Ubiquiti M5L 802.11n radio User Manual user guide

Ubiquiti Networks, Inc. 802.11n radio user guide

User Manual

M5LOEM Users Guide
TECH SPECSDataRate Avg. TX Tolerance DataRate Sensitivity Tolerance1-24Mbps 23 dBm +/-2dB 24Mbps -83 dBm +/-2dB36Mbps 21 dBm +/-2dB 36Mbps -80 dBm +/-2dB48Mbps 19 dBm +/-2dB 48Mbps -77 dBm +/-2dB54Mbps 18 dBm +/-2dB 54Mbps -75 dBm +/-2dBMCS0 23 dBm +/-2dB MCS0 -96 dBm +/-2dBMCS1 23 dBm +/-2dB MCS1 -95 dBm +/-2dBMCS2 23 dBm +/-2dB MCS2 -92 dBm +/-2dBMCS3 23 dBm +/-2dB MCS3 -90 dBm +/-2dBMCS4 22 dBm +/-2dB MCS4 -86 dBm +/-2dBMCS5 20 dBm +/-2dB MCS5 -83 dBm +/-2dBMCS6 18 dBm +/-2dB MCS6 -77 dBm +/-2dBMCS7 17 dBm +/-2dB MCS7 -74 dBm +/-2dBMCS8 23 dBm +/-2dB MCS8 -95 dBm +/-2dBMCS9 23 dBm +/-2dB MCS9 -93 dBm +/-2dBMCS10 23 dBm +/-2dB MCS10 -90 dBm +/-2dBMCS11 23 dBm +/-2dB MCS11 -87 dBm +/-2dBMCS12 22 dBm +/-2dB MCS12 -84 dBm +/-2dBMCS13 20 dBm +/-2dB MCS13 -79 dBm +/-2dBMCS14 18 dBm +/-2dB MCS14 -78 dBm +/-2dBMCS15 17 dBm +/-2dB MCS15 -75 dBm +/-2dBSYSTEM INFORMATIONProcessor SpecsAtheros MIPS 24KC, 400MHzMemory Information32MB SDRAM, 8MB FlashNetworking Interface1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet InterfaceREGULATORY / COMPLIANCE INFORMATIONWireless ApprovalsFCC Part 15.247, IC RS210, CERoHS ComplianceYES OPERATING FREQUENCY 5470MHz-5825MHz 5GHz TX POWER SPECIFICATIONS5GHz RX SPECIFICATIONS 11a 11a5GHz 11n / AirMax 5GHz 11n / AirMax PHYSICAL / ELECTRICAL / ENVIRONMENTALEnclosure Size445 x 416 x 34mmWeight3.82kgEnclosure CharacteristicsOutdoor UV Stabalized PlasticMounting KitPole Mounting Kit includedMax Power Consumption5.5 WattsPower Supply24V, 0.5A surge portection integrated POE adapter includedPower MethodPassive Power over Ethernet (pairs 4,5+; 7,8 return)Operating Temperature -30C to +80COperating Humidity5 to 95% CondensingShock and VibrationETSI300-019-1.4
COMPLIANCE INFORMATION FCC Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ! The internal 13dBi antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be located or operating in conjunction with any other antenna or transmitter. ! INDUSTRY CANADAThis Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à! la norme NMB-003 du Canada. ! Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. !! To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.! This equipment is required to be professionally installed

Navigation menu