Uniden America UH052A Portable Emergency Cellular Telephone User Manual Draft Owners Manual for Basic Model

Uniden America Corporation Portable Emergency Cellular Telephone Draft Owners Manual for Basic Model

Contents

Draft Owners Manual for Basic Model

Download: Uniden America UH052A Portable Emergency Cellular Telephone User Manual Draft Owners Manual for Basic Model
Mirror Download [FCC.gov]Uniden America UH052A Portable Emergency Cellular Telephone User Manual Draft Owners Manual for Basic Model
Document ID136645
Application IDiGvoEWaDifXYPH5YgtJZwQ==
Document DescriptionDraft Owners Manual for Basic Model
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatMicrosoft Word - pdf
Filesize2.38kB (29697 bits)
Date Submitted2001-02-16 00:00:00
Date Available2001-04-25 00:00:00
Creation Date2001-02-16 09:13:20
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2001-02-16 09:13:22
Document TitleDraft Owners Manual for Basic Model

Mobile911
•
•
•
•
•
Connects you directly to a 911 operator
Works anywhere in the US and Canada where analog cellular phones work
Requires no contracts, monthly service, activation or roaming charges
Includes a loud 95 decibel panic siren
No recharging; batteries last up to one year
PACKAGE CONTENTS
Mobile911
4 AAA Alkaline
Belt Clip
CONTROLS
LEFT KEY: Volume adjust
RIGHT KEY: Signal/battery test.
Signal lights, Antenna, Call button, Microphone, Earpiece, Battery compartment, Siren, In-use light
4 AAA Alkaline Batteries
To TEST SIGNAL & BATTERY
Press "signal" button for 1 second
To Call a 911 Operator
Flip down cover, Press Call button until unit beeps and lights flash momentarily, Wait and watch signal lights: FLASHING
ORANGE- Searching for cellular signal, SOLID RED- Call cannot be placed because no cellular signal is available, SOLID
GREEN- Now dialing a 911 Operator, Listen for Operator
OPTIONAL: Press once to increase volume
To end the call, press the Signal button for one second
PANIC SIREN: Press both buttons until unit beeps
Stop siren: Press both buttons again for 3 seconds
While siren is sounding, you can still dial Operator.
Press and hold the red Call button
The siren will turn off automatically.
IMPORTANT SAFETY INFORMATION
• Most 911 Call Centers do not have the capability to identify the location of a cellular call, unless the caller verbally
provides that information. It is important to immediately identify your location to 911 operators when placing an emergency
call to 911. Before saying anything else to the 911 operator, give an address and/or any nearby landmarks to help speed
assistance.
• Do not hang up until instructed to do so by a 911 operator. If your 911 call somehow gets disconnected, Mobile911's
yellow "in use" light will turn off. Mobile911 cannot receive calls, so a 911 operator will be unable to call you back. Simply
press and hold the Call button for two seconds to place another 911 call.
• In the unlikely event that you press the Call button and you hear a recorded message, or a 911 operator does not
answer, simply press and hold the Signal button to "hang up". Press and hold the Call button again, and Mobile911 will
attempt to redial a 911 operator through an alternate cellular carrier. Please feel free to contact customer service with
questions or concerns.
Checking Batteries & Availability of Service
Press and hold the "signal" button until unit beeps.
After several flashes and beeps, the lights will display:
Green light - Cellular signal is available
Red light - Cellular signal is unavailable
All lights flash - batteries are weak and must be replaced
The lights will turn off automatically after 60 seconds.
Troubleshooting Problems
• Verify that the batteries are inserted correctly and are not weak.
• After pushing the red Call button until it beeps, look at the lights labeled "signal". If the red signal light becomes solid,
this indicates that no signal could be found and your call will not go through to a 911 operator.
INSTALLING BELT CLIP
Insert the belt clip into the slots on each side
Clip removes by releasing one side
Battery Maintenance
When batteries are low, the unit will beep and all lights flash after pressing and holding "signal" button. Check batteries
yearly even if the Mobile911 has not been used. Check batteries each time you place a 911 call. Use AAA alkaline
batteries only. Never put discarded batteries into a fire or physically damage them. Avoid mixing old and new batteries or
mixing different brands.
Maintenance
Clean Mobile911 with a soft, dry cloth. If necessary, dampen the cloth with diluted detergent then dry with a clean cloth.
Caution: Other cleaning chemicals may discolor the surface.
IMPOR TANT MESSAGE PLEASE READ
Mobile911 is not guaranteed to contact emergency services. Mobile911 is intended solely for use in the United States
and Canada. 911 emergency services are not available in all areas. Analog cellular service is not available in all areas.
Prior to your first use of Mobile911 you should call your local emergency communications office and verify that wireless
911 service is available in your area. You should also remember that the availability of wireless 911 does not mean
Mobile911 will always work. If you are in an area with insufficient cellular service, the call cannot be placed. Further, even
if you contact emergency services, the emergency service provider may not properly respond. You must also remember
to keep fresh batteries in Mobile911. In the United States, current Federal Communications Commission (FCC)
Regulations require cellular service providers to pass all 911 calls through to all 911 emergency centers that have
requested the calls regardless of whether the call originates from a cellular service provider’s paid subscriber. In Canada,
cellular service providers currently pass all 911 calls through to 911 centers on a voluntary basis. Should FCC regulations
change or if the policy of the Canadian service providers changes, 911 access through Mobile911 may be modified or
eliminated. Mobile911 should not be used in Nova Scotia according to Chapter 4 of the Nova Scotia Emergency "911" Act
of 1992, which states that no person shall use an automatic dialer to dial the number "911".
90-Day Limited Warranty
WHO IS COVERED? Only the original purchaser is covered. You must have the original sales invoice to obtain warranty
service.
WHAT IS COVERED? Mobile911 is warranted to be free from defects in materials and workmanship. Mobile911 IS NOT
GUARANTEED TO CONTACT EMERGENCY SERVICES IN ALL INSTANCES.
HOW DO I OBTAIN WARRANTY SERVICE? Contact SecureAlert, LLC at 1-888-809-1253. You will be given a return
authorization code and the address to which the defective product may be sent. You must send the defective product and
the original sales invoice, postage paid, to SecureAlert, LLC. SecureAlert, LLC will repair or replace the defective product
with a new, renewed, or comparable product at no charge to you. SecureAlert, LLC has sole discretion in determining
whether to repair or replace the product.
WHAT IS THE WARRANTY PERIOD? The warranty begins on the date you purchased Mobile911 and lasts for ninety
(90) days. When the warranty on the original product expires, the warranty on any replacement product also expires.
WHAT IS EXCLUDED? Your warranty does not cover:
• Product damaged by misuse, accident, unauthorized repair, or other causes not within the control of SecureAlert, LLC.
• Reception problems caused by signal conditions or cable or antenna systems outside the unit. SECUREALERT, LLC
MAKES NO OTHER WARRANTY EXCEPT AS SPECIFICALLY STATED ABOVE. ANY IMPLIED WARRANTIES
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE
LIMITED TO THE NINETY (90) DAY WARRANTY PERIOD.
LIABILITY LIMITATIONS
YOUR EXCULSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT AS STATED ABOVE. IN NO EVENT WILL
SECUREALERT, LLC , BE LIABLE TO ANY PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF
ANY NATURE ARISING FROM OR RELATING TO ANY USE OF Mobile911 INCLUDING DAMAGES FOR PERSONAL
INJURY OR DAMAGES TO PROPERTY, AND HOWEVER OCCASIONED. SECUREALERT, LLC'S LIABILITY WILL IN
NO EVENT EXCEED THE PRICE OF THE UNIT. ANY LAWSUIT OR OTHER ACTION AGAINST SECUREALERT, LLC,
IN CONNECTION WITH THE UNIT MUST BE FILED WITHIN ONE YEAR FROM THE DATE OF THE EVENT THAT
CAUSED THE LOSS, DAMAGE OR LIABILITY.
Some states do not allow for the exclusion of incidental or consequential damages, so the above exclusion may not apply
to you. Depending on your state, you may have other rights or remedies.
Specifications
Modulations: Data/Voice
Frequency Ranged: TX 824.04 MHz to 848.97 MHz / RX: 896.04 MHz to 893.97 MHz
Channel Spacing: 30 kHz
Duplex Spacing: 45 MHz
Operating Temps: -30 to +60 °C
Size: 2 in. (W) x 1 7/32” (D) x 6 1/16” (H)
50.5 mm (W) x 31 mm (D) x 154 mm (H)
U.S. Patent Number 6,044,257

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2001:02:16 09:13:20
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2001:02:16 09:13:22-05:00
Page Count                      : 3
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AMWUH052A

Navigation menu