Uni Art Precise ABH802-AT0-1-N Bluetooth Headset User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2157069
Application ID	Gb7/XBhELf6ujjKn1SHhjg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	80.64kB (1007957 bits)
Date Submitted	2014-01-03 00:00:00
Date Available	2014-01-03 00:00:00
Creation Date	2013-08-15 10:05:18
Producing Software	Corel PDF Engine Version 15.0.0.486
Document Lastmod	2013-08-15 10:05:18
Document Title	Users Manual
Document Creator	CorelDRAW X5
Document Author:	胡玲

Product Introduction
Note:
Dear customer :
1. When pair with the mobile phone ,function available
Thank you for purchasing our high quality electronic
of the headset may change according to type of the
product. This product uses international advanced
mobile phone.
Bluetooth wireless audio transmission technology,
2. Some of the equipments , especially those without the
which has stable signal ( high frequency modulation,
Bluetooth Technology Alliance (SIG) testing or approval,
easily to avoid other signal interference), stereo Hi-
may not be compatible with this product.
Fi sound quality, strong versatility etc..
The scope of product: audio devices with Bluetooth ,
including PC, mobile phone, MP3, notebook , etc..
Product Overview
Accessories list:
Use instructions
Warranty card
1 . USB c harging cable
2. The LINE IN line
3. Bluetooth headset
Bluetooth headset
The LINE IN line
Charging cable
On
Turn on the headset by pressing the Power button until the blue
light flash,and it will be on the pair condition.
play / pause
LED
power
Off
Turn off the headset by pressing the Power button until the
blue light shuts down.
Pair
You must establish the connection between the headset and
If the mobile device support Bluetooth and has a music player ,
a compatible device by pairing before you can start using.
you can play music by the headset .
A. Ensure that the mobile device or a music player is on and
and then establish a connection.
the headset is closed.
E . When the headset is connected to the device and ready
B. Open the headset,it will enter pairing mode, the blue
for use, the blue light is on for the whole time.
light starts to flash quickly.
F. If you want to disconnect the connection between the
C.Use device Bluetooth function, begin to search for Bluetooth
headset and device or pair it with other device , you can
devices, select "ABH802" headsets from the list of devices.
press the power button until the blue light slow flash and
D. If necessar y, please enter the password 0000 to pair the
disconnected with device; the other device can be paired.
then loose the power button .This time ,the headset is
headset. For some of the devices , you may need to match,
The operation and function
In order to achieve the
most ideal effect,slip
each one direction on
Operation:
For ward/Backward: Slip left or right on sensor board.
the sensor board for
2/3 length.
Play / Pause: Press the play / pause button or click the
sensor board twice.
Volume Up/ Down: Slip up or down to increase/ reduce the
volume.When you want to continue increasing/ reducing the
volume,slipe sensor board up/down for 2/3 length and then
hold it.
Answer : Press the play / pause button or click the sensor
board twice.when you don`t want to answer the call,press
the play / pause for 3 seconds.
Hung: Press the play / pause button or click the sensor
board twice after finishing the call.
LINE IN function : When the USB MIRCO is connected
to the audio line (3.5MM TO USB MIRCO B/M), it will
automatically disconnect Bluetooth function and
change to LINE IN, used as a wired headset.
Headset reset function:If the headset stop working,
you need to reset the headset, please connect the
headset to a charging wire /adapter , then it will reset
successfully;If it is in working , when you connect it
to a charging wire /adapter ,the headset
click twice
will automatically shut down, at this time please reset
it for normal work .
Low batter y alarm function: When the batter y power is low,
the headset will issue a "beep" sound warning to turn off the
headset.
NFC
Automatically turn off function: If the headset is not
connected with any equipment in about 10 minutes, it
will automatically shut down for power saving.
NFC function: Mobile phone itself must have the function
of NFC. Put mobile phone to the left side of ABH802 NFC
region. If successfully connected, it will issue a“du”
sound and shows the connection is successful on the
phone. If you want to disconnect the headset,then put
it again to the mobie phone NFC region,then they will
disconnect.
Wearing
3 0±1 mm
When wearing headset, please pay attention to distinguish
Headset on both sides has a telescopic headband design, you
between left and right side of the headband.
can adjust the headband length for more comfortable .Stretch
length was 30 ± 1mm.
Warning: Using the headset will weaken your ability to hear outside sounds. Therefore, please do not use
headset in the condition which may threaten your safety .
Charging
When it is charging , the green lights.
Note:
When the charging is completed, the green indicator light
The headset is built with non removable and rechargeable
is extinguished, charging adapter/wire can be removed.
batter y inside, do not remove the batter y or so as not to damage
the headset .
If the batter y is completely run out , it may take several
minutes for charging light to indicate the state of charge;
When charging for first time ,it should be charged for more
than 4 hours and less than 8 hours, which can activate the
When the charging cable is not in use, please disconnect it
batter y in best status. After that, charging only needs 2-3
with the device. Excessive charging will shorten batter y life.
hours (do not charge more than 24 hours, or it will damage
If you have a fully charged batter y without using ,
the batter y life)
the batter y will discharge by itself after a period of time;
The headset can be used when charging .
U SB
Safety
In order to obtain the best sound effects, please pay attention to distinguish between left and right side of the headband.; do not
disassemble the hardware; use dr y and soft cotton to clean the headset etc.
We recommend you take the following preventive measures to prevent hearing loss :
If the volume is too large, may cause hearing loss.Adjust the appropriate volume from the minimum, increase slowly until the sound
is comfortable, clear and without distortion.
If in a comfortable volume, you have tinnitus or discomfort , please turn down the volume or stop to listen and check the hearing status.
Warning: Wireless transmission will produce electromagnetic signal, please pay attention to use the headphone when you have cardiac
pacemaker or related auxiliar y instrument.
Troubles
A: Not successfully matched :
B.Cannot listen to music or call by headset:
1. Confirm the connection device with Bluetooth function has
1. Increase the headset volume;
been opened and work ;
2. Confirmed the device has been successfully connected.
2. Check whether the headset batter y power is insufficient;
3. Do not open the too many Bluetooth headsets or Bluetooth
devices at the same time, to prevent interference;
4. Confirm the headset is in pairing state and input Bluetooth
headset the password correctly;
5. If the above method still can not solve this problem,reset
the headset, pair it by description.
Specifications
1. Connecting way:Bluetooth&Line In
2. Bluetooth® :Bluetooth V4.0
3. Transmission Mode :GFSK
4. Operating voltage:3.7V
5. Signal-to-noise ratio : > 80dB
6. THD : < 1%
7. Frequency response :30Hz-20KHz
8. Technical :guesture recognition ,AAC,apt-X,DSP,NFC;
Features
1. Near Field Communication(NFC) function for connecting more convenient
2. Built-in CVC echo cancellation,double mic and DSP Noise reduction :clear communication
3. Display headset's batter y on the iPhone ,IPad,IPod
4. Supports Aptx and AAC(optional) for sound enhancement
5. Folding design, easy to take with you
6. APT-X Hi-Fi: Playing stereo music
7. Embedded microphone for hands-free conversation from Bluetooth-enabled cell phones
8. Pause the music & Play back automatically when receives an incoming call
9. Automatically connect to the last connected Bluetooth device
10. Micro USB connector charging via AC charger or computer USB port
11. 3.5mm Line in jack allows headset to work without batter y
广州雅天科技有限公司
ARTISTE TECHNOLOGY LTD.
ADD: No. 6 Building, 173#, Dunhe Road, Haizhu
District, Guangzhou City, Guangdong Province, China
Telephone: +86-020-66319168
Mobile Phone: +86-13450 382195
Web: http://artiste.en.alibaba.com/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 10
Create Date                     : 2013:08:15 10:05:18+08:00
Modify Date                     : 2013:08:15 10:05:18+08:00
Producer                        : Corel PDF Engine Version 15.0.0.486
Author                          : 胡玲
Creator                         : CorelDRAW X5
Title                           : abs802说明书英文版2.cdr

EXIF Metadata provided by EXIF.tools