Uniden America UU260 1.9 GHz UPCS CORDLESS HEADSET User Manual

Uniden America Corporation 1.9 GHz UPCS CORDLESS HEADSET Users Manual

Users Manual

xIf any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! xNeed Help? Get answers 24/7 at our website: www.uniden.com.If You... Contact Uniden’s... Phone Numberhave a question or problem Customer Care Line* 817-858-2929 or 800-297-1023need a part or accessory Parts Department* 800-554-3988need special assistance due to a disability Accessibility Help Line 800-874-9314 (voice or TTY)* During regular business hours, Central Standard Time. Visit our website for detailed business hours.Important Safety Instructions!When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of re, electric shock and injury to persons, including the following: xis unit is NOT waterproof. DO NOT expose this unit to rain or moisture. xDo not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. xAvoid using a telephone (other than a cordless type) during an electrical storm. ere may be a remote risk of electric shock from lightning. xDo not use the telephone to report a gas leak in the vicinity of the leak. SAVE THESE INSTRUCTIONS!AC adapter (PS-0045)Cordless headset with ear loop and ear cap attachedDHS100 Cordless Headset User's GuideWhat's in the box?PREPARING YOUR HEADSETAttach Earpiece Loop or Headband xChoose the appropriate size Earpiece Loop. xPush the selected Earpiece Loop or Headband eyelet onto headset mounting peg.Charge the Battery1. Connect the AC adapter to the charge cradle jack and to a wall outlet. 2. Place the headset in the charging cradle with the status LED facing forward. If the LED doesn’t light up, reseat the headset or connect the charger to a different outlet.3. When the headset is fully charged, the status LED will show blue. #Charge the headset completely (about 3 hours) before using it. #Do not charge the headset when the ambient temperature is below 0° C (32°F) or above 40°C (104°F).REGISTERING TO A BASE #The accessory headset won't work until you register it to a compatible Uniden cordless phone! Compatible Uniden Cordless PhonesFind compatible models at our website: www.uniden.com.Register the Headset1. On the phone base, press and hold FIND HANDSET for 5 seconds. #On some models (such as the D3588) press MENU, select Register handset from the display menu selection, and then press SElEcT.2. On the headset, press and hold both VOlUME - and + for 5 seconds.The status LED alternately blinks slow to fast blue and red while registering.When registered, a confirmation tone sounds at the phone base and the headset LED flashes blue once every 10 seconds.Test the connectionPick up the headset and press ON/OFF/TAlK. Listen for a dial tone. (Press ON/OFF/TAlK to hang up.)If... Try... xthere is no dial tone xthe error tone sounds charging the headset until fully charged and then retry connection.OPERATIONTo power on... To power off... xpress and hold ON/OFF/TAlK for 3 seconds. xpress and hold ON/OFF/TAlK for 3 seconds.To answer a call... To adjust call or ringer volume... xpress ON/OFF/TAlK and speak clearly xpress ON/OFF/TAlK again to end callcall (in use) or ringer (standby): xpress + to increase or – to decreaseTo mute the microphone... To answer call waiting call... xpress MUTE/FlASH to mute xpress MUTE/FlASH again to unmute xpress and hold MUTE/FlASH xpress and hold MUTE/FlASH to returnIMPORTANT INFORMATIONAC Adapter and Battery SpecicationsAC adapterPart number Input voltage Output voltagePS-0045 120VAC, 60 Hz 5.4VDC @ 400mA xUse only the supplied AC adapter. xDo not place the unit in direct sunlight or subject it to high temperatures.Battery information (battery is not user-replaceable)Type Capacity Talk time Standby timeLithium-ion 230mAh, 3.7VDC about 6 hours about 3 days xPlease contact Uniden Customer Service if the battery fails. xWhen the battery gets low, the headset sounds an alert tone and the status indicator shows red once every 10 seconds to indicate the unit needs charging.General InformatIon •You cannot use the headset while it is charging. •Actual range varies depending environmental conditions and battery power level.Cleaning the headsetIf necessary, remove the Ear Cap and Earpiece loop. Dampen a lint-free cloth with water or a cleaner specially designed for electronics, and gently wipe the headset clean. Do not expose this product to liquid (water, alcohol, etc.) or submerse in liquid for any reason.FlashMuteHeadset pegEarloopEarloop eyeletVOLUME +/-ON/OFF/TALK STATUS LED MUTE/FLASHCharge cradle Additional earpiece loops (2)Additional ear caps (2)Headband
Compliance InformationAny changes or modications to this product not expressly approved by the manufacturer or other party responsible for compliance could void your authority to operate this product.FCC Part 15 Informationis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) is device may not cause harmful interference, and (2) is device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this phone.FCC PART 15.105(b): Note: is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. ese limits are designed to provide reasonable protection against harmful interference in a residential installation. is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: xReorient or relocate the receiving antenna. xIncrease the separation between the equipment and receiver. xConnect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. xConsult the dealer or an experienced radio/TV technician for help.RF Exposure Informationis product complies with FCC radiation exposure limits under the following conditions: xe base must be placed to allow a minimum of 20 cm (8 inches) between the antenna and all persons during normal operation. xe base must not be collocated or operated in conjunction with any other antenna or trans-mitter. xe headset is designed for body-worn operation and meets FCC RF exposure guidelines when used with any belt clip, carrying case, or other accessory supplied with this product. (All nec-essary accessories are included in the package; any additional or optional accessories are not required for compliance with the guidelines.) ird party accessories (unless approved by the manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines.Industry Canada (I.C.) NoticeTerminal equipmentNOTICE: is equipment meets the applicable Industry Canada Terminal Equipment Technical Specications. is is conrmed by the registration number. e abbreviation IC before the registration number signies that registration was performed based on a Decla-ration of Conformity indicating that Industry Canada technical specications were met. It does not imply that Industry Canada approved the equipment.NOTICE: e Ringer Equivalence Number (REN) for this terminal equipment is marked on the equipment itself. e REN assigned to each terminal equipment provides an indica-tion of the maximum number of terminals allowed to be connected to a telephone interface. e termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.Radio equipmente term IC before the radio certication number only signies that Industry Canada technical specications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. "Privacy of com-munications may not be ensured when using this telephone".One-year Limited WarrantyEvidence of original purchase is required for warranty service.WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner, this Uniden Product to be free from defects in materials and crasmanship with only the limitations or exclusions set out below.WARRANTY DURATION: is warranty to the original user shall terminate and be of no further eect 12 months aer the date of original retail sale. e warranty is invalid if the Product is (A) damaged or not maintained as reasonable or necessary, (B) modied, altered, or used as part of any conversion kits, subassemblies, or any congurations not sold by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an authorized Uniden service center for a defect or malfunction covered by this warranty, (E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's manual for this product.STATEMENT OF REMEDY: In the event that the product does not conform to this warran-ty at any time while this warranty is in eect, warrantor will either, at its option, repair or replace the defective unit and return it to you without charge for parts, service, or any other cost (except shipping and handling) incurred by warrantor or its representatives in connec-tion with the performance of this warranty. Warrantor, at its option, may replace the unit with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER, WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSE-QUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you.LEGAL REMEDIES: is warranty gives you specic legal rights, and you may also have other rights which vary from state to state. is warranty is void outside the United States of America and Canada.PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, aer following the instructions in the owner's manual you are certain that the Product is defective, pack the Product carefully (preferably in its original packaging). Disconnect the battery from the Product and separately secure the battery in its own separate packaging within the shipping carton. e Product should include all parts and accessories originally packaged with the Product. Include evidence of original purchase and a note describing the defect that has caused you to return it. e Product should be shipped freight prepaid, by traceable means, to warrantor at:Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155 xUniden® is a registered trade-mark of Uniden America Corporation. xCall waiting, CID, CIDCW, and Voice Mail are telephone line services. Your phone supports these services, but you have to arrange for them through your telephone pro-vider. Contact your provider for details. xe pictures in this manual are for example only. Your phone may not look exactly like the pictures.As an Energy Star® Partner, Uniden has determined that this product meets the Energy Star® guidelines for energy eciency. Energy Star® is a U.S. registered mark.© 2012 Uniden America Corp. Printed in Vietnam Fort Worth, Texas U01UU260BZA(0)

Navigation menu