Ubiqconn Technology T10CA10 TABLET PC User Manual T10C UserMan

Download:
Mirror Download [FCC.gov]
Document ID	2009952
Application ID	42VUMO+nj39RwYzBW3ddfQ==
Document Description	(T10C) UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.16kB (502058 bits)
Date Submitted	2013-07-08 00:00:00
Date Available	2013-07-09 00:00:00
Creation Date	2013-06-26 14:33:00
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2013-06-26 14:33:00
Document Title	Microsoft Word - T10C UM V1 0_0626 for Ubiqconn.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	levenhuang

Preface
Rugged Tablet PC
User Manual
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device
could void the user's authority to operate the equipment.
Labeling requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RF exposure warning
This equipment must be installed and operated in accordance with provided
instructions and must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be providing with
antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.
SAR Value: 1.450 W/kg
This device is operation in 5.15 – 5.25GHz frequency range, then restricted in indoor
use only, Outdoor operations in the 5150~5250MHz is prohibit.
This device is slave equipment, the device is not radar detection and not ad‐hoc
operation in the DFS band.
Canada, Industry Canada (IC) Notices
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry Canada (IC) radio
frequency exposure limits.
The Wireless Device should be used in such a manner such that the potential for human
contact during normal operation is minimized.
This device has been evaluated for and shown compliant with the IC Specific Absorption
Rate (“SAR＂) limits when installed in specific host products operated in portable
exposure conditions.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et
RSS-210.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit
pas causer d'interférence et (2) cet appareil doit accepter toute interférence, notamment
les interférences qui peuvent affecter son fonctionnement.
Informations concernant l'exposition aux fréquences radio (RF)
La puissance de sortie émise par l＇appareil de sans fil est inférieure à la limite
d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l＇appareil de sans fil
de façon à minimiser les contacts humains lors du fonctionnement normal.
Ce périphérique a été évalué et démontré conforme aux limites SAR (Specific Absorption
Rate – Taux d'absorption spécifique) d'IC lorsqu'il est installé dans des produits hôtes
particuliers qui fonctionnent dans des conditions d'exposition à des appareils portables.
Exploring Your T10C Tablet
Before starting to set up the T10C, get familiar with the locations and purposes of
controls, connectors and ports, which are illustrated in the figures below. When placed
upright on the desktop, the front panel of the T10C appears as shown in below.
The front side of the T10C is equipped the I/O as described below.
F1 Button
F1=explorer
F2 Button
F2=Windows Media Player
F3 Button
F3=OnScreen keyboard (osk)
Navigation Button F4=Task Manager
Fn Button


Fn = Hotkey Utility
Camera/2 Mega-pixel (Front)
The built-in camera can be used as a communication device for allowing you to
capture images, record videos, and have video chats. It is 2M pixels and transmitting
instant image through network for conference.
Camera/5 Mega-pixel (Rear)
The built-in high resolution camera can be used as a communication device for
allowing you to capture images, record videos, and have video chats.

LED Power/Storage/Wireless
Keeps you informed of your system’s current power status, storage access status, and
wireless devices ON/OFF status.
1. Power LED Indicator
2. Storage Access
3. Wireless ON/OFF
Power LED Indicator
Letting you know that system is turned on and indicate the battery charging
status.

Lights green when the system is powered on and battery is discharging

Lights amber when the system is powered on and battery is charging

Lights blinking amber when the system is in S3 sleep mode and battery
is charging or lights blinking green when the system is in S3 sleep mode
and battery is fully charged

Lights off when system is powered off or the battery is fully charged.
Storage Access
When LED blinking white indicates that the system is accessing the Storage
Drive.
Wireless ON/OFF
When LED turns on, white LED indicates that a wireless
device(Wifi/Bluetooth) is activated. When LED turns off, it indicates that all
wireless devices are being disabled.
System Status Information
This utility shows you the battery capacity status, RF status with its signal
strength and system information, and provides the control panel for the function
setting.
For battery capacity status:
The T10C is equipped with one internal battery and one optional external
battery.
The battery capacity status shown below advises you, that only one internal
battery is embedded with the system with fully charged, and there is no 2nd
optional battery installed in the system.
If the system installs both the 1st internal battery and 2nd optional battery, the
illustration shown below indicates its current charging status and capacity.
If 1st battery capacity drops to 15%, the system will display the following warning
message for 5 seconds.
For RF status:
The following RF status shows you that the system is equipped with Wi‐Fi, and
Bluetooth functions. If you want to close either of these functions, please refer
section for how to disable it.
The following signal strength shows you that the Wi‐Fi function is connecting
currently, the stronger the signal strength, the more scale will show on the bar. If
there is no module in the system, there will be no status scale in the following
status bar.
For System Information:
The system information shown on the left shows you the utility
version, BIOS and EC version and you can use them for customer
service when asked.
Using the Application
Your T10C has numbers of applications on the control panel for executing specific
command. It provides you to adjust brightness, volume, launch webcam, and switch
monitor (via docking).
Brightness Control
For brightness adjustment, press the Brightness
icon.
When you press it, the brightness control panel is appeared as follows:

You can click
or
to reduce or increase the LCD brightness.

Also, you can slide the scale bar
to set the brightness.
Volume Control
For Volume adjustment, press the Volume
icon.
When you press it, the Volume control panel is appeared as follows:

You can click
incrementally.
or
to reduce or increase the audio volume

Also, you can slide the scale bar

You can tick the Mute
to set the audio volume.
to mute the audio.
Launch Webcam Utility
For Webcam Launch, press the Webcam
Or can access the Webcam
icon to launch the Webcam utility.
icon located on desktop.
Maintaining the Battery


Do not expose heat or attempt to disassemble the battery, and do not place
the battery in water or in a fire.
Do not subject the battery to strong impact, such as a blow from a hammer,
or stepping on or dropping it.





Do not puncture or disassemble the battery.
Do not attempt to open or service the battery.
Replace only with batteries designed specifically for this product.
Keep the battery out of reach of children.
Dispose of used batteries according to local regulations.
Maintaining the LCD Display






Only operate touch panel using a polyacetal stylus pen (tip R0.8 mm or
more) or a finger.
Do not scratch the surface of the screen with any hard objects.
Do not operate touch panel with hard or sharp tips such as a ball point pen
or a mechanical pencil as it would make permanent scratch to the surface
of touch screen.
Do not spray corrosive liquid directly on the screen or allow excess liquid to
drip down inside the device.
Do not place anything, such as food and drink, on the screen at any time to
prevent damage to the screen.
Clean the LCD display only with a soft cloth dampened with denatured
alcohol or a proprietary LCD screen cleaner.
Cleaning the T10C


Turn off the T10C and unplug the power cord.
Wipe the screen and exterior with a soft, damp cloth moistened only with
water. Do not use liquid or aerosol cleaners on the screen, as these will
discolor the finish and damage the screen.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : levenhuang
Create Date                     : 2013:06:26 14:33:00+08:00
Modify Date                     : 2013:06:26 14:33:00+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - T10C UM V1 0_0626 for Ubiqconn.docx
Creator                         : levenhuang
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:8934415a-426a-409e-83dc-f90e94ef97ce
Instance ID                     : uuid:ee457786-1c65-4a21-ab1a-18d61db471fd
Page Count                      : 9

EXIF Metadata provided by EXIF.tools