UROVO TECHNOLOGY U2 Wearable Data Terminal User Manual

Shenzhen Urovo Technology Co., Ltd Wearable Data Terminal Users Manual

Users Manual

Rear viewSide viewPower ButtonCamera and Flash3Battery Battery buckleEarphone PortPogo PinMagnetic interfaceMicro SD/TF Slot Micro SIM Slot1To turn on device:Hold power button until the device switches on.To turn off device:Hold power button during operation until the device shows a menu,select “Power off”To turn off display:Press the power button.device also turn off the display automatically if left idle for some time.That amount of time can be configure at “Setting→Display→Sleep”To turn on the display:Press the power button lightly.2System LEDAppearance and ButtonsFront viewLoud SpeakerF1/F2 Button Menu Button HOME Button Back ButtonTouch ScreenU2 Rugged Wearable User GuideImportant notice on lithium ion battery1)Charge the battery only with original Unitech power adaptor supplied in the box2)Do not store the device with battery installed for long period of time3)If long period storage is required, remove battery from device.4) During long storage period, maintenance work is required at every 3 months period. During maintenance, discharge the battery completely, and then charge to 60% - 70% (or 3.8V - 3.9V). 5) Store battery in dry, cool environment. Temperature should be -20 to 40 degree Celsius and relative humidity should be 45% to 85%6) Charge battery at 5 to 45 degree Celsius7) Do not operate the device outside the recommended temperature, which is from --10°-50°.8) Do not install a third party battery into Urovo device1）Do not transport the battery at temperature higher than 65 degree Celsius2）Do not expose battery to fire or heat source3）Do not forcefully install the battery in opposite direction into the device4）Avoid impact and high vibration force on the battery5）Keep battery dry at all time6）Do not use battery that is damaged or appear to have been modified7）Do not use unauthorized power adaptor to charge the battery 8）Do not discharge the battery beyond the specification of the battery9）Do not place battery into microwave oven or pressured container 10）Do not damage battery with sharp objects11）Do not operate in environment with extreme electrostatic fields or magnetic fields.12）If leakage found in battery, avoid contact with body parts. Should leakage be in contact with body parts, flush with water and immediately seek medical attention13）If battery exhibits unusual behavior like color change, temperature became hot, shape is swollen, remove battery from device and stop using that battery14）If the contact point on the battery is dirty, clean with a dry cloth 15）Dispose the battery according local regulation. Recycle if possible.16）Improper usage or storage may cause battery performance to drop, leak, damage, or even escalate to personal safety issue. Safety precaution2
67Note: If the battery appears to pop up or leak, please replace the battery.Note: When you first get the battery, the battery remaining capacity may be only about 50%, you can use the included power adapter or cradle (need to buy separately) to charge, the first charge recommended in 8 hours or more.The device battery for the polymer battery, can only use the original designated charger, must not be free to change the cradle or adapter.Do not use metal contact or artificial short-circuit electrode, can not be placed in the overheating, tide or corrosion of the environment, not squeeze or collision.The battery in the absence of electricity after the timely charge, not in the empty or full capacity of the case of long-term storage, preferably about 50% of the electricity storage; if long-term use of equipment, please remove the battery from the device to save.Battery instructionsWrist strap Installation InstructionsInsert battery in the direction as shown in the picture on the right.Sit the battery tightly in the corresponding position.When disassembling, first press the button to the unlocked " " icon position, and then pull out the battery.Note: When you enable device as USB Storage to PC, the flash memory of the device are map as a PC drive. At this point of time, you cannot install APK to the device.To install APK to the device, it should not be in USB Storage mode.Check the USB debug if you intend to develop software and step through your code with the device.Check the SD Card option if you intend to transfer files between your PC and the device.8SIM card / TF cardInstallation InstructionsThe back cover of the buckle to the unlock " " icon position to open the back cover, the SIM card in the right direction to the SIM card into the corresponding card slot (as shown), TF card installed and SIM card similar The The card is fitted with a rear cover and then the button is set to the " " position.Note:1, SIM card for the standard SIM card. 2, SIM card slot and TF card can be inserted into the position, not brute force to push. 3, TF card inserted card slot, remove the hand inward click on the TF card exposed in the card slot outside the part, hear a slight noise, TF card can pop up, do not pull out the TF card with brute force.Tap the top of the screen, drag downwards and the USB setting interface will appear.Click on this to go the next left interfaceClick on this to go the next left interfaceAfter you install the Android driver or an Android smart phone assistant, you can connect the devices to your PC with USB cable provided. (You can download the software mentioned above from www.urovo.com/en. After device connected to your PC, the screen would display like this:Connecting to PCWrist strap disassembly: forced in accordance with the "PUSH" direction down, and then the wristband along the direction of the guide pulled out.Guide directionWrist strap installation: as shown in the direction of the wrist strap guide rail into the rear cover of the guide rail groove, and then forced the wristband along the direction of the guide to the bottom.5Power adaptBattery InstallationCharging by Direct-ChargePower adaptWhen device is charged using DCpower adapter,the power indication LED is red,when fully charged,the LED will turn greenUSB-Pogo Pin Data Communication CableConnect the device and computer by USB-Pogo Pin data communication cable.BuckleUSB-Pogo Pin Data Communication CableBattery Installation
DeclarationAccessory Information object manufacturer/ trademarktype/model/technical dataBattery "ICON ENERGY SYSTEM(SHEN ZHEN) CO.,LTDHBLU2 4.35V,3000mAh"Adapter "SHEN ZHEN ZHONG LIN TECHNOLOGY CO.,LTDZAC-A050150A-02Input: 100-240V~, 50/60Hz, 0.4AOutput: 5.0Vdc, 1.5A"USB Cable 1.3m/Micro 5PIN USBCAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.This device(FCC ID:SWSU2) complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) the device may not causeharmful interference, and (2) this device must accept any interference received, including interference that may mause undesied operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However,there is no guaranteehat interference will not occur in a particular installation.If this equipment doescause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--Reorient or relocate the receiving antenna.--Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, including interference that may cause undesired operation.Warning:Changes or modifications made to this equipment not expressly approved by UROVO may void the FCC authorization to operate this equipment.The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the device is designed to use the minimum power required to reach the network. WarningThe SAR limit adopted by USA and Canada for the parts of of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit is 1.6 W/kg,averaged over any 1 grams of tissue.When properly worn on the body-> when tested at 5mm distance is 1.28 W/kg.

Navigation menu