UCLOUDLINK NETWORK TECHNOLOGY E1 4G Free Roaming Hotspot User Manual E1 User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3030468
Application ID	Q7iugBVLRqSTRcHxi47QBw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	43.23kB (540335 bits)
Date Submitted	2016-06-16 00:00:00
Date Available	2016-06-16 00:00:00
Creation Date	2016-05-13 18:55:38
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-06-12 11:46:39
Document Title	Microsoft Word - E1?User?Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

HONGKONG UCLOUDLINK NETWORK
TECHNOLOGY LIMITED
4G Free Roaming Hotspot
E1
4G High Speed Internet
E1 connects to the 4G or 3G local network automatically. It will switch to the best and the
most stable network. This device only used for data communication without voice.
We are all connected
E1 supports up to 5 devices simultaneously. This allows all your Wi-Fi enabled devices
like smartphones, tablets and laptop computers assessing Internet at the same time.
Safe personal Wi-Fi
There is zero hacking and as well no surveillance. Use the private network service to
ensure online protection when accessing the Internet.
Power Bank
With the maximum capacity of 6000 mAh, GlocalMe acts as a power bank which
provides you with the extra convenience of charging your mobile phone .
1. Product Overview
1. Wi‐Fi LED Indicator
2. Signal LED Indicator
3. Battery LED Indicator
4. Strength LED Indicator
5. Micro USB (Input)
6. Handle position for opening front panel
7. Power button
8. Reset button
LED Indicator Type
Wi‐Fi LED Indicator
Signal LED Indicator
Battery LED Indicator
Status
Remarks
On
Ready for internet connection
Off
No internet connection
Flashing
Service connecting
On
The signal strength is shown by strength LED indicator (4)
Flashing
Service abnormal
On
The battery capacity is shown by strength LED indicator (4)
Flashing
In charging
2、 Function Introduction：
1. Power on：Press power button for 3 seconds
2. Power off：Press power button for 5 seconds
3. Reset：Press power button for 18 seconds
4. Restore Factory Settings：Press reset button for 5 seconds
5. Battery Capacity and Signal Strength：Press the power button, the battery capacity will be
shown in the first 3 seconds, and then the signal strength will be shown afterwards.
3、Local SIM：
Both Macro SIM and Micro SIM are supported by E1.
Macro SIM——SIM slot 1
Micro SIM——SIM slot 2
The front panel can be opened as shown in Figure 3.
Please power off first if you want to insert/pull out the SIM card。
4、Product Introduction
Brand：GlocalMe
Model：E1
Box Content: Device; User Manual: Micro USB cable
Technical Specification：
• LTE FDD: Band 1/2/3/4/5/7/8/17/20
• LTE TDD: Band 38/39/40/41
• WCDMA: Band 1/2/4/5/8
• GSM: 1900/1800/900/850 MHz
• CDMA/EVDO:BC0 BC1
• Max Upload speed:50Mbps
• Max Download speed: 150Mbps
• Wi‐Fi: IEEE802.11b/g/n
• Micro USB
• Battery capacity: 3500mAh
• Power Input: DC 5V 1A
5、Quick Start Guide
1. Register an Account：Scan the QR code below to download the GlocalMe App. Register an
account after installation。
2. Activate Device：Using the GlocalMe App to scan the QR code on the back panel of the device.
3. Purchase Package：Purchase package or top up through GlocalMe App.
4. Power On：Press power button for 3 seconds.
5. Connect to GlocalMe：When the Wi‐Fi LED indicator " " is permanently on, turn on Wi‐Fi on
cell phone, select GlocalMe Wi‐Fi, input the password to connect to the internet （Wi‐Fi name
and password can be seen on the back panel, as shown below）.
6. Device Management：Input ‘192.168.43.1’ in the address bar of web browser, and input the
username and password to login (The initial username and password are shown above).
6、FAQ
1. How long does it take to fully charge the E1?
Approximately 7.5 hours.
2. How long can it work continuously?
Approximately 12 hours once fully charged.
3. How can I change my Wi‐Fi name and password?
Once connected, input ‘192.168.43.1’ in the address bar of web browser, input the new SSID
(Wi‐Fi name) and password.
4. What should I do if my device is lost or stolen?
De‐activate the device through GlocalMe App to prevent the use of your device.
5. How many connections can it support at the same time?
Up to 5 connections is supported by E1 at the same time.
6. How long does it take to connect to the internet once powered on?
It depends on the local network condition, normally it will take 1~2 minutes. For the first use
in one country, it may take up to 10 minutes.
7. What may be the cause if all the LEDs are off when pressing the power button?
It may be caused by low battery, please charge first.
8. What should I do if it stops responding?
Press the power button for 30 seconds.
9. What should I do if the local SIM doesn’t work?
Manually input the APN of the SIM card (login to 192.168.43.1, go to ‘Settings’ ‐> ‘APN
settings’, manually input the APN info of your SIM card and Save.)
For more info, please visit www.glocalme.com
Warning
Specific Absorption Rate (SAR) information.SAR tests are conducted using standard
operating positions accepted by the FCC with the device transmitting at its highest certified
power level in all tested frequency bands, although the SAR is determined at the highest
certified power level, the actual SAR level of the device while operating can be well below
the maximum value, in general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a new device can be made available for sale to the public, it must be tested and
certified by the FCC that it does not exceed the exposure limit established by the FCC,
Tests for each device are performed in positions and locations as required by the FCC.For
body worn operation, this device has been tested and meets the FCC RF exposure
guidelines when used with an accessory designated for this product or when used with an
accessory that contains no metal and that positions the device a minimum of 1.0 cm from
the body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause.
Undesired operation.Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.--Increase the separation between the
equipment and receiver.--Connect the equipment to an outlet on a different circuit to the
receiver.--Consult the dealer or an experienced radio/TV technician for help.
Disposal and recycling information
This symbol (with or without a solid bar) on the device, batteries (if
included), and/or the packaging, indicates that the device and its electrical accessories (for
example, a headset, adapter, or cable) and batteries should not be disposed of as
household garbage. These items should not be disposed of as unsorted municipal waste
and should be taken to a certified collection point for recycling or proper disposal. For more
detailed information about device or battery recycling, contact your local city office,
household waste disposal service, or retail store.Disposal of the device and batteries (if
included) is subject to WEEE Directive Recast (Directive 2012/19/EU) and Battery
Directive (Directive 2006/66/EC). The purpose of separating WEEE and batteries from
other waste is to minimize the
potential environmental impacts and human health risk of any hazardous substances that
may be present.
FCC Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐Consult the dealer or an experienced radio/TV technician for help.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types A4 REVOLUTION (FCC ID: 2AC88‐E1) has also been tested against this SAR limit. The
highest reported SAR values for product specific (Hotspot) are 1.20 W/kg for Main board, 1.18
W/kg for Vice Board respectively. The Max simultaneous SAR are 1.39 W/kg for Main board, 1.37
W/kg for Vice Board. This device was tested for typical body‐worn operations with the back of
the handset kept 10mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 10mm separation distance between the user's
body and the back of the handset. The use of belt clips, holsters and similar accessories should
not contain metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be avoided.
CE
Environmental Conditions
Working Temperature
Working humidity
-20 ~ 40℃
65+/-20%RH
Hereby, HONGKONG UCLOUDLINK NETWORK TECHNOLOGY LIMITED,
declares that this 4G Free Roaming Hotspot/ E1, is In compliance with the
essential Requirements and other relevant provisions of Directive 1999/5/EC.
Environment friendly disposal
You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working
electrical equipments to an appropriate waste disposal centre.
0700
A warning that batteries(battery pack or batteries installed) shall not be
exposed to excessive heat such as sunshine, fire or the like.
CAUTION RISK OF EXPLOSION IF BATTERY IS RWPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERYS ACCORDING TO THE
INSTRUCTINS
The following standards have been applied for the investigation of compliance:
ETSI EN 301 489-1 V1.9.2: 2011
ETSI EN 301 489-3 V1.6.1: 2013
ETSI EN 301 489-7 V1.3.1: 2005
ETSI EN 301 489-17 V2.2.1: 2012
ETSI EN 301 489-24 V1.5.1: 2010
ETSI EN 301 511 V9.0.2: 2003
ETSI EN 301 908-1 V6.2.1: 2013
ETSI EN 301 908-2 V6.2.1: 2013
ETSI EN 301 908-13 V6.2.1: 2013
ETSI EN 300 440-1 V1.6.1: 2010
ETSI EN 300 440-2 V1.4.1: 2010
ETSI EN 300 328 V1.8.1: 2012
IEC 62133: 2012
EN 50566:2013
EN 62479: 2010
EN 60950-1：2006 +A11: 2009 +A1: 2010+A12:2011+A2:2013
EN 55022:2010
EN 55024:2010
EN 61000-3-2:2014
EN 61000-3-3:2013
Use careful with the earphone maybe possible excessive sound pressure from
earphones and headphones can cause hearing loss The product shall only be
connected to a USB interface of version USB2.0 or higher and that the
connection to a power USB is prohibited. Adapter shall be installed near the
equipment and shall be easily accessible.
The RF distance between body and mobile phone is 5mm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2016:05:13 18:55:38+08:00
Modify Date                     : 2016:06:12 11:46:39+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - E1?User?Manual
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:06:12 11:46:39+08:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:b52ce35d-efea-43c4-8575-b803e7807e9f
Instance ID                     : uuid:77724398-2ae0-4c78-b74b-304c8eaa22d5
Page Count                      : 10

EXIF Metadata provided by EXIF.tools