UNITEIC STEALTH Stealth-6 REMOTE CONTROL ACTIVE SPEAKER User Manual
UNITEIC COMPANY LIMITED Stealth-6 REMOTE CONTROL ACTIVE SPEAKER
UNITEIC >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3565919 |
| Application ID | 05wZV0Oeau/Eo2tCV6NHpg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 362.07kB (4525887 bits) |
| Date Submitted | 2017-09-18 00:00:00 |
| Date Available | 2017-09-18 00:00:00 |
| Creation Date | 2016-06-03 13:22:53 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-09-07 13:51:12 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
User Manual Product Name: Stealth-6 REMOTE CONTROL ACTIVE SPEAKER Model:STEALTH 6 ULTRA HD Manufacture: UNITEIC COMPANY LIMITED STEALTH 6 ULTRA HD ALL-IN ONE AMPLIFIED SOUNDBAR WITH REMOTE USER MANUAL wetsounds.com 1. PASSION. PERFORMANCE. RUGGED FOR THE GREAT OUTDOORS! Thank you for choosing Wet Sounds for your high performance Audio system! We build every product with Unsurpassed PASSION so we can deliver the HIGHEST PERFORMING Products to you! We live and breathe high performance audio. So you can enjoy the very best system options available for your vehicle. The STEALTH ULTRA HD Series Sound bars are designed to give every owner of a Boat, UTV, Golf Cart and virtually any vehicle the ability to add high performance Audio in a SIMPLE to use design. Made for the great outdoors the STEALTH ULTRA HD Series Sound Bars are designed to be simple & easy audio options for your vehicle. The STEALTH ULTRA HD Sound Bars are the true High Performance 2-wire 12 Volt stealth audio system! We appreciate your passion for great audio! Thank you for choosing Wet Sounds for your high performance audio needs. For further questions, please call 1-877-938-7757 or visit www.wetsounds.com 1. Reset • If needed, press to reset sound bar for bluetooth pairing 2. Source Indicator Light • Blinking Blue – Pairing Mode • Blue – Bluetooth • No Light – Aux 3. Power – Play/Pause – Mute • Press and Hold For 3-5 Seconds to turn the unit on or off • When Source Is Selected On Bluetooth, Press For Pause/Play Function • When Source Is Selected On Auxiliary Input, Press To Mute Audio/ Un-Mute Audio 4. Volume Up • Turns the volume up 5. Source Select • Toggle between Bluetooth and Auxiliary input (3.5mm) 6. Track Back • Skip to previous track 7. Track Forward • Skip to next track 8. Volume Down • Turns the volume down 2. INSTRUCTIONS FOR USING THE UNIT Press and hold the power button for 3-5 Seconds to turn the unit on. Next, select what source you want to listen to, either Bluetooth or Auxiliary input. Stealth, then select it. That’s it! You are now paired with the unit. NOTICE: You can only pair one device to the unit at a time. If the unit is not blinking (indicating that it’s in pairing mode) make sure that it’s not connected to another device. If Bluetooth device and turn it off allowing the Stealth Ultra HD Soundbar to automatically search for new devices. Once the Stealth Ultra HD Soundbar is powered up, it can be controlled using either the control pad on the unit, or the included RF wireless remote control. Please note – power On and Off must be completed on the control pad, but all other functions of the control pad are duplicated on the wireless remote. The range for the wireless remote is approximately 12 feet, and is affected by factors such as limit the usable range of the remote. Included is a bracket to easily attach the wireless remote to a steering wheel or any other round bar. Stretch the rubber cords around the steering wheel tightly to attach the bracket, then simply slide the remote control onto the bracket. If the remote stops working the most likely cause is a dead battery. The remote is powered by one CR2032 3V lithium battery that is available wherever batteries are sold and is easily accessible by removing the 4 screws on the back of the remote housing. Before removing the screws, the rubber screw covers need to be removed. The battery slides into the battery compartment with the positive (+) side facing up. It is important to replace the rubber screw covers after reassembly to make sure the remote control is watertight. Some unique features on the STEALTH ULTRA HD Soundbar when playing your Bluetooth device, you can use the buttons on the sound bar to control your device by advancing tracks or replaying music on your device as well as volume. Also, by pressing the power button on the unit it will pause your music on your device and by pressing it again it will allow the device to continue playing. When the unit is selected in Auxiliary mode and the power button is pressed, the unit will mute the audio and un-mute the audio when pressed again. seconds and the unit will turn off. If the unit does not sense a signal from either the blue tooth or auxiliary input for 10 minutes, it will automatically turn itself off. 3. Wet Sounds STEALTH ULTRA HD Sound Bars are an operating voltage of 12 volts Weight - 13 lbs 4. INSTALLATION A. Mounting 1. Fit the appropriate tube clamp around the front strut in the desired location. *Note: you may need to remove bolts connecting the top to the front strut to complete this step. 2. If a sliding adapter was supplied in your kit, you will need to loosely fasten it to the soundbar, and then to the round tube clamps installed in step 1. 3. Ensure that the sound bar is in the desired location, then tighten all hardware. B. Wiring 1. If installing on an electric vehicle, switch it into TOW mode. Carefully remove the Positive (+) then Negative (-) battery wires. 2. A. If installing on a gas vehicle, wire the Negative (Black) wire to the Negative (-) battery terminal and the Positive (Red) wire to the Positive (+) battery terminal. B. If installing on an electric vehicle, wire the Negative (Black) wire to the Ground on the DC-DC Converter and the Positive (Red) wire to the Positive (+) post on the DC-DC Converter. 3. Route the thick Blue Aux In & Aux Out wires to your desired location. The Aux In is for a music source that does not have Bluetooth capability. The Aux Out is to connect to an 4. The Blue Remote Out wire provides +12V when the soundbar is powered on. This subwoofer, such as the STEALTH AS-10 or AS-6. 5. Tie up all excess wires and reinstall the Positive (+) then Negative (-) battery wires. If installing on an electric vehicle, switch it back into RUN mode. Note: DC-DC Converter is required on electric vehicles to avoid damage to the accessory and the vehicle. 5. What This Warranty Covers This is a “Limited” warranty. This warranty covers any defects in materials and workmanship and warranty only applies to the original purchaser and is not transferable. This warranty is also only valid if the original purchase was made from an authorized Wet Sounds™ dealer. How Long Coverage Lasts This warranty runs for 2 years from the date of the purchase. It is recommended to REGISTER your warranty online within 45 days of your purchase at www.wetsounds.com – click on “warranty registration”. What Is Not Covered This warranty does not cover fading or discoloration caused by exposure to sunlight or chemicals such as ammonia, household bleach, or any cleaning material that contains abrasive substances. (For information on how to prevent fading or discoloration, consult for recommendations on cleaning products) Wet Sounds, Inc. does not cover the cost for removal and reinstallation of any kind. Additionally, shipping TO Wet Sounds, Inc. is covered by the purchaser This warranty is void and inapplicable if Wet Sounds™ deems that the product was abused or misused; including but not limited to Speaker product that has been improperly-powered (under or over powered), causing thermal (burnt voice coil) and/or mechanical failure (torn surrounds or spiders), damage caused by accident, mishandling, improper installation, negligence, normal wear and tear, excessive water or heat damage, freight damage or products that have been altered in any way. Product owned by anyone other than the original purchaser from an authorized Wet Sounds dealer. (The warranty is not transferable and will not apply to products purchased from unauthorized dealers.) Wet Sounds is not responsible for any damages to a consumer’s boat or person from a product failure. The warranty is void if Wet Sounds deems the product was installed or used improperly. Wet Sounds shall not be responsible for any incidental or consequential damages, except to the extent provided (or prohibited) by applicable law. This warranty also have other rights which vary from state. What Wet Sounds™, Inc. Will Do Wet Sounds, Inc will repair any part of your product that proves to be defective in materials or workmanship. In the event repair is not possible, Wet Sounds, Inc will replace the product in question. If it is deemed necessary Wet Sounds, Inc. will either replace the entire product with a refurbished unit or it will be replaced with a model that is similar in price if that model is no longer available. Labor cost and materials needed to complete this service will be at no charge to the purchaser. Additionally, the cost of shipping TO the consumer is also covered under this warranty. How to Obtain Warranty Service Contact Wet Sounds, Inc. either by phone at 877-938-7757 or by email at warranty@ wetsounds.com. A service representative will assist you in the necessary actions to verify that the problem that you are experiencing is covered under warranty. If it is in fact a warranty issue, Wet Sounds will issue an RA number for tracking purposes and give instructions on sending the product in for evaluation. Wet Sounds™, Inc. How State Law Applies and you may also have other rights which vary from state to state. Internet Warning Wet Sounds, Inc. products sold on any non authorized web site or internet auction site are void of any and all manufacturer’s warranty. Please contact Wet Sounds™ at 877-9387757 or visit our web site at www.wetsounds. com to search for an authorized site and/or an authorized retailer near you. Caution & Respect Wet Sounds™ speakers can achieve very high sound pressure levels. Please use this product responsibly. Be aware that sound travels great distances so please respect others. Wet Sounds, Inc. is not responsible for any violations of the law that may be a direct result of excessive volume. Please abide by the rules but have fun doing it. Optional Accessories Please visit www.wetsounds.com for more information Stealth Clamp Square 1.25” (ST-ADP-SQ 1.25) Stealth Clamp Square 1.0” (ST-ADP-SQ 1.0) Stealth Clamp Square .75” (ST-ADP-SQ .75) Stealth Clamp Round 1.75” (ST-ADP-SQ 1.75) Stealth Clamp Round 1.5” (ST-ADP-SQ 1.5) Stealth Adapter Side Bracket (ST-ADP-SIDE BRACKET) WET SOUNDS INC. www.wetsounds.com • 877-938-7757 10621 S Sam Houston PKWY W • Suite 100 Houston, Texas 77071 • USA FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Warning This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer d'interférences ; et ( 2 ) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. A separation distance of at least 20 cm is maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. Une distance de séparation d'au moins 20 cm est maintenue entre la (les) structure (s) rayonnante (s) de l'émetteur et le corps de l'utilisateur ou des personnes proches
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Create Date : 2016:06:03 13:22:53-05:00 Creator : Adobe InDesign CC 2015 (Macintosh) Modify Date : 2017:09:07 13:51:12+08:00 Has XFA : No Language : en-US XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2017:09:07 13:51:12+08:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Thumbnail Width : 176 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22591 bytes, use -b option to extract) Instance ID : uuid:0351b145-7ebb-496d-882e-39e9b16c0b33 Original Document ID : xmp.did:61d5c6e9-250f-4a7a-b175-0551b50a1b7f Document ID : xmp.id:b041ed46-fe19-4e4e-94f3-f50e81a2bf40 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:2d1ac3fc-5ffe-4990-a6d0-0e744fd225dc Derived From Document ID : xmp.did:ae22198d-5d65-42e3-b113-3418d5ce32e3 Derived From Original Document ID: xmp.did:61d5c6e9-250f-4a7a-b175-0551b50a1b7f Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:06:03 13:22:53-05:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 139.700000 Max Page Size H : 215.900000 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT Font Family : Arial, Arial Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 5.10, Version 5.08 Font Composite : False, False Font File Name : arial.ttf, arialbd.ttf Plate Names : Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Slug Family : Conviction Slug Version : 1.00 Slug Outline File Size : 0 Slug Kerning Checksum : 0 Slug Foundry : -- Slug Font Kind : TrueType Slug Checksum : 2741576059 Slug Post Script Name : Conviction Slug Font Sense 12 Checksum : 2741576059 Page Count : 10 For : Administrator, Title : Stealth ULTRA 6 HD Soundbar Manual FINAL.pdf Bounding Box : 0 32 363 576 Container Version : 11 Creator Version : 16 Image Height : 544 Image Width : 363 Image Size : 363x544 Megapixels : 0.197EXIF Metadata provided by EXIF.tools