Uniden America UU260 1.9 GHz UPCS CORDLESS HEADSET User Manual

Uniden America Corporation 1.9 GHz UPCS CORDLESS HEADSET Users Manual

Users Manual

xIf any items are missing or damaged, contact our Customer Care
Line immediately. Never use damaged products!
xNeed Help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care Line* 817-858-2929 or
800-297-1023
need a part or accessory Parts Department* 800-554-3988
need special assistance due
to a disability Accessibility Help Line 800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed
business hours.
Important Safety Instructions!
When using your telephone equipment, basic safety precautions should always be
followed to reduce the risk of re, electric shock and injury to persons, including the
following:
xis unit is NOT waterproof. DO NOT expose this unit to rain or moisture.
xDo not use this product near water, for example, near a bath tub, wash bowl, kitchen
sink or laundry tub, in a wet basement or near a swimming pool.
xAvoid using a telephone (other than a cordless type) during an electrical storm. ere
may be a remote risk of electric shock from lightning.
xDo not use the telephone to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS!
AC adapter
(PS-0045)
Cordless
headset with
ear loop
and ear cap
attached
DHS100 Cordless Headset User's Guide
What's in the box?
PREPARING YOUR HEADSET
Attach Earpiece Loop or Headband
xChoose the appropriate size Earpiece Loop.
xPush the selected Earpiece Loop or Headband
eyelet onto headset mounting peg.
Charge the Battery
1. Connect the AC adapter to the
charge cradle jack and to a wall
outlet.
2. Place the headset in the charging
cradle with the status LED
facing forward. If the LED
doesn’t light up, reseat the
headset or connect the charger
to a different outlet.
3. When the headset is fully charged, the status LED will show blue.
#Charge the headset completely (about 3 hours) before using it.
#Do not charge the headset when the ambient temperature is below
0° C (32°F) or above 40°C (104°F).
REGISTERING TO A BASE
#The accessory headset won't work until you register it to a
compatible Uniden cordless phone!
Compatible Uniden Cordless Phones
Find compatible models at our website: www.uniden.com.
Register the Headset
1. On the phone base, press and hold
FIND HANDSET
for 5 seconds.
#On some models (such as the D3588) press
MENU
, select Register handset
from the display menu selection, and then press
SElEcT.
2. On the headset, press and hold both
VOlUME
-
and
+
for 5 seconds.
The status LED alternately blinks slow to fast blue and red while registering.
When registered, a confirmation tone sounds at the phone base and the
headset LED flashes blue once every 10 seconds.
Test the connection
Pick up the headset and press
ON/OFF/TAlK
. Listen for a dial tone. (Press
ON/
OFF/TAlK
to hang up.)
If... Try...
xthere is no dial tone
xthe error tone sounds
charging the headset until fully
charged and then retry connection.
OPERATION
To power on... To power off...
xpress and hold
ON/OFF/TAlK
for 3
seconds
.
xpress and hold
ON/OFF/TAlK
for 3
seconds
.
To answer a call... To adjust call or ringer volume...
xpress
ON/OFF/TAlK
and speak clearly
xpress
ON/OFF/TAlK
again to end call
call (in use) or ringer (standby):
xpress
+
to increase or
to decrease
To mute the microphone... To answer call waiting call...
xpress
MUTE/FlASH
to mute
xpress
MUTE/FlASH
again to unmute
xpress and hold
MUTE/FlASH
xpress and hold
MUTE/FlASH
to return
IMPORTANT INFORMATION
AC Adapter and Battery Specications
AC adapter
Part number Input voltage Output voltage
PS-0045 120VAC, 60 Hz 5.4VDC @ 400mA
xUse only the supplied AC adapter.
xDo not place the unit in direct sunlight or subject it to high temperatures.
Battery information (battery is not user-replaceable)
Type Capacity Talk time Standby time
Lithium-ion 230mAh, 3.7VDC about 6 hours about 3 days
xPlease contact Uniden Customer Service if the battery fails.
xWhen the battery gets low, the headset sounds an alert tone and the status indicator shows red
once every 10 seconds to indicate the unit needs charging.
General InformatIon
You cannot use the headset while it is charging.
Actual range varies depending environmental conditions and battery power level.
Cleaning the headset
If necessary, remove the Ear Cap and Earpiece loop. Dampen a lint-free cloth with water or
a cleaner specially designed for electronics, and gently wipe the headset clean.
Do not expose this product to liquid (water, alcohol, etc.) or
submerse in liquid for any reason.
Flash
Mute
Headset peg
Earloop
Earloop
eyelet
VOLUME +/-
ON/OFF/TALK
STATUS LED
MUTE/FLASH
Charge cradle Additional
earpiece loops (2)
Additional ear caps (2)
Headband
Compliance Information
Any changes or modications to this product not expressly approved by the manufacturer
or other party responsible for compliance could void your authority to operate this product.
FCC Part 15 Information
is device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) is device may not cause harmful interference, and (2) is device
must accept any interference received, including interference that may cause undesired
operation. Privacy of communications may not be ensured when using this phone.
FCC PART 15.105(b): Note: is equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. ese limits
are designed to provide reasonable protection against harmful interference in a residential
installation. is equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment o and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
xReorient or relocate the receiving antenna.
xIncrease the separation between the equipment and receiver.
xConnect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
xConsult the dealer or an experienced radio/TV technician for help.
RF Exposure Information
is product complies with FCC radiation exposure limits under the following conditions:
xe base must be placed to allow a minimum of 20 cm (8 inches) between the antenna and all
persons during normal operation.
xe base must not be collocated or operated in conjunction with any other antenna or trans-
mitter.
xe headset is designed for body-worn operation and meets FCC RF exposure guidelines when
used with any belt clip, carrying case, or other accessory supplied with this product. (All nec-
essary accessories are included in the package; any additional or optional accessories are not
required for compliance with the guidelines.) ird party accessories (unless approved by the
manufacturer) should be avoided as these might not comply with FCC RF exposure guidelines.
Industry Canada (I.C.) Notice
Terminal equipment
NOTICE: is equipment meets the applicable Industry Canada Terminal Equipment
Technical Specications. is is conrmed by the registration number. e abbreviation IC
before the registration number signies that registration was performed based on a Decla-
ration of Conformity indicating that Industry Canada technical specications were met. It
does not imply that Industry Canada approved the equipment.
NOTICE: e Ringer Equivalence Number (REN) for this terminal equipment is marked
on the equipment itself. e REN assigned to each terminal equipment provides an indica-
tion of the maximum number of terminals allowed to be connected to a telephone interface.
e termination on an interface may consist of any combination of devices subject only to
the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not
exceed 5.
Radio equipment
e term IC before the radio certication number only signies that Industry Canada
technical specications were met. Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device. "Privacy of com-
munications may not be ensured when using this telephone".
One-year Limited Warranty
Evidence of original purchase is required for warranty service.
WARRANTOR: UNIDEN AMERICA CORPORATION ("Uniden")
ELEMENTS OF WARRANTY: Uniden warrants, for one year, to the original retail owner,
this Uniden Product to be free from defects in materials and crasmanship with only the
limitations or exclusions set out below.
WARRANTY DURATION: is warranty to the original user shall terminate and be of
no further eect 12 months aer the date of original retail sale. e warranty is invalid if
the Product is (A) damaged or not maintained as reasonable or necessary, (B) modied,
altered, or used as part of any conversion kits, subassemblies, or any congurations not sold
by Uniden, (C) improperly installed, (D) serviced or repaired by someone other than an
authorized Uniden service center for a defect or malfunction covered by this warranty, (E)
used in any conjunction with equipment or parts or as part of any system not manufactured
by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner's
manual for this product.
STATEMENT OF REMEDY: In the event that the product does not conform to this warran-
ty at any time while this warranty is in eect, warrantor will either, at its option, repair or
replace the defective unit and return it to you without charge for parts, service, or any other
cost (except shipping and handling) incurred by warrantor or its representatives in connec-
tion with the performance of this warranty. Warrantor, at its option, may replace the unit
with a new or refurbished unit. THE LIMITED WARRANTY SET FORTH ABOVE IS THE
SOLE AND ENTIRE WARRANTY PERTAINING TO THE PRODUCT AND IS IN LIEU
OF AND EXCLUDES ALL OTHER WARRANTIES OF ANY NATURE WHATSOEVER,
WHETHER EXPRESS, IMPLIED OR ARISING BY OPERATION OF LAW, INCLUDING,
BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. THIS WARRANTY DOES NOT COVER OR
PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. Some states do not allow this exclusion or limitation of incidental
or consequential damages so the above limitation or exclusion may not apply to you.
LEGAL REMEDIES: is warranty gives you specic legal rights, and you may also have
other rights which vary from state to state. is warranty is void outside the United States
of America and Canada.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: If, aer following
the instructions in the owner's manual you are certain that the Product is defective, pack
the Product carefully (preferably in its original packaging). Disconnect the battery from the
Product and separately secure the battery in its own separate packaging within the shipping
carton. e Product should include all parts and accessories originally packaged with the
Product. Include evidence of original purchase and a note describing the defect that has
caused you to return it. e Product should be shipped freight prepaid, by traceable means,
to warrantor at:
Uniden America Service
4700 Amon Carter Blvd.
Fort Worth, TX 76155
xUniden® is a registered trade-
mark of Uniden America
Corporation.
xCall waiting, CID, CIDCW,
and Voice Mail are telephone line services. Your phone supports these
services, but you have to arrange for them through your telephone pro-
vider. Contact your provider for details.
xe pictures in this manual are for example only. Your phone may not look exactly like the
pictures.
As an Energy Star® Partner, Uniden
has determined that this product
meets the Energy Star® guidelines for
energy eciency. Energy Star® is a U.S.
registered mark.
© 2012 Uniden America Corp. Printed in Vietnam
Fort Worth, Texas U01UU260BZA(0)

Navigation menu