UROVO TECHNOLOGY U2 Wearable Data Terminal User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3809303
Application ID	Ky59HMmRSWXTypXlo13z6A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	151.63kB (1895314 bits)
Date Submitted	2018-04-09 00:00:00
Date Available	2018-04-10 00:00:00
Creation Date	2017-09-19 17:59:35
Producing Software	Corel PDF Engine Version 15.0.0.486
Document Lastmod	2017-11-01 16:43:09
Document Title	U2英文折页说明书-王志坚-20170919.cdr
Document Creator	CorelDRAW X5
Document Author:	xiahangfeng

Important notice on lithium ion battery
1)Charge the battery only with original Unitech power adaptor
supplied in the box
Appearance and Buttons
Front view
2)Do not store the device with battery installed for long period of time
3)If long period storage is required, remove battery from device.
Touch Screen
Loud Speaker
System LED
4) During long storage period, maintenance work is required at every
3 months period. During maintenance, discharge the battery
completely, and then charge to 60% - 70% (or 3.8V - 3.9V).
5) Store battery in dry, cool environment. Temperature should be 20 to 40 degree Celsius and relative humidity should be 45% to 85%
Battery
6) Charge battery at 5 to 45 degree Celsius
buckle
7) Do not operate the device outside the recommended temperature,
which is from --10°-50°.
Earphone Port
8) Do not install a third party battery into Urovo device
Pogo Pin
Magnetic
interface
Safety precaution
1）Do not transport the battery at temperature higher than 65 degree
Celsius
2）Do not expose battery to fire or heat source
3）Do not forcefully install the battery in opposite direction into the
F1/F2 Button Menu Button
HOME Button Back Button
device
4）Avoid impact and high vibration force on the battery
To turn on device:Hold power button until the device switches on.
5）Keep battery dry at all time
To turn off device:Hold power button during operation until the device
6）Do not use battery that is damaged or appear to have been
shows a menu,select “Power off”
modified
To turn off display:Press the power button.device also turn off the
7）Do not use unauthorized power adaptor to charge the battery
U2 Rugged
Wearable User Guide
display automatically if left idle for some time.That amount of time can
8）Do not discharge the battery beyond the specification of the
be configure at “Setting→Display→Sleep”
battery
To turn on the display:Press the power button lightly.
9）Do not place battery into microwave oven or pressured container
Rear view
10）Do not damage battery with sharp objects
11）Do not operate in environment with extreme electrostatic fields
or magnetic fields.
Side view
12）If leakage found in battery, avoid contact with body parts.
Should leakage be in contact with body parts, flush with water and
immediately seek medical attention
Battery
Camera and Flash
Power Button
13）If battery exhibits unusual behavior like color change,
temperature became hot, shape is swollen, remove battery from
device and stop using that battery
14）If the contact point on the battery is dirty, clean with a dry cloth
15）Dispose the battery according local regulation. Recycle if
possible.
16）Improper usage or storage may cause battery performance to
drop, leak, damage, or even escalate to personal safety issue.
Micro SD/TF Slot
Micro SIM Slot
5
Battery Installation
Connecting to PC
Insert battery in the direction as shown in the picture on the right.Sit
the battery tightly in the corresponding position.
When disassembling, first press the button to the unlocked "
Charging by Direct-Charge
After you install the Android driver or an Android smart phone
" icon
assistant, you can connect the devices to your PC with USB cable
position, and then pull out the battery.
provided. (You can download the software mentioned above from
www.urovo.com/en. After device connected to your PC, the screen
Battery instructions
The device battery for the polymer battery, can only use the original
designated charger, must not be free to change the cradle or
adapter.
Power adapt
Do not use metal contact or artificial short-circuit electrode, can not
be placed in the overheating, tide or corrosion of the environment,
not squeeze or collision.
The battery in the absence of electricity after the timely charge, not in
the empty or full capacity of the case of long-term storage,
preferably about 50% of the electricity storage; if long-term use of
equipment, please remove the battery from the device to save.
USB-Pogo Pin Data Communication Cable
Power adapt
would display like this:
Note:
1, SIM card for the standard SIM card.
2, SIM card slot and TF card can be inserted into the position, not brute
force to push. 3, TF card inserted card slot, remove the hand inward click
on the TF card exposed in the card slot outside the part, hear a slight
noise, TF card can pop up, do not pull out the TF card with brute force.
Wrist strap Installation Instructions
When device is charged using DCpower adapter,the power indication
LED is red,when fully charged,the LED will turn green
USB-Pogo Pin Data Communication Cable
Tap the top of the screen, drag
downwards and the USB setting
interface will appear.
Click on this to go the next
left interface
Click on this to go the next
left interface
Connect the device and computer by USB-Pogo Pin data
communication cable.
Buckle
Note: If the battery appears to pop up or leak, please replace the
battery.
Note: When you first get the battery, the battery remaining capacity
may be only about 50%, you can use the included power adapter or
cradle (need to buy separately) to charge, the first charge
recommended in 8 hours or more.
Battery Installation
Check the USB debug if you intend
to develop software and step
through your code with the device.
SIM card / TF card
Installation Instructions
The back cover of the buckle to the unlock "
" icon position to
open the back cover, the SIM card in the right direction to the SIM
card into the corresponding card slot (as shown), TF card installed
and SIM card similar The The card is fitted with a rear cover and then
the button is set to the "
" position.
Check the SD Card option if you
intend to transfer files between
your PC and the device.
Guide direction
Note: When you enable device as USB Storage to PC, the flash
Wrist strap installation: as shown in the direction of the wrist strap
memory of the device are map as a PC drive. At this point of time,
guide rail into the rear cover of the guide rail groove, and then forced
you cannot install APK to the device.
the wristband along the direction of the guide to the bottom.
Wrist strap disassembly: forced in accordance with the "PUSH"
direction down, and then the wristband along the direction of the
guide pulled out.
To install APK to the device, it should not be in USB Storage mode.
Warning
Declaration
This device(FCC ID:SWSU2) complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:(1) the device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may mause undesied operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications. However,there is no guarantee
hat interference will not occur in a particular installation.If this equipment does
cause harmful interference to radio or television reception,which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning:
Changes or modifications made to this equipment not expressly approved by UROVO may void
the FCC authorization to operate this equipment.
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency
energy absorbed by the body when using a device. The SAR value is determined at the highest
certified power level in laboratory conditions, but the actual SAR level of the device when being
operated can be well below the value. This is because the device is designed to use the minimum
power required to reach the network. The SAR limit adopted by USA and Canada for the parts of
of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae,
where the peak spatial-average SAR limit is 1.6 W/kg,averaged over any 1 grams of tissue.
When properly worn on the body-> when tested at 5mm distance is 1.28 W/kg.
Accessory Information
object manufacturer/ trademarktype/model/technical data
Battery "ICON ENERGY SYSTEM(SHEN ZHEN) CO.,LTD
HBLU2
4.35V,3000mAh"
Adapter "SHEN ZHEN ZHONG LIN TECHNOLOGY CO.,LTD
ZAC-A050150A-02
Input:
100-240V~,
50/60Hz, 0.4A
Output:
5.0Vdc, 1.5A"
USB Cable
1.3m/Micro 5PIN USB
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Author                          : xiahangfeng
Create Date                     : 2017:09:19 17:59:35+08:00
Modify Date                     : 2017:11:01 16:43:09+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : xiahangfeng
Title                           : U2英文折页说明书-王志坚-20170919.cdr
Creator Tool                    : CorelDRAW X5
Metadata Date                   : 2017:11:01 16:43:09+08:00
Producer                        : Corel PDF Engine Version 15.0.0.486
Document ID                     : uuid:640c387b-b3d0-4e96-9460-0d7f3ee1f356
Instance ID                     : uuid:52f17796-44f8-425f-b37b-e15bbfc573f8
Page Count                      : 3
Profile CMM Type                : Linotronic
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : Hewlett-Packard
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : Hewlett-Packard
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools