Uni Art Precise SP4592-001R WIRELESS STEREO 900MHz SPEAKER SYSTEM User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1478865
Application ID	y1nGSOaptfiJz/0Zr1qkbQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.52kB (219004 bits)
Date Submitted	2011-06-07 00:00:00
Date Available	2011-06-07 00:00:00
Creation Date	2011-06-03 12:00:39
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-06-03 12:00:39
Document Title	Microsoft Word - SP4590 - User Manual - 20110524.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

SP4590
Wireless Stereo 900MHz
Speaker System
User’s Manual
Please read before using the equipment
INTRODUCTION
This 900 MHz stereo wireless speaker system uses latest wireless technology that
enables you to enjoy music and TV sound anywhere inside or outside your home.
You can simply connect the system to any audio source such as Radio, TV, VCR,
Hi-Fi and iPod/CD/MP3/VCD/DVD player.
Without complicated wiring and
installation with your Audio/Video equipments and rear channel amplifier, the
system enables you to enjoy thrilling, lifelike sound stereo in minutes.
FEATURES
Automatic Phases Lock Loop (PLL) scanning system on speaker receivers
Phase Lock Loop (PLL) transmission system on transmitter
863 MHz RF technology panel-like speaker systems.
RF technology lets you roam freely throughout your house.
Operating distance up to 150 feet
No line of sight limitation.
Virtually interference free stereo quality.
ALC and auto ON/OFF control.
Auto tuning function.
Stereo (L and R) and Mono Selection
Remote Control
PACKAGE INCLUDES
1 x Transmitter
1 x AC/DC 8V 200mA Power Adaptor for Transmitter
2 x Speakers
2 x AC/DC 9V 1.2A Power Adaptor for Speakers
1 x 1.5M Long Audio Cable
1 x Short "Y-Cord" RCA Adapter Cable.
COMPONENT IDENTIFICATION
TRANSMITTER
SPEAKER RECEIVERS
REMOTE CONTROL
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Power LED Indicator
Signal LED Indicator
Audio In
Channel Selector
DC In For Transmitter
InfraRed Receiver
Volume Up
Volume Down
Tune
Power On/Off
Power/Signal LED Indicator
Battery Compartment
Left / Mono / Right
DC In For Speaker
Power On/Off
Volume Up
Tune
Volume Down
Mute
Lanyard Ring
INSTALLATION
TRANSMITTER
1.
Plug the supplied 8V AC/DC power adaptor in the DC jack located on the rear of the transmitter.
2.
Connect the supplied 8V AC/DC power adaptor to an electrical wall outlet.
The Power LED
then glows.
3.
The transmitter can be connected to audio output jack of TV, Monitor, VCR, Radio, CD,
MP3/iPod, VCD or DVD players with the cables provided.
Having finished the above simple wiring, Signal LED glows when the transmitter detects audio input
signal played from the source.
SPEAKER RECEIVERS
1.
Remove the door of the battery compartment.
2.
Insert 6 pieces of ‘AA’ size ALKALINE batteries into the battery compartment with correct polarity
under the speakers, then replace the door of battery compartment, or connect the provided
AC/DC 9V Adaptor to the DC input jack under the speakers, then plug it to the wall AC outlet.
REMOTE CONTROL
1.
Remove the door of the battery compartment.
2.
Insert 2 x AAA 1.5V batteries(not included) into the compartment.
OPERATION
1.
Turn on the audio source to which the transmitter is connected with. The Signal LED on
transmitter will light up.
2.
Select a channel of the transmitter for best performance in your location.
3.
Select the L/M/R (Left/Mono/Right) selector under the speakers, one to L (Left) and the other to
R (Right) for the best stereo reception. In case the audio device only provides Mono audio signal,
select to M (Mono) for the best mono reception.
4.
Press the “POWER” button on the speaker to turn on the speaker.
get the best tuning reception in the speakers.
Press the “TUNE” button to
When the button is pressed, frequency tuning
starts automatically and it stops when a signal is detected.
5.
Volume can be adjusted up from the speaker by pressing “
button “
6.
” button or down by pressing the
“, or by pressing “ + “ or “ – “ on the remote control, to the desired listening level.
Tuning
a)
Keep a distance of 7 meters between speaker and transmitter, and then press the button
“ TUNE “ button for best tuning reception.
b).
Once the frequency is jammed, select another channel on the transmitter, then press
“ TUNE “ button again.
7.
Switching Off
a)
For protection of the transmitter and power saving, the transmitter will cut off
automatically if there is no/weak operation input signal from audio source for 4 minutes. In
other words, if the signal comes back, the transmitter will work again automatically.
b)
Press the “POWER” button to turn off the speaker and the LED light goes off.
NOTE :
You should now be able to place the speakers freely from room to room without disruption.
If
disruption should occur (signal breaks up), press the “TUNE” button under the speakers to maximize
best reception.
If you hear interference from other components, switch the channel control of transmitter, and then
move the speakers to other free location.
You can re-adjust the tuning control by moving it among
channels of the transmitter, then pressing “TUNE” button of the speakers for best reception.
When transmitting / receiving over long distances, the signal from the system will become weaker.
TROUBLE SHOOTING
NO SOUND
Ensure the AC adaptor is fully inserted into the AC outlet and the power connection input on the
transmitter.
Ensure the speaker is switch ON.
Speaker’s battery capacity is too low, replace with new batteries or connect the AC adaptors to
the speakers.
Ensure the TV or audio component is ON.
The connected audio / video equipment is not playing.
The volume of speaker is too low, adjust the volume to an appropriate level.
Start playing the equipment.
DISTORTED
Press the “TUNE” button under the speakers until the frequency between the transmitter and
speakers are matched.
Change the position of the channel selector on the transmitter.
You must then press the
“TUNE” button on the speakers.
Battery capacity is too low.
Ensure the volume level of speakers is adjusted properly.
The speaker is too far away from transmitter, move them closer.
The input level of the audio signal is too low.
equipment.
Replace with the new battery.
Turn up the volume of the audio source
TECHNICAL SPECIFICATIONS
Transmission Mode
: UHF stereo
Carrier Frequency
: 900 MHz
Operation Voltage
: Transmitter, AC/DC 8V 200mA Power Adaptor
Speaker, AC/DC 9V 1.2A Power Adaptor, or
6 X ‘AA’ size Alkaline Batteries (not included)
Remote Control, 2 x AAA battery (not included)
Frequency Response
: 40Hz – 12KHz
Distortion
: 1.5%
S/N Ratio
: 65dB
Channel Separation
: 30dB
Operation Distance
: Up to 150 feet (open area)
Output Power
: 2 x 4W (RMS)
WARNING : Batteries (battery pack or batteries installed) shall not be exposed to excessive heat
such as sunshine, fire or the like.
FCC STATEMENT:
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
IC STATEMENT:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment。
This device complies with RSS 210 of Industry Canada.
"Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2)
this device must accept any interference, including interference that may cause undesired
operation of the device."
This Class B digital apparatus complies with Canadian ICES-003."
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2011:06:03 12:00:39+08:00
Create Date                     : 2011:06:03 12:00:39+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SP4590 - User Manual - 20110524.doc
Creator                         : Administrator
Document ID                     : uuid:c1a4ca6d-a5b4-4f03-848a-1428f3a32789
Instance ID                     : uuid:1308726b-3ea6-47c1-a826-e8260f9ac655
Page Count                      : 9
Author                          : Administrator

EXIF Metadata provided by EXIF.tools