Uniden America UH045 Portable Cellular Telephone User Manual Mini200 with cover vp CorelVentura 7 0

Download:
Mirror Download [FCC.gov]
Document ID	2902
Application ID	xFatGuOkPEEEXq0rv9mUKA==
Document Description	Pages 3 thru 33 of Owners Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	377.46kB (4718276 bits)
Date Submitted	1998-06-12 00:00:00
Date Available	1998-08-24 00:00:00
Creation Date	1998-05-21 16:45:58
Producing Software	Acrobat Distiller 3.01 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	Mini200 with cover.vp:CorelVentura 7.0
Document Creator	CorelDRAW 7

Color profile: Disabled
Composite Default screen
INTRODUCTION
Introduction
TO YOUR NEW MINICEL PHONE
INTRODUCTION
Congratulations on your purchase of the Uniden MiniCel
cellular phone. You have chosen to enter the world of
cellular telephone technology with one of the finest portable
cellular phones available today. Now you can place or
receive calls from anywhere there is cellular coverage.
Your MiniCel can go with you anywhere so that you’re
never out of touch – in your car, on the beach, at the
golf course or even just for a walk in the woods.
With the roam feature, you can use your phone when
you travel away from your own area. The many standard
features on the MiniCel make calling quick and
convenient. The easy-to-use menu functions help you
customize your MiniCel.
We’re confident you will be proud to own the MiniCel. To
make sure you understand all its convenient features,
please take the time to read this owner’s manual. It will
help you use the technology and convenience of cellular
communications.
AUTHORIZATION REQUIREMENTS
You must contact your local cellular service company to
obtain authorization and a cellular telephone number
before using your MiniCel. Fees for cellular service vary
from company to company.
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
50 Memory Locations
128K Bytes Flash Memory
Any Key Answer
One-Touch Emergency Dial
Speed Redial and Super Speed Redial
Programmable 20-Character Greeting
Password Protection Auto PIN
Battery Alarm
Two-Line, 20 Character LCD Display
Scratch Pad Memory
Speaker and Ringer Volume Control
Keyguard
Call Timers
Tone or Vibrate Alert
C:...Mini200 with cover.vp
Thu May 21 16:41:07 1998
INTRODUCTION
WELCOME
Color profile: Disabled
Composite Default screen
INCLUDED IN YOUR PACKAGE
TIP
To get the most from your
phone, please read this
owner’s manual
thoroughly. Also, be sure
to complete and mail the
product registration form.
WARNING
If any of these items are
missing or damaged,
immediately contact
your place of purchase.
Mini 200
AC Adapter and Charger
Rechargeable Battery
(one of the following:)
580 mAH nickel metal (MC580N)
580 mAH Lithium-ion (MC580L)
• This Owner’s Manual
• Precautions and Important Safety Instructions
• Registration Card
C:...Mini200 with cover.vp
Thu May 21 16:41:09 1998
Color profile: Disabled
Composite Default screen
Setting UpUP
SETTING
Your Phone
INSTALLING THE BATTERY
Your MiniCel comes with either one of the following:
580 mAH nickel metal (MC580N) or
580 mAH Lithium-ion (MC580L).
1) Line up the notches and
metal contacts on the bottom
of the battery and the base
(the back of the MiniCel).
Make sure the label
side is facing
the phone.
THE BASICS OF YOUR NEW MINICEL
1) Plug the AC adapter cord into the
input jack on the side of the phone.
2) Plug the AC adapter into a standard
120 VAC wall outlet.
Use only the Uniden AC adapter
supplied with this phone.
DO NOT use an outlet controlled
by a wall switch.
UP
C:...Mini200 with cover.vp
Thu May 21 16:41:12 1998
CHARGING THE BATTERY
SETTING
SETTING UP
2) Gently press the battery top until it clicks into place.
If you turn the phone on while the battery is charging,
CHARGING will shows in the display.
3) Charge the battery for 3 hours.
If the power is on when the battery
is fully charged, the display reads:
HINT
Before using your phone, fully charge
the rechargeable battery pack.
We recommend that the battery pack
charges for 3 hours.
Color profile: Disabled
Composite Default screen
BATTERY LOW ALARM
When the battery is low, RECHARGE BATTERY shows in the
LCD display, the battery icon starts flashing, and the
battery low warning tone sounds.
ANTENNA
Before placing or receiving a call,
gently pull the antenna up until it
clicks into place.
CAUTION
Do not touch the
antenna while you are
using the phone.
Do not use the phone with a damaged
antenna. Use only the supplied or
WARNING approved antenna. Unauthorized
antennas, attachments or modifications
could damage the phone, degrade the quality of the call and
violate FCC regulations.
POWER
TIP
For the best reception,
extend the antenna
before using the phone.
▼ Power On
Press and hold the end on/off
key until you hear a tone and
see the opening greeting.
Then the standby display shows:
The MiniCel is now in
standby mode.
▼ Power Off
Press and hold the end on/off
key and the display goes blank.
C:...Mini200 with cover.vp
Thu May 21 16:41:15 1998
Color profile: Disabled
Composite Default screen
CALLING
Calling
RECEIVING A CALL
SPEED
DIAL
Press mem, the two-digit
memory location
number (01-50)
and send.
Or, press mem, the
one-digit number for 1
through 9, and send.
1) When someone calls your MiniCel,
the LCD backlight flashes,
the alert sounds (see page ) or
vibrates (see page ) and
INCOMING CALL appears.
2) If the "any key" feature (page ) is active, press any key
other than ▲ or ▼.
If you have disabled the "any key" feature, press send.
3) The backlight stops flashing
and the
icon appears in
the display.
SUPER
SPEED
DIAL
From the standby
display, press and hold
the one-digit number
(only for locations
4) When you finish your call, press end.
▼ Absent Call Counter
When you don't answer an
incoming call, the display shows
the number of unanswered call(s).
Press any key to erase the message.
WITH YOUR MINICEL
CALLING
1 through 8).
Caution: location 9 is for
emergency dialing only.
▼ Direct Dialing
1) Enter the phone number on
the keypad. To erase a digit,
press clear and reenter the
correct number. To erase all
the digits, press and hold clear.
2) Press send.
The
icon shows in the display
while a call is in progress. If the
"current call timer" feature is on,
the counter starts (see page ).
CALLING
C:...Mini200 with cover.vp
Thu May 21 16:41:19 1998
MAKING A CALL
Color profile: Disabled
Composite Default screen
▼ Redial From Last 10 Completed Calls
HINT
To return to the blank
screen, press end or clear.
1) With no digits in the display,
press send.
You will see the last number dialed.
2) Press ▲ or ▼ to scroll
through the list.
3) When you find the number that
you want to call, press send.
HINT
To store the number in
memory, press and hold
mem. See page 10.
▼ One-Touch Emergency Dialing
To call 911, make sure that there are no numbers in the
display, then press and hold 9 wxyz for one second.
NOTE: This overrides the keyguard.
▼ PIN Calling
To protect from unauthorized use of some cellular or
automated systems, you can use a personal identification
number (PIN). The PIN must be programmed; see page 26.
If you enter a service area that does not require a PIN, set
the PIN feature to off.
▼ Inserting a Pause
If you need a pause to separate groups of numbers
during dialing, press and hold
This pause counts as one digit. Entering another pause
increases the length of the pause between numbers.
ENDING A CALL
When you finish your call, press end.
WHILE CALLING
▼ Adjusting the Earpiece Volume
During a conversation, press either ▲ or ▼.
You can do this through the volume menu (page 14).
C:...Mini200 with cover.vp
Thu May 21 16:41:22 1998
Color profile: Disabled
Composite Default screen
▼ Using the Scratch Pad
Use the scratch pad to record a phone number during a
call. Then you can dial that number from the scratch pad
or enter it into a memory location.
1) During a call, enter the
number with the keypad.
2) When you are finished with
your call, press end.
3) To dial the number in the
scratch pad, press send.
▼ Mute
• If you want to mute the microphone so the caller
cannot hear, press menu and
• To turn the microphone back on, press menu and
again.
▼ Monitor
NOTE
Since the microphone
(on the front) is disabled
during monitor, the
caller can’t hear you.
During monitor, you hear the conversation from the
speaker on the back. The microphone is disabled. Use
this feature for calling a bank or similar automated
answering system.
• To enable the monitor feature, press
• To disable the monitor feature, press
(monitor).
(monitor).
▼ Transmitting DTMF Signal(s)
DTMF (dual tone multi-frequency) tones are transmitted
from your phone when you press a digit key during a call.
When you press send during a call, it generates a flash
signal (signaling tone).
C:...Mini200 with cover.vp
Thu May 21 16:41:25 1998
CALLING
▼ Flash Signal (Signaling Tone)
Color profile: Disabled
Composite Default screen
Memor y Programming
MEMORY
PROGR AMMING
STORING NUMBERS AND NAMES
The MiniCel has 50 memory locations (01 through 50).
You can also store a 10-digit description or name to
identify the phone number. There are three sources to
enter numbers into memory: the scratch pad, entered in
standby or the recall numbers list.
HINT
To exit memory mode,
press end or clear.
1) With the number in the display,
press and hold mem for one second.
To search for an empty location, press either ▲ or ▼.
At the empty location, press mem.
If all the locations are full, the MEMORY FULL message
appears and an error tone sounds.
MEMORY
PROGRAMMING FOR YOUR PHONE
2) Enter the location number where you want to store
the number. Example: location 01
10
C:...Mini200 with cover.vp
Thu May 21 16:41:28 1998
If the location is occupied,
you will be prompted:
Example: you want to replace the number in memory,
press ▲ for yes.
3) If you want, you can enter a
10-character name with the
keypad. Example: HOME
4) To store the name or to finish,
press mem. You will see:
After two seconds, the display
returns to standby.
CHECKING MEMORY STATUS
From the standby display,
press mem three times.
To return to the standby display,
press either mem, end or clear.
Color profile: Disabled
Composite Default screen
MEMORY
CALLING STORED NUMBERS
TIP
Press mem, the two-digit memory location number
(01-50) and send.
Or, press mem, the one-digit number for 1 through 9;
then press send.
▼ Super Speed Dial
You can super speed dial from memory locations
1 through 8. Caution: location 9 is for emergency only!
CAUTION
Within the super speed
dial feature, location 9
is reserved for
emergency calling. If
any service provider is
available (even one the
phone isn’t registered
with), you can use the
emergency call feature.
HINT
To exit memory mode,
press end or clear.
1) From the standby display,
press and hold the one-digit
number (only for locations
1 through 8) until it appears
in the display.
2) The display changes to:
The call is in process.
CLEARING A MEMORY LOCATION
1) To select the location,
press mem and the two-digit
location number (01 - 50).
Example: 01
2) To clear the number,
press and hold clear.
3) Press ▲ for yes (to delete).
The display returns to standby.
or
Press ▼ for no.
To return to standby,
press end.
11
C:...Mini200 with cover.vp
Thu May 21 16:41:32 1998
PROGRAMMING
Put the phone numbers
that you call the most in
the first nine memory
locations. Then use
speed dial to call them.
▼ Speed Dial
Color profile: Disabled
Composite Default screen
Menus - Customizing Your Phone
MENUS
CUSTOMIZING YOUR PHONE
MENUS
THE FUNCTION MENU MAP
12
C:...Mini200 with cover.vp
Thu May 21 16:41:33 1998
▼ Quick Menu Access
To quickly move through the menu levels, use the keypad.
Example: To quickly change the answer option from
any key to send only:
Press menu, 2 abc , 2 abc , 2 abc , and menu.
Color profile: Disabled
Composite Default screen
SOUND MENU
TIP
The alert tones come
from the speaker on the
back of the phone.
▼ Alert Volume and Tone Menu
You can change both the volume and tone of the alert.
To change the alert volume:
1) To go to the sound menu from
standby, press menu.
2) Press ▼.
HINT
4) Press menu again.
MENUS
To enter a menu,
with your phone on,
press menu.
You will see MENU SELECT.
To select another menu,
press the ▲ (up) or
▼ (down) key.
3) Press menu.
5) Press menu again.
6) Use the ▼ or ▲ keys to increase or decrease the volume.
7) Press menu again. You will see:
NOTE!
For a “road map”
through the menus,
refer to the Function
Menu Map on page 12.
In about two seconds, the display
returns to standby.
To change the alert tone:
1) Repeat steps 1 through 4 above.
2) Press the ▼ key.
3) Press menu to hear tone 1.
HINT
To exit menu mode,
press end or clear.
4) Use the ▼ or ▲ keys to listen to the other tones
(tone 2 through 5).
5) To select a tone, press menu.
In about two seconds, the display returns to standby.
13
C:...Mini200 with cover.vp
Thu May 21 16:41:39 1998
Color profile: Disabled
Composite Default screen
▼ Earpiece Volume Menu
You can adjust the volume from loud to soft.
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the sound menu from
standby, press menu.
2) Press ▼.
3) Press menu.
HINT
To exit menu mode,
press end or clear.
4) Press ▼.
5) Press menu.
6) Use the ▼ or ▲ keys to change the earpiece volume.
7) Press menu again. You will see:
In two seconds, the display
returns to standby.
14
C:...Mini200 with cover.vp
Thu May 21 16:41:42 1998
Color profile: Disabled
Composite Default screen
▼ Keypad Volume Menu
TIP
The keypad tones comes
from the speaker on the
back of the phone.
When you press the keys, a tone sounds. You can adjust
the volume from loud to no sound.
1) To go to the sound menu from
standby, press menu.
2) Press ▼.
3) Press menu.
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
4) Press ▼.
5) Press ▼ again.
MENUS
6) Press menu.
HINT
To exit menu mode,
press end or clear.
7) Use the ▼ or ▲ keys to increase or decrease the
keypad tone volume.
8) Press menu again.
In two seconds, the display
returns to standby.
15
C:...Mini200 with cover.vp
Thu May 21 16:41:45 1998
Color profile: Disabled
Composite Default screen
▼ Speaker Volume Menu
TIP
The alert tones comes
from the speaker on the
back of the phone.
You can adjust the volume from loud to no sound.
1) To go to the sound menu from
standby, press menu.
2) Press ▼.
3) Press menu.
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
4) Press ▼ three times to get
to the speaker menu.
5) Press menu.
HINT
To exit menu mode,
press end or clear.
16
C:...Mini200 with cover.vp
Thu May 21 16:41:47 1998
6) Use the ▼ or ▲ keys to increase or decrease the
speaker volume.
7) Press menu again. You will see:
In two seconds, the display
returns to standby.
Color profile: Disabled
Composite Default screen
▼ Minute Minder Menu
1) To go to the sound menu from
standby, press menu.
2) Press ▼.
3) Press menu.
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
4) Press ▼ four times to get to
the minute minder menu.
5) Press menu.
MENUS
6) Use the ▼ or ▲ keys to increase or decrease the
minute minder volume.
7) Press menu again. You will see:
HINT
To exit menu mode,
press end or clear.
In two seconds, the display
returns to standby.
17
C:...Mini200 with cover.vp
Thu May 21 16:41:50 1998
Color profile: Disabled
Composite Default screen
PHONE SETTINGS MENU
▼ Vibrate Menu
You can choose between “ring” or vibrate to alert you to
an incoming call.
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
3) Press menu.
4) Press menu again.
HINT
To exit menu mode,
press end or clear.
18
C:...Mini200 with cover.vp
Thu May 21 16:41:53 1998
5) Use the ▼ or ▲ keys to choose
between VIBRATE/NO RING or
RING/NO VIBRATE.
6) Press menu again. You will see:
In two seconds, the display
returns to standby.
Color profile: Disabled
Composite Default screen
▼ Answer Option Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
You can choose whether you want to answer a call by
pressing any key on the keypad (other than ▲ or ▼) or
by pressing send.
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
HINT
To exit menu mode,
press end or clear.
3) Press menu.
4) Press ▼.
5) Press menu.
MENUS
6) Use the ▼ or ▲ keys to choose between
ANY KEY or SEND ONLY.
7) Press menu again. You will see:
In two seconds, the display
returns to standby.
19
C:...Mini200 with cover.vp
Thu May 21 16:41:55 1998
Color profile: Disabled
Composite Default screen
▼ Light Menu
You can choose how long you want the backlight to light.
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
3) Press menu.
HINT
To exit menu mode,
press end or clear.
4) Press ▼ twice.
5) Press menu again.
6) Use the ▼ or ▲ keys to choose between
SHORT, NORMAL, LONG or OFF.
7) Press menu again. You will see:
In two seconds, the display
returns to standby.
20
C:...Mini200 with cover.vp
Thu May 21 16:41:58 1998
Color profile: Disabled
Composite Default screen
▼ Change Greeting Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
The first message that appears when your phone is
turned on is the greeting.
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
3) Press menu.
4) Press ▼ three times.
HINT
To exit menu mode,
press end or clear.
5) Press menu again.
MENUS
6) You can enter up to
20-characters with
the keypad.
For example: MINICEL
HINT
For changes, use
to move right and
to move left, then enter
the correct letter.
To enter a space, press and hold
moves to the next space.
until the cursor
7) To store the greeting,
press menu again.
After two seconds, the display
returns to standby.
21
C:...Mini200 with cover.vp
Thu May 21 16:42:02 1998
Color profile: Disabled
Composite Default screen
▼ Enable Keyguard Menu
You can protect your phone from accidental key stroke by
disabling the keypad until there is an incoming call.
QUICK
TIP
To enable/disable
keyguard in standby,
press and hold menu for
two seconds.
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
3) Press menu.
4) Press ▼ four times.
HINT
5) Press menu.
To exit menu mode,
press end or clear.
HINT
To enable keyguard from
standby display, press
and hold menu
for two seconds.
22
C:...Mini200 with cover.vp
Thu May 21 16:42:04 1998
6) The display switches from
KEYGUARD ENABLED to
HOLD MENU TO DISABLE.
To enable keyguard, press and hold
menu for two seconds.
7) The phone returns to standby mode.
To disable keyguard, press and hold menu for two seconds.
Color profile: Disabled
Composite Default screen
▼ Headset Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
For hands-free calling, you can add an optional headset.
The headset menu has two settings: alert repeat or
auto-answer.
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
3) Press menu.
TIP
5) Press menu again.
MENUS
When the headset is
attached and
auto-answer is enabled,
an incoming call is
automatically answered.
4) Press ▼ five times.
6) Use the ▼ or ▲ keys
to choose between AUTO ANSWER
or ALERT REPEAT.
Our example: ALERT REPEAT.
TIP
The three options for
auto answer are: on,
on with speaker
or off (standby).
The two options for
alert repeat are:
one alert or three alerts.
7) Press menu.
8) Use the ▼ or ▲ keys to select one alert or three alerts.
9) Press menu. In two seconds, the display returns to
standby display.
23
C:...Mini200 with cover.vp
Thu May 21 16:42:07 1998
Color profile: Disabled
Composite Default screen
▼ Contrast Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
You can choose how much contrast you want in the
backlight display. High increases the contrast (darker
pixels) and low decreases the contrast (lighter pixels).
1) To go to the phone settings
menu from standby,
press menu.
2) Press ▼ twice.
3) Press menu.
4) Press ▼ six times.
HINT
To exit menu mode,
press end or clear.
5) Press menu again.
6) Use the ▼ or ▲ keys to choose between low to high.
The display changes as you choose different contrasts.
7) Press menu again. You will see:
In two seconds, the display
returns to standby.
24
C:...Mini200 with cover.vp
Thu May 21 16:42:10 1998
Color profile: Disabled
Composite Default screen
SECURITY MENU
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
▼ Change Password Menu
1) To go to the security menu
from standby, press menu.
2) Press ▼ three times.
3) Press menu.
HINT
To exit the change
password menu,
press end.
4) Press menu again.
5) To change the four-digit password,
enter the current
four-digit password.
seconds. If not, the CHANGE PASSWORD prompt appears.
• If you enter the wrong password, the
INCORRECT PASSWORD message
appears followed by the PASSWORD
prompt. These messages will
repeat until you enter the correct
password or press end.
6) Enter a new four-digit password.
7) To confirm, reenter the
new password.
8) The display returns to standby.
25
C:...Mini200 with cover.vp
Thu May 21 16:42:15 1998
MENUS
• You must enter the correct password within ten
Color profile: Disabled
Composite Default screen
▼ PIN Calling Menu
To change the PIN:
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the security menu from
standby, press menu.
2) Press ▼ three times.
3) Press menu.
4) Press ▼.
HINT
5) Press menu.
To exit menu mode,
press end or clear.
6) Press menu.
7) Enter your password.
8) Enter the new PIN.
9) Press menu again.
In two seconds, the display returns to standby.
To Turn On or Off the PIN:
1) Follow steps 1 through 4 above.
2) Press ▼.
3) Press menu.
4) Use the ▼ or ▲ keys to choose between on or off.
5) Press menu again.
In two seconds, the display returns to standby.
26
C:...Mini200 with cover.vp
Thu May 21 16:42:18 1998
Color profile: Disabled
Composite Default screen
CALL TIMERS MENU
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
Call timers keeps count of the time (hours, minutes and
seconds) that you have used the phone. Reset when you
want. Can be for one call, totals calls on line 1 and/or
line 2.
▼ Current Call Menu
1) To go to the call timers menu from
standby, press menu.
2) Press ▼ four times.
HINT
To exit menu mode,
press end or clear.
3) Press menu.
4) Press menu again.
MENUS
5) Use the ▼ or ▲ keys to choose between ON or OFF.
6) Press menu again. You will see:
In two seconds, the display returns to standby.
27
C:...Mini200 with cover.vp
Thu May 21 16:42:21 1998
Color profile: Disabled
Composite Default screen
▼ Show Last Call Time Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the call timers menu from
standby, press menu.
2) Press ▼ four times.
3) Press menu.
4) Press ▼.
HINT
To exit menu mode,
press end or clear.
5) Press menu. The length of your last
call displays.
6) Press menu to return to standby.
28
C:...Mini200 with cover.vp
Thu May 21 16:42:23 1998
Color profile: Disabled
Composite Default screen
▼ All Calls Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the call timers menu from
standby, press menu.
2) Press ▼ four times.
3) Press menu.
HINT
4) Press ▼ twice.
To exit menu mode,
press end or clear.
5) Use the ▼ or ▲ keys to choose between SHOW TIME or RESET.
TIP
• If you choose SHOW TIME
MENUS
There are two
independent timers for
each phone line.
6) Press menu.
you will see:
In two seconds, the display
returns to standby.
• If you choose RESET, you will be prompted for your password.
When you enter the password, you will see RESET.
Press menu again.
In two seconds, the display returns to standby.
29
C:...Mini200 with cover.vp
Thu May 21 16:42:25 1998
Color profile: Disabled
Composite Default screen
SERVICE SETTINGS MENU
▼ Phone Line Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the service settings menu
from standby, press menu.
2) Press ▼ five times.
3) Press menu.
HINT
To exit menu mode,
press end or clear.
4) Press menu again.
5) Use the ▼ or ▲ keys to choose
between LINE 1 or LINE 2.
6) Press menu again. You will see:
TIP
Contact your service
provider to set up line 1
and line 2.
30
C:...Mini200 with cover.vp
Thu May 21 16:42:28 1998
In two seconds, the display
returns to standby.
Color profile: Disabled
Composite Default screen
▼ Network Menu
HINT
To move to a menu,
use either the ▲ (up)
or ▼ (down) key.
1) To go to the service settings menu
from standby, press menu.
2) Press ▼ five times.
3) Press menu.
4) Press ▼.
HINT
To exit menu mode,
press end or clear.
5) Press menu.
7) Press menu again.
8) Use the ▼ or ▲ keys to choose between An ONLY, B ONLY,
HOME ONLY, PREFERRED SYSTEM, A PREFER B or B PREFER A.
9) Press menu.
In two seconds, the display returns to standby.
31
C:...Mini200 with cover.vp
Thu May 21 16:42:32 1998
MENUS
6) Use the ▼ or ▲ keys to choose between SELECT or BLOCK.
Example: choose SELECT.
SPECIFICATIONS
O F YOUR PHONE
Color profile: Disabled
Composite Default screen
32
C:...Mini200 with cover.vp
Thu May 21 16:42:32 1998
SPECIFICATIONS
Specifications
Channels:
832
Frequency Range:
Transmit: 824.04 to 848.97 MHz
Receive: 869.04 to 893.97 MHz
Channel Spacing:
30 kHz
Duplex spacing:
45 MHz
Frequency Stability: +/- 2.5 ppm
Receiver Sensitivity:
-116 dBm at -4°F (-20°C)
to +122°F (50°C) 3.7V +/- 10%
-113 dBm at -22°F (-30°C)
to +140°F (60°C) 3.7V +/- 10%
ERP:
0.6 W - 6.3 mW (6 levels in 4dB steps)
Modulation: Data - FSK Voice - FM (with compander)
Display:
Illuminated Liquid Crystal
Power:
3.7 VDC +/- 10%
Battery Drain:
Standby: 53 mA (Typical), (approx. 11 hours)
TX: 600 mA (Typical), (approx. 1 hour)
Operating Temperature: -22°F (-30°C) to +140°F (60°C)
Battery Packs:
standard: 580 mAH Lithium-ion (MC580L)
optional:
580 mAH nickel metal hydride (MC580N)
850 mAH Lithium-ion (MC850L)
Size of Phone and Battery (with antenna stored):
5 1/2 inches (13.97 cm) H
x 1 1/3 inch (3.39 cm) W
x 1 inch (2.54 cm) D
Weight:
4.23 oz. (119.2 g)
Specifications, features, and availability of
optional accessories are all subject to change
without prior notice.
Optional Accessories
ACCESSORIES
Hands-free Headset Pack
MC2006
Rechargeable Battery
580 mAH nickel metal
hydride (MC580N)
Extended Life
Rechargeable Battery
850 mAH Lithium-ion
(MC850L)
Car Power Adapter
MC2004
Rechargeable Battery
580 mAH Lithium-ion
(MC580L)
Wrist Strap
MC2007
• Leather Case with Beltclip
MC2005
ACCESSORIES
ACCESSORIES
FOR YOUR PHONE
Color profile: Disabled
Composite Default screen
33
C:...Mini200 with cover.vp
Thu May 21 16:42:36 1998

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 31
Create Date                     : 1998:05:21 16:45:58
Producer                        : Acrobat Distiller 3.01 for Windows
Creator                         : CorelDRAW 7
Title                           : Mini200 with cover.vp:CorelVentura 7.0

EXIF Metadata provided by EXIF.tools