Ubiquiti B2 High Performance 802.11b/g outdoor point to point device User Manual b2 guide graffle
Ubiquiti Networks, Inc. High Performance 802.11b/g outdoor point to point device b2 guide graffle
Ubiquiti >
User Manual
B2 USER GUIDE SYSTEM INFORMATION Processor Specs Memory Information Networking Interface Atheros AR2315 SOC, MIPS 4KC, 180MHz 16MB SDRAM, 4MB Flash 2 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet Interface REGULATORY / COMPLIANCE INFORMATION FCC Part 15.247, IC RS210, CE YES Tolerance +/-1dB +/-1dB +/-1dB +/-1dB 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB 802.11b RADIO OPERATING FREQUENCY 2412-2462 MHz TX SPECIFICATIONS RX SPECIFICATIONS DataRate TX Power Tolerance DataRate Sensitivity 1Mbps 28 dBm +/-1dB 1Mbps -97 dBm 2Mbps 28 dBm +/-1dB 2Mbps -96 dBm 5.5Mbps 28 dBm +/-1dB 5.5Mbps -95 dBm 11Mbps 28 dBm +/-1dB 11Mbps -92 dBm 28 28 28 28 28 24 23 22 dBm dBm dBm dBm dBm dBm dBm dBm +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB +/-1dB 802.11g OFDM 802.11g OFDM 802.11b Wireless Approvals RoHS Compliance 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps -94 -93 -91 -90 -86 -83 -77 -74 dBm dBm dBm dBm dBm dBm dBm dBm RANGE PERFORMANCE Outdoor (BaseStation Antenna Dependent): Over 15km PHYSICAL / ELECTRICAL / ENVIRONMENTAL Enclosure Size Weight Enclosure Characteristics Mounting Kit Max Power Consumption Power Supply Power Method Operating Temperature Operating Humidity Shock and Vibration 12 in. length x 4 in. height x 1in. Width 0.9kg Outdoor UV Stabalized Plastic Pole Mounting Kit included 4 Watts 12V, 1A (12 Watts). Supply and injector included Passive Power over Ethernet (pairs 4,5+; 7,8 return) -20C to +70C 5 to 95% Condensing ETSI300-019-1.4 SOFTWARE visit www.ubnt.com/airos COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. INDUSTRY CANADA This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 3 Producer : Mac OS X 10.5.4 Quartz PDFContext Create Date : 2008:09:22 20:38:02Z Apple Keywords : Subject : Modify Date : 2008:09:24 11:18:22-07:00 Author : robert Title : b2_guide.graffle Creator : OmniGraffle ProfessionalEXIF Metadata provided by EXIF.tools