UniData Communication Systems SQ-3500 VoIP Phone User Manual Microsoft PowerPoint SQ 3500 Manual G

UniData Communication Systems Inc. VoIP Phone Microsoft PowerPoint SQ 3500 Manual G

Contents

user manual

Download: UniData Communication Systems SQ-3500 VoIP Phone User Manual Microsoft PowerPoint   SQ 3500 Manual G
Mirror Download [FCC.gov]UniData Communication Systems SQ-3500 VoIP Phone User Manual Microsoft PowerPoint   SQ 3500 Manual G
Document ID1212670
Application IDp5AZO0gyNQ/pruBytoQWSw==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize149.45kB (1868184 bits)
Date Submitted2009-12-12 00:00:00
Date Available2009-12-12 00:00:00
Creation Date2009-10-27 13:14:18
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2009-11-24 17:37:37
Document TitleMicrosoft PowerPoint - SQ-3500 Manual_G.ppt
Document CreatorPScript5.dll Version 5.2.2
Document Author: jenny_jo

User Manual
This manual includes product specifications and instructions for SQ-3500 phone operation. This manual must be read before operating the product.
The SQ-3500 phone access point is required to use this product. Usage of the SQ-3500 access point provided in the full package is recommended.
Safety Precautions
Do not put the SQ-3500 in heating appliances such as heaters and microwave ovens to dry it if the device is wet.
This can cause explosions, deformation, or other problems. If this occurs, free services shall not be provided.
Do not use the SQ-3500 in places that are too hot or too wet (keep it indoors between 0 ℃ and + 50 ℃).
If the device gets wet with rain, or through spilled beverages, or is used in extremely hot/wet places such as public saunas, it can cause battery
explosions.
Be careful that conductors such as necklaces, keys, and coins not to contact battery terminals (the metal section).
Since short circuits can cause explosions, be careful to prevent this.
Keep the SQ-3500 and chargers out of the reach of children or pets.
Batteries in the mouth, or using broken batteries, can hurt or cause electric shocks.
Be sure to only use the designated batteries and accessories for the SQ-3500 provided by our company.
If you use unauthorized batteries or accessories, it can reduce the life of the SQ-3500, cause explosions, or damage. If this occurs free servicing is
avoid .
Correctly install the SQ-3500 in compliance with instructions.
Otherwise, abnormal operation of the SQ-3500, or a reduction in its life span may occur.
Record and keep the information contained in the SQ-3500 separately.
Since important information stored in the SQ-3500 can be removed due to unavoidable circumstances such as user carelessness, maintenance,
and product upgrades, please keep a record of important information. Take note that the manufacturer will not take responsibility for any damage
from the loss of information.
Never push the power button when the SQ-3500 is wet, and do not touch the SQ-3500, charger, or power cords with wet
hands. This can cause fires or electric shocks. The SQ-3500 is not water-resistant. Keep it dry
Do not use chemical detergents such as benzene, thinners, and alcohol to clean the SQ-3500.
This can cause fires.
Safety Precautions
Do not hold the SQ-3500 to your ears to turn on the power. This can cause hearing impairments or physical injuries.
Do not look at the infrared window in a direct way when using the remote control. this can cause visual impairment.
Refrain from the use of SQ-3500, and leave the power cord for the charger unplugged when it is thundering and flashed lightning.
Thunderbolts can cause severe physical injuries or fires.
Do not disassemble the SQ-3500 temporarily, or apply shocks to device.
If the device is damaged when you disassemble it, or inflict shocks on the device, it causes electric shocks, electric leakage or fires.
Index
Safety Precautions………………………………………………………………………………...............................................1
Basic Components...…………………………………………………………………………………………….….…...…………4
Battery Replacement….…………………………………………………………………………………….......….……………...5
Time Taking to Charge / Battery Life………………………………………………………………………….………………….6
Inserting / Removing a micro SD card…..…………………………………………………………………….…………………8
Power On/Off………………………………………………………………………………………..............................................10
Parts………………………………………………………………………………………………11
Display Indicators…………………………………………………………………………………………………………………..12
Calling Method………………………………………………………………………………………………………………………13
Phone Book………………………………………………………………………………………………………………………….20
Messaging……………………………………………………………………………………………………………………………27
Display………………………………………………………………………………………………………………………………..28
Sound…………………………………………………………………………………………………………………………………29
Tools…………………………………………………………………………………………………………………………………..3
Logs……………………………………………………….………………………………………………………..………………...31
System Settings…………………………….……………………………………………………………………..………………..32
Basic Components
The Basic Components as shown below may be different from the original.
For safety in use, please purchase authentic products. If you want to purchase additional batteries or chargers, contact your
dealer.
Phone
Cradle
Battery
Manual
Adapter
Battery Replacement
Battery Replacement
Use only batteries authorized by the company when you replace batteries, following the diagram below.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED WITH AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
Battery installation method
Battery removal
①
②
②
③
①
If the battery is inserted upside down, the SQ-3500 phone will not work.
Please turn off the power before removing the battery from the SQ-3500 phone.
(a sudden power off can cause problems)
Time Taking to Charge / Battery Life
Charge the battery
Charge the battery after purchasing the product as it is not fully charged.
Charging with the desktop charger
Features
Charging
Charging
Complete
Charging Lamp
RED
GREEN
※ Lamp on the charger flickers? Separate the battery from the charger,
and then re-fits into the charger. It is still flickering? Then, cleans the
charging terminal and charge the battery. (When the lamp doesn’t stop
flickering, apply to the dealer.)
Time Taking to Charge / Battery Life
Time Taking to Charge / Battery Life
※ Battery life varies with the environment temperature,
battery age and movement of the user.
Model
Standard Model
Charging time
3 hours 30 minutes
Battery life
(continuous
calling)
Voice
6 hours
Video
3 hours
-Battery life is not permanent
The successive use time and standby time of batteries are the
estimates of the company’s laboratory, which can vary from
the figures in the manual depending on the patterns used
Inserting / Removing the Micro SD card
Inserting the micro SD card
Use Only compatible micro SD cards approved by UniData for use with this device. UniData uses approved industry standards
for memory cards, but some brands may not be fully compatible with this device. Incompatible cards may damage the card, the
device and corrupt data stored on the card.
The phone supports micro SD cards up to 8GB.
1.Open the side cover of the micro SD slot.
2. Insert the card into the micro SD card slot with the contact surface facing down, and press it until it locks into place.
3. Close the side cover.
Remove the micro SD card
1.
2.
3.
Make sure that no application is currently accessing the micro SD memory card.
Open the side cover of the micro SD slot.
Press the micro SD card slightly in to release lock, and pull the card out.
Important: Do not remove the memory card in the middle of an operation when the card is being accessed.
Removing the card in the middle of an operation may damage the memory card as well as the device, and data stored on the
card may be corrupted.
You can remove or replace the micro SD card during phone operation without switching the device off.
Power On / Off
If you want to turn on the power,
keep pressing
for 3 seconds or more.
If you want to turn off the power, keep pressing
for 3 seconds or more.
If anything abnormal takes place, or if the power button does not work while using a Wi-Fi phone, start the phone after
removing and inserting the battery. Turn on the power after waiting for 5 seconds or more when you restart the phone
Names & Function of Device Parts
19
21
14
Send Key
Used for receiving and making
calls
Left Selection Key
Right Selection Key
End Key
Used to end a call and to
switch the power ON/OFF
Mute Shortcut
AP Search Key
10
Alarm Shortcut
11
Using Message function
12
Calendar
13
Using user-defined function
14
Volume Control
Vibration shortcut
Press and hold to vibrate
15
MIC
16
Micro SD Insert hole
Key Lock
Lock and unlock the keypad.
17
Earphone
18
Earpiece
19
Speaker
20
Front Camera
21
Back Camera
Clear Key
Removing characters or
moving to previous screen.
10
Display Indicators
Signal strength
Out of call coverage area
Call trial or connection
Call not available
You have selected the sound setting
Mute button, displayed when the volume is set to “0”
Vibration Mode
Silent Mode
An Alarm is set
You have one or more unread messages in the Inbox folder
Setting to call forwarding service
Remaining battery life
Full
Low
Empty
Connecting to network
Shows that the keys are locked. Key operation is disabled
Micro SD card is being accessed
11
Calling Method
Voice Calls
Call
Connect
In standby, enter the numeric keys and then press the
key
※ Call quality may be reduced at increased distance away from the access point.
12
Calling Method
Video Calls
Call
connect
In standby, enter the numeric keys and then press
※ Call quality may be reduced at increased distance away from the access point.
13
Calling Method
Call logs
Redialing recently used numbers
You can make voice or video calls by
dialing recently used numbers (incoming,
outgoing, missed, received/sent text
messages). During stand-by, press the
SEND key and then select the phone
number you want to call.
- Select VIDEO in the menu if you want to
make a video call.
Speed dialing
You can speed dial saved numbers to
make calls quickly and easily.
During stand-by, press the speed dial
number and then press the SEND key to
make a call.
- Press the VIDEO key to make a video
call.
14
Calling Method
Number
Key
Auto-search
Press a part of the number you want to call to autosearch the phonebook and display the results. Select a
phone number and press the OK key.
- Press the VIDEO key to make a video call.
15
Using the Menu During a Voice Call
Using the menu during a voice call
Making a voice call
•Refer to page 12.
Convert to video call: Convert the current voice call
to a video call without ending the call.
Contacts: Search the phone book.
Send message: Send a message during a call
without ending it.
Memo: Write and save a message during a call.
Taking a voice call
Press the SEND key to take an incoming call.
Press the END key to reject an incoming call.
16
Using the Menu During a Video Call
Making a video call
Using the menu during a video call
Change Camera: To converts the current video preview to back or
front camera sight.
Preview Off: Off the preview.
Mute: This function stops your caller from hearing your voice
temporarily. The caller's voice can still be heard.
View my picture: Turns off your picture and displays your caller's
picture only. (Changes to 'Hide my picture' when your picture is in
display.)
•Refer to page 13.
Taking a video call
Press the SEND key when the message “Incoming
video call” is displayed.
Press the END key to reject the incoming call.
17
Missed call
If you have a missed call, press
, and the last one of those calls will be answered.
To see calls that have arrived in your absence from the call list, press
or use the
Left selection key
Menu) > Logs > Call history
18
Call Transfer / Hold / Waiting
Transferring a call
When you are on a call, you can announce that you are transferring an
active call to another party, or you can directly transfer the call.
1. Press the
to put the call on HOLD.
2. Dial the 3rd party numbers and place a new call
3. Select the left selection key
(Menu > Transfer)
While 3rd party is connected to execute transfer function.
Call Waiting
When you are on a call, an alert message to indicate that you have
received a second call.
Press
to answer the incoming call. If you want to switch
between calls, press
19
Phone Book
Right select key
Left selection key
for shortcut
( Menu > Contacts > Search contacts )
Enter a part of a name, phone number or e-mail address to search for a phone number.
Search all: Search by a part (more than 1 character) of a name,
phone number or e-mail address.
Search by letter or digits: Enter letters or digits, then all names
starting with these letters/digits will be displayed..
Search by group: Select a group to search in (unspecified,
standard groups, custom groups).
Shortcut key search: Enter a set shortcut number to search for
a phone number.
Enter the name of the person you want to call and press the
View key to call a number saved in the phone book.
Press the (
) key to edit the saved details.
Press the ( Send ) key to call a found number.
You can search for phone numbers just by pressing ‘Search’
in stand-by mode. If you want to call the phone number
selected, press .
20
Phone Book
1. Phone Number Search - Menu (for a saved number)
2. Phone number search – video call
1. Press the
to make a video call from the phone book
you have selected.
- The phone number selected must be compatible with video
calling.
- A video call will be converted to a voice call if the dialed
number does not support video calling or if the video call
receiver is in an area where video calls cannot be made.
3. Add new contacts – from phonebook
1. Press
Menu.
21
and select > Add contacts on the Phone Book
Phone Book
1. Phone Number Search - Menu (for a saved phone number)
4. Phone Number Search - Delete
Press
and select > Delete from Phone Book menu.
Delete the selected number.
5. Phone Number Search – Delete All
Press
and select > Delete all from Phonebook menu.
Press ‘Yes’ after entering the password to delete all saved numbers.
- Take note that if you select Delete All, all stored phone numbers will be
deleted.
Check again before deleting as deleted phone numbers cannot be
recovered.
22
Phone Book
Image
Save a picture. (Press and select)
Name
Save a name. (Up to 16 alphabet characters)
Group
Assign a group.
Use direction key to assign the group.
Phone
Number
Save a phone number.
Select a main phone number and phone number type.
Press the shortcut key to assign a speed dial number.
Add number
Add a new number.
Up to 5 phone numbers can be saved.
(Select an icon and press OK to save)
E-Mail
Address
Save an e-mail address.
Up to 1,000 phone numbers can be saved.
Messenger
Save messenger details.
※ Each type of phone number can be selected. If more
than 2 phone numbers are to be saved, one phone
number must be selected as the main phone number.
Ringtone
Assign a ring tone.
Birthday
Save a birthday. (Can be saved on the scheduler)
Memo
Save a memo.
Up to 34 Korean characters and 65 alphabet
characters can be saved.
2. Add new contacts (
Menu >
Contacts > Add contacts )
Add a new phone number and other details.
23
Phone Book
You can add new number in standby mode.
Dial a phone number and press SAVE during stand-by to save phone numbers.
24
PhoneBook
Book
Phone
3. To set speed dial, select
( Menu > Contacts > Speed dial )
Set speed dial numbers for phone numbers saved in the phone book that are frequently called (up to 99 speed dial numbers can be saved).
1. Select a speed dial number and press SET.
View Speed Dial Number List: Displays a list of
saved speed dial numbers.
2. Search for a phone number in the phone book.
Clear All: Clears all saved speed dial numbers.
3. Select a phone number and press SELECT to
complete the setting.
> Move: Moves a phone number to a different speed dial number.
: Clears an assigned speed dial number.
25
※ Select a speed dial number and press
make a call.
to
Phone Book
Group Settings
( Menu > Contacts > Group Settings )+ Edit
a group to assign a phone number or add a new group.
Select a group to edit and change the group name
and ring tone.
Up to 30 groups can be set.
Group name: Enter a group name (12 Korean characters, 24 alphabet
characters)
Group ring tone: Assign a ring tone to a group.
※ Incoming call from a phone number assigned to a group will sound
the selected ring tone. However, the group ring tone will be ignored if
another ring tone is assigned in the phone book.
26
Messaging
In messaging, you can read, write and send messages. The messaging service can only be used if it is supported by
your network or service provider
Left selection key
( Menu > Messaging ) or press the shortcut key
Create a text message
Select Menu > Messaging > New message
1.Enter the message.
2.To add symbol and emoticon during writing a text, select menu
3.To add recipients, scroll to the To: field, and enter the recipient’s number
or select Search to add recipients from the available options.
You can add recipients up to 20 recipients.
Messaging folders
Inbox – All the incoming messages are stored in the  folder with detailed date, time and sender of each message shown.
You can use  to reply, forward, save number, save in saved box and delete the selected message or delete all messages
in the Inbox
Outbox – Outbox is the place where the messages sent out are saved. The time the message was sent out and the receiver information
is shown
Draft – Draft is the place where the messages in process are kept. A message is put in the  folder when you saved the text you just
keyed into the message and it is kept in the Draft folder until sent out.
27
Display
Display settings Select the left selection
Menu > Display
There are 4 options included in Display Settings
Wallpaper
Select Menu > Display > Wallpaper
This feature enables you to set a picture as a wallpaper image in your phone’s stand -by screen.
There are fifteen built-in pictures for you to change the background image
Screen
To define the clock type of the time format in stand-by screen, Select Menu > Display > Screen
Banner
To select the type of the banner as a phone number or greeting in your phone’s stand-by screen
Select Menu > Display > Banner > Set banner >
Greeting, Select Menu > Display > Banner > Set banner > Input text
This option enables you to set welcome as a greeting to be displayed in your phone’s stand-by screen.
To change the Greeting text, Select Menu > Display > Banner > Edit Input text
Brightness
To set time to dim the display Select Menu > Display > Brightness > LCD backlight
28
Sound Settings
Bell settings
Select left selection
Menu > Sound settings > Bell to change the type of the bell
Bell mode
Select menu > Sound settings > Bell mode to choose how the phone notifies you of an incoming voice call.
The alert type allows you to choose between Ringing(Ringtone), Vibrating and Silent.
Volumes
To adjust volumes of Ring, Speaker, Handset and Headset.
Select menu > Sound settings > Volumes
Manner Mode
Select menu > Sound settings > Manner mode to choose vibrating the phone notifies you of an incoming voice call and silent key tone and
alarm.
29
Tools
Alarm
To set an alarm, Select left selection
Menu > Tools > Alarm > Speed alarm.
When an alarm is activated, the alarm indicator will be displayed.
To dismiss the alarm and return to standby mode,
press  or  Tools > Unit converter
From this submenu you can use unit converter of Length, Weight, Width, Bulk and Temperature.
Calendar
To view the calendar, Select menu > Tools > Calendar
30
Logs
Select left selection
Menu > Logs > Call history
Log information about the communication history of the device. The device registers missed , received calls and SMS history up to 100.
To move to another tab press the  then use the 
Clogs info
To view the total number of calls, Select Menu > Logs > Clogs info
SMS info
To view the total number of messages, Select menu > logs > SMS info
Contacts info
To view the total number of contacts registered, speed dials and groups, Select Menu > logs > Contacts info
Call time hist.
To view the total time of outgoing and incoming calls, Select Menu > logs > Call time hist.
31
Settings
Press the shortcut key
Left selection key (
to set to Wi-Fi
Menu) > Setting > Wi-Fi )
Wi-Fi Settings.
If you select Wi-Fi, the following display will appear:
1. Display registered Wi-Fi profile (Top)
•
If there is no registered Wi-Fi, a default profile will appear
SayviewNet is a default profile.
SQ-3500 can be registered Wi-Fi up to 4
Default Profile 1 + Registered from User 3
2. Display scanned AP list. (Bottom)
•
Display strength signal and SSID of scanned AP
•
Hidden AP will not display
32
WLAN Settings
Wi-Fi Menu lists
•
•
•
•
•
•
Refresh: Refresh the scanned AP
Detail: Detail information of selected AP
Profile add: Add new profile.
Delete: Delete selected item ( It displays on the menu when you select the registered AP list )
View registered: See registered Access Point ( It displays on the menu when you select the registered AP list )
Change touch: It shows the Access Point that you searched as icons. And you can drag the icon to connect access point.
Wi-Fi Settings.
There are 3 ways to register an AP
1.Add profile from Menu
Select
menu > Profile add
SSID setting : Enter SSID name
Security setting : You can configure security to use.
Networking setting : You can set Network DHCP or manually
2.Add profile from AP list
Select
add
SSID setting : SSID will set automatically.
Security setting : You can configure the security to use
Networking setting : You can set Network DHCP or manually
3.Add profile as Temporary
Select OK or Temp
Security setting : You can configure the security to use
Networking setting: You can set the Network DHCP manually
33
If you add a profile as
, it means it is
connected as temporary so
you should connect to the AP
manually every time when you
connect to the AP if it is not
registered
User Settings
Reset to default Left selection key (
Menu) > Settings > User settings > Reset to default )
To reset all preference settings and delete all personal data, such as contacts, message, WLAN and SIP information
34
Picture Frame Settings
Digital Photo Frame
You can use the SQ-3500 as a Digital Photo Frame when it’s on the cradle.
To make a digital photo frame with the SQ-3500, copy images to the Micro SD card and insert Micro SD card into the SQ-3500.
Left selection key (
Menu) > Settings > Picture frame settings > Set picture frame > Enable )
To change the slide time of the digital photo frame, select Settings > Picture frame settings > Slide timeout
To change the start time of the digital photo frame after you put the phone on the cradle, select Settings > Picture frame settings > Start timeout
The function of the digital photo frame supports an image of up to 30pcs.
The function of the digital photo frame supports four different types of image – JPEG, GIF, BMP and PNG
The function of the digital photo frame supports images up to 1MB.
35
Time-zone
Time-zone
To define your time zone, select Left selection key (
You can select country and city of the country.
Menu) > Settings > Time-zone)
To update the time, date, and time zone information
with NTP server automatically, select
Left selection key (
Menu) > Settings > System > NTP
server)
36
Information
Left selection key (
Menu) > Settings > Information)
You can see the setting information of Wi-Fi phones.
Basic Info.
Network info.
My phone number, Firmware version, MAC
address
Displays the IP address, netmask, gateway and
DNS address.
Wi-Fi Info.
Displays the access point or wired/wireless router the Wi-Fi
phone is connected to.
SSID, Signal Strength, BSSID, Security, Channel, Beacon
Interval
37
System Settings
SIP Settings.
Left selection key (
Menu) > Settings > System > SIP )
You can set the information of the SIP server.
SIP Account.
If you select SIP, the following options will appear:
•
Phone number – Enter your registered phone number from SIP server
•
User name – Enter your authorized user ID
•
Password – Enter your authorized password
•
Proxy – Enter the address of SIP server
38
System Settings
Language Settings
To set the language used on the device display,
Select Left selection key (
Menu) > Settings > System > Language
Provision Settings
To download the new firmware via our Auto Provisioning Sever,
Select Left selection key (
Menu) > Settings > System > Provision > Enable
All the function of the phone as shown above on the manual may be different according to the phone version.
39
Specification
Product Specification
인증번호: UDC-SQ-3500-VA(B)
Certified
Company
UniData Communication Systems, INC.
Device Name
Wireless Data Communication system
wireless appliance
Model
SQ-3500
Certification
Number
Manufacture
UniData Communication Systems, INC.
Manufacture
Country
Republic of Korea
This equipment may occur crossed electronic
wave and can not offer the service that
regarding men’s safety
FCC ID: SQMSQ-3500
Frequency
Band
Operating
Channel
Transmission
Output
6303A-SQ-3500
802.11b/g
2400MHz ~ 2483.5MHz
802.11a
5150MHz ~ 5250MHz (A band)
5725MHz ~ 5850MHz (D band)
802.11b/g
Ch1 ~ Ch 13
802.11a
A Band : Ch36, Ch40, Ch44, Ch48
D Band : Ch149, Ch153, Ch157, Ch161, Ch165
802.11b/g
Under 10mW/MHz
802.11a
A Band : Under 2.5mW/MHz
D Band : Under 10m/WMHz
Dimensions
125(L) x 58(W) x 17(T)
Weight
135g
Temperature
Range
Operation: 32 to 122°F (0°C~50°C)
Relative
humidity
10%~90%
Battery
3.7V/, 1450mAh
40
Specification
FCC ID: SQMSQ-3500
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that may cause undesired operation. Any changes or modifications (including the antennas) made to this device
that are not expressly approved by the manufacturer may void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This device and its antenna must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
---Consult the dealer or an experienced radio/TV technician for help.
Frequency band of 5.15GHz to 5.25GHz is restricted to indoor used only to reduce any potential for harmful interference.
41


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:11:24 17:37:37+09:00
Create Date                     : 2009:10:27 13:14:18+09:00
Metadata Date                   : 2009:11:24 17:37:37+09:00
Format                          : application/pdf
Title                           : Microsoft PowerPoint - SQ-3500 Manual_G.ppt
Creator                         : jenny_jo
Document ID                     : uuid:8d66e9c9-0479-409a-828b-7e2d5ad04362
Instance ID                     : uuid:5e017663-7494-4e6e-8be9-19222ae261a4
Has XFA                         : No
Page Count                      : 44
Author                          : jenny_jo
EXIF Metadata provided by EXIF.tools
FCC ID Filing: SQMSQ-3500

Navigation menu