Uni Art Precise SP4892-001R 900 MHz Wireless Speaker User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1691627
Application ID	D06d3gWkqONXP+pPJ/yIrw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.73kB (634186 bits)
Date Submitted	2012-05-07 00:00:00
Date Available	2012-05-07 00:00:00
Creation Date	2012-04-25 16:03:32
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-05-04 22:48:51
Document Title	Microsoft Word - SP4890 - User_Manual - 20120425.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

SP4890
Wireless Stereo 900MHz
Speaker System
User’s Manual
Please read before using the equipment
INTRODUCTION
This 900 MHz stereo wireless speaker system uses latest wireless technology that
enables you to enjoy music and TV sound anywhere inside or outside your home.
You can simply connect the system to any audio source such as Radio, TV, VCR,
Hi-Fi
and
iPod/iPhone/Smart
Phone,
and
CD/MP3/VCD/DVD.
Without
complicated wiring and installation with your Audio/Video equipments and rear
channel amplifier, the system enables you to enjoy thrilling, lifelike sound stereo in
minutes.
FEATURES
Phase Lock Loop (PLL) transmission system on product.
900 MHz RF technology stereo speaker systems.
RF technology lets you roam freely throughout your house.
Operating distance up to 150 Feet (open area)
No line of sight limitation.
Virtually interference free stereo quality.
ALC and RF transmission auto ON/OFF control.
Auto tuning function.
PACKAGE INCLUDES
1 x Transmitter
1 x AC/DC 8V 200mA Power Adaptor for Transmitter
2 x Speakers
2 x AC/DC 9V 1.2A Power Adaptor for Speakers
1 x Audio Cable (RCA male to 3.5 mm stereo male plug)
1 x Short "Y-Cord" RCA Adapter Cable.
COMPONENT IDENTIFICATION
TRANSMITTER
SPEAKER RECEIVERS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Power LED Indicator
Signal LED Indicator
Audio In
Channel Selector
DC In For Transmitter
Power On/Off
Tune
Volume Down
Volume Up
Battery Door Lock
Battery Door
DC In, with rubber Cover
Power/Signal LED Indicator
INSTALLATION
TRANSMITTER
1.
Plug the supplied 8V AC/DC power adaptor in the DC jack located on the rear of the transmitter.
2.
Connect the supplied 8V AC/DC power adaptor to an electrical wall outlet.
The Power LED
then glows.
3.
The transmitter can be connected to audio output jack of TV, Monitor, VCR, Radio, CD,
MP3/iPod/iPhone, Smart Phone, VCD or DVD players with the cables provided.
Having finished the above simple wiring, Signal LED glows when the transmitter
detects audio input signal played from the source.
SPEAKER RECEIVERS
1.
Remove the Battery Door by pushing the Battery Door Lock.
2.
Insert 6 pieces of ‘AA’ size ALKALINE batteries into the
battery compartment with correct polarity under the speakers,
then replace the door of battery compartment, or connect the
provided AC/DC 9V Adaptor to the DC input jack under the
speakers, then plug it to the wall AC outlet. Note that this
Speaker will not charge any batteries.
OPERATION
1.
2.
3.
4.
5.
6.
Turn on the audio source to which the transmitter is connected with. The Signal LED on
transmitter will light up.
Select a channel of the transmitter for best performance in your location.
Press the “POWER” button on the speaker to turn on the speaker. Press the “TUNE” button to
get the best tuning reception in the speakers. When the button is pressed, frequency tuning
starts automatically and it stops when a signal is detected.
Volume can be increased from the speaker by pressing “ + ” button or decreased by pressing the
button “ – “.
Tuning
a)
Keep a distance of approximately 23 feet between speaker and transmitter, and then
press the button “ TUNE “ button for best tuning reception.
b).
Once the frequency is jammed, select another channel on the transmitter, then press
“ TUNE “ button again.
Switching Off
a)
For protection of the transmitter and power saving, the transmitter will cut off
automatically if there is no/weak operation input signal from audio source for 4 about
minutes. In other words, if the signal comes back, the transmitter will work again
automatically.
b)
Press the “POWER” button to turn off the speaker and the LED light goes off.
NOTE :
You should now be able to place the speakers freely from room to room without disruption.
If
disruption should occur (signal breaks up), press the “TUNE” button under the speakers to maximize
best reception.
If you hear interference from other components, switch the channel control of transmitter, and then
move the speakers to other free location.
You can re-adjust the tuning control by moving it among
channels of the transmitter, then pressing “TUNE” button of the speakers for best reception.
When transmitting / receiving over long distances, the signal from the system will become weaker.
TROUBLE SHOOTING
NO SOUND
Ensure the AC adaptor is fully inserted into the AC outlet and the power connection input on the
transmitter.
Ensure the speaker is switch ON.
Speaker’s battery capacity is too low, replace with new batteries or connect the AC adaptors to
the speakers.
Ensure the TV or audio component is ON.
The connected audio / video equipment is not playing.
The volume of speaker is too low, adjust the volume to an appropriate level.
Start playing the equipment.
DISTORTED
Press the “TUNE” button under the speakers until the frequency between the transmitter and
speakers are matched.
Change the position of the channel selector on the transmitter.
You must then press the
“TUNE” button on the speakers.
Battery capacity is too low.
Ensure the volume level of speakers is adjusted properly.
The speaker is too far away from transmitter, move them closer.
The input level of the audio signal is too low.
equipment.
Replace with the new battery.
Turn up the volume of the audio source
TECHNICAL SPECIFICATIONS
Transmission Mode
: UHF stereo
Carrier Frequency
: 900 MHz
Operation Voltage
: Transmitter, AC/DC 8V 200mA Power Adaptor
Speaker, AC/DC 9V 1.2A Power Adaptor, or
6 X ‘AA’ size Alkaline Batteries (not included)
Frequency Response
: 40Hz – 12KHz
Distortion
: 1.5%
S/N Ratio
: 65dB
Channel Separation
: 30dB
Operation Distance
: Up to 150 feet (open area)
Output Power
: 2 x 4W (RMS)
WARNING:
1.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such
as sunshine, fire or the like.
2.
This product shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the product.
3.
Where the mains plug is used as the disconnect device for the product, the disconnect
device shall remain readily operable.
FCC information to the user
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not
harmful interference, and (2) this device must accept any interference received, including interference that may cause
FCCcause
STATEMENT:
undesired operation.
Note:
This equipment
has been
and foundnot
to comply
withapproved
the limits for
Class
B responsible
digital device, pursuant to part 15 of the
FCC Caution:
Any changes
ortested
modifications
expressly
by a
the
party
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This
equipment generates,
and canauthority
radiate radio
frequency
and, if not installed and used in accordance with the
for compliance
could voiduses
the user's
to operate
thisenergy
equipment.
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
This device
complies with Part 15 of the FCC Rules. Operation is subject to the following two
following
measures:
--Reorient or relocate the receiving antenna.
conditions:
(1)separation
This device
may not
harmful
and (2) this device must accept
--Increase the
between
thecause
equipment
and interference,
receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
any interference received, including interference that may cause undesired operation.
--Consult the dealer or an experienced radio/TV technician for help.
Caution: changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
IC STATEMENT:
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment。
This device complies with RSS 210 of Industry Canada.
"Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device."
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
"This Class B digital apparatus complies with Canadian ICES-003."
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter.
Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnant en conjonction
avec une autre antenne ou transmetteur.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2012:04:25 16:03:32+08:00
Modify Date                     : 2012:05:04 22:48:51+02:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2012:05:04 22:48:51+02:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - SP4890 - User_Manual -  20120425.doc
Document ID                     : uuid:5ffe8a3b-2793-45db-9e19-02d028f5db51
Instance ID                     : uuid:ad68ef33-e334-4de1-8e64-e2958911ae4f
Page Count                      : 8

EXIF Metadata provided by EXIF.tools