UniData Communication Systems SQ-3000 VoIP Phone User Manual 1

UniData Communication Systems Inc. VoIP Phone 1

User manual

User ManualThis manual includes product specifications and instructions on WiFi phone operation. This manual must be read before operating the product. A WiFi phone access point is required to use this product. Usage of the WiFi access point provided in the full package is recommended.
Battery ReplacementUse ones authorized by the company when you replace batteries, following the figure below.Battery installation method Battery removalIf battery is inserted upside down, WiFi phone will not work. Please turn off the power before removing battery from WiFi phone.(a sudden power off can cause troubles)Battery Replacement
Charge the batteryCharge the battery after purchasing the product as it is not fully charged.Charging with the desktop charger※Lamp on the charger flickers? Separates the battery from the charger, and then, re-fits into the charger. It still flickering? Then, cleans a charging terminal and charges the battery. (When the lamp doesn‟t stop flickering, apply to the service center.Features Charging Charging CompleteCharging Lamp RED GREENTime Taking to Charge / Battery Life
Time Taking to Charge / Battery Life※Battery life varies with the environment temperature, battery age and movement of the user. -Battery life is not permanent-Hours of usage-Lithium ion polymer-WiFiModel Standard ModelCharging time 3 hours 30 minutesBattery life (continuous calling)Voice 6 hoursVideo 3 hoursTime Taking to Charge / Battery LifeSuccessive use time and standby time of batteries are the estimates of the company‟s laboratory, which can be different from the figures in manual depending on the patterns they are used
Insert a micro SD cardInsert / Remove the microSD cardThe brands may be fully compatible with this device :Sandisk, LG, Samsung, Memorette, Transcend Use Only compatible micro SD cards approved by UniDATA for use with this device. UniDATA uses approved industry standards for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card and the device corrupt data stored on the card.The phone supports microSD cards up to 16GB.1. Open the side cover of the microSD.2. Insert the card into the microSD card slot with the contact surface facing down, and press it until it locks into place.3. Close the side cover. Remove the micro SD card1. Make sure that no application is currently accessing the microSD memory card.2. Open the side cover of the microSD.3. Press the microSD card slightly in to release lock, and pull the card out.Important : Do not remove the memory card in the middle of an operation when the card is being accessed. Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on thecard may be corrupted. You can remove or replace the microSD card during phone operation without switching the device off.
If you want to turn on the power,keep pressing for 3 seconds or more. If you want to turn off the power, keep pressing for 3 seconds or more.If abnormal works take place, or the power button does not work while using WiFi phone, start the phone after removing and inserting the battery. Turn on the power after waiting for 5 seconds or more when you restart the phonePower On / Off
Names & Function of Device Parts1 Send KeyUsed for receiving and makingcalls6 Left Selection Key7 Right Selection Key2 End KeyUsed for end a call and to switch the power ON/OFF89 AP Search Key10 Alarm Shortcut11 Using Message function3 Clear KeyRemoving characters or moving to previous screen.12 Calender13 Using user-defined funcion14 Volume Control4 VibratePress and hold to vibrate when you receive a call 15 MIC16 Micro SD Insert hole5 Key LockLock and unlock the keypad.17 Earphone18 Earpiece19 Speaker20 Camera
Signal strengthOut of call coverageCall trial or connectionCall not availableYou have selected the sound setting to bellSetting to mute, displayed when the volume is set to “0”Vibration ModeSilent ModeAn Alarm is setYou have one or more unread messages in the Inbox folderSetting to call forwarding serviceRemaining battery lifeFull Shortage EmptyBeing connected to networkShows that the keys are locked. Key operation is disabledMicroSD card is being accessed Display Indicators
Voice CallsCall ConnectIn standby, enter the numeric keys and then press key※Call quality may become reduced with increased distance away from the access point.Calling Method
Call connectIn standby, enter the numeric keys and then press .※Call quality may become reduced with increased distance away from the access point.Calling MethodVideo Calls
Redialing recently used numbersYou can make voice or video calls by dialing recently used numbers (incoming, outgoing, missed, received/sent text messages). During stand-by, press the SEND key and then select the phone number you want to call. - Select VIDEO in the menu if you want to make a video call.Speed dialingYou can speed dial saved numbers to make calls quickly and easily.During stand-by, press the speed dial number and then press the SEND key to make a call. - Press the VIDEO key to make a video call.Calling MethodCall logs
Number KeyAuto-searchPress a part of the number you want to call to auto-search the phonebook and display the results. Select a phone number and press the OK key. - Press the VIDEO key to make a video call.Calling Method
Making a voice call•Refer to page 21-24.Taking a voice callPress the SEND key to take an incoming call.Press the END key to reject an incoming call.Using the menu during a voice callConvert to video call: Convert the current voice call to a video call without ending the call.Phone book: Search the phone book.Send message: Send a message during a call without ending it.Memo: Write and save a message during a call.( ): This function stops your caller from hearing your voice temporarily. The caller's voice can still be heard.Using the Menu During a Voice Call
Making a video call•Refer to page 21-24.Taking a video callPress the ( ) key when the message “Incoming video call” is displayed.Press the ( ) key to reject the incoming call.Using the menu during a video callConvert to voice call: Converts the current video call to a voice call without ending it.View my picture: Turns off your picture and displays your caller's picture only. (Changes to 'Hide my picture' when your picture is in display.)Phone book: Searches the phone book.Send message: Sends a text message without ending the current call.Memo: Write and save a memo during a call.( ): Select a photo or video to display.Using the Menu During a Voice Call
If you have missed call, press , and the last one of those calls will be answered. To see calls arrived in your absence from the call list, press or and . Missed call
Right select key for shortcutLeft selection key ( Menu > Contacts > Search contacts )Enter a part of a name, phone number or e-mail address to search for a phone number.Search all: Search by a part (more than 1 character) of a name, phone number or e-mail address. Search by letter or digits: Enter letters or digits, then all names starting with these letters/digits will be displayed..Search by group: Select a group to search in (unspecified, standard groups, custom groups).Shortcut key search: Enter a set shortcut number to search for a phone number.Enter the name of the person you want to call and press the View key to call a number saved in the phone book.Press the ( ) key to edit the saved details.Press the ( Send ) key to call a found number.You can search for phone numbers just by pressing ‘Search‟ in standby mode. If you want to call at the phone number selected, press .Phone Book
2. Phone number search –video call1. Press the to make a video call from the phone book you selected.- The phone number selected must be compatible with video calling.- A video call will be converted to a voice call if the dialed number does not support video calling or if the video call receiver is in an area where video calls cannot be made.3. Add new contacts –from phonebook1. Press and select > Add contacts on the Phone Book Menu.Phone Book1. Phone Number Search - Menu (for a saved number)
4. Phone Number Search -DeletePress and select > Delete on the Phone Book menu.Delete a selected number.5. Phone Number Search –Delete AllPress and select > Delete all on the Phonebook menu.Press „Yes‟ after entering the password to delete all saved numbers.- Take note that if you select Delete All, all stored phone numbers stored will be deleted.Check again before deleting as deleted phone numbers cannot be recovered.Phone Book1. Phone Number Search - Menu (for a saved phone number)
Image Save a picture. (Press and select)Name Save a name. (Up to 16 alphabet characters)Group Assign a group.Press ( ) to add a group.Phone Number Save a phone number.Select a main phone number and phone number type.Press the shortcut key to assign a speed dial number.Add number Add a new number.Up to 5 phone numbers can be saved.(Select an icon and press OK to save)E-Mail Address Save an e-mail address.Messenger Save messenger details.Bell Sound Assign a ring tone.Birthday Save a birthday. (Can be saved on the scheduler)Memo Save a memo.Up to 34 Korean characters and 65 alphabet characters can be saved.2. Add new contacts ( Menu > Contacts > Add contacts )Add new phone number and other details.Up to 1,000 phone numbers can be saved.※Each type of phone number can be selected. If more than 2 phone numbers are to be saved, one phone number must be selected as the main phone number.Phone Book
You can add new number in standby mode.Dial a phone number and press SAVE during stand-by to save phone numbers.Phone Book
3. To set speed dial, select ( Menu > Contacts > Speed dial )Set speed dial numbers for phone numbers saved in the phone book that are frequently called (up to 99 speed dial numbers can be saved).1. Select a speed dial number and press SET.2. Search for a phone number in the phone book.3. Select a phone number and press SELECT to complete the setting.View Speed Dial Number List: Displays a list of saved speed dial numbers.Clear All: Clears all saved speed dial numbers.※Select a speed dial number and press to make a call.Phone Book> Move : Moves a phone number to a different speed dial number. : Clears an assigned speed dial number.Phone Book
Group Settings ( Menu > Contacts > Group Settings )+ Edit a group to assign a phone number to or add a new group.Select a group to edit and change the group name and ring tone.Up to 30 groups can be set.Group name: Enter a group name (12 Korean characters, 24 alphabet characters)Group ring tone: Assign a ring tone to a group.※Incoming call from a phone number assigned to a group will sound the selected ring tone. However, the group ring tone will be ignored if another ring tone is assigned in the phone book.Phone Book
Left selection key ( Menu) > Settings > Information)You can see the setting information of WiFi phones.Basic Info.My phone number, Firmware version, MAC addressWifi Info.Displays the access point or wired/wireless router the WiFi phone is connected to.SSID, Signal Strength, BSSID, Security, Channel, Beacon IntervalNetwork info.Displays the IP address, netmask, gateway and DNS address.Wifi Info.Displays the access point or wired/wireless router the WiFi phone is connected to.SSID, Signal Strength, BSSID, Security, Channel, Beacon IntervalSettings
Left selection key ( Menu) > Settings > System > SIP )You can see the setting information of WiFi phones.SettingsSip Account.If you select SIP, the following options will appear:•Phone number –Enter your registered phone number from SIP server•User name –Enter your authorized user ID•Password –Enter your authorized password•Proxy –Enter the address of SIP server
Press the short key to set Wi-FiLeft selection key ( Menu) > Setting > Wi-Fi )Wi-Fi SettingsWi-Fi Settings.If you select Wi-Fi, the following display will appear:1. Display registered Wi-Fi profile (Top)•If there is no registered Wi-Fi, a default profile will appear- SayviewNet is a default profile.-SQ-3000 can registered Wi-Fi up to 4- Default Profile 1 + Registered from User 32. Display scanned AP list. (Bottom)•Display strength signal and SSID of scanned AP •Hidden AP will not display
Wi-Fi SettingsWi-Fi Settings.There are 3 ways to register AP1. Add profile from MenuSelect menu > Profile add SSID setting : Enter SSID nameSecurity setting : You can configure security to use.Networking setting : You can set Network DHCP or manually2. Add profile from AP list Select add SSID setting : SSID will set to automatically.Security setting : You can configure security to useNetworking setting : You can set Network DHCP or manually3. Add profile to TempSelect OK or TempSecurity setting : You can configure security to useNetworking setting : You can set Network DHCP or manuallyIf you add profile to temp, it does not mean to registered. You should connect to this AP manually every time when you connect to APWi-Fi Menu lists•Refresh : Refresh the scanned AP•Detail : Detail information of selected AP•Profile add : Add new profile. •Delete : Delete selected item ( It displays on the menu when you select registered AP list )•View registered : See registered Access Point ( It displays on the menu when you select registered AP list )•Change touch : It shows Access Point that you searched as icons. And you can drag the icon to connect access point.
SpecificationProduct SpecificationCertified Company UniDATACommunication Systems INCDevice Name Wireless Data Communication system wireless applianceModel SQ-3000Citification NumberManufacture UniDATA Communication Systems INCManufacture country Republic of KoreaFrequencyBand802.11b/g 2412MHz ~ 2462MHz802.11a 5745MHz ~ 5825MHz (11a)5180MHz ~ 5240MHz (11a -Non DFS)OperatingChannel 802.11b/g Ch 11802.11a 11a : Ch 511a-Non DFS : Ch 4Transmission Output(Peak Value)802.11b/g 2412MHz ~ 2462MHz (11b/g) 16.78 dBm802.11a 5745MHz ~ 5825MHz (11a): 13.14dBm5180MHz ~ 5240MHz (11a -Non DFS): 16.33 dBmDimensions 125(L) x 58(W) x 17(T)Weight 135gTemperature Range Operation: 32 to 122°F (0°C~50°C) Relative humidity 10%~80%Battery 3.7V/, 1450mAhThis equipment may occur crossed electronic wave and can not offer the service that regarding men’s safety
FCC ID: SQMSQ-3000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected ---Consult the dealer or an experienced radio/TV technician for help.

Navigation menu