Ubiquiti B2 High Performance 802.11b/g outdoor point to point device User Manual b2 guide graffle

Ubiquiti Networks, Inc. High Performance 802.11b/g outdoor point to point device b2 guide graffle

User Manual

B2 USER GUIDE
DataRate TX Power Tolerance DataRate Sensitivity Tolerance1Mbps 28 dBm +/-1dB 1Mbps -97 dBm +/-1dB2Mbps 28 dBm +/-1dB 2Mbps -96 dBm +/-1dB5.5Mbps 28 dBm +/-1dB 5.5Mbps -95 dBm +/-1dB11Mbps 28 dBm +/-1dB 11Mbps -92 dBm +/-1dB6Mbps 28 dBm +/-1dB 6Mbps -94 dBm +/-1dB9Mbps 28 dBm +/-1dB 9Mbps -93 dBm +/-1dB12Mbps 28 dBm +/-1dB 12Mbps -91 dBm +/-1dB18Mbps 28 dBm +/-1dB 18Mbps -90 dBm +/-1dB24Mbps 28 dBm +/-1dB 24Mbps -86 dBm +/-1dB36Mbps 24 dBm +/-1dB 36Mbps -83 dBm +/-1dB48Mbps 23 dBm +/-1dB 48Mbps -77 dBm +/-1dB54Mbps 22 dBm +/-1dB 54Mbps -74 dBm +/-1dBSOFTWAREvisit www.ubnt.com/airos Shock and VibrationETSI300-019-1.4Power MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Max Power Consumption4 WattsPower SupplyOperating Temperature -20C to +70COperating Humidity5 to 95% Condensing12V, 1A (12 Watts). Supply and injector includedEnclosure CharacteristicsOutdoor UV Stabalized Plastic Mounting KitPole Mounting Kit includedEnclosure Size12 in. length x 4 in. height x 1in. WidthWeight0.9kgPHYSICAL / ELECTRICAL / ENVIRONMENTALNetworking Interface2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceRoHS ComplianceYESREGULATORY / COMPLIANCE INFORMATIONSYSTEM INFORMATIONProcessor SpecsAtheros AR2315 SOC, MIPS 4KC, 180MHzMemory Information16MB SDRAM, 4MB FlashWireless ApprovalsFCC Part 15.247, IC RS210, CERADIO OPERATING FREQUENCY 2412-2462 MHzOutdoor (BaseStation Antenna Dependent):Over 15km RANGE PERFORMANCE802.11b802.11g OFDM802.11g OFDMTX SPECIFICATIONSRX SPECIFICATIONS802.11b
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The antennas used for this transmitter must be installed to provide a separation operating in conjunction with any other antenna or transmitter. ! INDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! distance of at least 20cm from all persons and must not be located or

Navigation menu