UBTECH ROBOTICS YANSHEE Yanshee User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3954870
Application ID	9lM6HTFoaJi20WF9tXdLfQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	377.02kB (4712726 bits)
Date Submitted	2018-08-07 00:00:00
Date Available	2018-08-07 00:00:00
Creation Date	2018-07-18 09:48:49
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-08-06 16:13:10
Document Title	1.4.1.02.0073 Yanshee说明书-英文版_V1.0_20180625（无ETL LOGO）low res
Document Creator	Adobe Illustrator CC 2017 (Windows)

User Manual
Precautions!
1. Keep the robot away from fire, keep it dry and clean.
2. Do not squeeze the robot with too much force during use.
3. Please use the robot on a flat surface.
4. Please keep yourself at an appropriate distance from the
robot to avoid any injuries when the robot is in operation.
5. Do not bend its joints forcibly as to avoid hand injuries
and damage to the robot when the robot is in operation.
6. Please use the supplied charger to charge the robot.
7. The robot servos for joints are precisely designed and
should not be disassembled without authorization.
Contact us if necessary.
8. When an abnormality occurs during debugging, press the
Emergency Stop button and cut off the power
immediately to avoid hand injuries and damage to the
robot.
9. Take necessary preventive measures when use the robot.
Do not use it at heights or near any edges as it may fall
and result in damage.
10. It is best to use the robot for no longer than 1 hour each
time, which will extend the service life of the servo
actuators.
11. The robot is not intended for children under 14 years old.
12. You will be notified with software updates if there is any.
The latest update instruction shall prevail for some
features.
13. Man-made damage is not covered by our warranty policy.
14. Please contact our customer center for technical support
and repairing service.
Cut off the power and contact us when:
a. The robot smokes or you smell something burning; or
b. Water or any other matter enters the robot; or
c. The robot is damaged.
The User Manual contains important information. Please
keep it for future reference!
Warning:
An "Emergency Stop" button is on the top of the robot.
You can press this button to cut off the power and stop its
operation immediately at any time!
Emergency
Stop button
01. Packing List
User Manual
User Data Set*1
(Quick Start Guide*1,
Warranty Card*1)
Yanshee Robot components: 1
Quick Start Guide: 1
Warranty card: 1
Battery: 1
Power adapter: 1
Power cord: 1
Spare parts kit: 1 (wires, screws)
Screwdriver: 1
Charging dock: 1
Yanshee Robot
02. Appearance
Emergency
Stop button
Camera
Camera
indicator
HDMI port
MIC indicator
MIC port
On/Off button
USB port
GPIO
extended port
Sensor port
Front view of Yanshee
02. Appearance
Speaker
Power Indicator
Charge port
Back view of Yanshee
Introduction to GPIO Extended Port
GPIO Pinout Diagram
Function
Physical
Pin No.
Function
Yanshee Robot
Note:
Ports 3, 5, 12, 35, 38 and 40 are used, of which ports 3 and 5 are for I2C
communication and ports 12, 35, 38 and 40 are for audio I2S signaling.
03. Specifications
Appearance
Construction
Humanoid
Color
Silver
Dimensions
370*192*106 (mm)
Weight
≈2.05 kg
Material
Aluminum alloy structure,
PC+ABS housing
Servo Actuators
17 degrees of freedom (DOF)
Electrical Specifications
Operating voltage
DC 9.6V
Power
4.5W~38.4W
Operating
temperature
0℃ to 40℃
Power adapter
Input: 100V~240V, 50/60Hz 1A
Output: 9.6V, 4A
Master Chip and Memory
Processor
STM32F103RDT6
Broadcom BCM2837 1.2GHz 64-bit
quad-core ARMv8 Cortex-A53
RAM
1GB
Memory
16GB
Operating system
Raspbian
Network
Wi-Fi
Supports Wi-Fi2.4G
802.11b/g/n fast connect
Bluetooth
Bluetooth 4.1
Battery capacity
2750mAh
Vision System
Camera
8 mega-pixel camera, fixed focus
Light
Eyes: 3-color LED lights *2
Chest: 3-color LED notification lights *3
Microphone: green indicator *1
Charge: dual-color indicator *1
Audio
Microphone
Single
Speaker
Stereo speakers *2
Sensors
Built-in sensor
9-axle motion tracking sensor *1
Motherboard temperature sensor *1
Extended port
POGO 4PIN *6
Debugging Port
HDMI
GPIO
40 (6 of them are used)
USB
Others
Keys
ON/OFF key on the chest;
Emergency Stop key on the top
Control Mode
Mobile software (APP); voice control
04. Download and Sign in to Mobile Software (APP)
Download the APP:
Method 1: Scan the QR code below to enter the APP
download page where you can click to download the
Yanshee APP;
APP Download QR Code
Yanshee
Method 2: Search and download "Yanshee" in APP
Store/Google Play/MyAPP or other platforms.
Method 3: Log onto www.ubtrobot.com to search for your
desired product and download the APP.
Sign in:
After installing the APP, run the APP and sign in according to
the instruction. If you are a registered user, log into the APP
directly.
05. Assemble the Robot
Open and log into the APP. Select the assembly tutorial to
learn about how to assemble or disassemble the robot from
the menu bar.
Select the disassembly tutorial to learn about how to
disassemble the robot.
06. Install and Charge the Battery
Install the Battery
• The battery compartment is below the left arm of the robot.
Rotate the battery cover clockwise 90° to unlock it.
• Install the battery into the battery cover and then reinstall
the battery cover. Rotate the battery cover
counter-clockwise 90° to lock it.
Charge the Battery
Method 1: After installing the battery, connect the power cord
to the charge port on the back of the robot to charge the
battery.
Method 2: Place the battery onto the dock charger, and then
connect the power cord to the charge port of the dock
charger to charge the battery.
07. Start the Robot and Set up the Network
• Press and hold the button on the chest for 2-3 seconds and
release until the indicator is lit up in blue. The robot is
booted up after you hear a boot-up sound.
• Make sure that both the Bluetooth and Wi-Fi are enabled
on the smart devices. Open and log into the Yanshee APP,
and click the icon on the upper left of the home screen to
connect the robot and set up the network.
• Refresh and search devices detected by the system, and
select the device to be connected according to the last 4
digits of the MAC address value on the label attached onto
the back of the robot.
• After the desired device is selected, the APP will select
the SSID identical to the local Wi-Fi to be displayed on the
page. Enter the correct Wi-Fi password and click the
"Join" button, the robot will set up and connect to the
network and also give you a voice prompt, saying
"Connecting".
Note:
You will hear a voice prompt saying "Connected" after
successful connection.
If the connection fails, you will hear a voice prompt saying,
"Connection Failed". In this case, please set up the network
again.
You do not have to set up the network again for later use,
just directly select the desired device from the list.
After setting up the network, you can use the APP to control
the robot and learn more information.
08. Use of Mobile APP
The mobile APP has a built-in graphic user interface and
integrates features including motion tracking, FPV, Blockly
visual programming, action readback programming,
curriculums, BBS and real-time sensor data view.
Fall-over Management
This feature is off by default. You can enable the feature via
the APP. The robot can pick itself up if it falls over when
enabled.
Language Switching
Both Simplified Chinese and English are supported so far. Go
to your APP to select the desired language for the robot.
09. Built-in Smart Applications
Raspbian OS issued by Raspberry Pi is used as the robot
software. This open source software comes with the
following features:
Speech Recognition
The robot is configured with speech recognition and
semantic recognition for Chinese, allowing you to chat with
it.
You can chat with it after you hear a "tinkling" sound by
pressing the button on the chest after start the robot.
UBTECH provides the Open SDK API, which enables you to
configure your own English speech recognition functions
with third-party voice platforms.
Note: please abide by relevant laws when using the
third-party voice platform.
Visual Processing
The robot is configured with face analysis, face tracking and
other features. You can call these functions through the
programming tools in the APP or Raspberry Pi system.
UBTECH provides the Open SDK API, which enables you to
configure your own visual identification functions with
third-party visual identification platforms.
Note: please abide by relevant laws when using the
third-party voice platform.
Auto Update:
After the robot is connected to the Internet, the built-in
platform software will automatically detect whether you
have the latest version and execute the update process.
Do not cut off the power or disconnect from the Internet
while updating.
10. Open Source Platform
The Yanshee robot is built on the Raspberry Pi open source
platform and open SDK files are provided, allowing a user to
configure, learn or develop smart Applications as desired, and
also allowing developers to create their own robot.
(1). Use an HDMI cable to connect the Yanshee robot to a
monitor.
(2). Use the USB port on the Yanshee to connect a USB,
keyboard and mouse.
(3). You can log onto the Linux system from Raspberry Pi by
simply starting the robot.
(4). SDK API and Demo codes are available from the
following link
https://github.com/UBTEDU/Yanshee-Raspi-SDK.
(5). For developers, please visit https://www.raspberrypi.org
to learn more information about Raspberry Pi.
11. Example of Use
Example of Correct Use:
Correct operation:
Hold the back of the
robot firmly and pick
up the robot.
On/Off
First hold up the back
of the robot firmly and
then press the ON/OFF
button on the chest.
Warning of Improper Use:
Do not use the robot
while charging
Do not place the robot
near any edges
Do not place the robot
on an inclined surface
Do not forcibly bend
the robot head
Do not forcibly bend
the robot joints
Do not forcibly bend
the robot joints
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
FCC Caution:
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance
20cm between the radiator & your body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Ages: 14+
FCC ID: 2AHJX-YANSHEE
UBTECH ROBOTICS CORP
Add: 16th & 22nd Floor, Block C1, Nanshan i Park, No. 1001 Xueyuan Road,
Nanshan District, Shenzhen City, China P.R.
Tel: 800-276-6137
www.ubtrobot.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Format                          : application/pdf
Title                           : 1.4.1.02.0073 Yanshee说明书-英文版_V1.0_20180625（无ETL LOGO）low res
Metadata Date                   : 2018:08:06 16:13:10+08:00
Modify Date                     : 2018:08:06 16:13:10+08:00
Create Date                     : 2018:07:18 09:48:49+09:00
Creator Tool                    : Adobe Illustrator CC 2017 (Windows)
Thumbnail Width                 : 192
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 18940 bytes, use -b option to extract)
Instance ID                     : uuid:7ddd0038-d96d-45ee-b93f-cf9c6168b161
Document ID                     : xmp.did:799e8810-cb60-cb4f-a5a0-0146ab676cec
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:7998d69a-d208-4b58-8d96-30e57470c41f
Derived From Document ID        : xmp.did:580a404d-d059-fd40-af58-4edfe850a782
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : default
History Action                  : saved, saved
History Instance ID             : xmp.iid:7b65bd7e-876c-3e40-a621-5fd5c66dcddc, xmp.iid:799e8810-cb60-cb4f-a5a0-0146ab676cec
History When                    : 2018:01:03 10:14:28+08:00, 2018:07:18 09:48:31+08:00
History Software Agent          : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2017 (Windows)
History Changed                 : /, /
Manifest Link Form              : EmbedByReference
Manifest Reference File Path    : E:\2017.4\Alpha 1X\说明书\Catch(11-30-15-55-50).jpg
Ingredients File Path           : E:\2017.4\Alpha 1X\说明书\Catch(11-30-15-55-50).jpg
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 94.999531
Max Page Size H                 : 129.998611
Max Page Size Unit              : Millimeters
Font Name                       : GothamBold, GothamBook
Font Family                     : GothamBold, GothamBook
Font Face                       : Regular, Regular
Font Type                       : Open Type, Open Type
Font Version                    : 001.000, 001.000
Font Composite                  : False, False
Font File Name                  : GothamBold.otf, GothamBook.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Producer                        : Adobe PDF library 15.00
Creator Version                 : 21.0.0
Page Count                      : 26
Creator                         : Adobe Illustrator CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools