Uniden America UB360 DIGITAL MOBILE TRUNKING SCANNER User Manual

Uniden America Corporation DIGITAL MOBILE TRUNKING SCANNER Users Manual

Users Manual

Download: Uniden America UB360 DIGITAL MOBILE TRUNKING SCANNER User Manual
Mirror Download [FCC.gov]Uniden America UB360 DIGITAL MOBILE TRUNKING SCANNER User Manual
Document ID1109911
Application IDUnprbTCfrvDPlaBHbq4MxA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize348.22kB (4352754 bits)
Date Submitted2009-05-13 00:00:00
Date Available2009-05-13 00:00:00
Creation Date2009-04-07 10:08:10
Producing SoftwareAcrobat Web Capture 7.0
Document Lastmod2009-04-08 23:18:52
Document TitleUsers Manual

file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html
BCD996XT
●
●
●
●
●
Important information
❍ General Precautions
❍ Specifications
❍ FCC Information
❍ Warranty and Support Information
❍ User Guide Information
Operation overview
Setting up the hardware
Programming your scanner
Operating your scanner
Important information
For general information about using a scanner, including how to program the various types of radio systems into your scanner, we suggest you start with the
General Users Guide page.
General Precautions
Specifications
●
●
Hardware specifications
Software reference 
FCC Information
Warranty and Support Information
User Guide Information
Operation overview
●
●
●
●
Available operation modes
Menu reference
Keys and their functions
Reading the display
Setting up the hardware
●
●
●
Included with the scanner
Installing the batteries
Connecting the antenna
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html (1 of 2)4/7/2009 10:08:22 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html
●
Connecting a GPS receiver
Programming your scanner
●
●
●
●
●
●
Setting up systems
Programming Number Tags
Programming Quick Keys
Programming Search Keys
Programming locations
Setting alerts
Operating your scanner
●
●
●
●
●
●
Using Number Tags
Using Quick Keys, Startup Keys, and Search Keys
Using Tone Out mode
Using Close Call mode
Using Band Scope mode
Using GPS mode
This page applies to the following scanner(s): BCD996XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XT.html (2 of 2)4/7/2009 10:08:22 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Conventional Systems
Please note that these pages are meant as general instructions. While most of the information here applies to all
scanners, some options may not be available on certain scanner models. Model-specific options are indicated in the
text.
Since a conventional system is really a collection of frequencies, the first thing you need to know is the frequency for each
channel you want to program. Here is an example of a conventional system frequency list from RadioReference:
Conventional System
●
●
●
Here is a conceptual layout diagram of a basic conventional system. (Click here for a legend of the diagram.)
You can download a planning worksheet for conventional systems as a pdf file or an Excel spreadsheet file.
Programming a Conventional System
❍ Create a system
■ System properties
❍ Create at least 1 channel group
■ Channel group properties
❍ Create at least 1 channel in each group
■ Channel properties
Programming a Conventional System
To program a conventional system, you'll need to program the required elements in following order (click here for information
on using the menu):
Create a system
1.
2.
3.
4.
5.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select Conventional .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want to change it.
If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate
the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on
each scanner are listed beside the property.
Property
Option name
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (1 of 4)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Required
None
Recommended
Name
Edit Name
Number tag
Set Number Tag
Quick key
Set Quick Key
Optional
Automatic Gain Control
(AGC)
BCD396XT and BCD996XT: Set Audio AGC
BC346XT and BCT15X: Not available
Delay time
Set Delay Time
Hold time
Set Hold Time
Lockout
Set Lockout
P25 wait time
BCD396XT and BCD996XT: P25 Waiting Time
BC346XT and BCT15X: Not available
Startup key
Set Startup Key
Available operations
Copy a system
Copy System
Delete a system
Delete System
Create at least 1 channel group
Each conventional system can contain up to 20 channel groups, and all systems must contain at least 1 channel group.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that now. Unless a property is Required , you can
operate the system without changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's Edit Group menu. If necessary, the sub-menu
and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (2 of 4)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Name
Edit Name
Quick key
Set Quick Key
Optional
Location
information
Set Location
Info
Lockout
Set Lockout
Available operations
Delete Group
Delete a group
Create at least 1 channel in each group
Each conventional system can contain up to 1000 channels in each group, and all groups must contain at least 1 channel.
1.
2.
3.
4.
On the Edit Group menu, select the channel group you just created.
Go to the Edit Channel menu and select New Channel .
Input the frequency for this channel in MHz.
If you need to change any of the channel properties, you can do that now. Unless a property is Required , you can operate
the system without changing the default settings.
Channel properties
(All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If necessary, the sub-menu
and the exact option name are listed beside each property.)
Property
Option name
Required
Frequency
Edit Frequency
Recommended
BCD396XT and BCD996XT: Set Audio Type
Analog/digital
●
●
CTCSS/DCS
P25 Network Address (NAC)
BC346XT and BCT15X: Not available
Set CTCSS/DCS (BCD396XT: analog channels only)
BCD396XT and BCD996XT: P25 NAC Option (digital channels
only)
BC346XT and BCT15X: Not available
Modulation
Set Modulation
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (3 of 4)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html
Name
Edit Name
Number tag
Set Number Tag
Optional
Alert
Set Alert
Attenuator
Set Attenuator
Lockout
Set Lockout
Priority
Set Priority
Volume Offset
Volume Offset
Available operations
Copy a channel
Copy Channel
Delete a channel
Delete Channel
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT
UsersGuide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ConventionalSystems.html (4 of 4)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html
EDACS SCAT Systems
Please note that these pages are meant as general instructions. While most of the information here applies to all scanners, some options may not be available on
certain scanner models. Model-specific options are indicated in the text.
This section deals with EDACS SCAT systems. Click here for information on EDACS Wide and Narrow systems. Below is an example of an EDACS SCAT system from
RadioReference:
150 px
And here is a conceptual layout diagram of a basic EDACS SCAT system. (Click here for a legend of the diagram.)
●
Programming an EDACS SCAT System
❍ Create a system
■ System properties
❍ Create a site
■ Site properties
❍ Create at least 1 frequency
■ Frequency properties
Programming an EDACS SCAT System
To program an EDACS SCAT system, you'll need to program the required elements in following order (click here for information on using the menu):
Create a system
1.
2.
3.
4.
5.
6.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select EDCS .
The scanner will prompt you for the sub-type. Select SCAT .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want to change it.
If you need to change any of the system properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (1 of 3)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html
Name
Edit Name
Number tag
Set Number Tag
Optional
Automatic Gain Control
(AGC)
BCD396XT or BCD996XT: Set Audio AGC
BC346XT or BCT15: Not available
Delay time
Set Delay Time
Available operations
Copy a system
Copy System
Delete a system
Delete System
Create a site
Each EDACS SCAT system must contain exactly 1 site.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Site menu.
3. If you need to change any of the site properties, you can do that now. Unless a property is Required , you can operate the system without changing the default settings.
Site properties
All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Set Quick Key
Quick key
Optional
Attenuator
Set Attenuator
Hold time
Set Hold Time
Location
information
Set Location
Info
Lockout
Set Lockout
Modulation
Set Modulation
Startup key
Set Startup Key
Available operations
None
Create at least 1 frequency
Each EDACS SCAT system must contain at least 1 frequency in its site.
1.
2.
3.
4.
Open the Edit Site menu.
Go to the Set Frequencies sub-menu and select New Frequency .
Enter at least 1 frequency for this site.
If you need to change any of the frequency properties, you can do that now. Unless a property is Required , you can operate the system without changing the default
settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If necessary, the sub-menu and option name on each scanner are listed beside
the property.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (2 of 3)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html
Property
Option name
Required
None
Recommended
Number tag
Set Number Tag
Optional
Set Lockout
Lockout
Available operations
Delete a
frequency
Delete
Frequency
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSSCATSystems.html (3 of 3)4/7/2009 10:08:25 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
EDACS Trunked Systems
Please note that these pages are meant as general instructions. While most of the
information here applies to all scanners, some options may not be available on certain
scanner models. Model-specific options are indicated in the text.
This section deals with EDACS Wide or standard systems. Click here for information on EDACS
SCAT systems. This includes EDACS systems that use ESK. No special setting is needed to enable
ESK tracking on an EDACS system. Note that the scanner cannot decode EDACS ProVoice. Below is
an example of an EDACS trunked system from RadioReference:
EDACS Wide System
●
●
●
●
Here is a conceptual layout diagram of a basic EDACS Wide system. (Click here for a legend
of the diagram.)
You can download a planning worksheet for EDACS systems as a pdf file or an Excel
spreadsheet file.
Programming an EDACS System
❍ Create a system
■ System properties
❍ Create at least 1 site
■ Site properties
❍ Create at least 1 frequency in each site
■ Frequency properties
Programming a system for Scanning
❍ Create at least 1 channel group
■ Channel group properties
❍ Create at least 1 channel in each group
■ Channel properties
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (1 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
Programming an EDACS System
To program an EDACS system, you'll need to program the required elements in following order (click
here for information on using the menu):
Create a system
1.
2.
3.
4.
5.
6.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select EDCS .
The scanner will prompt you for the sub-type. Select Wide/Narrow .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want to change it.
If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the submenu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Automatic Gain Control
(AGC)
BCD396XT and BCD996XT: Set Audio AGC
BC346XT and BCT15X: Not available
Delay time
Set Delay Time
Emergency alert
Emergency Alert
ID format
Set ID Format (AFS) or (DEC)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (2 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
ID scan/search
ID Scan/Search
Priority ID scan
Priority ID scan
Available operations
Copy a system
Copy System
Delete a system
Delete System
Review locked-out IDs
Rvw ID:Srch L/O
Clear all locked-out IDs
Clr All L/O IDs
Create at least 1 site
Each EDACS system can contain up to 256 sites, and all systems must contain at least 1 site.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Site menu and select New Site .
3. If you need to change any of the site properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Site properties
All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and
option name on each scanner are listed beside the property.
Property
Option name
Required
Site type
Set Site Type
Recommended
Name
Edit Name
Quick key
Set Quick Key
Optional
Attenuator
Set Attenuator
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (3 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
Hold time
Set Hold Time
Location
information
Set Location
Info
Lockout
Set Lockout
Modulation
Set Modulation
Startup key
Set Startup Key
Available operations
Delete Site
Delete a site
Create at least 1 frequency in each site
Each trunked system can contain up to 23 frequencies in each site, and all sites must contain at least 1
frequency.
1.
2.
3.
4.
On the Edit Site menu, select the site you just created.
Go to the Set Frequencies sub-menu and select New Frequency .
Enter at least 1 frequency for this site.
When you enter a new frequency, the scanner will prompt you for the logical channel number
or LCN for that frequency. Enter a number from 1 through 30.
5. If you need to change any of the frequency properties, you can do that now. Unless a property
is Required , you can operate the system without changing the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
Logical channel
number
Input LCN
Recommended
None
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (4 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
Optional
Set Lockout
Lockout
Available operations
Delete
Frequency
Delete a frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can Search the system with no problems. However,
if you want to Scan the system, you'll need to program the required elements in following order (click
here for information on using the menu):
Create at least 1 channel group
Each EDACS system can contain up to 20 channel groups, and any system you want to scan must
contain at least 1 channel group.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's Edit Group menu.
If necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Quick key
Set Quick Key
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (5 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
Optional
Location
information
Set Location
Info
Lockout
Set Lockout
Available operations
Delete Group
Delete a group
Create at least 1 channel in each group
Each trunked system can contain up to 500 channels in each group, and all groups must contain at
least 1 channel.
1.
2.
3.
4.
On the Edit Group menu, select the channel group you just created.
Go to the Edit Channel menu and select New Channel .
Input the Talk Group ID (TGID) for this channel.
If you need to change any of the channel properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Channel properties
All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
Edit Talk Group
ID
TGID
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Alert
Set Alert
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (6 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html
Lockout
Set Lockout
Priority
Set Priority
Volume Offset
Volume Offset
Available operations
Copy a channel
Copy Channel
Delete a
channel
Delete Channel
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT
UsersGuide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/EDACSTrunkedSystems.html (7 of 7)4/7/2009 10:08:26 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
LTR Trunked Systems
Please note that these pages are meant as general instructions. While most of the
information here applies to all scanners, some options may not be available on certain
scanner models. Model-specific options are indicated in the text.
Below is an example of an Logic Trunked Radio or LTR system from RadioReference:
LTR System
●
●
●
●
●
Here is a conceptual layout diagram of a basic LTR system. (Click here for a legend of the
diagram.)
You can download a planning worksheet for LTR systems as a pdf file or an Excel spreadsheet
file.
For more information on the different types of LTR systems and how they work, see the Logic
Trunked Radio page at Radio Reference's Wiki.
Programming an LTR System
❍ Create a system
■ System properties
❍ Create at least 1 site
■ Site properties
❍ Create at least 1 frequency in each site
■ Frequency properties
Programming a system for Scanning
❍ Create at least 1 channel group
■ Channel group properties
❍ Create at least 1 channel in each group
■ Channel properties
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (1 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
Programming an LTR System
To program an LTR system, you'll need to program the required elements in following order (click
here for information on using the menu):
Create a system
1.
2.
3.
4.
5.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select LT .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want to change it.
If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the submenu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Automatic Gain Control
(AGC)
BCD396XT and BCD996XT: Set Audio
AGC
BC346XT and BCT15X: Not available
Delay time
Set Delay Time
ID scan/search
ID Scan/Search
Priority ID scan
Priority ID scan
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (2 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
Available operations
Copy a system
Copy System
Delete a system
Delete System
Review locked-out IDs
Rvw ID:Srch L/O
Clear all locked-out IDs
Clr All L/O IDs
Create at least 1 site
Each LTR system can contain up to 256 sites, and all systems must contain at least 1 site.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Site menu and select New Site .
3. If you need to change any of the site properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Site properties
All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and
option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Quick key
Set Quick Key
Optional
Attenuator
Set Attenuator
Hold time
Set Hold Time
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (3 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
Location
information
Set Location
Info
Lockout
Set Lockout
Modulation
Set Modulation
Startup key
Set Startup Key
Available operations
Delete Site
Delete a site
Create at least 1 frequency in each site
Each LTR system can contain up to 20 frequencies in each site, and all sites must contain at least 1
frequency.
1.
2.
3.
4.
On the Edit Site menu, select the site you just created.
Go to the Set Frequencies sub-menu and select New Frequency .
Enter at least 1 frequency for this site.
When you enter a new frequency, the scanner will prompt you for the logical channel number
or LCN for that frequency. Enter a number from 1 through 20.
5. If you need to change any of the frequency properties, you can do that now. Unless a property
is Required , you can operate the system without changing the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
Logical channel
number
Input LCN
Recommended
None
Optional
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (4 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
Set Lockout
Lockout
Available operations
Delete
Frequency
Delete a frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can Search the system with no problems. However,
if you want to Scan the system, you'll need to program the required elements in following order (click
here for information on using the menu):
Create at least 1 channel group
Each LTR system can contain up to 20 channel groups, and any system you want to scan must contain
at least 1 channel group.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's Edit Group menu.
If necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Quick key
Set Quick Key
Optional
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (5 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
Location
information
Set Location
Info
Lockout
Set Lockout
Available operations
Delete Group
Delete a group
Create at least 1 channel in each group
Each trunked system can contain up to 500 channels in each group, and all groups must contain at
least 1 channel.
1.
2.
3.
4.
On the Edit Group menu, select the channel group you just created.
Go to the Edit Channel menu and select New Channel .
Input the Talk Group ID (TGID) for this channel.
If you need to change any of the channel properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Channel properties
All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
Edit Talk Group
ID
TGID
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Alert
Set Alert
Lockout
Set Lockout
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (6 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html
Priority
Set Priority
Volume Offset
Volume Offset
Available operations
Copy a channel
Copy Channel
Delete a
channel
Delete Channel
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LTRTrunkedSystems.html (7 of 7)4/7/2009 10:08:27 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
Motorola Trunked Systems
Please note that these pages are meant as general instructions. While most of the
information here applies to all scanners, some options may not be available on certain
scanner models. Model-specific options are indicated in the text.
A Motorola system can be an 800 MHz, 400 MHz (UHF), or 100-200 MHz (VHF) system. Below are
some examples of these Motorola systems from RadioReference:
Motorola 800 MHz System
Another Motorola 800 MHz System
●
Even though some (or all) of the System Voice channels are APCO 25, this system, and others
like it, is correctly programmed as a Motorola 800 MHz system, per the information given for
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (1 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
the System Type.
Motorola UHF System (400 MHz band)
Motorola VHF System (100-200 MHz band)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (2 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
●
●
●
●
●
Here is a conceptual layout diagram of a basic Motorola system. (Click here for a legend of the
diagram.)
You can download a planning worksheet for Motorola systems as a pdf file or an Excel
spreadsheet file.
For more information on the different types of Motorola systems and how they work, see the
Motorola page at Radio Reference's Wiki.
Programming a Motorola System
❍ Create a system
■ System properties
❍ Create at least 1 site
■ Site properties
❍ Create at least 1 frequency in each site
■ Frequency properties
Programming a system for Scanning
❍ Create at least 1 channel group
■ Channel group properties
❍ Create at least 1 channel in each group
■ Channel properties
Programming a Motorola System
To program a Motorola system, you'll need to program the required elements in following order:
Create a system
1.
2.
3.
4.
5.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select MOT .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want to change it.
If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the submenu and option name on each scanner are listed beside the property.
Property
Option name
Required
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (3 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
Name
Edit Fleet Map (Required for Motorola Type I or Type I/II Hybrid
systems only)
Recommended
Edit Name
Number tag
Set Number Tag
Fleet map
Automatic Gain Control
(AGC)
Optional
BCD396XT and BCD996XT: Set Audio AGC
BC346XT and BCT15X: Not available
Delay time
Set Delay Time
Emergency alert
Emergency Alert
ID format
Set ID Format (DEC/HEX) or (AFS/DEC)
ID scan/search
ID Scan/Search
Priority ID scan
Priority ID scan
Status bit
Set Status bit
Copy a system
Available operations
Copy System
Delete a system
Delete System
Review locked-out IDs
Rvw ID:Srch L/O
Clear all locked-out IDs
Clr All L/O IDs
Create at least 1 site
Each Motorola system can contain up to 256 sites, and all systems must contain at least 1 site.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Site menu and select New Site .
3. If you need to change any of the site properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Site properties
All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and
option name on each scanner are listed beside the property.
Property
Band plan
Option name
Required
Edit Band Plan
Recommended
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (4 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
Edit Name
Name
Quick key
Set Quick Key
Optional
Set Attenuator
Attenuator
Control channel only Set C-Ch Only
Set Hold Time
Hold time
Location
information
Lockout
Set LocationInfo
Set Lockout
Set Modulation
Modulation
P25 wait time
BCD396XT and BCD996XT: P25 Waiting Time
BC346XT and BCT15X: Not available
Startup key
Set Startup Key
Delete a site
Available operations
Delete Site
Create at least 1 frequency in each site
Each trunked system can contain up to 30 frequencies in each site, and all sites must contain at least 1
frequency.
1.
2.
3.
4.
On the Edit Site menu, select the site you just created.
Go to the Set Frequencies sub-menu and select New Frequency .
Enter at least 1 frequency for this site.
If you need to change any of the frequency properties, you can do that now. Unless a property
is Required , you can operate the system without changing the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (5 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
None
Optional
Set Lockout
Lockout
Available operations
Delete a
frequency
Delete
Frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can Search the system with no problems. However,
if you want to Scan the system, you'll need to program the required elements in following order:
Create at least 1 channel group
Each Motorola system can contain up to 20 channel groups, and any system you want to scan must
contain at least 1 channel group.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default settings.
Channel group properties
(All of these options can be found by selecting the group name under the Edit Group menu. If
necessary, the sub-menu and the exact option name are listed beside each property.)
Required
None
Name (Edit Name)
Recommended
Quick key (Set Quick Key)
Location information (Set LocationInfo)
Optional
Lockout (Set Lockout)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (6 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html
Available
operations
Delete Group
Create at least 1 channel in each group
Each trunked system can contain up to 500 channels in each group, and all groups must contain at
least 1 channel.
1.
2.
3.
4.
On the Edit Group menu, select the channel group you just created.
Go to the Edit Channel menu and select New Channel .
Input the Talk Group ID (TGID) for this channel.
If you need to change any of the channel properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Channel properties
(All of these options can be found by selecting the channel name under the Edit Channel menu. If
necessary, the sub-menu and the exact option name are listed beside each property.)
Required
TGID (Edit Talk Group ID)
Audio type (Analog or digital) (BCD396XT and BCD996XT only) (Set
Audio Type)
Recommended
Name (Edit Name)
Number tag (Set Number Tag)
Alert (Set Alert)
Lockout (Set Lockout)
Optional
Priority (Set Priority)
Volume Offset
Copy Channel
Available operations
Delete Channel
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MotorolaTrunkedSystems.html (7 of 7)4/7/2009 10:08:28 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Standard P25 Trunked Systems
To determine whether the information on this page applies to your scanner, see the tags
at the bottom of the page.
This section deals with standard Project 25 or P25 systems. Click here for information on P25 onefrequency systems. Below is an example of a standard P25 system from RadioReference:
Standard P25 System
●
●
●
●
Here is a conceptual layout diagram of a basic P25 system. (Click here for a legend of the
diagram.)
For more information on P25 systems and how they work, see the Project 25 page at Radio
Reference's Wiki.
Programming a P25 System
❍ Create a system
■ System properties
❍ Create at least 1 site
■ Site properties
❍ Create at least 1 frequency in each site
■ Frequency properties
Programming a system for Scanning
❍ Create at least 1 channel group
■ Channel group properties
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (1 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Create at least 1 channel in each group
■ Channel properties
❍
Programming a P25 System
To program a P25 system, you'll need to program the required elements in following order:
Create a system
1.
2.
3.
4.
5.
6.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select P25 .
The scanner will prompt you for the sub-type. Select Standard trunk .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want to change it.
If you need to change any of the system properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
System properties
All of these options can be found under your scanner's Program System menu. If necessary, the submenu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Number tag
Edit Sys Option#Set Number Tag
Optional
Automatic Gain Control (AGC)
BCD396XT: Edit Sys Option#Set Audio AGC
BC346XT: Not available
Delay time
Edit Sys Option#Set Delay Time
ID format
Edit Sys Option# Set ID Format (DEC/HEX) or (AFS/DEC)
ID scan/search
Edit Sys Option#ID Scan/Search
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (2 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Edit Sys Option#Priority ID scan
Priority ID scan
Available operations
Copy a system
Copy System
Delete a system
Delete System
Review locked-out IDs
Edit Sys Option#Rvw ID:Srch L/O
Clear all locked-out IDs
Edit Sys Option#Clr All L/O IDs
Create at least 1 site
Each P25 system can contain up to 256 sites, and all systems must contain at least 1 site.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Site menu and select New Site .
3. If you need to change any of the site properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Site properties
All of these options can be found under your scanner's Edit Site menu. If necessary, the sub-menu and
option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Band plan
Edit Band Plan
Name
Edit Name
Quick key
Set Quick Key
Optional
Attenuator
Set Attenuator
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (3 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Hold time
Set Hold Time
Location information
Set LocationInfo
Lockout
Set Lockout
Startup key
Set Startup Key
Available operations
Delete Site
Delete a site
Create at least 1 frequency in each site
Each P25 system can contain up to 20 frequencies in each site, and all sites must contain at least 1
frequency.
1.
2.
3.
4.
On the Edit Site menu, select the site you just created.
Go to the Set Frequencies sub-menu and select New Frequency .
Enter at least 1 frequency for this site.
If you need to change any of the frequency properties, you can do that now. Unless a property
is Required , you can operate the system without changing the default settings.
Frequency properties
All of these options can be found by selecting the frequency under the Set Frequencies sub-menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option Name
Required
None
Recommended
None
Optional
Lockout
Set Lockout
Available Operations
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (4 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Delete a frequency
Delete Frequency
Programming a system for Scanning
Once you create the system and at least 1 site, you can Search the system with no problems. However,
if you want to Scan the system, you'll need to program the required elements in following order (click
here for information on using the menu):
Create at least 1 channel group
Each P25 system can contain up to 20 channel groups, and any system you want to scan must contain
at least 1 channel group.
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default settings.
Channel group properties
All of these options can be found by selecting the group name under your scanner's Edit Group menu.
If necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
None
Recommended
Name
Edit Name
Quick key
Set Quick Key
Optional
Location information
Set LocationInfo
Lockout
Set Lockout
Available operations
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (5 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Delete Group
Delete a group
Create at least 1 channel in each group
Each trunked system can contain up to 500 channels in each group, and all groups must contain at
least 1 channel.
1.
2.
3.
4.
On the Edit Group menu, select the channel group you just created.
Go to the Edit Channel menu and select New Channel .
Input the Talk Group ID (TGID) for this channel.
If you need to change any of the channel properties, you can do that now. Unless a property is
Required , you can operate the system without changing the default settings.
Channel properties
All of these options can be found by selecting the channel name your scanner's Edit Channel menu. If
necessary, the sub-menu and option name on each scanner are listed beside the property.
Property
Option name
Required
Edit Talk Group ID
TGID
Recommended
Name
Edit Name
Number tag
Set Number Tag
Optional
Alert
Set Alert
Lockout
Set Lockout
Priority
Set Priority
Volume Offset
Volume Offset
Available operations
Copy a channel
Copy Channel
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (6 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/StandardP25TrunkedSystems.html
Delete a channel
Delete Channel
The information on this page applies to the following scanner(s): BCD996XT BCD396XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...ts/temp/UnidenManBeta/StandardP25TrunkedSystems.html (7 of 7)4/7/2009 10:08:29 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html
Single-Frequency P25 Trunked Systems
Single-frequency P25 systems are almost identical to standard P25 systems, except they
only have one site per system and the system can use a P25 network address. Here is a
conceptual layout diagram of a single-frequency P25 system (click here for a legend of
the diagram).
●
●
Programming a Single-Frequency P25 System
❍ Create a system
■ System properties
■ Create exactly 1 site
■ Site properties
Programming a system for Scanning
❍ Create at least 1 channel group
■ Channel group properties
❍ Create at least 1 channel in each group
■ Channel properties
Programming a Single-Frequency P25 System
To program a single-frequency P25 system, you'll need to program the required elements
in following order (click here for information on using the menu):
Create a system
1.
2.
3.
4.
Go to the Program System menu and choose New System .
The scanner will prompt you for the System Type. Select P25 .
When the scanner prompts you confirm, tap YES .
The scanner creates the system with a default name. Select Edit Name if you want
to change it.
5. If you need to change any of the system properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default
settings.
System properties
file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (1 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html
(All of these options can be found under the Program System menu. If necessary, the submenu and the exact option name are listed beside each property.)
Required
None
Name (Edit Name)
Recommended
Network address (Edit Sys Option#P25 NAC Option)
Number tag (Edit Sys Option#Set Number Tag)
Automatic gain control (AGC) (Edit Sys Option#Set Audio
AGC)
Delay time (Edit Sys Option#Set Delay Time)
Optional
ID format (Edit Sys Option#Set ID Format (DEC/HEX) or
(AFS/DEC))
ID scan/search (Edit Sys Option#ID Scan/Search)
Copy system
Delete system
Available Operations Review Locked-Out IDs (Edit Sys Option#Rvw ID:Srch L/
O)
Clear All Locked-Out IDs (Edit Sys Option#Clr All L/O IDs)
Create exactly 1 site
Each single-frequency P25 system must contain exactly 1 site.
1.
2.
3.
4.
On the Program System menu, select the system you just created.
Go to the Edit Site menu and select New Site .
Select the Set Frequencies menu and enter the frequencies for this site.
If you need to change any of the site properties, you can do that now. Unless a
property is Required , you can operate the system without changing the default
file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (2 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html
settings.
Site properties
(All of these options can be found by selecting the site name under the Edit Site menu. If
necessary, the sub-menu and the exact option name are listed beside each property.)
Required
Frequencies (Set Frequencies)
Name (Edit Name)
Recommended
Number tag (Set Number Tag)
Quick key (Set Quick Key)
Attenuator (Set Attenuator)
Hold time (Set Hold Time)
Optional
Location information (Set LocationInfo)
Lockout (Set Lockout)
Startup key (Set Startup Key)
Available
Operations
Delete Site
Programming a system for Scanning
Once you create the system and site, you can Search the system with no problems.
However, if you want to Scan the system, you'll need to program the required elements
in following order (click here for information on using the menu):
Create at least 1 channel group
Each P25 system can contain up to 20 channel groups, and any system you want to scan
must contain at least 1 channel group.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (3 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html
1. On the Program System menu, select the system you just created.
2. Go to the Edit Group menu and select New Group .
3. If you need to change any of the channel group properties, you can do that now.
Unless a property is Required , you can operate the system without changing the
default settings.
Channel group properties
(All of these options can be found by selecting the group name under the Edit Group
menu. If necessary, the sub-menu and the exact option name are listed beside each
property.)
Required
None
Name (Edit Name)
Recommended
Quick key (Set Quick Key)
Location information (Set LocationInfo)
Optional
Lockout (Set Lockout)
Available
operations
Delete Group
Create at least 1 channel in each group
Each trunked system can contain up to 500 channels in each group, and all groups must
contain at least 1 channel.
1.
2.
3.
4.
On the Edit Group menu, select the channel group you just created.
Go to the Edit Channel menu and select New Channel .
Input the Talk Group ID (TGID) for this channel.
If you need to change any of the channel properties, you can do that now. Unless
a property is Required , you can operate the system without changing the default
settings.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (4 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SingleFrequencyP25TrunkedSystems.html
Channel properties
(All of these options can be found by selecting the channel name under the Edit Channel
menu. If necessary, the sub-menu and the exact option name are listed beside each
property.)
Required
TGID (Edit Talk Group ID)
Name (Edit Name)
Recommended
Number tag (Set Number Tag)
Alert (Set Alert)
Optional
Lockout (Set Lockout)
Volume Offset
Available
operations
Copy Channel
Delete Channel
This page applies to the following scanner(s): BCD996XT BCD396XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Do.../UnidenManBeta/SingleFrequencyP25TrunkedSystems.html (5 of 5)4/7/2009 10:08:30 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html
Radio Systems Overview
There are two basic types of radio systems: conventional systems and trunked systems.
●
●
Conventional radio systems
Trunked radio systems
❍ Trunked system basics
❍ How a trunked system works
❍ A real life example
Conventional radio systems
In a conventional radio system, each group of users is assigned one (for simplex systems) or two frequencies (for repeater systems). For example, the
police in your area might operate on 460.500 MHz, the fire department on 154.445 MHz, the highway department on 37.900 MHz, etc. All
transmissions from each group always go out on the on the same frequency--the police won't randomly switch to 500.000 MHz, for instance.
Since each group always stays on the same frequency and frequencies never overlap, it's very easy to follow conversations on conventional systems:
when your scanner stops on a frequency, you usually know who it is, and more importantly, you can stop on a channel and listen to an entire
conversation.
Up until the late 1980s, this was the primary way that radio systems operated. Some examples of conventional radio systems are
●
●
●
●
Aircraft
Amateur radio
FRS/GMRS users
Small, private radio systems
Trunked radio systems
Several major trends have converged that have resulted in agencies moving to more efficient trunked radio systems:
●
●
●
Higher levels of radio usage has meant that there arent enough individual frequencies available to allow every group to have their own
frequency.
Technology advances have brought down the overall cost and complexity of implementing a trunked radio system while increasing the
features available to the agency and individual radio users.
Roll-out of major statewide trunked systems makes it easier for even small agencies to piggy back onto the larger system for less cost than
replacing existing systems.
Trunked system basics
There are three major elements common to most trunked systems:
System Controller
The system controller is a special computer that assigns voice channels to users as they key up their radio. The controller is the brains
behind the trunking system.
Voice Frequency Pool
The voice frequency pool is a selection of radio frequencies available to the system controller for assigning voice traffic. By assigning
voice frequencies to channels only as they are needed, a trunked system can support many more channels than it actually has
frequencies.
Talk Group IDs
A Talk Group ID identifies which user or agency has been assigned a particular voice frequency at any particular moment. The Talk
Group ID is essentially the user's "channel": since each voice frequency is used over and over by all the agencies on the system,
trunked systems rely on the Talk Group ID to identify which particular user or agency is talking.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html (1 of 3)4/7/2009 10:08:35 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html
How a trunked system works
A typical communication on a trunked system goes something like this:
1. A user selects the channel they want to communicate on and presses the PTT button on the side of their radio.
2. This sends a channel request message to the controller that the user wants to start a transmission on the Talk Group ID (the channel) that they
selected.
3. The controller locates an unused voice frequency and assigns it to that Talk Group ID.
4. The controller then sends out a channel grant message to all radios on the system so everyone knows where to find the voice channel for that
Talk Group.
5. At this point, the original user's radio beeps, and the user can begin their transmission. While this sounds complicated, in real life this process
takes about half a second (sometimes less).
When the user releases the PTT button, the controller releases the voice frequency from its Talk Group ID assignment, leaving the frequency free for
the next user that becomes active.
A real life example
A typical 20-frequency trunked system can support hundreds of channels. For example, the Fort Worth system includes over 400 channels providing
communication support for Fort Worth agencies (Police, Fire and Ambulance) and agencies in the surrounding cities of Kennedale, North Richland
Hills, Forest Hill, Haltom City and Richland Hills. In addition, the same system also supports the Tarrant County Sheriff and Texas Christian
University. (You can see its setup in the RadioReference database.)
Before moving to the trunked system, the Police had only 6 channels (North, South, East, West, Information, and Tactical). Since moving to the
trunked system, they are now able to provide 11 channels for North Side PD alone: a main dispatch channel, three talkaround channels, a supervisor
channel, a bike patrol channel, and several community patrol channels. Other police districts have similar channel requirements, and now special
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html (2 of 3)4/7/2009 10:08:35 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html
operations teams such as SWAT, Narcotics, and Traffic each have one or more dedicated channels for their use as well.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/RadioSystemsOverview.html (3 of 3)4/7/2009 10:08:35 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.html
Deciphering Trunked Systems
●
Before you program a trunked system
❍ System Type
■ P25 Systems
■ LTR Systems
■ Motorola Systems
■ EDACS Systems
■ Conventional Systems
■ Non-scannable Systems
❍ System Voice
❍ System Frequencies
❍ Talk Group IDs (Channels)
Before you program a trunked system
To the average radio user, the complexity of a trunked system is invisible. Their radio is
programmed up at the radio shop. They can still easily select who they need to communicate
with by selecting a channel on their two-way. They can even directly call other radio users
without tying up a dispatch channelsomething they could never do before. As a scanner user,
on the other hand, you need to know the different types of trunking systems in use, what
options are available on each system, and three key pieces of information about any trunking
system before you start any actual programming:
●
●
●
System Type
System Frequencies
IDs of the Talk Groups you want to hear
All of this information is usually available from the online database at RadioReference. The
picture to the right shows a screenshot of a system from the database, with the pertinent
information highlighted.
file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (1 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.html
System Type
There are five major types of scannable systems; some of these also have subtypes. In the
RadioReference database, you can generally determine the radio system type by looking at the
line labeled System Type at the top of the screen (inside the red square in the screenshot).
file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (2 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.html
P25 Systems
These are identified in the RadioReference database as Project 25 Standard . If the System
Type line says anything else, then it is not a P25 system (even though it might have some P25
channels).
LTR Systems
These systems are identified as LTR Standard in the system type.
Motorola Systems
There are several subcategories of Motorola systems, but they will all have some form of
Motorola in the system type: Motorola Fleetnet , Motorola Smartnet , Motorola Smartzone ,
etc. Once you have identified that it is a Motorola system, you can check the system
frequencies to confirm its subtype:
●
●
●
●
Motorola 800: all of the frequencies are in the 800 MHz range
Motorola 900: all of the frequencies are in the 900 MHz range
Motorola UHF: all of the frequencies are between 400 and 512 MHz
Motorola VHF: all of the frequencies are between 100 and 200 MHz.
EDACS Systems
There are three subtypes of EDACS systems:
●
●
●
EDACS Wide: identified as EDACS Standard in the system type.
EDACS Narrow: identified as EDACS Narrowband in the system type.
EDACS SCAT: identified as EDACS Scat in the system type (these systems operate on
a single frequency).
Conventional Systems
This fifth type of scannable system is a general catchall for all non-trunked systems. See
Conventional Systems for more information.
Non-scannable Systems
There are several system types that cannot be monitored with a scanner, either because the
systems use proprietary digital formats that are not licensable by scanner manufacturers, or
because the systems are not in wide enough use to make it cost-effective for manufacturers to
file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (3 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.html
develop a scanner that can monitor them.
These non-scannable systems are identified in the system type as:
●
●
●
●
●
EDACS w/ESK
LTR Passport
OpenSky Standard
MPT1327
Tetra
System Voice
The other line inside the red square in the screenshot is System Voice , which summarizes the
kinds of voice modulation used on the system. Youll find the following voice types:
●
●
●
●
Analog (can be heard with any trunking scanner)
APCO-25 (can be heard with a digital scanner)
ProVoice (cannot be heard by any scanner)
VSELP (cannot be heard by any scanner)
The system voice also tells us
when digital channels are
mixed in with analog
channels on the same system.
Unfortunately, this means the
system voice line can cause a
lot of confusion. Just
remember: system voice does
not define the system type .
For example, in the system
information shown to the left,
we see that APCO-25 can be
used as a voice type on a Motorola system that is not actually a P25 system . When we're trying
to determine whether a system is a P25 system, we need to ignore the System Voice line and
focus on the System Type line. If there is P25 Voice on a non-P25 system, the scanner can sort
this out while scanning.
System Frequencies
The system frequencies section in the database lists all the frequencies used by the system (see
the blue square in the screenshot above on the right). For Motorola and P25 systems, you will
file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (4 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/DecipheringTrunkedSystems.html
need to program only the system control channel frequencies: those are the frequencies shown
in red (for primary control channels) and blue (for alternate control channels) in the database.
For EDACS and LTR systems, you will need to program all the listed frequencies and their
associated LCN (that is a small number right next to the frequency). Some systems have
multiple sets of frequencies. These are called multi-site systems: each set of frequencies
corresponds to a different physical antenna site.
Talk Group IDs (Channels)
The Talk Group information section (inside the green rectangle) shows the different channels
on the system and which agency uses them. You'll need to go through the list and make a note
of the channels you want to hear. Then you can start thinking about how you want to organize
those channels.
(Keep in mind that this screenshot shows just a few of the channels on a single system. One of
the great features available to subscribers on RadioReference is the ability to tag channels
directly on the site and print out a nicely-formatted hardcopy of each system. It makes this task
much, much easier.)
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT
Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Doc...nts/temp/UnidenManBeta/DecipheringTrunkedSystems.html (5 of 5)4/7/2009 10:08:39 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
Location-based Scanning
Location-based scanning allows you to control which systems/sites and channel groups are scanned based
on your exact location. This frees you from having to manually enable and disable systems or channel
groups as you change location.
To use Location-Based scanning, you need to have the following:
●
●
●
●
●
the location for the center point for each system/site or channel group you want to control
the radius or distance from the center point you want to set as the range for each system/site or
channel group
if you are scanning while traveling, you may want to include the heading (direction) of travel
some type of mapping method. If you don't want to use paper maps, you might try a mapping
software (such as Microsoft® Streets and Trips or Delorme® Street Atlas) that allows you to draw
markings and overlays on maps.
a GPS receiver with a serial data output (NMEA)
There are many different approaches you can use to determine where to place a center point for a system/
site or channel group. The two most common are the geopolitical approach and the antenna-centric
approach. For large trunked systems, you may find that a combination of these two approaches works best.
●
●
●
●
The Geopolitical Approach
The Antenna-Centric Approach
❍ Finding an antenna location
Combining for Efficiency
See Also
The Geopolitical Approach
With the
geopolitical
approach, you
want the
scanner to turn
on the system/
site or channel
group at the
limit of
relevance
rather than
reception. This
approach is
useful for
scanning
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (1 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
targets that
have a welldefined
jurisdiction
and their
transmission
are only
relevant when
you are within
that
jurisdiction.
To use the geopolitical approach, find the geographical center of the scanning target's territory (whether
city, county, district, precinct, or other agency jurisdiction), and set these coordinates as your center point
location. Then, adjust the range or radius to cover the boundaries of that target.
To use this method, use your chosen mapping application to zoom out so that the entire target is visible,
then, draw a circle that just covers the targets boundaries. Adjust the size of the circle to the nearest 1/2
mile increment.
Depending on the shape of the territory, you may have to choose between a lot of overlap or not covering
the entire area: jurisdiction, you might end up with a large amount of overlap. You'll have to decide which
radius that best suits your application.
For example, if your territory is a city, you'll have a lot of "extra" area if you use one single location:
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (2 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
On the other hand, if you sub-divide the area, you may end up with areas that are not covered:
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (3 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
The Antenna-Centric Approach
Using an antenna-centric approach, you set the physical antenna location as the system/sites center point
and the antenna's actual reach as the range.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (4 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
Finding an antenna location
You can find the physical location of antennas using the databases available at Radio Referenceor the
FCC's Antenna Structure Registration site. Both sites list the latitude, longitude, and height of the antenna,
and both sites can map the exact location for you. (Radio Reference is more user-friendly, so it's easier to
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (5 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
find what you're looking for.)
Combining for Efficiency
Because many trunked systems have both multiple antenna sites and multiple agencies with differing
geographic boundaries, you may want to combine the approaches:
1. Use the antenna centric approach at the site level: set the geographic coordinates of the antenna as
the central location for each site.
2. Use the geopolitical approach at the channel group level. Within the same system, set up a channel
group for each agency, and set the central point of the agency territory as the group location.
With both approaches combined into a single system, the scanner will now seamlessly switch between
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (6 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html
antenna sites as needed to keep the scanner tuning only to those sites you can receive well, and will also
turn channel groups on and off as you relocate to different jurisdictions.
See Also
Connecting a GPS receiver
Programming locations
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/LocationBasedScanning.html (7 of 7)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.html
Scanning Legally
Your scanner covers frequencies used by many different groups, including police and
fire departments, ambulance services, government agencies, private companies, amateur
radio services, military operations, pager services, and wireline (telephone and telegraph)
service providers.
It is legal to listen to almost every transmission your scanner can receive. However, there
are some transmissions that you should never intentionally listen to. These include:
●
●
●
Telephone conversations (cellular, cordless, or other private means of telephone
signal transmission)
Pager transmissions
Any scrambled or encrypted transmissions
According to the Electronic Communications Privacy Act (ECPA), you are subject to
fines and possible imprisonment for intentionally listening to, using, or divulging the
contents of such a conversation unless you have the consent of a party to the
conversation (unless such activity is otherwise illegal).
This scanner has been designed to prevent the reception of cellular telephone
transmissions and the decoding of scrambled transmissions. This is done to comply with
the legal requirement that scanners be manufactured so they are not easy to modify to
pick up these transmissions. Do not open your scanners case to make any modifications
that could allow it to pick up transmissions that are illegal to monitor. Modifying or
tampering with your scanners internal components or using it in a way other than as
described in the manual could invalidate your warranty and void your FCC authorization
to operate it.
In some areas, mobile and/or portable use of this scanner is unlawful or requires a
permit. Check the laws in your area. It is also illegal in many areas (and a bad idea
everywhere) to interfere with the duties of public safety officials by traveling to the
scene of an incident without authorization.
Digital Scanners Only: A license is required to use this product in
Canada!
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.html (1 of 2)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.html
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ScanningLegally.html (2 of 2)4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GeneralPrecautions.html
General Precautions
Before you use this scanner, please read and observe the following:
Earphone Warning
You can use an optional 32Ω stereo headset or earphone with your scanner. Use of an
incorrect earphone or headset might be potentially hazardous to your hearing. The output
of the phone jack is monaural, but you will hear it in both headphones of a stereo
headset.
Set the volume to a comfortable audio level coming from the speaker before plugging in
the earphone or headset. Otherwise, you might experience some discomfort or possible
hearing damage if the volume suddenly becomes too loud because of the volume control
or squelch control setting. This might be particularly true of the type of earphone that is
placed in the ear canal.
Liquid Exposure Warning
Uniden does not represent this unit to be waterproof. To reduce the risk of fire or
electrical shock, do not expose this unit to rain or moisture!
Power Disconnection Caution
Important: Always turn the scanner off before disconnecting external power. Some
settings are saved only as the scanner is powering down.
This topic applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GeneralPrecautions.html4/7/2009 10:08:42 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html
FCC Information
The FCC Wants You to Know
IMPORTANT! This scanning radio has been manufactured so that it will not tune to the
radio frequencies assigned by the FCC for cellular telephone usage. The Electronic
Communications Privacy Act of 1986, as amended, makes it a federal crime to
intentionally intercept cellular or cordless telephone transmissions or to market this radio
when altered to receive them. The installation, possession, or use of this scanning radio
in a motor vehicle may be prohibited, regulated, or require a permit in certain states,
cities, and/or local jurisdictions. Your local law enforcement officials should be able to
provide you with information regarding the laws in your community.
For more details, see Scanning Legally.
Modification Notice
Changes or modifications to this product not expressly approved by Uniden, or operation
of this product in any way other than as detailed by this User's Guide, could void your
authority to operate this product.
Part 15 Information
This scanner has been tested and found to comply with the limits for a scanning receiver,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This scanner
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
There is no guarantee that interference will not occur in a particular installation. If this
scanner does cause harmful interference to radio or television reception, which can be
determined by turning the scanner on and off, you are encouraged to try to correct the
interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html (1 of 2)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html
●
Increase the separation between the scanner and the receiver
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may
cause undesired operation.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/FCCInformation.html (2 of 2)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/WarrantyAndSupportInformation.html
Warranty and Support Information
Support Information
Information
online
www.uniden.com
Email support
http://mycusthelp.com/uniden
Phone support
(800) 297-1023 (during regular business hours, Central
time)
One-Year Limited Warranty
This warranty text applies to the following scanners:
●
●
●
●
BCD396XT
BC346XT
BCD996XT
BCT15X
If your scanner is not listed, the warranty information below may not
apply.
Important: Evidence of original purchase is required for warranty
service!
WARRANTOR: UNIDEN AMERICA CORPORATION (Uniden)
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail
owner, this Uniden Product to be free from defects in materials and craftsmanship with
only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original user shall terminate and be of
no further effect 12 months after the date of original retail sale. The warranty is invalid if
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...emp/UnidenManBeta/WarrantyAndSupportInformation.html (1 of 3)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/WarrantyAndSupportInformation.html
the Product is
(A) damaged or not maintained as reasonable or necessary,
(B) modified, altered, or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden,
(C) improperly installed,
(D) serviced or repaired by someone other than an authorized Uniden
service center for a defect or malfunction covered by this warranty,
(E) used in any conjunction with equipment or parts or as part of any
system not manufactured by Uniden, or
(F) installed or programmed by anyone other than as detailed by the
Operating Guide for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this
warranty at any time while this warranty is in effect, warrantor will repair the defect and
return it to you without charge for parts, service, or any other cost (except shipping and
handling) incurred by warrantor or its representatives in connection with the
performance of this warranty. THE LIMITED WARRANTY SET FORTH ABOVE IS
THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS
IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE
WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION
OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS
WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR
PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do
not allow this exclusion or limitation of incidental or consequential damages so the
above limitation or exclusion might not apply to you.
LEGAL REMEDIES: This warranty gives you specific legal rights, and you might also
have other rights which vary from state to state. This warranty is void outside the United
States of America.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, after
following the instructions in this Operating Guide you are certain that the Product is
defective, pack the Product carefully (preferably in its original packaging). Include
evidence of original purchase and a note describing the defect that has caused you to
return it. The Product should be shipped freight prepaid, by traceable means, or
delivered, to warrantor at:
Uniden America Corporation Parts and Service Division 4700 Amon
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...emp/UnidenManBeta/WarrantyAndSupportInformation.html (2 of 3)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/WarrantyAndSupportInformation.html
Carter Boulevard Fort Worth, TX 76155
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BCD346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...emp/UnidenManBeta/WarrantyAndSupportInformation.html (3 of 3)4/7/2009 10:08:43 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UserGuideInformation.html
User Guide Information
Illustrations in this guide are used for explanation purposes only. Your scanner may not
match the illustrations exactly.
All content (including any media) contained within in this guide is copyright 2009 by
Uniden America Corporation unless otherwise specified. Any content not belonging to
Uniden America is marked as such and used with permission.
Content or information in external sources are neither the intellectual property not the
responsibility of Uniden America Corp. Uniden America makes no claim to the accuracy
or completeness of external content.
Screen grabs used in most examples are provided with the permission of RadioReference.
com
Astro®, DPL®, Digital Private Line®, Motorola®, PL®, PRIVACY PLUS®, Private
Line®, SMARTNET®,and SMARTZONE® are registered trademarks of Motorola, Inc.
LTR® is a registered trademark of E.F. Johnson Co.
EDACS® is a registered trademark of M/A-COM Private Radio Systems Inc.
Uniden® and Bearcat® are registered trademarks of Uniden America Corporation.
TrunkTracker™, Trunk Tracking™, and Close Call™ are proprietary trademarks of
Uniden America Corporation.
Other trademarks used throughout this manual are the property of their respective
holders.
Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UserGuideInformation.html4/7/2009 10:08:44 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
BCD996XT Specs
To determine whether the information on this page applies to your scanner, see the
tags at the bottom of the page.
●
●
●
Certified in accordance with FCC Rules and Regulations Part 15 Subpart C as of date of
manufacture. (See FCC Information for more details.)
FCC ID: AMWUB360
BCD996XT Specs
❍ General
❍ Frequency Range
❍ Special Functions
■ Band Scope Function
■ Two-Tone-Sequential
■ WX Alert
❍ Supported trunking systems
❍ Dynamic memory allocation capacity
❍ Heterodyne System
❍ CTCSS and DCS Tones
General
Attenuation
Audio Output Power
20dB nominal
3W nominal into 8Ω speaker
30mW nominal into 32Ω stereo headphone
Scan Rate
Search Rate
External Jacks
100 channels per second max (Conventional mode)
300 steps per second max (5kHz steps only)
Antenna Jack: BNC Type
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (1 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
Phone Jack: 3.5mm (1/8 in.) Stereo Type
Ext.SP Jack: 3.5mm (1/8 in.) Monaural Type
REC.Out Jack: 3.5mm (1/8 in.) Stereo Type
Ext. DC Power and Orange Wire Jack 3 pin (Center Orange
Wire)
DC Power Jack: 5.5mm (1/5 in.) (Center Positive)
GPS/Remote Interface Jack: D Sub 9pin Male Type
Remote Interfase Jack (front panel): 4-pin Mini Custom Type
Internal Speaker
Power Requirements
8.0Ω 5.0W Max. 77mm (3.0 in.)
DC:11V to 16.6V(Ext.DC Power Jack or DC Power Jack)
AC Adapter (13.8V DC 750mA Regulated) (AD-1009)
Operating
Temperature
Nominal: -20°C to +60° -4°F to +140°F
Close Call: -10°C to +60°C +14°F to +140°F
Size
Weight
Remote Functions
7.2 in.(W) x 5.9 in.(D) x 2.2 in.(H)
3.44 lbs
Direct PC control
Database management
Wired cloning
Display
64 x 128 Full Dot Matrix LCD with multi-color back light
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (2 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
Sensitivity (nominal) 12dB SINAD
0.3•V
25-27.995 MHz
AM
0.3•V
28-53.98 MHz
NFM
0.5•V
54-71.95 MHz
WFM
0.2•V
72-75.995 MHz
FM
0.5•V
76-107.9 MHz
FMB
0.3•V
108-136.9916
MHz
AM
0.2•V
137-173.9875
MHz
NFM
0.5•V
174-215.95 MHz
WFM
0.3•V
216-224.98 MHz
NFM
0.3•V
225-379.975 MHz
AM
0.3•V
380-512 MHz
NFM
0.3•V
758-960 MHz
NFM
0.4•V
1240-1300 MHz
NFM
Signal Noise Ratio (nominal)
49dB
25-27.995 MHz
AM
41dB
28-53.98 MHz
NFM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (3 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
54dB
54-71.95 MHz
WFM
48dB
72-75.995 MHz
FM
60dB
76-107.9 MHz
FMB
50dB
108-136.9916
MHz
AM
41dB
137-173.9875
MHz
NFM
54dB
174-215.95 MHz
WFM
41dB
216-224.98 MHz
NFM
50dB
225-379.975 MHz
AM
40dB
380-512 MHz
NFM
41dB
758-960 MHz
NFM
37dB
1240-1300 MHz
NFM
Close Call Sensitivity
(nominal)
140•V
VHF Low1 Band
100•V
VHF Low2 Band
80•V
Air Band
80•V
VHF High1 Band
90•V
VHF High2 Band
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (4 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
110•V
UHF Band
180•V
800MHz+ Band
Frequency Range
Frequency Range
(MHz)
Modulation
Step
(kHz)
Name
25.0000-26.9600
AM
Petroleum Products &
Broadcast Pickup
26.9650-27.4050
AM
CB Class D Channel
27.4100-27.9950
AM
Business & Forest Products
28.0000-29.6800
NFM
20
10 Meter Amateur Band
29.7000-49.9900
NFM
10
VHF Low Band
50.0000-53.9800
NFM
20
6 Meter Amateur Band
54.0000-71.9500
WFM
50
VHF TV
72.0000-75.9950
FM
Intersystem & Astronomy
76.0000-87.9500
WFM
50
VHF TV
88.0000-107.9000
FMB
100
FM Broadcast
108.0000-136.9916
AM
8.33
Aircraft Band
137.0000-143.9875
NFM
12.5
Military Land Mobile
144.0000-147.9950
NFM
2 Meter Amateur Band
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (5 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
148.0000-150.7875
NFM
12.5
Military Land Mobile
150.8000-161.9950
NFM
VHF High Band
162.0000-173.9875
NFM
12.5
Federal Government
174.0000-215.9500
WFM
50
VHF TV
216.0000-224.9800
NFM
20
1.25 Meter Amateur Band
225.0000-379.9750
AM
25
Military Aircraft Band
380.0000-399.9875
NFM
12.5
Military Land Mobile
400.0000-405.9875
NFM
12.5
Miscellaneous
406.0000-419.9875
NFM
12.5
Federal Government Land
Mobile
420.0000-449.9875
NFM
12.5
70 cm Amateur Band
450.0000-469.9875
NFM
12.5
UHF Standard Band
470.0000-512.0000
NFM
12.5
UHF TV
758.0000-775.99375
NFM
6.25
Public Service Band
788.0000-805.99375
NFM
6.25
Public Service Band
806.0000-823.9875
NFM
12.5
Public Service Band
849.0125-868.9875
NFM
12.5
Public Service Band
894.0125-960.0000
NFM
12.5
Public Service Band
1240.0000-1300.0000
NFM
25
25 cm Amateur Band
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (6 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
Special Functions
Band Scope Function
●
●
Frequency Span 0.2 MHz To 500 MHz
Frequency Step 5 kHz To 100 kHz
Two-Tone-Sequential
●
250.0-3500.0Hz , 0.1Hz Step Programmable
WX Alert
●
●
1050 Hz Tone System
NWR-SAME System (Warning / Watch / Statement)
Supported trunking systems
●
●
●
●
Motorola Systems: Type I, II, II/I (hybrid)
EDACS Systems: FM, NFM, and SCAT
LTR Systems
APCO Systems: Astro Imbe, Astro 25
Dynamic memory allocation capacity
●
●
●
●
●
Systems: 500 max
Groups: 20 per system
Site: 1000 max (All) 256 per system
Channels: 25000 max (40128 memory blocks)
Channels per Trunked System: 500 max
Heterodyne System
●
●
●
1st IF: 380.7 to 380.8 MHz / 265.5 to 265.6 MHz
2nd IF: 10.8 MHz
3rd IF: 450 kHz
CTCSS and DCS Tones
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (7 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
CTCSS Tone Frequencies - 50 frequencies total (Hz)
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
DCS Tone Codes - 104 codes total
023
025
026
031
032
036
043
047
051
053
054
065
071
072
073
074
114
115
116
122
125
131
132
134
143
145
152
155
156
162
165
172
174
205
212
223
225
226
243
244
245
246
251
252
255
261
263
265
266
271
274
306
311
315
325
331
332
343
346
351
356
364
365
371
411
412
413
423
431
432
445
446
452
454
455
462
464
465
466
503
506
516
523
526
532
546
565
606
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (8 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html
612
624
627
631
632
654
662
664
703
712
723
731
732
734
743
754
This page applies to the following scanners: BCD996XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTSpecs.html (9 of 9)4/7/2009 10:08:46 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
Available Operation Modes
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
The scanner has several different operation modes; in each mode, the scanner's
operation, display, and key functions can be completely different:
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Scan mode
Search mode
Hold mode
Close Call Priority mode
Close Call Only mode
Close Call Do Not Disturb mode
Priority Scan mode
Priority Plus Scan mode
GPS mode
Weather mode
Weather Priority Mode
Weather Alert mode
Tone Out mode
Band Scope mode
Scan mode
The scanner checks each frequency in the user-programmed list of frequencies. For
trunked systems, it checks each Talk Group ID in the user-programmed list. When it
detects a signal, the scanner stays on the channel and opens squelch. For trunked
systems, if the Talk Group ID becomes active, the scanner switches to the audio channel
and opens squelch. When the signal stops, the scanner continues the scan.
For information about key operation and other specifics about Scan Mode:
●
●
BCD396XT and BC346XT: Hand Held Scanner Scan Mode
BCD996XT: BCD996XT Scan Mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (1 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
●
BCT15X: BCT15X Scan Mode
To enter Scan mode, tap SCAN. (This is the default mode when the
scanner powers on.)
Search mode
The scanner checks each frequency that falls within a user-programmed range. For
trunked systems, it checks each control channel in the user-programmed list. When it
detects a signal, the scanner stays on the channel and opens squelch. For trunked
systems, when it detects an active Talk Group ID, the scanner switches to the audio
channel and opens squelch. When the signal stops, the scanner continues the search.
For information about key operation and other specifics about Scan Mode:
●
●
●
BCD396XT and BC346XT: Hand Held Scanner Search Mode
BCD996XT: BCD996XT Search Mode
BCT15X: BCT15X Search Mode
To enter Search mode, FUNCTION+ tap SCAN . The scanner asks if you
want to perform the Quick Search: tap YES if this is the search you want.
To start a different search, tap NO: the scanner takes you to the Search
for... menu, and you can select your search.
Hold mode
The scanner stays on the current channel and enables save and edit options (options vary
depending on the type of system).
For more information about key operation and other specifics about hold mode:
●
●
●
●
BCD396XT: BCD396XT Hold Mode
BCD996XT: BCD996XT Hold Mode
BC346XT: BC346XT Hold Mode
BCT15X: BCT15X Hold Mode.
To enter Hold mode, tap HOLD.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (2 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
Close Call Priority mode
In Close Call Priority, the scanner interrupts its current operation every 2 seconds,
searches for signals that are stronger than other signals on the selected band, then returns
to the previous operation. When it detects a close call hit, the scanner can switch to the
channel and open squelch (depending on the setting). In Close Call DND (do-notdisturb) mode, the scanner only interrupts if it is not already receiving audio.
For more information about key operation and other specifics about Close Call mode:
●
●
●
BCD396XT or BC346XT: Handheld Scanner Close Call Mode
BCD996XT: BCD996XT Close Call Mode
BCT15X: BCT15X Close Call Mode
To enter Close Call mode on the BCD396XT or BC346XT, FUNCTION
+ repeatedly tap HOLD until Close Call Pri appears.
To enter Close Call mode on the BCD996XT, repeatedly tap the SQ knob
until Close Call Pri appears.
To enter Close Call mode on the BCT15X, Function + repeatedly tap the
SQ knob until Close Call Pri appears.
The Close Call icon appears for Close Call Priority mode and is in reverse
colors for Close Call DND mode.
Close Call Only mode
The scanner stops the current operation and only performs Close Call checks as
described above.
For more information about key operation and other specifics about Close Call Only
mode:
●
●
●
BCD396XT or BC346XT: Handheld Scanner Close Call Only Mode
BCD996XT: BCD996XT Close Call Only Mode
BCT15X: BCT15X Close Call Only Mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (3 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
To enter Close Call only mode on the BCD396XT or BC346XT,
FUNCTION + press & hold HOLD.
To enter Close Call only mode on the BCD996XT, press and hold the SQ
knob.
To enter Close Call only mode on the BCT15X, FUNCTION + press &
hold the SQ knob.
Close Call Do Not Disturb mode
When set in this mode, the scanner will periodically make Close Call checks whenever
the scanner is not receiving audio in another mode. This eliminates the annoying breaks
in conversation while still allowing for the Close Call functionality. In Close Call Do
Not Disturb mode, the Close Call icon appears in reversed color.
For more information about key operation and other specifics about Close Call Do Not
Disturb mode:
●
●
●
BCD396XT or BC346XT: Handheld Scanner Close Call Mode
BCD996XT: BCD996XT Close Call Mode
BCT15X: BCT15X Close Call Mode
To enter Close Call Do Not Disturb mode on the BCD396XT or
BC346XT, FUNCTION + repeatedly press HOLD until Close Call DND
appears
To enter Close Call Do Not Disturb mode on the BCD996XT, repeatedly
press the SQ knob until Close Call DND appears.
To enter Close Call Do Not Disturb mode on the BCT15X, FUNCTION
+ repeatedly press the SQ knob until Close Call DND appears.
Priority Scan mode
At a specified interval, the scanner interrupts its current operation, checks the userdesignated conventional priority channels, then resumes the previous operation. You can
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (4 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
set the interval for priority scan checks. If
For more information about key operation and other specifics about Priority Scan mode,
see Priority Scan.
To enter Priority Scan mode on the BCD396XT or BC346XT:
1. Enter Hold mode.
2. FUNCTION + tap NO.
To enter Priority Scan mode on the BCD996XT, press PRI while
scanning.
To enter Priority Scan mode on the BCT15X, FUNCTION + press POL/
PRI while scanning.
If no conventional channels in enabled and unlocked systems are designated as priority,
the scanner will display Priority Scan No Channel.
For trunked priority channels, you need to enable priority scanning in the system option
menu as well as tagging the channel as priority. Trunked priority only works while
scanning that system's control channel or (in the case of Motorola systems) when the
scanner is scanning any channel in the system.
Priority Plus Scan mode
The scanner stops the current operation and only performs Priority Scan checks as
described above.
To enter Priority Plus Scan mode on the BCD396XT or BC346XT:
1. Enter Hold mode.
2. FUNCTION + repeatedly tap NO until the scanner displays
Priority Mode Plus On.
To enter Priority Plus Scan mode on the BCD996XT, while scanning
repeatedly press PRI until the scanner displays Priority Mode Plus On.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (5 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
To enter Priority Plus Scan mode on the BCT15X:
1. Enter Hold mode.
2. FUNCTION + repeatedly tap POL/PRI until the scanner displays
Priority Mode Plus On.
GPS mode
(Requires a connected GPS receiver.) The scanner displays longitude, latitude, and
heading information.
For more information about key operation and other specifics about GPS mode:
●
●
●
For the BCD396XT or BC346XT: Handheld GPS Mode
For the BCD996XT: BCD996XT GPS Mode
For the BCT15X: BCT15X GPS Mode
To enter GPS mode on the BCD396XT or BC346XT, FUNCTION + tap
GPS.
To enter GPS mode on the BCD996XT or BCT15, tap GPS.
Weather mode
The scanner checks each of the 10 National Weather Radio channels and opens squelch
when it detects a signal. When the signal stops, the scanner continues checking the other
weather channels. For more information about Weather Mode, see Weather Mode.
To enter Weather mode on the BCD396XT or BC346XT, FUNCTION +
press & hold WX.
To enter Weather mode on the BCD996XT, press & hold WX.
To enter Weather mode on the BCT15X, FUNCTION + press and hold
GPS/WX.
Weather Priority Mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (6 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
In Weather Priority mode, the scanner interrupts scanning every 5 seconds to check for
an alert. If an alert tone is present, the scanner sounds an alert tone, then stays on the
weather channel so you can hear the alert. For more information about Weather Priority
Mode, see Weather Mode.
To enter Weather Priority mode on the BCD396XT or BC346XT,
FUNCTION + tap WX.
To enter Weather Priority mode on the BCD996XT, tap WX.
To enter Weather Priority mode on the BCT15X, FUNCTION + tap GPS/
WX.
Weather Alert mode
This is similar to Weather mode: the scanner checks each of the 10 National Weather
Radio channels and stays on a channel when it detects a signal. However, in Weather
Alert mode, the scanner only opens squelch if it detects the EAS alert tone. For more
information about Weather Alert Mode, see Weather Mode.
To enter Weather Alert mode on the BCD396XT or BC346XT:
1. Enter Weather mode.
2. FUNCTION+ tap WX.
To enter Weather Alert mode on the BCD996XT:
1. Enter Weather mode.
2. Tap WX .
To enter Weather Alert mode on the BCT15X:
1. Enter Weather mode.
2. FUNCTION + tap GPS/WX.
Tone Out mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (7 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
The scanner checks up to 10 user-programmed channels for two-tone sequential, single,
or group paging tones. When it detects a tone that matches the configuration for that
channel, the scanner displays the tone information and opens squelch. For more
information about Tone Out Mode:
●
●
●
BCD396XT or BC346XT: Hand Held Tone-Out Mode
BCD996XT: BCD996XT Tone-Out Mode
BCT15X: BCT15X Tone-Out Mode
To enter Tone Out mode, tap MENU , then scroll down and select ToneOut for...
To exit Tone Out mode, enter Scan mode.
Band Scope mode
The scanner searches a frequency ranges and displays a visual representation of the
signal level. For more information about Band Scope Mode:
●
●
●
BCD396XT or BC346XT: Hand Held Band Scope Mode
BCD996XT: BCD996XT Band Scope Mode
BCT15X: BCT15X Band Scope Mode
To enter Band Scope Mode:
1. Set one of the 3 search keys to a Band Scope search.
2. Enter Search mode.
3. Press & hold the designated search key.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (8 of 8)4/7/2009 10:08:47 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTMenuTree.html
Menu tree
BCD996XT main menu
●
●
●
●
●
●
●
●
●
●
Program System
Program Location
Srch/CloCall Opt
Search for...
Close Call
Priority Scan
WX Operation
Tone-Out for...
Wired Clone
Settings
Using the menu
●
●
●
●
●
●
To open the menu, tap MENU .
Turn the SELECT knob to move the cursor and highlight menu items. The
currently highlighted item appears in reversed-out text.
To select the highlighted item or confirm an option setting, tap E-YES or press
down on the SELECT knob.
To cancel an option setting, press NO .
To go back one level in the menu, tap MENU .
To exit the menu, press LOCKOUT . The scanner goes back to the operating
mode it was in before you entered the menu.
This page applies to the following scanner(s): BCD996XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTMenuTree.html4/7/2009 10:08:48 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html
Keys and their functions
●
●
●
Key Overview
Operating the controls
❍ Using the FUNCTION button
Key functions in different operation modes
Key Overview
The diagram below shows the keys and what they are called throughout the guide:
Operating the controls
Each button has at least two different actions which you control using the key combinations explained below.
●
●
●
●
●
●
Tap : press the button and release it immediately
Double tap : press the button twice, as quickly as possible (within 1 second)
Press & hold : press the button and keep it pressed for at least 2 seconds before releasing it
FUNCTION + tap : press and release FUNCTION , then tap the button
FUNCTION + Double tap : press and release FUNCTION , then double tap the button
FUNCTION + Press & hold : press and release FUNCTION , then press and hold the button
Using the FUNCTION button
When you tap FUNCTION (the scroll knob), the scanner remembers the FUNCTION + key combination for the next 3 seconds; during this time, it displays an F icon at the top of the screen.
If you want the scanner to maintain the FUNCTION + key combination longer, press & hold FUNCTION. The scanner remembers the FUNCTION + key combination until the next time you
tap FUNCTION; during this time, it displays Function Key Holding and flashes the F icon at the top of the screen.
Key functions in different operation modes
The keys have different functions in each operation mode:
●
●
●
●
Scan and Search mode key functions
Hold mode key functions
Close Call mode key functions
Priority Scan mode key functions
file:///C|/Documents%20and%20Settings/POpitz/My%20D...mp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html (1 of 2)4/7/2009 10:08:50 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html
●
●
●
●
GPS mode key functions
Tone Out mode key functions
Band Scope mode key functions
Available functions in Key Safe mode
This page applies to the following scanner(s): BCD996XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20D...mp/UnidenManBeta/BCD996XTKeysAndTheirFunctions.html (2 of 2)4/7/2009 10:08:50 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
Reading the display
The display icons vary depending on the status of the scanner and what youre doing at
any given time. The diagram shows common icon locations, and table below lists the
most common icons and their meanings:
Attenuator icon
Steady: The attenuator is turned on for the current
channel.
Blinking: The attenuator is turned on globally (for all
channels).
Battery level icon
x.xx: The remaining battery voltage is displayed in
place of the Xs.
Blinking icon: The battery is low. (If the AC adapter is
connected while the icon is blinking, the battery is
incorrectly installed, is the wrong type, or has gone
bad.)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (1 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
Channel info icon
This icon has several available states:
●
●
●
●
●
●
●
Close call icon
P25: The received signal is digitized voice
(APCO P25)
LNK: The current channel is configured as a
voice channel, but the scanner is receiving data
on it.
DAT: The current channel is configured as a
control channel, and the scanner is receiving
data on it.
ENC: The received signal is encrypted P25
digitized voice, and the scanner has muted the
audio.
Cxx.x: The scanner has detected a CTCSS
code; the received code is displayed in place of
the Xs.
DCSxxx: The scanner has detected a DCS code;
the received code is displayed in place of the
Xs.
PNxxxx: The scanner has detected a P25
network address code (NAC); the received code
is displayed in place of the Xs.
Normal (open) icon:
●
●
Steady: Close call priority mode is on.
Blinking: Close Call Only mode is on, or the
scanner has detected a close call signal.
Reversed (filled) icon:
●
●
Steady: Close call DND mode is on.
Blinking: Close call DND mode is on, and the
scanner has detected a close call signal.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (2 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
Function icon
Steady: You tapped the FUNCTION key; the scanner
will remember the FUNCTION + key combination for
the next 3 seconds.
Blinking: You pressed & held the FUNCTION key:
the scanner will remember the FUNCTION + key
combination until you tap FUNCTION again.
Group number line (GRP) In Scan mode: The group Quick Key numbers (GQK)
of any unlocked groups in the current system or site
are displayed on this line. The GQK number of the
group that is currently being scanned blinks.
In Hold mode: This line displays the GQK number of
the current group only.
In Custom Search mode: The numbers of any
programmed search ranges are display on this line. The
number of the custom range that is currently being
searched blinks.
Hold icon The scanner is in Hold mode.
IFX icon
Keypad lock (or GPS)
icon
Lockout icon
Modulation icon
Priority icon
Priority scan icon (PRI)
You switched to the intermediate frequency (IF
exchange).
: The keypad is locked.
GPS: The scanner is receiving data from the GPS
device.
The current channel is locked out.
This icon displays the modulation type of the current
channel: AM, FM, NFM, FMB, or WFM.
The current channel is set as a priority channel.
Steady: Priority scan is turned on.
Blinking: Priority Plus scan is turned on.
REP icon
The Repeater Find feature is turned on.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (3 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html
Signal level icon
System number line (Sx:)
This icon displays the strength of the current signal;
the icon ranges from zero bars (no signal) to five bars
(strong signal).
In Scan mode: The system/site Quick Key numbers
(SQK) of any unlocked systems or sites are displayed
on this line. The SQK number of the system or site that
is currently being scanned blinks. For SQK numbers
above 9, the tens digit replaces the X in the icon; the
ones digits are shown on this line.
In Hold mode: This line displays the SQK number of
the current system or site only. For SQK numbers
above 9, the tens digit replaces the X in the icon; the
ones digit is displayed on this line.
In Service Search mode: The icon SCR replaces the
System numbers if the broadcast screen feature is
turned on.
Weather alert icon
Weather Alert Priority scan is turned on.
Special displays
In some operation modes, the display can be very different from the main display. These
modes also have 2 or 3 different displays you can cycle through.
●
●
●
Band Scope mode display
Hold mode displays
GPS mode display
This page applies to the following scanner(s): BCD396XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ReadingTheDisplay.html (4 of 4)4/7/2009 10:08:51 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html
●
●
Included With Your Scanner
Setting Up Your Scanner
❍ Power Related Issues
❍ Base Station
❍ Setting Up an Audio Recording Device or Computer Recording
❍ Vehicle Installation
■ Mounting Using the Bracket
■ Mounting Using the DIN-E Sleeve (Option for BCT15X)
■ Removing the Scanner from the DIN-E Sleeve
■ Mounting Using ISO Technique
❍ Removing the Display Sticker
❍ Connecting an Optional Antenna
❍ Connecting an Earphone/Headphone
❍ Connecting an Extension Speaker
Included With Your Scanner
Vehicle Accessory Power Cord
AC Adapter
Scanner
Three-Wire Harness
Mounting Bracket and Hardware
Antenna
O/M on CD ROM
Serial Programming Cable
Other Printed Materials
Setting Up Your Scanner
These guidelines will help you install and set up your new scanner:
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (1 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html
The scanner can be placed on a convenient surface in your home as a base station, and connected to a standard outlet that supplies 120VAC, 60Hz. You must use
either the supplied antenna or an electrically correct outdoor antenna, properly and safely mounted at your chosen site.
The scanner is also designed to accommodate either DIN-E and ISO-DIN automotive mounting configurations. A DIN-E sleeve and keys, (Part Number DIN0001) are optional and available from Uniden.
The unit can also be placed above, beneath, or in the dash of your vehicle using the supplied bracket and mounting hardware.
●
●
●
●
●
If your scanner receives interference or electrical noise, move the scanner or its antenna away from the source.
To improve the scanner’s reception, use an optional external antenna designed for multi-band coverage. (You can purchase this type of antenna at a local
electronics store). If the optional antenna has no cable, use 50-75 Ω coaxial cable for lead-in. A mating plug might be necessary for the optional antennas.
Use an optional mono earphone or mono headset with proper impedance (32 Ω) for private listening. Read the precautions at General Precautions.
Do not use the scanner in high-moisture environments such as the kitchen or bathroom.
Avoid placing the scanner in direct sunlight or near heating elements or vents.
Power Related Issues
Important: To prevent memory from being corrupted, do not unplug the AC adapter during the time the memory is accessed for programming or auto store.
Notes:
●
●
If when you connect the AC adapter the [VOL] /Power Switch is ON, the scanner may not power on. Should this occur, simply turn the control OFF, then
ON again.
If the scanner loses power (as when you turn off your car’s ignition with the scanner’s power switch on), it can lose some system settings such as display
color and backlight. To ensure that such settings persist, either change thesetting using the scanner’s menu or power the scanner off then back on using the
power switch after making such setting changes.
When you turn off the scanner using the power switch, the scanner remembers the last settings and mode. When you turn power back on, it resumes the previous
mode.
Base Station
This is the simplest approach to let you get started quickly. Decide on a location that is convenient to a nearby wall outlet, has desk space to let you complete
your programming worksheets, will safely allow the indoor antenna to be extended, or near a window to use an outdoor antenna.
To secure the radio to a surface, by means of the mounting bracket, follow the steps below:
1. Attach the four protective mounting feet to the mounting bracket when you casually use the scanner on a flat surface. Should you desire to permanently
mount the scanner, remove the feet and use wood screws through the bracket as described in Steps 2 and 3.
2. Use the bracket as a template to mark positions for the two mounting screws.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (2 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html
3. At the marked positions, drill holes slightly smaller than the screws.
4. Align the bracket with the threaded holes on the sides of the radio case so the bracket is beneath the radio. Secure the bracket using the two threaded
knobs. Never overtighten the knobs.
Once the radio is positioned, connect it to a source of AC power using the supplied 13.8V, 750 mA AC adapter. Insert the barrel of the AC adapter to the jack on
the rear, upper right side of the radio marked. Insert the connector of the supplied indoor telescoping antenna to the BNC Antenna Connector and apply moderate
pressure to secure it.
Setting Up an Audio Recording Device or Computer Recording
It is best if you plan ahead when you initiate the basic setup of the scanner if you include the components to record incoming reception. You need an audio
recording device which can be controlled by a Voice Operated module (VOX) either externally or from within the unit and the correct connecting cable. The
REC (record) jack on the rear apron provides a constant-level audio output which is not affected by the setting of the volume control. Use a mono or stereo cable
that ends in a 3.5mm plug for the scanner. The recorder might have its own requirements as to the proper plug. Check the recorder’s instructions to be sure.
Connect the cable to an external or internal VOX control so that the recorder operates when audio is present.
You can also connect the cable to the appropriate input jack on your PC so that with controlling software, you can record to your hard disk.
In order for the function to operate, you must set the channel to record. You must also set the system’s record option to either All Channel, which will record all
channels regardless of any channel’s setting, or Marked Channel which only lets recording occur if you have selected record for that channel. Which you choose
will depend on various factors.
Vehicle Installation
You can mount your scanner in your vehicle, using either the supplied bracket or the optional DIN-E sleeve.
Mounting Using the Bracket
With the bracket removed from the radio, use the holes in the bracket as a template to initially mark the location you plan to use in your vehicle. Be absolutely
certain of what might be behind the mounting surface before making any holes, be it above, or below, or in front of your dash, armrest console, or other location.
If you drill carelessly, expensive damage can result. If in doubt, consult your vehicle dealer’s service department or a qualified professional installer.
Important: AVOID AIRBAG DEPLOYMENT ZONES. Ignoring this installation concern may result in bodily harm and the inability of the airbag to perform
properly.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (3 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html
1.
2.
3.
4.
Using appropriate screws or other hardware, secure the bracket.
Insert the scanner and insert the bracket knobs to lock the scanner in position.
Attach the Cigarette Lighter Power Cord to the rear of the scanner and plug the adapter end into a dash mounted 12V DC socket.
Attach a suitable mounted mobile antenna to the antenna jack on the back of the scanner.
Mounting Using the DIN-E Sleeve (Option for BCT15X)
If you are unsure about how to install your scanner in your vehicle using the optional DIN-E sleeve, consult your automobile manufacturer, dealer, or a qualified
installer. Before installing, confirm that your scanner fits in the desired mounting area and you have all the necessary materials to complete the task. Your scanner
requires a 2 x 7-1/8 x 5-5/16 inch (50 x 180 x 135 mm) mounting area. Allow an additional 2-3/8 inch (60mm) space behind the unit for connectors and wires.
To purchase the DIN-E sleeve and included Removal Keys, visit http://www.unidendirect.com/ and order part number, DIN-0001.
1. Remove the bracket if it is attached.
2. Remove the four Philips screws from four small tabs on the rear of the case that secure the outer metal case and pull off the case (toward the rear) with
care.
3. Install the DIN sleeve into the opening in your dashboard, lip facing out.
4. Push out the top and bottom tabs to hold the sleeve firmly in place.
5. Before inserting the scanner in the sleeve, attach the cable from the previously mounted antenna. Attach the DC Power leads. RED goes to a positive (+)
connection on your fuse block while BLACK connects to the vehicle’s chassis ground (-).
6. Connect the ORANGE lead to one side of the headlamp switch so that when you activate the headlights, the scanner’s LCD display changes intensity. Be
sure all the connections are routed away from any potentially pinching or slicing sheet metal.
7. Slowly slide the scanner into the sleeve until it locks in place.
8. To remove the unit, fully insert the removal keys into each slot on the left and right edges of the front panel. Carefully slide the radio from the sleeve.
Note: If you plan to connect a GPS unit or external speaker at a later time, expect to remove the unit for ease of making those connections.
Removing the Scanner from the DIN-E Sleeve
If you plan to connect other devices or wires to the radio, such as a GPS unit, at a later time, you should plan to remove the scanner from the DIN-E sleeve. This
is easily done using the provided Removal Keys that come with the optional DIN-E sleeve.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (4 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html
Refer to the illustration that follows, showing the Removal Keys.
Fully insert both Removal Keys into the slots on the left and the right edges of the radio’s dress panel. You cannot remove the radio with only one key. Press in
fully,and do not twist the keys. The radio will unlock from the sleeve making withdrawal from the sleeve possible. Store the keys in a safe place for future use.
Mounting Using ISO Technique
Some vehicles can take advantage of another approach to mounting a radio in a vehicle, called the ISO technique. However, this technique requires a very
detailed and thorough knowledge of the technique. Therefore, we strongly suggest that if you have any doubt about your experience and abilities, please consult
with a professional installer who is familiar with the ISO approach to radio installation.
To begin the process, it is first necessary to remove the scanner’s outer metal sleeve from the inner chassis. Unthread the four screws in the rear of the unit. Slide
the cover toward the rear and off. Once the sleeve is removed, you will see threaded, metric machine screw holes on either side of the chassis cabinet. Uniden
does not supply these screws. Their diameter, length, and screw type should be chosen by a qualified installer based on the internal vehicle bracket which will be
used in securing the scanner chassis.
Once the original radio is removed from the vehicle dash and the fit of the scanner is correct, be sure to connect all the power, audio, antenna, and any other
cables or wires, to the scanner before the scanner is secured.
The following illustration is a typical example of the ISO technique and the general side mounting screw holes often encountered. It does not actually represent
the Uniden scanner nor your vehicle’s mounting bracket. Only a professional installer will be able to determine the best and correct approach.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (5 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileSettingUpTheHardware.html
Removing the Display Sticker
Before you use the scanner for the first time, remove the protective plastic film over the display.
Connecting an Optional Antenna
The scanner’s BNC connector makes it easy to connect a variety of optional antennas, including an external mobile antenna or outdoor base station antenna.
Note: Always use 50- or 75-ohm, RG-58, or RG-8, BNC terminated coaxial cable to connect an outdoor antenna. If the antenna is over 50 feet from the scanner,
use RG-8 low-loss dielectric coaxial cable. Cable loss increases with higher frequency.
Connecting an Earphone/Headphone
For private listening, you can plug a 1/8-inch (3.5 mm) mini-plug earphone or headphones (not supplied) into the headphone jack on the front of your scanner.
This automatically disconnects the internal speaker. See the Earphone Warning for important information about using an earphone/headphone.
WARNING!
Never connect anything other than the recommended amplified extension speaker to the scanner’s headphone jack. Damage to the scanner might
occur.
Connecting an Extension Speaker
In a noisy area, an optional amplified extension speaker, positioned in the right place, might provide more comfortable listening. Plug the speaker cable’s 1/8inch (3.5-mm) mini-plug into your scanner’s back-panel Ext. Sp. Jack.
WARNING!
Never connect any part of the headphone jack to the antenna jack or connect the radio to an installation where the antenna and audio connection are
grounded. This might also damage the scanner.
This page applies to the following scanner(s): BCD996XT BCT15X Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...s/temp/UnidenManBeta/MobileSettingUpTheHardware.html (6 of 6)4/7/2009 10:08:55 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.html
Connecting a GPS receiver
To determine whether the information on this page applies to your
scanner, see the tags at the bottom of the page.
●
●
●
●
Compatible GPS receivers
Configuring your scanner
Connecting the receiver
Troubleshooting
Compatible GPS receivers
You can connect your scanner to any GPS receiver that meets the following criteria:
●
●
●
Outputs NMEA-0183 v3.01-compliant location data
Outputs both the Global Positioning System Fix ( GGA ) and Recommended
Minimum Specific GNSS ( RMC ) data sentences
Provides a serial data (RS-232) connection
Configuring your scanner
1.
2.
3.
4.
Go to the Settings menu and select Set Serial Port .
Select _Set Baud Rate|.
Select Set Rear Port.
Select 4800 bps for the baud rate.
Connecting the receiver
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (1 of 3)4/7/2009 10:08:56 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.html
1. Plug your GPS receiver's RS232 cable directly into the DB9 connector on the
back of the scanner.
2. When the scanner recognizes the GPS input, it displays a confirmation message
and shows the GPS icon on the display.
3. If the GPS receiver does not have a lock on the satellites, the scanner displays
Searching for Satellite .
Troubleshooting
If you can't get the scanner to recognize the GPS receiver:
●
●
Check the receiver's baud rate. Most compatible GPS receivers use a baud rate of
4800 bps, but it's possible your receiver is using a non-standard baud rate. Set the
scanner's baud rate to match the GPS receiver's.
Check the receiver's output mode. Some receivers have proprietary signalling
modes that are not NMEA compliant, but you can usually set them to use a
NMEA compliant mode.
If the scanner recognizes the GPS receiver but doesn't lockout systems as you expected:
●
●
Make sure the GPS receiver has a lock on the satellites.
Check the location configuration for the sites and channel groups in the system.
1. For each site or channel group, go to the Set LocationInfo menu.
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (2 of 3)4/7/2009 10:08:56 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/MobileConnectingAGPSReceiver.html
2. Check the range, latitude, and longitude settings to make sure they are
correct.
3. Make sure the Set GPS Enable option is set to Yes .
This page applies to the following scanner(s): BCD996XT BCT15X Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Do...temp/UnidenManBeta/MobileConnectingAGPSReceiver.html (3 of 3)4/7/2009 10:08:56 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html
Number Tags
●
●
●
●
●
●
Number Tags let you quickly navigate to a specific system or channel.
You can assign Number Tags at the system level ( System Number Tag , or SNT),
at the channel level ( CHannel Number Tag , or CHNT), or at both levels.
You can assign an SNT to the temporary system Close Call Hits that is created
during Close Call searches. This system and its SNT operate like any other
system.
You can assign Number Tags to service searches and custom search ranges.
These search Number Tags operate like regular SNTs.
Programming Number Tags
❍ Assigning an SNT
❍ Assigning a CHNT
Using Number Tags
Programming Number Tags
Assigning an SNT
●
●
SNTs can range from 0 to 999 .
No two systems can have the same SNT. (This includes SNTs assigned to the
Close Call Hits system or any search ranges.)
To a system :
1.
2.
3.
4.
Open the Program System menu.
Select the system you want to assign the number tag to.
Select Edit Sys Option, then select Set Number Tag.
Enter the number tag you want to use for this system.
To the Close Call Hits system :
1. Open the Close Call menu.
2. Select Hits with Scan, then select Set Number Tag.
3. Enter the number tag you want to use for the Close Call Hits system.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (1 of 3)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html
To a service search range :
1. Open the Search for... menu.
2. Select Edit Service, then select the service search range you want to assign the
number tag to.
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this search range.
To a custom search range :
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you want to assign the
number tag to.
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this custom search range.
Assigning a CHNT
●
●
●
1.
2.
3.
4.
5.
6.
You can assign CHNTs to channels even if the system does not have an assigned
SNT. However, without an SNT, you can only navigate to these channels from
within that system itself.
CHNTs must be unique within their own system, but you can re-use CHNTs in
other systems.
CHNTs can range from 0 to 999 .
Open the Program System menu.
Select the system containing the channel you want to assign the number tag to.
Select Edit Group, then select the channel group you want.
Select Edit Channel, then select the channel you want to assign the number tag to.
Select Set Number Tag.
Enter the number tag you want to use for this channel.
Using Number Tags
To navigate
directly to:
Key Sequence
Example
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (2 of 3)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html
A system or search
range
1. Tap HOLD.
2. Enter the SNT + •.
3. Tap MENU.
If the SNT is 4 , enter
HOLD / 4 / • /
MENU.
A channel in the
current system
1. Tap HOLD.
2. Enter the CHNT.
3. Tap MENU.
If the CHNT is 27,
enter HOLD / 27 /
MENU.
A channel in a
different system
1. Tap HOLD.
2. Enter the SNT followed by the
decimal point.
3. Enter the CHNT.
4. Tap MENU.
If the SNT is 4 and
the CHNT is 27,
enter HOLD / 4 / • /
27 / MENU.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/NumberTags.html (3 of 3)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
Quick Keys
●
●
●
●
●
●
Quick Keys let you enable or disable systems and channel groups during a scan.
Disabled systems and channel groups are ignored during scans.
You can assign Quick Keys at the system/site level ( System/site Quick Key , or
SQK ), at the channel group level ( Group Quick Key , or GQK ), or at both levels.
You can assign an SQK to the temporary system Close Call Hits that is created
during Close Call searches. This system and its SQK operate like any other
system.
You can assign Quick Keys to service searches and custom search ranges. These
search Quick Keys operate like regular SQKs.
Programming Quick Keys
❍ Assigning an SQK
❍ Assigning a GQK
Using Quick Keys
❍ To use SQK 0 through 9
❍ To use SQK 10 through 99
❍ To use a GQK
Programming Quick Keys
Assigning an SQK
●
●
●
Multiple systems, sites, and search ranges can share the same SQK.
All systems and sites assigned to the same SQK will be enabled (or disabled)
when you enter the Quick Key.
SQKs range from 0 to 99 .
To a conventional system:
1.
2.
3.
4.
Open the Program System menu.
Select the system you want to assign the Quick Key to.
Select Edit Sys Option, then select Set Quick Key.
Enter the Quick Key you want to use for this system.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (1 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
To a trunked system:
1.
2.
3.
4.
Open the Program System menu.
Select the system you want to assign the Quick Key to.
Select Edit Site, then select the site you want.
Select Set Quick Key, then enter the Quick Key you want to use for this site.
To the Close Call Hits system :
1. Open the Close Call menu.
2. Select Hits with Scan, then select Set Quick Key? .
3. Enter the Quick Key you want to use for the Close Call Hits system.
To a service search range :
1. Open the Search for... menu.
2. Select Edit Service, then select the service search range you want to assign the
Quick Key to.
3. Select Search with Scan, then select Set Quick Key.
4. Enter the Quick Key you want to use for this search range.
To a custom search range :
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you want to assign the
Quick Key to.
3. Select Search with Scan, then select Set Quick Key.
4. Enter the Quick Key you want to use for this custom search range.
Assigning a GQK
●
●
●
All channels in the channel group will be enabled (or disabled) when you enter
the GQK.
Multiple channel groups in the same system can share the same GQK. However,
all of these channel groups will be enabled (or disabled) when you enter the GQK
from within that system.
You can assign GQKs to channel groups even if their system does not have an
assigned SQK.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (2 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
●
●
You can only use GQKs within the current system: the GQK will not affect a
channel group in another system.
GQKs range from 0 to 9 .
1. Open the Program System menu.
2. Select the system containing the channel group you want to assign the Quick Key
to.
3. Select Edit Group, then select the channel group you want.
4. Select Set Quick Key, then enter the Quick Key you want to use for this channel
group.
Using Quick Keys
●
●
Quick Keys only work in Scan mode.
Entering the Quick Key toggles the enabled/disabled state of the system/site/
search range or channel group (i.e., if the system is currently enabled, entering the
Quick Key will disable it, and vice-versa).
To use SQK 0 through 9
●
●
●
Enter Scan mode.
Tap the number key that matches the SQK. (For example, if the SQK is 4, just
enter 4.)
Any systems, sites, or search ranges assigned to this SQK become disabled. (If
they were already disabled, they become enabled.)
To use SQK 10 through 99
●
●
●
Enter Scan mode.
Tap the decimal point ( ./NO ), then enter the SQK. (For example, if the SQK is
32 , enter ./NO / 32.)
Any systems, sites, or search ranges assigned to this SQK become disabled. (If
they were already disabled, they become enabled.)
To use a GQK
●
●
Enter Scan mode.
Go to the system that contains the channel group you want to enable or disable.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (3 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html
●
●
Tap FUNCTION , then tap the number key that matches the GQK. (For example,
if the GQK is 7 , enter FUNCTION / 7.)
Any channel groups assigned to this SQK within the current system only become
disabled. (If they were already disabled, they become enabled.)
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/QuickKeys.html (4 of 4)4/7/2009 10:08:57 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SearchKeys.html
Search Keys
The scanner has three Search Keys that you can assign to a special search range; the
Search Keys are set to number keys 1 , 2 , and 3 :
Search Key 1
Search Key 2
Search Key 3
Programming Search Keys
1. Open the Search for... menu.
2. Select Set Search Key, then select the search key you want to program.
3. Select the search range you want to assign to this Search Key. Choose one of the
pre-programmed service search ranges, one of the 10 custom search ranges, a
Tone-Out search, or a Band Scope search.
If the Search Key you selected starts a Tone-Out search, the scanner switches to ToneOut mode and searches the most-recently-used Tone-Out channel (out of the 10
available). If you want to search a different Tone-Out channel, use the SELECTVOLUME-SQUELCH knob to select the Tone-Out channel you want to use.
Using Search Keys
To start the search assigned to a Search Key, FUNCTION + tap that Search Key. For
example, to start the search assigned to Search Key 2, FUNCTION + tap 2 .
(You can't use the Search Keys when the scanner is in Scan mode or GPS mode.)
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SearchKeys.html4/7/2009 10:08:58 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html
Programming locations
To use Location-based Scanning with a particular system, you will need to program your scanner
with the geographic coordinates you want to use for each site or channel group. You can also
program your scanner to alert you when you approach particular locations.
●
●
●
Programming a location for a site
Programming a location for a channel group
Programming general locations
❍ To create a new location
❍ For Dangerous Xing and Dangerous Roads only
❍ Edit an existing location
Programming a location for a site
Each system site can have separate location information.
1.
2.
3.
4.
5.
6.
Open the Program System menu.
Select the system you want to program for location based scanning.
Select Edit Site, then select the first site you want to assign a location to.
Select the Set LocationInfo menu and enter the latitude, longitude, and range for this site.
Change the Set GPS Enable field to On .
Go back to the Edit Site menu and repeat these steps with any other sites you want to
program for this system.
Programming a location for a channel group
Each channel group in a system can have separate location information.
1.
2.
3.
4.
5.
6.
Open the Program System menu.
Select the system you want to program for location based scanning.
Select Edit Group, then select the first channel group you want to assign a location to.
Select the Set LocationInfo menu and enter the latitude, longitude, and range for this site.
Change the Set GPS Enable field to On .
Go back to the Edit Group menu and repeat these steps with any other sites you want to
program for this system.
Remember: You have to turn on Set GPS Enable before the location information
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (1 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html
can effect that site or channel group.
Programming general locations
You can program general locations (i.e., locations that are not associated with a site or channel
group). There are three types of general locations:
●
●
●
points of interest ( POI )
intersections ( Dangerous Xing )
roads ( Dangerous Road )
You can program the scanner to alert you when you come within a designated distance of that
location.
To create a new location
1.
2.
3.
4.
5.
6.
7.
8.
Open the Program Location menu.
Select the type of location you want to create.
Select New Location to create a new location of this type.
*If you want to create a different type of location, go back to the Program Location menu
and select that location type.
If you want to change the default location name, select Edit Name? and enter a new name.
Select Set LocationInfo? and enter the latitude and longitude for this location.
Select Set Range and enter the distance from this location you want the scanner to alert
you.
Choose the Alert Tone and Alert Light you want the scanner to use when you come within
range of this location.
For Dangerous Xing and Dangerous Roads only
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (2 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html
In addition to range, you can specify a heading and a speed limit for these types of locations:
●
●
If you set a speed limit, the scanner will only trigger an alert when you are within the
location's range and your current speed is over the programmed speed limit.
If you set a heading, the scanner will only trigger an alert when you are within the
location's range and your current heading is +/- 45 degrees from the programmed
heading. (For example, if you set the heading as North , the scanner will trigger an alert if
your current heading is North-east but not if your current heading is due East .)
Edit an existing location
1. Open the Program Location menu.
2. Select the type of location you want to edit; the scanner lists the existing locations of that
type in alphabetical order.
3. Select the location you want to edit, then change any of the location settings you want.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT BC346XT
Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ProgrammingLocations.html (3 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html
Setting alerts
Your scanner can trigger alerts for several different events. The table below shows the
different alerts and how to program them:
To sound an alert when
A channel becomes active
Follow these steps
Edit the channel properties (Edit
Channel#Set Alert):
1. Go to the Program System menu
and select the system that contains
the channel you want set the alert
for.
2. Select Edit Group , then select the
group you want.
3. Select Edit Channel, then select the
channel you want to set the alert
for.
4. Select Set Alert .
5. Choose the Alert Tone and Alert
Light you want the scanner to use.
An active Talk Group on a system contains Edit the system properties (Edit Sys
an emergency flag
Option#Emergency Alert):
1. Go to the Program System menu
and select the system you want set
the alert for.
2. Select Edit Sys Option, then select
Emergency Alert .
3. Choose the Alert Tone and Alert
Light you want the scanner to use.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html (1 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html
The scanner detects a Close Call hit
Edit the Close Call properties:
1. Go to the Close Call menu.
2. Select Set CC Alert .
3. Choose the Alert Tone and Alert
Light you want the scanner to use.
4. For Close Call Alerts, you can also
have the scanner pause before it
resumes searching. Select Set CC
Pause to activate this feature.
The scanner gets a hit on a Tone-Out
channel
Edit the Tone-Out channel properties:
1. Go to the Tone-Out for... menu.
2. Select Tone-Out Setup , then select
the Tone-Out channel you want to
set the alert for.
3. Select Set Alert .
4. Choose the Alert Tone and Alert
Light you want the scanner to use.
You approach a particular location
●
●
●
Point of Interest( POI )
Dangerous Road
Dangerous Intersection ( Dangerous
Xing )
Edit the location properties:
1. Go to the Program Location menu
and select the type of location you
want set the alert for.
2. Select the particular location.
3. For a POI, select Set Alert , then
choose the Alert Tone and the
Alert Light you want to use.
4. For a Dangerous Road or Xing, the
alert tone is preset. Select the Alert
Volume and the Alert Light you
want to use.
NOTE: The scanner also triggers alerts for Weather Alerts (WX Operation#Weather
Alerts), but you can't edit the alert tone and light.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html (2 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html
This page applies to the following scanner(s): BCD996XT BCT15X BC346XT
BCD396XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/SettingAlerts.html (3 of 3)4/7/2009 10:08:59 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UsingQuickKeysStartupKeysAndSearchKeys.html
Using Quick Keys, Startup Keys, and
Search Keys
The different shortcut keys have different functions:
Quick Keys
●
●
●
●
Quick keys let you enable and disable systems and channel groups (disabled
systems and channel groups are ignored during scans).
You must be in Scan mode to use Quick Keys.
System Quick Keys (SQKs) let you enable or disable systems, sites or search
ranges: just enter the SQK from the number pad.
Group Quick Keys (GQKs) let you enable or disable channel groups inside the
current system: Tap FUNCTION , then enter the GQK from the number pad.
Startup Keys
●
●
●
Startup Keys let you lock and unlock several systems, sites, and search ranges all
at the same time.
When you activate a Startup Key, the scanner unlocks all systems, sites, and
search ranges that are assigned to that same Startup Key; the scanner also locks
all systems, sites, and search ranges that are assigned to a different Startup Key.
To activate a Startup Key, press & hold the number key while you power the
scanner on.
Search Keys
●
●
Search Keys let you quickly start one of 3 programmed searches.
To start the search assigned to a Search Key, FUNCTION + tap that Search Key.
This page applies to the following scanner(s): BCD996XT BCT15X BCD396XT
BC346XT Users Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Docum...idenManBeta/UsingQuickKeysStartupKeysAndSearchKeys.html4/7/2009 10:09:00 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html
Tone Out mode
To determine whether the information on this page applies to your scanner,
see the tags at the bottom of the page.
With the tone out feature, the scanner monitors up to 10 different channels for paging tones
(two-tone sequential, single tone, and group tone). Normally, the scanner monitors each of
the 10 channels in turn. However, if any tone-out channels share the same frequency,
modulator, and attenuator settings, the scanner checks these channels simultaneously.
Configuring Tone Out channels
To configure Tone-Out channels:
1. Go to the Tone-Out for... menu.
2. Select Tone-Out Setup .
3. Select the Tone-Out channel ( Tone-Out 1 through Tone-Out 10 ) you want to
configure.
4. Select Set Frequencies and choose the frequencies for this channel
5. Select Set Tone and program Tone A and Tone B.
6. Set any of the other properties as you prefer (they aren't required).
Required
Frequencies ( Set Frequencies)
Tone A and Tone B ( Set Tones)
Recommended Name ( Edit Name)
Optional
Automatic Gain Control ( Set Audio AGC)
Delay Time ( Set Delay Time)
Alert ( Set Alert)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (1 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html
*digital scanners only
Using Tone-Out Mode
To start a Tone-Out search:
1. Tap MENU .
2. Scroll down and select Tone-Out for...
3. Select Tone-Out Standby to start the search.
●
●
●
The scanner starts searching the most recently-used Tone-Out channel (and any
other Tone-Out Channels that have the same frequency).
If you want to search a different channel, just turn the SELECT-VOLUMESCROLL knob until you find the channel you want.
To exit Tone-Out mode, tap SCAN .
Key operation in Tone Out Mode
●
●
Turn the SELECT-VOLUME-SCROLL knob to change the channel.
FUNCTION + tap MENU to go to the Tone-Out for... menu.
Key Name
(2nd
operation)
Action On
Tap
FUNCTION
+ Tap
HOLD (Close
Call)
1 (Search 1)
2 (Search 2)
3 (Search 3)
Enter Hold mode
(the scanner
opens squelch).
Enter the number on the key.
Toggle Close
Call modes.
Start the search range assigned to this Search Key.
FUNCTION Enter Close Call
+ Press &
Only mode.
hold
NA
NA
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (2 of 4)4/7/2009 10:09:01 AM
NA
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html
Key Name
(2nd
operation)
Action on:
Tap
Scan (Search)
Enter Scan
mode.
FUNCTION
+ Tap
Display the
Quick Search
screen (enter
Search mode).
4 (IF exchange)
5 (Volume
offset)
6 (Display mode)
Enter the number on the key
Switch to the
intermediate
frequency (IF).
NA
NA
Key Name
(2nd
operation)
Action on:
Lockout
9 (Modulation)
7 (Attenuation) 8 (Reverse freq.)
Tap
NA
Enter the number on the key.
FUNCTION
+ Tap
NA
Toggle the
attenuator state
for this channel.
NA
Change the
modulation.
FUNCTION
+ Press &
hold
NA
Toggle the
attenuator state
for all signals.
NA
NA
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (3 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html
Key Name
(2nd
operation)
Action on:
Tap
Backlight
(Power, Lock)
No (Decimal,
Priority)
0 (Weather)
Turn on the LCD During a system Enter the number
backlight.
message: Cancel
on the key.
the message and
exit that screen.
Yes (Enter,
GPS)
Edit the current
Tone-Out
channel.
Press & hold Turn the scanner
on or off.
NA
NA
NA
FUNCTION
+ Tap
Lock or unlock
the keypad.
NA
Change the WX
Alert Priority
settings.
Enter GPS mode.
FUNCTION
+ Press &
hold
NA
NA
Enter Weather
mode.
NA
This page applies to the following scanner(s): BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/ToneOutMode.html (4 of 4)4/7/2009 10:09:01 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html
Close Call mode
To determine whether the information on this page applies to your scanner,
see the tags at the bottom of the page.
When the scanner is in Close Call mode, it performs a close call check every 2 seconds.
The scanner switches to the selected bands and searches for unusually strong signals
(indicating the transmitter is probably somewhere close by). After the close call check, the
scanner returns to its previous function.
In Close Call Do Not Disturb mode, the scanner does not perform a Close Call check if it
is already receiving an audio transmission. This prevents the audio from cutting out every 2
seconds.
In Close Call Only mode, the scanner only performs Close Call checks.
The Close Call menu lets you change the operation settings of the Close Call feature. You
can change the overall Close Call options through the Srch/CloCall Opt menu.
Key operation in Close Call Only mode
●
●
Turn the SELECT-VOLUME-SCROLL knob to resume searching.
FUNCTION + tap MENU to go to the Close Call menu.
Key Name
(2nd
operation)
Action on:
Tap
Hold (Close
Call)
When the
scanner detects a
Close Call hit:
Enter Hold
mode.
1 (Search 1)
2 (Search 2)
3 (Search 3)
Disable the Close Call band associated with this key.
Tap again to enable.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (1 of 3)4/7/2009 10:09:03 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html
FUNCTION
+ Tap
Toggle Close
Call mode.
Start the search assigned to this Search Key.
Key Name
(2nd
operation)
Action on:
Scan (Search)
Tap
Enter Scan
mode.
FUNCTION
+ Tap
Display the
Quick Search
screen (enter
Search mode).
4 (IF exchange)
5 (Volume
offset)
6 (Display
mode)
Disable the Close Call band associated with this key.
Tap again to enable.
Switch to the
intermediate
frequency (IF).
NA
NA
7 (Attenuation)
8 (Reverse
freq.)
Disable the
Close Call band
associated with
this key. Tap
again to enable.
NA
NA
Double tap Permanently lock
out the current
Close Call
frequency.
NA
NA
NA
Press & hold Unlock all Close
Call and Search
frequencies.
NA
NA
NA
Toggle the
attenuator state
for this channel.
NA
Change the
modulation.
Key Name
(2nd
operation)
Action on:
Tap
FUNCTION
+ Tap
Lockout
Temporarily lock
out the current
Close Call
frequency (until
you turn the
scanner off).
Review the list
of locked out
IDs.
9 (Modulation)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (2 of 3)4/7/2009 10:09:03 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html
FUNCTION
+ Press &
hold
NA
Toggle the
attenuator state
for all signals.
Show the reverse
frequency for the
current
frequency. (The
scanner returns
to the current
frequency when
you release the
key.)
NA
No (Decimal,
Priority)
0 (Weather)
Yes (Enter,
GPS)
NA
When
monitoring a
Close Call
frequency: store
the current
frequency.
Key Name
(2nd
operation)
Action on:
Tap
Backlight
(Power, Lock)
Turn on the LCD During a system
backlight.
message: Cancel
the message and
exit that screen.
Press & hold Turn the scanner
on or off.
NA
NA
NA
FUNCTION
+ Tap
Lock or unlock
the keypad.
NA
Change the WX
Alert Priority
settings.
Enter GPS mode.
FUNCTION
+ Press &
hold
NA
NA
Enter Weather
mode.
NA
This page applies to the following scanner(s): BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/CloseCallMode.html (3 of 3)4/7/2009 10:09:03 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html
Band Scope mode
Band Scope mode is a special type of Search mode where the scanner displays the strength
of any signal it finds.
●
●
In a band scope search, the scanner starts at the lowest frequency in the range and
moves up the search range.
In Max Hold Search mode, the scanner displays the strongest signal that it found.
To turn on Band Scope mode:
Band Scope mode is the default setting for Search Key 3. To turn on Band Scope mode,
enter Search mode, then tap FUNCTION + 3 (SR3) . (To change the Search Key
assignment, see Search Keys#Programming Search Keys.)
Reading the display in Band Scope mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (1 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html
Key operation in Band Scope mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (2 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html
Key Name
(2nd
operation)
Action on:
Hold (Close
call)
1 (Search 1)
2 (Search 2)
3 (Search 3)
Tap
Enter Hold
mode.
NA
NA
NA
FUNCTION
+ Tap
Toggle Close
Call modes.
NA
NA
NA
NA
NA
NA
4 (IF exchange)
5 (Volume
offset)
6 (Display
mode)
NA
NA
NA
NA
NA
NA
7 (Attenuation)
8 (Reverse
freq.)
Toggle the
attenuator state
for the current
signal.
NA
FUNCTION Enter Close Call
+ Press &
Only mode.
hold
Key Name
(2nd
operation)
Action on:
Tap
Scan (Search)
Enter Scan
mode.
FUNCTION Change the band
+ Tap
scope search
type.
Key Name
(2nd
operation)
Action on:
FUNCTION
+ Tap
Lockout
NA
9 (Modulation)
Change the
modulation.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (3 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html
FUNCTION Unlock all items
+ Press &
regardless of
hold
type.
Toggle the
attenuator state
for all signals.
NA
NA
No (Decimal,
Priority)
0 (Weather)
Yes (Enter,
GPS)
NA
NA
NA
NA
Key Name
(2nd
operation)
Action on:
Tap
Backlight
(Power, Lock)
Turn on the LCD During a system
backlight.
message: Cancel
the message and
exit that screen.
Press & hold Turn the scanner
on or off.
NA
FUNCTION
+ Tap
Lock or unlock
the keypad.
NA
Change the
Enter GPS mode.
Weather Alert
Priority settings.
FUNCTION
+ Press &
hold
NA
NA
Enter Weather
mode.
NA
This page applies to the following scanner(s): BCD396XT BC346XT
UsersGuide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/BandScopeMode.html (4 of 4)4/7/2009 10:09:04 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html
GPS mode
To determine whether the information on this page applies to your scanner, see the tags at the bottom of the
page.
You must have a compatible GPS receiver connected!
●
●
●
See Also
Reading the display in GPS mode
❍ Main GPS display
❍ Location alert display
❍ Location review display
Key operation in GPS mode
See Also
GPS mode is only one small part of location-based scanning. For more information on using your scanner with a GPS
receiver, see the following links:
Location-based Scanning contains
●
●
●
an overview of why you might want to use a GPS receiver with your scanner
an explanation of two different approaches to location-based scanning
some information on fining antenna locations
Programming locations contains
●
●
●
details on how to program locations for systems, sites, and channels
details on how to program Points of Interest ( POI ), Dangerous Roads, and Dangerous Intersections ( Dangerous
Xing )
information on reviewing and editing locations
Connecting a GPS receiver contains
●
●
●
details on which GPS receivers are compatible
instructions on connecting a GPS receiver
troubleshooting tips if you can't the receiver working with the scanner
Reading the display in GPS mode
There are several displays available in GPS mode.
Main GPS display
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (1 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html
Location alert display
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (2 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html
Location review display
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (3 of 5)4/7/2009 10:09:06 AM
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html
Key operation in GPS mode
Key Name (2nd
operation)
Action on:
Hold (Close call)
Tap
3 (Search 3)
1 (Search 1)
2 (Search 2)
NA
NA
NA
4 (IF exchange)
5 (Volume
offset)
6 (Display mode)
NA
NA
NA
NA
NA
Cycle through the
available displays.
7 (Attenuation)
8 (Reverse freq.)
Temporarily lockout the
current Location Alert.
When reviewing
locations:
Toggle the Lockout status
of the current location.
NA
NA
NA
Permanently lockout the
current Location Alert.
NA
NA
NA
Toggle Hold mode on the
scan or search running in
the background.
When reviewing
locations:
Enter Scan Hold mode.
Key Name (2nd
operation)
Action on:
Scan (Search)
Tap
FUNCTION +
Tap
Return to previous
operation.
When reviewing
locations:
Enter Scan mode.
NA
Key Name (2nd
operation)
Action on:
Lockout
Tap
Double Tap
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (4 of 5)4/7/2009 10:09:06 AM
9 (Modulation)
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html
Press & hold
FUNCTION +
Press & hold
When reviewing
locations:
Unlock all locations of
the current type (POI,
Dangerous Road or
Crossing).
NA
NA
NA
When reviewing
locations:
Unlock all locations
regardless of type.
NA
NA
NA
No (Decimal, Priority)
0 (Weather)
Yes (Enter, GPS)
During a system
message: Cancel the
message and exit that
screen.
When reviewing
locations:
Close the location review
list.
NA
Open the location review
location list.
When reviewing
locations:
Edit the selected location.
Turn the scanner on or
off.
NA
NA
NA
Lock or unlock the
keypad.
NA
NA
NA
NA
NA
Key Name (2nd
operation)
Action on:
Backlight (Power, Lock)
Tap
Press & hold
FUNCTION +
Tap
FUNCTION +
Press & hold
Turn on the LCD
backlight.
NA
This page applies to the following scanner(s): BCD396XT BC346XT Users
Guide
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/GPSMode.html (5 of 5)4/7/2009 10:09:06 AM
When reviewing
locations:
Replace the select
location's coordinates
with the coordinates of
your current position.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2009:04:07 10:08:10-05:00
Modify Date                     : 2009:04:08 23:18:52-05:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2009:04:08 23:18:52-05:00
Format                          : application/pdf
Title                           : file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/UnidenScannersUsersGuides.html
Document ID                     : uuid:f27953b5-8b5e-442f-8998-e90a48040df4
Instance ID                     : uuid:4ba6aa90-bf5b-4f7c-a3ec-1906b5d68a24
Producer                        : Acrobat Web Capture 7.0
Page Mode                       : UseOutlines
Page Count                      : 130
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AMWUB360

Navigation menu