UTT TECHNOLOGIES REG10-UTT Wireless Router User Manual 10
SHANGHAI UTT TECHNOLOGIES CO., LTD. Wireless Router 10
10 user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3078041 |
| Application ID | HMqNTKsq/RTyh2u8/c0ayg== |
| Document Description | 10 user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 433.51kB (5418933 bits) |
| Date Submitted | 2016-07-27 00:00:00 |
| Date Available | 2016-07-27 00:00:00 |
| Creation Date | 2016-01-08 15:56:50 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2016-07-04 11:20:12 |
| Document Title | SOHO Wireless Router Quick Start Guide 0904-0003-014 |
| Document Creator | Adobe Illustrator CS6 (Windows) |
DSL Modem SOHO Wireless Router WAN The WAN interface is connected to your Internet device, such as a cable or modem. LAN These interfaces provide a LAN connection to network devices, such as PCs or switches. USB Plug-in a USB storage for data sharing. TF Insert a TF card for data sharing. DC The DC interface is where you connect the provided power adapter. ON/OFF Reset Press this button to turn the Device on and off. Reset current settings to Factory Default Settings. While the Device is powered on, use a pin or paperclip to press and hold the Reset button for more than 5 seconds, and then release the button. After that, the Device will restart with factory defalut settings. The Power LED indicator is on when the Device is powered on. The LED indicator blinks twice per second when the system is operating properly, and it will blink slower if the system is under heavy load. The 2.4G LED indicator is on when 2.4GHz Wireless is enabled, and it blinks when transmitting/receiving 2.4G wireless data. The 5G LED indicator is on when 5GHz Wireless is enabled, and it blinks when transmitting/receiving 5G wireless data. SN: 0904-0003-014 Note: 1. The picture is only for reference. Please make the object as the standard. 2. Please power off the Device and disconnect all cables from the Device during thunderstorms to avoid possible damage from a lightning strike. 3. Please install the equipment in a place away from the High Power Radio or Radar Station. 4. Please KEEP THIS DEVICE AWAY FROM WATER! 5. Please use the provided power adapter. The LED indicator is yellow when the USB interface is connected properly, and it is red when the TF port is connected properly. The WAN LED indicator is on when Ethernet cable connection is normal, and it blinks when the WAN port is sending or receiving data. The LAN LED indicator is on when Ethernet cable connection is normal, and it blinks when the LAN port is sending or receiving data. www.uttlogin.com address field of your browser. Click “Yes to configure the router now”. http://www.uttlogin.com/-Microsoft Internet... www.uttlogin.com http://www.uttlogin.com/-Microsoft Internet... www.uttlogin.com Click “Start Control Panel Network and Connection Wireless Network Connection”, make sure wireless network connection is enabled. Click icon in the task bar. Please choose the wireless network you are going to connect in the pop-up list and click “Connect”. Enter wireless password that has been set in the pop-up screen and click “Connect”. www.uttlogin.com Click “Start Control Panel Network and Connection Network and sharing centre Change Adapter Settings”, make sure wireless network connection is enabled. Click icon in the task bar. Please choose the wireless network you are going to connect in the pop-up list and click “Connect”. Enter wireless password that has been set in the pop-up screen and click “OK”. Configure your Internet settings and click “Save”. PPPoE Connection: Enter your PPPoE username and password offered by your ISP. Congigure wireless settings (2.4G) and click “Save”. Dynamic IP: ISP does not provide any data, you can access Internet without any username or IP address settings. If you need to configure 5G wireless network, you can click “Save” and continue to configure 5G Wireless network (only for dual-band wireless router. Static IP: Enter your IP Address, Subnet Mask, Gateway IP Address and DNS Address offered by your ISP. Click “System setup”. Open the WLAN, and click network list. Please click the wireless network you are going to connect. Click “Connect to the network”. Click “setup”. Click “ Open the WLAN. Please click the wireless network you are going to connect. Configuration completed. WLAN”. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Title : SOHO Wireless Router Quick Start Guide 0904-0003-014 Metadata Date : 2016:07:04 11:20:12+08:00 Modify Date : 2016:07:04 11:20:12+08:00 Create Date : 2016:01:08 15:56:50+09:00 Creator Tool : Adobe Illustrator CS6 (Windows) Thumbnail Width : 256 Thumbnail Height : 60 Thumbnail Format : JPEG Thumbnail Image : (Binary data 6083 bytes, use -b option to extract) Instance ID : uuid:f22983f5-2280-45a4-af48-546f37913431 Document ID : xmp.did:2C81165DDDB5E5118079DCA0A30BE6EF Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:609d7b6d-4e00-45f2-bfbc-83651dc6fd22 Derived From Document ID : xmp.did:CE027F18C1B5E511A590A553B45CDE43 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:2F7E94ECB117E41181A6D90190169B35, xmp.iid:2C81165DDDB5E5118079DCA0A30BE6EF History When : 2014:07:30 17:58:33+08:00, 2016:01:08 15:56:45+08:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : F:\mail\黄青兰-mail-2013-08-28\11.25\图片\未标题-1.png, F:\mail\黄青兰-mail-2013-08-28\11.25\图片\未标题-1.png, C:\Documents and Settings\huang.qinglan\桌面\未标题-1.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 426.000526 Max Page Size H : 290.999809 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT Font Family : Arial, Arial Font Face : Regular, Bold Font Type : Open Type, Open Type Font Version : Version 5.01.2x, Version 5.01.2x Font Composite : False, False Font File Name : Arial.ttf, Arial Bold.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Colorants Tint : 100.000000 Swatch Groups Group Name : 鲜艳 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 60.000002 Swatch Groups Colorants Magenta : 90.000004 Swatch Groups Colorants Yellow : 0.003099 Swatch Groups Colorants Black : 0.003099 Producer : Adobe PDF library 10.01 Page Count : 3 Container Version : 11 Creator Version : 16 Creator : Adobe Illustrator(R) 16.0 For : ˫, Bounding Box : 0 -849 3867 10EXIF Metadata provided by EXIF.tools