Ubiquiti B5 High Performance 802.11b/g outdoor point to point device User Manual b5 guide graffle

Ubiquiti Networks, Inc. High Performance 802.11b/g outdoor point to point device b5 guide graffle

Guide

B5 USER GUIDE
DataRate Power Tolerance DataRate Sensitivity Tolerance6Mbps 24 dBm +/-1.5dB 6Mbps -94 dBm +/-1.5dB9Mbps 24 dBm +/-1.5dB 9Mbps -93 dBm +/-1.5dB12Mbps 24 dBm +/-1.5dB 12Mbps -91 dBm +/-1.5dB18Mbps 24 dBm +/-1.5dB 18Mbps -90 dBm +/-1.5dB24Mbps 26 dBm +/-1.5dB 24Mbps -86 dBm +/-1.5dB36Mbps 22 dBm +/-1.5dB 36Mbps -83 dBm +/-1.5dB48Mbps 21 dBm +/-1.5dB 48Mbps -77 dBm +/-1.5dB54Mbps 19 dBm +/-1.5dB 54Mbps -74 dBm +/-1.5dB802.11a OFDM802.11a OFDMRANGE PERFORMANCETX SPECIFICATIONSRX SPECIFICATIONSOutdoor (BaseStation Antenna Dependent):Over 10km Wireless ApprovalsFCC Part 15.247, IC RS210, CERADIO OPERATING FREQUENCY 5.745-5.825GHzSYSTEM INFORMATIONProcessor SpecsAtheros AR2313 SOC, MIPS 4KC, 180MHzMemory Information16MB SDRAM, 4MB FlashNetworking Interface10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceRoHS ComplianceYESREGULATORY / COMPLIANCE INFORMATIONSOFTWARE12V, 1A (12 Watts).Operating Temperature -20C to +70COperating Humidity5 to 95% CondensingShock and VibrationPower SupplyPHYSICAL / ELECTRICAL / ENVIRONMENTALEnclosure Size26.4 cm x 8 cm x 3cmWeight0.4kgETSI300-019-1.4visit www.ubnt.com/airos Enclosure CharacteristicsOutdoor UV Stabalized PlasticMounting KitPole Mounting Kit includedPower MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Max Power Consumption5 Watts
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The antennas used for this transmitter must be installed to provide a separation operating in conjunction with any other antenna or transmitter. ! INDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! distance of at least 193cm from all persons and must not be located or

Navigation menu