Ubiquiti UAPSTMXG UniFi StadiumXG User Manual UniFi Stadium XG AP Quick Start Guide
Ubiquiti Networks, Inc. UniFi StadiumXG UniFi Stadium XG AP Quick Start Guide
Ubiquiti >
Contents
User Manual BK Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3701475 |
| Application ID | eHnG9x+Sami0k53FNAKdrQ== |
| Document Description | User Manual BK Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 366.94kB (4586797 bits) |
| Date Submitted | 2018-01-03 00:00:00 |
| Date Available | 2018-07-03 00:00:00 |
| Creation Date | 2017-12-13 16:58:28 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2017-12-29 19:44:31 |
| Document Title | UniFi Stadium XG AP Quick Start Guide |
| Document Creator | Adobe InDesign CC 2017 (Macintosh) |
| Document Author: | J Lee |
Quad-Radio 802.11ac Wave 2 Access Point with Dedicated Security and Beamforming Antenna Model: UAP‑StadiumXG-BK Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Quad‑Radio 802.11ac Wave 2 Access Point with Dedicated Security and Beamforming Antenna. This Quick Start Guide is designed to guide you through installation and includes warranty terms. IMPORTANT: The UAP‑StadiumXG requires the UniFi Controller v5.7 or higher, available at: www.ubnt.com/download/unifi Package Contents UniFi Stadium XG AP Pole Clamp Adjustment Bracket Carriage Bolts (Qty. 4) Flange Nuts (Qty. 4) Quad-Radio 802.11ac Wave 2 Access Point with Dedicated Security and Beamforming Antenna Model: UAP-StadiumXG-BK Lag Screws (Qty. 4) Gigabit PoE (50V, 1.2A) Power Cord Quick Start Guide TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is designed for outdoor installations. It is the professional installer’s responsibility to follow local country regulations, including operation within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements. Installation Requirements • 13 mm wrench • Cat5/6 UTP cable Note: The UAP‑StadiumXG must only be installed indoors. Due to its black color, it can potentially overheat if installed outdoors. System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Java Runtime Environment 1.8 or above recommended • Web Browser: Google Chrome (Other browsers may have limited functionality.) • UniFi Controller software v5.7 or newer (available at: www.ubnt.com/download/unifi) Network Topology Requirements • A DHCP-enabled network (for the AP to obtain an IP address as well as for the wireless clients after deployment) • A UniFi Cloud Key or management station running the UniFi Controller v5.7 (or newer) software, located either on-site and connected to the same Layer 2 network, or off-site in the cloud or NOC UniFi Hybrid Cloud Install CURRENT SITE 25 msec LATENCY 22 59 54 116 WAN 118 0.2 0.94 0.01 200+ 229 LAN 413 admin WLAN ACTIVE DEVICE Inactive Pending 2.33 700+ Mbps THROUGHPUT UAP-StadiumXG USERNAME Default 0.9 118 ACTIVE DEVICES Inactive Pending ACTIVE DEVICES Inactive Pending SPEED TEST DOWNLOAD THROUGHPUT & LATENCY DEVICES ON 2.4 GHZ CHANNEL 10 200 150 Latency [msec] Throughput [Mbps] 250 100 500 24 HRS 12 HRS NOW Avg/Max Throughput 36 100 40 44 48 52 10 56 60 120 124 UAP-StadiumXG 11 64 10 80 60 40 200 24 HRS 12 HRS DEVICES NOW Latency [msec] Throughput [Mbps] DEVICES ON 5 GHZ CHANNEL Latency UPLOAD THROUGHPUT & LATENCY WLAN LAN WAN 118 100 132 CLIENTS 126 DEVICES 104 136 108 140 112 144 116 149 153 157 128 161 165 DEEP PACKET INSPECTION 1172 CLIENTS Motorola Lenovo SamsungE Dell Acer Other 258 241 220 213 130 110 645 GB TRAFFIC Network Protocols Streaming Media Web / Web 2.0 File Transfer Social Network Other 582 GB 23.3 GB 22.7 GB 8.47 GB 3.6 GB 5.46 GB UAP-XG US-16-XG LAN USG-XG-8 (DHCP Server) WAN Internet Remote Access to UniFi Controller Sample Network Diagram All UniFi devices support off-site management controllers. For setup details, see the User Guide on the website: www.ubnt.com/download/unifi Hardware Overview Top View Lanyard Loop Mounting Bolt Elevation Lock Bolt Adjustment Bracket Pole Clamp LED The RGB LED is set to the factory defaults below; however, the color and lighting pattern are software-controllable. LED Color Status White Factory default, waiting to be integrated. Flashing White Initializing. Alternating White/Blue Device is busy; do not touch or unplug it. This usually indicates that a process such as a firmware upgrade is taking place. Blue Indicates the device has been successfully integrated into a network and is working properly. This is used to locate an AP. Quickly Flashing Blue When you click Locate in the UniFi Controller software, the AP will flash. It will also display the location of the AP on the map. Steady Blue Indicates the device is in an isolated state with Occasional (all WLANs are brought down until an Flashing uplink is found). Ports 10 GbE Port 1 GbE Port Reset Button 10 GbE The 10 GbE port is a 1/10 Gbps Ethernet port used to connect to the LAN and DHCP server. It can also be used to connect the power. Note: The UAP‑StadiumXG can be powered using an 802.3bt PoE switch or the included Gigabit PoE adapter. For instructions, see Powering the UniFi AP. 1 GbE The 1 GbE port is a 10/100/1000 Ethernet port used for bridging. It can also be used to connect the power. Reset The Reset button serves two functions for the UAP‑StadiumXG: • Restart Press and release the Reset button quickly. • Restore to Factory Default Settings Press and hold the Reset button for more than five seconds. VESA Mounting If you choose to use your own mount, remove the four M4 x 10 screws from the back of the UAP‑StadiumXG and detach the pre-installed mount. The 8-hole mounting pattern on the back of the UAP‑StadiumXG follows the VESA MIS-D standard and can be used with mounts that comply with this standard. Use either the 100 x 100 mm or 75 x 75 mm square hole pattern with M4 x 10 screws. 75 mm 100 mm *640-00366-01* 640-00366-01 Hardware Installation The UAP‑StadiumXG can be mounted on a pole or wall. Proceed to the appropriate instructions for your installation. Note: The UAP‑StadiumXG must only be installed indoors. Due to its black color, it can potentially overheat if installed outdoors. Pole Mount 1. Attach the Pole Clamp to the Adjustment Bracket. a. Hold the Adjustment Bracket with its clamps facing you. b. Insert the Carriage Bolts through the rectangular holes of the Adjustment Bracket. c. Slide the single hole of the Pole Clamp over the corresponding Carriage Bolt. d. Place one Flange Nut on each bolt. Pole Clamp Hole 2. Mount the Adjustment Bracket on the pole and secure it. a. Place the Adjustment Bracket against the pole. b. Slide the three slots of the Pole Clamp over the corresponding Carriage Bolts. c. Tighten the Flange Nuts of the bolts to 25 N · m to secure the Adjustment Bracket to the pole. 25 N · m Note: The mounting assembly can accommodate a Ø 25.4 - 50.8 mm pole. 3. Loosen and remove the Elevation Lock Bolts on the UAP‑StadiumXG. (The lanyards will retain the bolts.) 4. Lift the UAP‑StadiumXG and align the Mounting Bolts with the slots on the Adjustment Bracket. Seat the Mounting Bolts in the slots. 5. Insert the Elevation Lock Bolts into the adjustment slots. Remove the lanyards and then tighten the bolts by hand. 6. Pivot the UAP‑StadiumXG until it reaches the desired elevation angle (+10 to -50°). Then tighten all bolts. ° 10 50° 7. Proceed to Connecting Ethernet. Wall Mount To mount the UAP‑StadiumXG on a wall, securely attach the Adjustment Bracket to the wall using the four Lag Screws. Note: The Adjustment Bracket must attach directly to a stud or other structurally stable surface. 1. Locate the stud. 2. Position the Adjustment Bracket on the stud, ensuring at least two circular holes are centered on the stud. 3. Mark all four circular holes on the wall. 4. Drill pilot holes as necessary. 5. Secure the Adjustment Bracket to the wall with four fasteners. 6. Loosen and remove the Elevation Lock Bolts on the UAP‑StadiumXG. (The retaining lanyards will constrain the bolts.) 7. Lift the UAP‑StadiumXG and align the Mounting Bolts with the slots on the Adjustment Bracket. Seat the Mounting Bolts in the slots. 8. Insert the Elevation Lock Bolts into the adjustment slots. Remove the lanyards and then tighten the bolts by hand. 9. Pivot the UAP‑StadiumXG until it reaches the desired elevation angle (+10 to -50°). Then tighten all bolts. ° 10 50° -50 -40 -30 -20 -10 10 10. Proceed to Connecting Ethernet. Connecting Ethernet Note: If you are using TOUGHCable, we recommend attaching the TOUGHCable Connector(s) after you insert the cable(s) into the grommet. 1. Rotate the grommet cover counterclockwise to remove it. 2. Remove the plug from the grommet. 3. Rotate the grommet sleeve counterclockwise to remove it.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : J Lee Create Date : 2017:12:13 16:58:28-08:00 Modify Date : 2017:12:29 19:44:31+08:00 Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30 Format : application/pdf Title : UniFi Stadium XG AP Quick Start Guide Rights : © 2017 Ubiquiti Networks, Inc. All rights reserved. Subject : UniFi Access Point, UAP-StadiumXG, UAP-StadiumXG-BK, Ubiquiti Networks Creator : J Lee Metadata Date : 2017:12:29 19:44:31+08:00 Creator Tool : Adobe InDesign CC 2017 (Macintosh) Instance ID : uuid:98177fd9-648b-4c21-877f-2adb9c737104 Original Document ID : xmp.did:F77F11740720681180839ACE20804D07 Document ID : xmp.id:997666b1-9a65-4d6c-bc36-f4e86f71390e Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:29c545f7-8a4d-4ff5-ba66-67990119de5b Derived From Document ID : xmp.did:80eb8026-8831-4c2f-9457-f4374c7ceb70 Derived From Original Document ID: xmp.did:F77F11740720681180839ACE20804D07 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Macintosh) History Changed : / History When : 2017:12:13 16:58:28-08:00 Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : SinglePage Page Count : 16EXIF Metadata provided by EXIF.tools