Uni Art Precise SP492-001R 900MHz Wireless Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	309569
Application ID	+RDZlbpGiGMxIVHS8k3BMg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	28.43kB (355329 bits)
Date Submitted	2003-03-13 00:00:00
Date Available	2003-03-13 00:00:00
Creation Date	2003-01-21 17:05:34
Producing Software	Acrobat 5.0 Scan Plug-in for Windows
Document Lastmod	2003-01-21 17:06:48
Document Title	User Manual
Document Creator	Acrobat 5.0 Scan Plug-in for Windows

WIRELESS STEREO WOODEN PANEL
SPEAKER SYSTEM
1 ' SP49O
(xx Transmitter: SPdQI
‘ Rt‘ceiver: SP4”
Owner’s Manual '
Please read before using the equipment
INTRODUCTION
The qao MHz stereo wireless speaker system uses latest wireless technology
that enables you to enjoy music and TV sound anywhere inside or outside
your home. You can simply connect the system to any audio source such
as Radio, TV, VCR, Hi—Fi and CD/MP3/VCD/DVD player. Without
complicated wiring and installation with your Audio/Video equipments and -
rear channel amplifier, the system enables you to enjoy thrilling, lifelike
sound stereo in minutes.
FEATURES
1. 900 MHz RF technology panel-like Speaker system.
2. Phase Lock Loop (PLL) technology on transmitter.
3. RF technology lets you roam freely throughout your house.
4. Operating distance up to 50 Meters.
5. No line of sight limitation.
6. Virtually interference free stereo quality.
7. ALC and auto ON/OFF control.
8. Auto tuning function.
9. Bass boost function
SPEAKER RECEIVER
Volume ON/OFF
Knob
Normal/Boost Bass
Auto Scan Button
Mb
ii ©
DC Input
Supporting Sland Battery Door
Speaker Panel
Supporting Stand
Power ON Indicator (RED)
INSTALLATION
TRANSMITTER
ll Insert the antenna tube into the antenna wire.
2. Connect the supplied AC power adaptor to an electrical wall outlet.
3, Plug the AC power adaptor in the DC jack located on the rear of the
transmitter,
C) 4. The rear of the transmitter has one audio cord that can be connected to
audio output jack of TV, Monitor, VCR, Radio recorder,
l CD/MP3/VCD/DVD players or to headphone/earphone jack with the
connector provided
Plug the adaptor in the AC source and connect the audio plug to the audio
source. As soon as the transmitter is receiving the audio signal, it will
automatically switch on and the red. LED will illuminate
SPEAKER RECEIVER
1. Insert 6 pieces ‘AA’ size ALKALINE battery into the battery
compartment with correct polarity at the rear of the speaker or connect
the 12V power adaptor to the DC input jack on the rear of each speaker,
then plug it to the wall AC outlet,
2. Switch on the speaker by turning up the VOLUME ON/OFF knob
towards ON direction The
POWER/STEREO LED will light
up. Switch off the speaker by
turning down the VOLUME
ON/OFF knob towards OFF
direction until a “click” sound is
heard
OPERATION
1. Turn on the audio source (TV or audio component) to which the
transmitter is connected with. The LED on transmitter will light up.
2 Select the channel 1 or 2 or 3 of the transmitter for best performance in
your location.
3, Select the MONO/ST selector on the transmitter to ST for the best stereo
reception
* In case the audio device only provides Mono audio signal, select the
MONO/ST selector to MONO for the best mono reception.
4. Turn on the ON/OFF VOLUME knob on the speaker and adjust the
volume to the desired listening level.
5. Push the “SCAN” auto-tuning button to get the best tuning reception in
the speakers. When the button
is pressed, frequency tuning
starts automatically and it stops
when a signal is detected. The
POWER/STEREO LED un'll
change from red to green.
A). Keep a distance of the speaker up to 7 meters apart from transmitter,
and then press “SCA ” auto~tuning button for best tuning reception.
7 mm»
B) Whenever you find frequency jam, move your channel switch from
one channel to the other channel (there are three channels for
selection) on the transmitter, and then press the “SCAN” auto-tuning
button again.
6. The BASS BOOST button can be used to enhance the bass sound
depending on your own music
preferences, Turn bass/boost
effect ON simply by pressing
the button down, and pressing
it once again to OFF.
Note
You should now be able to place the speakers freely from room to room
without disruption. If disruption should occur (signal breaks up), press the
speaker’s “SCAN” auto-tuning button to maximize best reception.
If you hear interference from other components, switch the channel control
of transmitter, and then move the speakers to other free location. You can
re-adjust the tuning control by moving it either charmel l, 2 or 3 of the
transmitter, then pressing “SCAN” auto-tuning button for best reception.
C) When transmitting / receiving over long distances, the signal from the
system will become weaker.
Switching off
ll Turn the VOLUME ON/OFF knob until the click sound is heard to turn
1 off the speaker and the LED
light goes off
2. For protection of the transmitter and power saving, the transmitter will
cut off automatically if there is no/weak operation inth signal from
audio source for 2 minutes.
In other words, if the signal comes back, the transmitter will work
again automatically.
TROUBLE SHOOTING
NO SOUND
Ensure the AC adaptor is fully inserted into the AC outlet and the
power connection input on the transmitter.
- Ensure the speaker is switch ON.
Speaker‘s battery capacity is too low, replace with new batteries or
connect the AC adaptors to the speakers
Ensure the TV or audio component is ON,
The connected audio / video equipment is not playing. Start
playing the equipment.
The volume of speaker is too low, adjust the volume to an
appropriate level.
DISTORTED
Press the “SCAN” button on the speakers until matching the
frequency of the transmitter.
Change the position of the channel selector on the transmitter.
You must then press the SCAN button on the speaker.
Battery capacity is too low. Replace with the new battery.
Ensure the volume level of speakers is adjusted properly.
The speaker is too far from transmitter, move closer.
5 - The input level of the audio signal is too low. Turn up the
volume of the audio source equipment.
SPECIFICATIONS
Transmission Mode : UHF stereo
Carrier Frequency : 966W? “Ito‘s - ‘1-2A’ HHt
Operation Voltage : Transmitter, DC 12V 200rnA
Speaker, 6 X ‘AA’ size Alkaline batteries
or DC 12V 450mA adaptor
Frequency Response : M Zon A rskl—la
Distortion : 1.5%
S/N Ratio : 50dB
Cf) Channel Separation : 30dB
Operation Distance : Up to 50M (Open Area)
Warning : Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment. Operation is subject to
the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of
the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:01:21 17:06:48+08:00
Create Date                     : 2003:01:21 17:05:34+08:00
Creator                         : Acrobat 5.0 Scan Plug-in for Windows
Page Count                      : 9
Mod Date                        : 2003:01:21 17:06:48+08:00
Creation Date                   : 2003:01:21 17:05:34+08:00
Producer                        : Acrobat 5.0 Scan Plug-in for Windows
Metadata Date                   : 2003:01:21 17:06:48+08:00
Has XFA                         : No

EXIF Metadata provided by EXIF.tools