of it and choose to have your iPad forget the device. Push the Bluetooth button on your TYPO and watch for the LED to flash. Your iPad should display “Typo Keyboard” as an available device; select it. If your iPad gives you and error message, repeat the pairing process.
For more help please see our FAQ section at: www.typokeyboards.com To reach a trained customer service representative, please use one of the following: typokeyboards.com | info@typokeyboards.com ©2015 Typo Innovations, LLC  All Rights Reserved. PATENT PENDING | MADE IN CHINA iPad®, iPad Air™ and Apple® are trademarks or registered trademarks of Apple, Inc. Bluetooth® is a trademark of Bluetooth SIG, Inc. Typo for iPad Air are trademarks or registered trademarks of Typo Innovations, LLC. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •  Reorient or relocate the receiving antenna. •  Increase the separation between the equipment and receiver. •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •  Consult the dealer or an experienced radio/TV technician for help
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Radiation Exposure Statement:The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Industry Canada statement:This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.Radiation Exposure Statement:The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.Declaration d'exposition aux radiations:Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada etablies pour un environnement non controle.Le produit est sur pour un fonctionnement tel que decrit dans ce manuel. La reduction aux expositions RF peut etre augmentee si l'appareil peut etre conserve aussi loin que possible du corps de l'utilisateur ou que le dispositif est regle sur la puissance de sortie la plus faible si une telle fonction est disponible.”

Navigation menu