Uniden America UA1602 RADAR DETECTOR User Manual
Uniden America Corporation RADAR DETECTOR
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2926952 |
| Application ID | WddSWzqv6+Uz53qcL6JaJw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 28.73kB (359089 bits) |
| Date Submitted | 2016-03-11 00:00:00 |
| Date Available | 2016-03-11 00:00:00 |
| Creation Date | 2017-11-20 09:42:08 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-20 09:42:08 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS6 (Macintosh) |
VOL + : Go to the nextMenu item. VOL – : Go to the previousMenu item. Menu items commonly used for initial setup are: UNIDEN LONG RANGE RADAR/LASER DETECTOR BASIC USER’S MANUAL Voice (ON/OFF) X Band (ON/OFF) K Band (ON/OFF) Ka Band (ON/OFF) POP Filter (ON/OFF) Scan Display (ON/OFF). Display (TapMENU to cycle through Speed/Compass/Voltage/Altitude) Speed Unit (mph or KM/h) Auto Mute (ON/OFF) Backlight (ON/OFF) Refer to the online Detailed User’s Manual at www.uniden.com for specifics on all Menu options. NON-KEY ELEMENTS MUTE on • MUTE off MUTE MEMORY • Add • Delete MARK POWER VOL + VOL – MENU User Point * • Add • Delete Error message displays/ sounds if memory full or GPS error. Turn DFR7 on and off. • Turn volume up (6 levels). • In Menus, go to next item. DIM • Bright • Dim • Dark Provides a 360° monitoring radius. USB Provides PC connection for data updates. Audio Jack Plug in headset. Eject Press to release the bracket latch. Power Jack Plug the 12V Power Cord here. This section details DFR7 basic operations. Refer to the online Detailed User’s Manual at www.uniden.com for more complete details on all operations and Menu options. TURN ON NA Press and hold bothVOL + and VOL – to change modes between HIGHWAY and CITY. Press POWER. The unit turns on and runs through an initial self-check. It displays the different bands and their settings and indicates whether or not GPS is turned on. The DFR7 turns on automatically when you start the car. ADJUST VOLUME Press VOL + to increase volume. The unit beeps, announces “Volume (0 - 6),” and displays a number increase. Exit the Menu system. * User Points are manually tagged GPS locations where radar detection is normally located. For more information, refer to the online Detailed User Manual at www.uniden.com. MENU SYSTEM Press MENU to access theMenu system. The screen displays the selection’s current status. Use the following keys to navigate the menus: WHAT IT DOES Eagle Eye BASIC OPERATIONS Delete all User Points. • Turn volume down (6 levels). • In Menus, go to previous item. Access the Menu system. ELEMENT MENU: Change a setting (press and hold to exit the Menu system). Press VOL – to decrease volume. The unit beeps, announces “Volume (0 - 6),” and displays a number decrease. MUTE VOLUME DURING ALERT You can mute the alert volume during an alert. This is especially useful in situations where the alert may be prolonged, such as at red lights. Press MUTE/DIM during an audio alarm to mute it. CHANGE THE LCD’S BRIGHTNESS The backlight has three settings: BRIGHT, DIM, and DARK. Press and hold MUTE/DIM. The detector announces the brightnes level as it changes to that level. Press and hold the keys again to move to the next level. TURN BANDS ON/OFF Laser Pulsed Laser Signal Receiver Frequency: The DFR7 monitors X (HIGHWAY only), K, and Ka bands as well as Laser transmissions. Laser Front Convex Condenser Lens Laser Back Concave Condenser Lens 10.525 GHz Dimensions 24.150 GHz Weight 4.1 oz (115g) Ka 33.400 - 36.000 GHz Operating Temp. -4° to +185° F (Radar/Laser) -20° to +85° C (Radar/Laser) 800 nm - 1100 nm Storage Temp. -22° to +203° F (Radar/Laser) -30° to +95° C (Radar/Laser) Operating Power Soure DC 11.0 to 16.0 V CHANGE HIGHWAY TO CITY AND BACK Press and hold both VOL + and VOL – for at least 2 seconds to alternate between HIGHWAY and CITY setting. MARK USER POINTS (RADAR/LASER SITE) With the DFR7, you can mark geographical points where you commonly encounter radar transmissions, These can be school zones, red-light cameras, and places where police frequently monitor traffic. You can mark these points so the detector will announce and sound an alert when you approach them. When you are at the location, press MARK. The detector announces “User mark logged” and sounds an alert tone. Now, when you approach these points, the detector announces “Attention” and begins a distance countdown to the point of marking. Press and hold MARK at that location to delete that user point. TROUBLESHOOTING Laser Detector Type: Radar Scanning Frequency Discriminator Laser Pulse Width Discriminator IF... TRY THIS... No display or audio. Check the fuse in the plug. Replace if necessary. Alarm Type Beep (Detected Band and Signal strength) The unit alarms when the vehicle hits bumps. Check the connections. Be sure they are all secure. Storage Temp (Radar/Laser). -22° to +203° F -30° to +95° C The unit alarms briefly in the same location but no radar source was in view. There may be a motion sensor or house alarm in use within range. Operating Power Soure DC 11.0 to 16.0 V The detector did not alert when a police car was in view. • The officer may not have radar/ laser units turned on. • Check that the band are turned on. Press MENU. If the band is turned on, the LCD will show ON. The car starts but the detector does not turn on. • Verify that the power cord is securely connected to the unit and inserted into the cigarette lighter jack. • Change the fuse in the power cord. Unscrew the cigarette lighter jack to access the fuse. SPECIFICATIONS Receiver Type: Radar Antenna Type: Double Conversion Superheterodyne Self-Contained Antenna Radar Linear Polarized E-vector Vertical 110.00 mm (D) x 69.00 mm (W) x 29.50 mm (H) FCC/Industry Canada Information FCC: AMWUA1602 ICC: 513C-UA1602 This device complies with part 15 of the FCC Rules. Operaion is subject to the following two condiions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaion. Unauthorized changes or modiicaions to this equipment may void compliance with the FCC Rules. Any change or modiicaion must be approved in wriing by Uniden. Changes or modiicaions not approved by Uniden could void the user’s authority to operate the equipment. L’appareil est conforme aux normes d’Industrie Canada. Son foncionnement est soumis aux deux condiions suivantes : (1) Ce disposiif ne doit pas causer d’interférences et (2), il doit pouvoir accepter les interférences, incluant celles pouvant nuire à son foncionnement normal. Tous les changements apportés à cet appareil, s’ils ne sont pas expressément approuvés par Uniden ou toute uilisaion de celui-ci d’une autre manière que celle décrite dans ce guide peut annuler votre autorisaion de le faire foncionner. Limited Warranty Keep your receipt! Proof of purchase is required for warranty service. WARRANTOR: UNIDEN AMERICA CORP. (“Uniden”) ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and cratsmanship with only the limitaions or exclusions set out below. WARRANTY DURATION: This warranty to the original user shall terminate and be of no further efect 12 months ater the date of original retail sale. The warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modiied, altered, or used as part of any conversion kits, subassemblies, or any coniguraions not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfuncion covered by this warranty, (E) used in any conjuncion with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operaing Guide for this product. STATEMENT OF REMEDY: In the event that the product does not conform to this warranty at any ime while this war-ranty is in efect, warrantor will repair the defect and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representaives in connecion with the performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow this exclusion or limitaion of incidental or consequenial damages so the above limitaion or exclusion may not apply to you. LEGAL REMEDIES: This warranty gives you speciic legal rights, and you may also have other rights which vary from state to state. This warranty is void outside the United States of America. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, ater following the instrucions in this Operaing Guide, you are certain that the Product is defecive, pack the Product carefully (preferably in its original packaging). Include evidence of original purchase and a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, or delivered, to warrantor at: Uniden America Corporaion C/O Saddle Creek 743 Henrieta Creek Rd., Suite 100 Roanoke, TX 76262 (800) 297-1023, 8 a.m. to 4:30 p.m., Central, Monday through Friday POP Mode is a trademark of MPH Industries, Inc. Issue 1, November 2014
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Create Date : 2014:11:18 15:00:36-05:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2016:03:04 15:24:14+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2016:03:04 15:24:14+09:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Instance ID : uuid:0c8313d4-035f-4822-99d3-a0ea58e9e992 Original Document ID : xmp.did:A9BEFA00966DE411A793B49CEB63EC5C Document ID : xmp.id:71528B0027206811822AD6018614BAA0 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:97CF8044436FE4118D32C853D3C09638 Derived From Document ID : xmp.did:97CF8044436FE4118D32C853D3C09638 Derived From Original Document ID: xmp.did:A9BEFA00966DE411A793B49CEB63EC5C Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Macintosh) History Changed : / History When : 2014:11:18 15:00:36-05:00 Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Count : 2EXIF Metadata provided by EXIF.tools