Ubiquiti AF4X Dual Channel OFDM MIMO Point to Point Device User Manual airFiber X User Guide
Ubiquiti Networks, Inc. Dual Channel OFDM MIMO Point to Point Device airFiber X User Guide
Ubiquiti >
Contents
- 1. Users Manual pt 1
- 2. Users Manual pt 2
- 3. Users Manual pt 3
- 4. Users Manual pt 4
- 5. Users Manual pt 5
Users Manual pt 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2963298 |
| Application ID | oJYQS9BBCwKFnS50QM7JFA== |
| Document Description | Users Manual pt 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | Yes |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 216.63kB (2707885 bits) |
| Date Submitted | 2016-04-07 00:00:00 |
| Date Available | 2016-10-04 00:00:00 |
| Creation Date | 2016-04-19 17:19:44 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-04-19 17:19:58 |
| Document Title | airFiber X User Guide |
| Document Creator | Adobe InDesign CC 2015 (Macintosh) |
| Document Author: | A Imaoka |
2.4 GHz, 3 GHz, 4 GHz, 5 GHz Carrier Backhaul Radio Model: AF-2X, AF-3X, AF-4X, AF-5X airFiber X User Guide Table of Contents Table of Contents Chapter 1: Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 airFiber Configuration Interface System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Chapter 2: Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installation Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting Power over Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 airFiber Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Alignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Installer Compliance Responsibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Chapter 3: Navigation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Accessing the airFiber Configuration Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Product Verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Interface Tabs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 4: Main Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Ethernet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Chapter 5: Wireless Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Basic Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Frequency Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Wireless Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Chapter 6: Network Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Management Network Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Chapter 7: Advanced Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Wireless Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DATA Port Ethernet Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 MGMT Port Ethernet Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Ubiquiti Networks, Inc. Table of Contents airFiber X User Guide Chapter 8: Services Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Ping Watchdog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 SNMP Agent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Telnet Server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 NTP Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Dynamic DNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 System Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Device Discovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Chapter 9: System Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Firmware Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Date Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 System Accounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Device Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Configuration Management. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Chapter 10: Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Align Antenna. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Ping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Traceroute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 airView. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Appendix A: Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Appendix B: AF-5X and airFiber Multiplexer. . . . . . . . . . . . . . . . . . . . . . . . 45 airFiber X Compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Configure the airFiber 5X Radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Hardware Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Appendix C: Listen Before Talk. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 Unrestricted Protocol Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Threshold Detection To Determine Occupancy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Action Taken When Occupancy is Determined . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Opportunities for Other Transmitters to Operate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ii Ubiquiti Networks, Inc. airFiber X User Guide Table of Contents Appendix D: Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Electrical Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Appendix E: Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Appendix F: Compliance Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Installer Compliance Responsibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 FCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Industry Canada. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 RF Exposure Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Australia and New Zealand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 CE Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 airFiber AF-4X Compliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Frequency Ranges and Power Levels per Country/Region . . . . . . . . . . . . . . . . . . . . . . . . 63 RoHS/WEEE Compliance Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Appendix G: Declaration of Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Appendix H: Contact Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Ubiquiti Networks Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Ubiquiti Networks, Inc. iii Table of Contents iv airFiber X User Guide Ubiquiti Networks, Inc. airFiber X User Guide Chapter 1: Overview Chapter 1: Overview airFiber Configuration Interface System Requirements Introduction • Microsoft Windows 7, Windows 8; Linux; or Mac OS X Thank you for purchasing the Ubiquiti Networks® airFiber® X Carrier Backhaul Radio. This User Guide is for use with the following models: • Java Runtime Environment 1.6 (or above) Model Description AF-2X 2.4 GHz Carrier Backhaul Radio Operating Frequency* 2400 - 2500 MHz AF-3X 3 GHz Carrier Backhaul Radio 3300 - 3900 MHz AF-4X 4 GHz Carrier Backhaul Radio 4940-4990 MHz AF-5X 5 GHz Carrier Backhaul Radio 5150 - 5925 MHz * Depends on Regulatory Region. Refer to “Specifications” on page 41 for more information. • Web Browser: Mozilla Firefox, Apple Safari, Google Chrome, Microsoft Edge, or Microsoft Internet Explorer 11 Hardware Overview Chain 0: Connects to +45° on airFiber Antenna Connects to External GPS Antenna Chain 1: Connects to -45° on airFiber Antenna This User Guide provides installation instructions, explains how to set up an airFiber link, and shows how to access and use the airFiber Configuration Interface. Note: Throughout this User Guide, airFiber X radio refers to all models listed above. Unless noted otherwise, illustrations for a specific model are applicable to all airFiber X radio models and accessories. Package Contents airFiber AF-2X, AF-3X, AF-4X, or AF‑5X GPS Antenna Mount External GPS Antenna LED Panel Metal Strap Cable Ties (Qty. 2) Universal Bracket (AF-4X and AF-5X only) LINK GPS MGMT DATA 5 GHz Carrier Backhaul Radio Model: AF-5X airFiber PoE (24V, 1A) with Mounting Bracket Power Cord DATA MGMT GPS LINK Quick Start Guide TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the customer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Ubiquiti Networks, Inc. Port Cover Chapter 1: Overview airFiber X User Guide Ports Signal Level Once fully booted, the Signal 1-4 LEDs act as a bar graph showing how close the airFiber X radio is to ideal aiming. This is auto-scaled based on the link range, the antenna gains, and the configured TX power of the remote airFiber X radio. Each Signal LED has three possible states: On, Flashing, and Off. All Signal LEDs would be solidly on in an ideal link. If the link has a 1 dB loss, the Signal 4 LED will flash; a 2 dB loss and the Signal 4 LED will turn off. The full bar graph LED states are shown below. dB loss Management Port Reset Button Data Port Management Port 10/100 Mbps, secured Ethernet port for configuration. In-Band Management is enabled by default in the airFiber Configuration Interface. When In‑Band Management is disabled, the MGMT port is the only port that can monitor, configure, and/or update firmware. -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 0 = Off, 1 = On, F = Flashing Additional LEDs LED LINK Reset Button To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the device is already powered on. Data Port Gigabit PoE port for handling all user traffic and powering the device. Status Off RF Off Short Flash* Syncing Normal Flash* Beaconing Long Flash* Registering On Operational Off No GPS Synchronization Normal Flash* Non-Operational (Weak Signal) LEDs On Operational (Strong Signal) Signal LEDs Off No Ethernet Link On Ethernet Link Established Signal 3 LED will light green when on. Random Flashing Ethernet Activity Signal 2 LED will light yellow when on. Off No Ethernet Link On Ethernet Link Established Random Flashing Ethernet Activity Off No Power On Powered On Signal 4 LED will light blue when on. Signal 1 LED will light red when on. Bootup to airOS When powering on, the Power, GPS, LINK, and Signal 1-4 LEDs light on. Once the CPU code takes over, the GPS, LINK, and Signal 1-3 LEDs turn off. Signal 4 LED remains on to indicate the boot sequence is underway. Initializing airFiber Software When the airFiber application begins to boot under airOS, the Signal 4 LED goes from solidly on to a 2.5 Hz flash. This continues until the airFiber X radio is fully booted. GPS State MGMT DATA * Short Flash (1:3 on/off cycle) Normal Flash (1:1 on/off cycle) Long Flash (3:1 on/off cycle) Ubiquiti Networks, Inc. airFiber X User Guide Chapter 2: Installation Chapter 2: Installation • Secure the ground wire and mount the GPS antenna. Installation Requirements Connecting Power over Ethernet The airFiber radio operates only with the antennas listed below: 1. Lift the release latch on the bottom of the airFiber X radio and slide the Port Cover off. airFiber Radio airFiber X Antenna • Establish and optimize the RF link. RocketDish + Conversion Kit AF-2X AF-2G24-S45 n/a AF-3X AF-3G26-S45 n/a AF-4X AF-5G30-S45 AF-5G34-S45 RD-5G30 + AF-5G-OMT-S45 RD-5G34 + AF-5G-OMT-S45 AF-5X AF-5G23-S45 AF-5G30-S45 AF-5G34-S45 RD-5G30 + AF-5G-OMT-S45 RD-5G34 + AF-5G-OMT-S45 See the antenna’s Quick Start Guide for antenna installation instructions. Other Requirements • Clear line of sight between airFiber X radios 2. Connect an Ethernet cable to the DATA port. • Clear view of the sky for proper GPS operation • Vertical mounting orientation • Mounting point: • At least 1 m below the highest point on the structure • For tower installations, at least 3 m below the top of the tower • Ground wires – min. 10 AWG (5 mm2) and max. length: 1 m. As a safety precaution, ground the airFiber X radio to grounded masts, poles, towers, or grounding bars. WARNING: Failure to properly ground your airFiber X radio will void your warranty. • (Recommended) 2 Outdoor Gigabit PoE surge protectors Note: For guidelines about grounding and lightning protection, follow your local electrical regulatory codes. • Outdoor, shielded Category 6 (or above) cabling and shielded RJ-45 connectors are required for all wired Ethernet connections. Installation Overview We recommend to configure your paired airFiber X radios before site installation. The overview below summarizes the installation procedure, and the subsequent sections provide detailed installation information: 3. Connect the Ethernet cable from the DATA port to the Ethernet port labeled POE on the airFiber PoE Adapter. WARNING: Use only the included airFiber PoE adapter, Model GP-H240-100G-4. Failure to do so can damage the unit and void the product warranty. • Connect the airFiber PoE Adapter to the DATA port, and connect your computer and the MGMT port. • Configure the airFiber X radio. • Install a ground wire and mount the airFiber X radio on an airFiber X antenna. • At the installation site, install the airFiber X antenna with the mounted airFiber X radio (see the antenna’s Quick Start Guide for installation instructions). Ubiquiti Networks, Inc. Chapter 2: Installation 4. Connect the Power Cord to the power port on the airFiber PoE Adapter. Connect the other end of the Power Cord to a power source. airFiber Configuration The instructions in this section explain how to access the airFiber Configuration Interface and configure the following settings: airFiber X User Guide 4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Country and Language. You must agree to the Terms of Use to use the product. Click Login. Note for models AF-2X, AF-3X, and AF-5X only: U.S. product versions are locked to the U.S. Country Code to ensure compliance with FCC regulations. 5. Click the Wireless tab. • Wireless Mode Configure one airFiber X radio as the Master and the other as the Slave. • Frequency Setting The operating Frequency must be the same on both the Master and the Slave. 1. Connect an Ethernet cable from your computer to the MGMT port on the airFiber X radio. 6. Configure the Basic Wireless Settings: a. For one airFiber X radio, select Master as the Wireless Mode. For the other airFiber X radio, keep the default, Slave. b. Enter a name in the Link Name field. This should be the same on both the Master and the Slave. 2. Configure the Ethernet adapter on your computer with a static IP address on the 192.168.1.x subnet. 3. Launch your web browser. Type http://192.168.1.20 in the address field and press enter (PC) or return (Mac). c. If needed, change the Channel Bandwidth, (Master) Duty Cycle, Output Power, Cable Loss (see Note below), and/or Maximum Modulation Rate settings. Note: If you are using the airFiber AF-5X radio with an airFiber Multiplexer, perform the following additional steps: d. Set the Cable Loss to a value that includes the additional loss (in dB) due to the Multiplexer. The additional cable loss is (approximately): • 4 dB for the AF-MPx4, or • 7 dB for the AF-MPx8 e. Enable the NxN Radio setting on each end of the link. Ubiquiti Networks, Inc. airFiber X User Guide 7. Configure the Frequency Settings. The selected Frequency must be the same on both airFiber X radios. 8. Configure the Wireless Security: a. Select the AES Key Type, HEX or ASCII. b. For the Key field: -- HEX Enter 16 bytes (eight, 16-bit HEX values: 0-9, A-F, or a-f ). You can omit zeroes and use colons, similar to the IPv6 format. Note: The airFiber Configuration Interface supports IPv6 formats excluding dotted quad and “::” (double‑colon) notation. -- ASCII Enter a combination of alphanumeric characters (0-9, A-Z, or a-z). Chapter 2: Installation Hardware Installation Install a Ground Wire 1. Remove the nut from the Ground Bonding Point located on the back of the airFiber X radio. Ground Bonding Point 9. Click Change and then click Apply. 10. In-Band Management is enabled by default, so each airFiber X radio must have a unique IP Address. (If the airFiber X radios use the same IP Address, you may lose access to the airFiber X radios via the DATA ports.) Click the Network tab. 2. Attach a ground wire (min. 10 AWG or 5 mm2) to the lug and replace the nut to secure the wire. a. For the Management IP Address option: -- DHCP Keep the default, DHCP, to use DHCP reservation on your router to assign a unique IP Address. -- Static Change the IP Address, Netmask, and other settings to make them compatible with your network. b. Click Change and then click Apply. Repeat the instructions in the airFiber Configuration section on your other airFiber X radio. After you have configured the airFiber X radios, disconnect them and move them to your installation site. 3. At the installation site, secure the other end of the ground wire to a grounded mast, pole, tower, or grounding bar. WARNING: Failure to properly ground your airFiber X radio will void your warranty. Note: The ground wire should be as short as possible and no longer than one meter in length. Ubiquiti Networks, Inc. Chapter 2: Installation Mount to an Antenna The airFiber X radio can be mounted to the antenna(s) listed in “Installation Requirements” on page 3. The airFiber X Antenna (AF-5G30-S45) is shown in the following steps: airFiber X User Guide 3. Attach the External GPS Antenna (included with the radio) to the RF connector labeled GPS on the radio. 1. Attach the airFiber X radio to the antenna by aligning the four tabs on the back of the radio with the slots of the radio mount. Then slide the radio down to lock it into place. 4. Attach the protective shroud. a. Align the hash mark on the top of the shroud with the notch on the dish antenna. b. Rotate the shroud clockwise until it locks into place. 2. Attach the RF connectors to the radio in this combination: +45° to Chain 0 and -45° to Chain 1. Then slide the jackets over the RF connectors to protect them. Ubiquiti Networks, Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Modify Date : 2016:04:19 17:19:58-07:00 Create Date : 2016:04:19 17:19:44-07:00 Metadata Date : 2016:04:19 17:19:58-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Format : application/pdf Title : airFiber X User Guide Creator : A Imaoka Document ID : uuid:d2a82ce9-acea-4df3-bea7-a4a4621ca799 Instance ID : uuid:705d9f9a-a70a-45dc-b11c-cdf19c6d7347 Producer : Adobe PDF Library 15.0 Page Count : 12 Author : A ImaokaEXIF Metadata provided by EXIF.tools