Uniden America UH052A Portable Emergency Cellular Telephone User Manual Draft Owners Manual for Basic Model

Uniden America Corporation Portable Emergency Cellular Telephone Draft Owners Manual for Basic Model

Contents

Draft Owners Manual for Basic Model

Mobile911• Connects you directly to a 911 operator• Works anywhere in the US and Canada where analog cellular phones work• Requires no contracts, monthly service, activation or roaming charges• Includes a loud 95 decibel panic siren• No recharging; batteries last up to one yearPACKAGE CONTENTSMobile9114 AAA AlkalineBelt ClipCONTROLSLEFT KEY: Volume adjustRIGHT KEY: Signal/battery test.Signal lights, Antenna, Call button, Microphone, Earpiece, Battery compartment, Siren, In-use light4 AAA Alkaline BatteriesTo TEST SIGNAL & BATTERYPress "signal" button for 1 secondTo Call a 911 OperatorFlip down cover, Press Call button until unit beeps and lights flash momentarily, Wait and watch signal lights: FLASHINGORANGE- Searching for cellular signal, SOLID RED- Call cannot be placed because no cellular signal is available, SOLIDGREEN- Now dialing a 911 Operator, Listen for OperatorOPTIONAL: Press once to increase volumeTo end the call, press the Signal button for one secondPANIC SIREN: Press both buttons until unit beepsStop siren: Press both buttons again for 3 secondsWhile siren is sounding, you can still dial Operator.Press and hold the red Call buttonThe siren will turn off automatically.IMPORTANT SAFETY INFORMATION• Most 911 Call Centers do not have the capability to identify the location of a cellular call, unless the caller verballyprovides that information. It is important to immediately identify your location to 911 operators when placing an emergencycall to 911. Before saying anything else to the 911 operator, give an address and/or any nearby landmarks to help speedassistance.• Do not hang up until instructed to do so by a 911 operator. If your 911 call somehow gets disconnected, Mobile911'syellow "in use" light will turn off. Mobile911 cannot receive calls, so a 911 operator will be unable to call you back. Simplypress and hold the Call button for two seconds to place another 911 call.• In the unlikely event that you press the Call button and you hear a recorded message, or a 911 operator does notanswer, simply press and hold the Signal button to "hang up". Press and hold the Call button again, and Mobile911 willattempt to redial a 911 operator through an alternate cellular carrier. Please feel free to contact customer service withquestions or concerns.Checking Batteries & Availability of ServicePress and hold the "signal" button until unit beeps.After several flashes and beeps, the lights will display:Green light - Cellular signal is availableRed light - Cellular signal is unavailableAll lights flash - batteries are weak and must be replacedThe lights will turn off automatically after 60 seconds.Troubleshooting Problems• Verify that the batteries are inserted correctly and are not weak.• After pushing the red Call button until it beeps, look at the lights labeled "signal". If the red signal light becomes solid,this indicates that no signal could be found and your call will not go through to a 911 operator.
INSTALLING BELT CLIPInsert the belt clip into the slots on each sideClip removes by releasing one sideBattery MaintenanceWhen batteries are low, the unit will beep and all lights flash after pressing and holding "signal" button. Check batteriesyearly even if the Mobile911 has not been used. Check batteries each time you place a 911 call. Use AAA alkalinebatteries only. Never put discarded batteries into a fire or physically damage them. Avoid mixing old and new batteries ormixing different brands.MaintenanceClean Mobile911 with a soft, dry cloth. If necessary, dampen the cloth with diluted detergent then dry with a clean cloth.Caution: Other cleaning chemicals may discolor the surface.IMPOR TANT MESSAGE PLEASE READMobile911 is not guaranteed to contact emergency services. Mobile911 is intended solely for use in the United Statesand Canada. 911 emergency services are not available in all areas. Analog cellular service is not available in all areas.Prior to your first use of Mobile911 you should call your local emergency communications office and verify that wireless911 service is available in your area. You should also remember that the availability of wireless 911 does not meanMobile911 will always work. If you are in an area with insufficient cellular service, the call cannot be placed. Further, evenif you contact emergency services, the emergency service provider may not properly respond. You must also rememberto keep fresh batteries in Mobile911. In the United States, current Federal Communications Commission (FCC)Regulations require cellular service providers to pass all 911 calls through to all 911 emergency centers that haverequested the calls regardless of whether the call originates from a cellular service provider’s paid subscriber. In Canada,cellular service providers currently pass all 911 calls through to 911 centers on a voluntary basis. Should FCC regulationschange or if the policy of the Canadian service providers changes, 911 access through Mobile911 may be modified oreliminated. Mobile911 should not be used in Nova Scotia according to Chapter 4 of the Nova Scotia Emergency "911" Actof 1992, which states that no person shall use an automatic dialer to dial the number "911".90-Day Limited WarrantyWHO IS COVERED? Only the original purchaser is covered. You must have the original sales invoice to obtain warrantyservice.WHAT IS COVERED? Mobile911 is warranted to be free from defects in materials and workmanship. Mobile911 IS NOTGUARANTEED TO CONTACT EMERGENCY SERVICES IN ALL INSTANCES.HOW DO I OBTAIN WARRANTY SERVICE? Contact SecureAlert, LLC at 1-888-809-1253. You will be given a returnauthorization code and the address to which the defective product may be sent. You must send the defective product andthe original sales invoice, postage paid, to SecureAlert, LLC. SecureAlert, LLC will repair or replace the defective productwith a new, renewed, or comparable product at no charge to you. SecureAlert, LLC has sole discretion in determiningwhether to repair or replace the product.WHAT IS THE WARRANTY PERIOD? The warranty begins on the date you purchased Mobile911 and lasts for ninety(90) days. When the warranty on the original product expires, the warranty on any replacement product also expires.WHAT IS EXCLUDED? Your warranty does not cover:• Product damaged by misuse, accident, unauthorized repair, or other causes not within the control of SecureAlert, LLC.• Reception problems caused by signal conditions or cable or antenna systems outside the unit. SECUREALERT, LLCMAKES NO OTHER WARRANTY EXCEPT AS SPECIFICALLY STATED ABOVE. ANY IMPLIED WARRANTIESINCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARELIMITED TO THE NINETY (90) DAY WARRANTY PERIOD.LIABILITY LIMITATIONSYOUR EXCULSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT AS STATED ABOVE. IN NO EVENT WILLSECUREALERT, LLC , BE LIABLE TO ANY PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OFANY NATURE ARISING FROM OR RELATING TO ANY USE OF Mobile911 INCLUDING DAMAGES FOR PERSONALINJURY OR DAMAGES TO PROPERTY, AND HOWEVER OCCASIONED. SECUREALERT, LLC'S LIABILITY WILL INNO EVENT EXCEED THE PRICE OF THE UNIT. ANY LAWSUIT OR OTHER ACTION AGAINST SECUREALERT, LLC,IN CONNECTION WITH THE UNIT MUST BE FILED WITHIN ONE YEAR FROM THE DATE OF THE EVENT THATCAUSED THE LOSS, DAMAGE OR LIABILITY.Some states do not allow for the exclusion of incidental or consequential damages, so the above exclusion may not applyto you. Depending on your state, you may have other rights or remedies.
SpecificationsModulations: Data/VoiceFrequency Ranged: TX 824.04 MHz to 848.97 MHz / RX: 896.04 MHz to 893.97 MHzChannel Spacing: 30 kHzDuplex Spacing: 45 MHzOperating Temps: -30 to +60 °CSize: 2 in. (W) x 1 7/32” (D) x 6 1/16” (H)50.5 mm (W) x 31 mm (D) x 154 mm (H)U.S. Patent Number 6,044,257

Navigation menu