UTC Fire and Security Americas 715A-2PANIC 60-457-10-319.5 User Manual

UTC Fire & Security Americas Corporation, Inc. 60-457-10-319.5

User Manual

Download: UTC Fire and Security Americas 715A-2PANIC 60-457-10-319.5 User Manual
Mirror Download [FCC.gov]UTC Fire and Security Americas 715A-2PANIC 60-457-10-319.5 User Manual
Document ID2323980
Application IDdl+8Mpj4mVoELA3IvEo+BA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.91kB (111354 bits)
Date Submitted2014-07-13 00:00:00
Date Available2014-07-13 00:00:00
Creation Date2014-06-06 08:56:39
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2014-06-06 08:56:39
Document TitleLearn Mode Handheld Panic Button Installation Instructions
Document CreatorMicrosoft® Word 2010
Document Author: Eli Houghton

Learn Mode Handheld Panic Button Installation
Instructions
Overview
Testing
Portable, hand held “P anic” transmitters are typically used as
panic buttons to activate 24-hour “Police Emergency” alarms or
24-hour “Auxiliary” alarms.
General guidelines for performing a Dealer Sensor Test are:
The single button transmitter can be activated by pressing
anywhere within the “ALERT” box, and holding for one second.
Figure 1: 60-458 and 60-457 Handheld Panic Button
1.
Using the appropriate touchpad for the CPU, enter the
applicable Dealer Sensor Test code.
2.
Trip the panic by pressing the alert box(es) on panic.
3.
Note the number of beeps from the CPU. These beeps
indicate how much of the panic button’s RF signal
(rounds) is being heard by the CPU.
Regulatory information
Manufacturer
UTC Fire & Security Americas Corporation, Inc.
1275 Red Fox Rd., Arden Hills, MN 55112-6943,
USA
FCC compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved
by Interlogix can void the user’s authority to
operate the equipment.
Light control
FCC ID: B4Z-715A-1PANIC
Activate the dual button transmitter by pressing both alert
boxes at the same time for one second. The light control button
is for systems with optional X-10 modules installed (Not
investigated by UL)
FCC ID: B4Z-715A-2PANIC
IC compliance
IC: 1175C-7151PANIC
IC: 1175C-7152PANIC
This Class B digital apparatus complies with
Canadian ICES-003.
Battery Power
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
The Single and Dual Button Alert Panic Transmitters are
powered by a 3.6 volt Lithium battery (Saft LS3), which should
last at least 1 year under normal circumstances.
Le fonctionnement est soumis aux deux
conditions suivantes : (1) cet appareil peut ne pas
provoquer d’interférences et (2) cet appareil doit
accepter toutes interférences, y compris les
interférences pouvant provoquer un
fonctionnement non désiré de l’appareil.
Programming
General guidelines for programming this sensor are:
1.
Set the CPU into Program Mode
2.
Trip the panic by pressing the alert box(es) on panic.
3.
Set the CPU to its normal operating mode.
Note: Refer to the appropriate CPU installation manual for
specific instructions for programming this sensor.
P/N 46-437 • REV D • 06JUN14
Contact information
For general information, see www.interlogix.com. For
customer/technical support, see www.interlogix.com/customersupport or call +1 855 286 8889.
© 2014 United Technologies Corporation. Interlogix is part of
UTC Building and Industrial Systems, a unit of United
Technologies Corporation. All rights reserved.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Language                        : en-US
Tagged PDF                      : Yes
Title                           : Learn Mode Handheld Panic Button Installation Instructions
Author                          : Eli Houghton
Subject                         : Learn Mode Water Resistant Pendant Panic Button
Creator                         : Microsoft® Word 2010
Create Date                     : 2014:06:06 08:56:39-05:00
Modify Date                     : 2014:06:06 08:56:39-05:00
Producer                        : Microsoft® Word 2010
EXIF Metadata provided by EXIF.tools
FCC ID Filing: B4Z-715A-2PANIC

Navigation menu