Uniden Uh013 Users Manual
UH013 to the manual 8ae5f2d5-0aef-d174-5568-d16ad708be1d
2015-02-10
: Uniden Uniden-Uh013-Users-Manual-360148 uniden-uh013-users-manual-360148 uniden pdf
Open the PDF directly: View PDF 
.
Page Count: 19
| Download | |
| Open PDF In Browser | View PDF |
OWNER’S MANUAL UNIDEN Model UH013 UHF CB Radio UNIDEN Model UH013 UHF CB Radio Contents Introduction Features Preventive Maintenance Troubleshooting Controls / Connectors Indicators Included with your UH013 Mounting Options Operation Setting the Squelch Monitor Selecting a Channel Transmitting Using Repeater Channels Operating the UH013 in Duplex Mode Scanning Open Scan (OS) Mode Group Scan (GS) Mode Programming Scan Channels Busy Channel Lockout VOX Operation (optional VOX headset required) Programming the Instant Priority Channel Recalling the Instant Channel CTCSS (Continuous Tone Coded Squelch System) Wide Band Scanning Searching Scanning Stored Frequencies Programming Scan Frequencies Selective Calling (Optional Selcall PCB Required) Frequency & CTCSS Tone Lists Warranty 1 2 2 2 2 3 4 5 6 8 8 8 9 9 9 10 10 10 11 11 12 12 12 12 13 13 14 14 14 15 16 17 UNIDEN Model UH013 UHF CB Radio Introduction The Uniden UH013 is designed to provide you with years of trouble free service. Its rugged components and materials are capable of withstanding harsh environments. We are certain that you will enjoy your UH013. Please read this Operating Manual carefully to ensure you gain the optimum performance of the unit. Features Detachable Display Unit Open Scan Transmit & Receive FM 40CH (UHF-CB, TX Power 5w) Busy Channel Lock-out 2 Levels Preset Squelch 38 Built-in CTCSS codes Wide Band Scanner (400MHz - 512MHz) = WS Function Volume Control with Power On/Off Switch Band Search Function (4 Bands separately) LCD Display with Backlight VOX (Voice Activated Function) optional VOX headset required Signal Strength Meter 9 Step VOX Mic sensitivity adjustment RF Power Indicator Memory backup if power fails One touch Instant Channel recalling Optional Tone Squelch Unit Function Duplex Capability (from CH01 - CH08 per channel) Tone Squelch Function (5/6 Tone) optional Group Scan and Priority Channel Watch Tone Calling Function (5/6 Tone) optional Tone Squelch Scan optional Preventive Maintenance: The following system checks should be made every six to twelve months: Check the Standing Wave Ratio (SWR). Inspect the tightness of all electrical connections. Inspect the antenna coaxial cable for wear or breaks on the shielding. Inspect the tightness of all screws and other mounting hardware. Troubleshooting: Should the unit malfunction or perform poorly, follow these procedures: If the transceiver is completely inoperative: Check the power cord and fuse. If there is trouble with receiving: Check the VOLUME control setting. Be sure the SQUELCH is adjusted properly. Possibly the radio is over-squelched. If there is trouble with transmitting: Check that the transmission line (coaxial cable) is securely connected to the ANTENNA connector. Check that the antenna is fully extended for proper operation. Check that all transmission line (coaxial cable) connections are secure and free of corrosion. NOTE Blackening may occur on the Liquid Crystal Display if the UH013 has been subjected to extreme high temperature (above 60°C) . This is not a fault. Normal LCD operation resumes when the temperature stabilizes back to standard operating conditions (0 to 55°C). 2 UNIDEN Model UH013 UHF CB Radio Controls / Connectors 1 2 5 3 6 4 Rotary Channel Selector VOX CTCSS TX WS CAL TSQ DUP MON SCN GS BCL INS VOL SLT SLT SRC HLD SQT M MHz S/RF SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS Front 7 8 9 10 12 11 15 Rear EXT.SP. 13 DC 13.8V 14 UHF ANT. Controls and Connectors Ref. Item Page Ref. Item Page 1 Liquid Crystal Display (LCD) 4 9 SCAN - Open or Group Scan 10, 11 2 Rotary Channel Selector 9 10 MEM - Memory Button 11 3 On/Off Volume 8 11 12 4 Push to Talk (PTT) Button 9 INST - Instant Set, Instant Channel Recall and Instant Channel Programming 5 Tone Call 15 12 SQT - Squelch Mode 13 6 Monitor Button 8 13 External Speaker Jack - 7 SLCT - Select Button 12, 13 14 Power Input (13.8V DC) - 8 SRCH - Search Button 14 15 UHF Antenna Connection - 3 UNIDEN Model UH013 UHF CB Radio Indicators 16 23 22 21 20 19 17 18 24 VOX CTCSS TX WS CAL TSQ DUP MON SCN GS BCL INS 25 26 SLT SRC HLD SQT M MHz S/RF 29 31 27 28 30 32 33 Page Ref. 34 35 Indicators Item Page 16 VOX - Voice Operated Microphone 12 26 SCN - Scan 10 17 CTCSS - Continuous Tone Coded Squelch System 13 27 SLT - Select 9 28 SRC - Search 14 18 INS - Instant Channel 12 29 HLD - Hold 14 30 BCL - Busy Channel Lockout 12 Ref. Item 19 DUP - Duplex 9 - 10 20 TSQ - Tone Squelch (Optional) 9 31 SQT - Squelch Tight 21 CAL - Tone Call (Optional) 15 22 WS - Wide Band Scanner 13 32 M 33 23 TX - Transmit 24 GS - Group Scan 25 MON - Monitor 9 34 11 - Memory - Channel Number - CTCSS Code 35 S/RF - RF Signal Strength 8 4 8 14 - UNIDEN Model UH013 UHF CB Radio Included with your UH013 OWNER’ S MANU AL 013 Model UH UNIDENF CB Radio UH UH013 Owners Manual Display Mount Bracket Microphone Transceiver Microphone Hanger, Screws and Washers Mounting Bracket, Knobs, Washer Stars and Screws FIX AF MP A ST RE HE UH013 Lim Pty lia ion VOL SLCT STORE SRCH TSQ SCAN OS/GS MEM DUP INST SET/SKIP d ite a is y str Div wa 6 Au e igh 21 en ic H 2 id Serv ces SW Un ttn: Prin le N A 45 da ALIA 3 o ck TR R US A SQT CTCSS Display Unit DC Power Cord with Fuse Display Rear Bracket Extension Cable 5 Consumer Support Card UNIDEN Model UH013 UHF CB Radio Mounting Options The radio can be mounted complete - or - with the Display Unit remote of the Transceiver. Mounting the complete radio (Transceiver with Display Unit) a) b) b c) a c Plug in display cable from the Display Unit to the transceiver. Hinge the Display Unit into the transceiver as shown in the diagram, then snap closed. Should you wish, at a later stage, to position the Display Unit remote from the Transceiver, release the Display Unit by pushing up the slide on the side. b Remote mounting of the Transceiver Unit If the Display Unit is not already separate of the Transceiver then remove it as detailed in c) above. Fix the Transceiver Mounting Bracket in an appropriate location (screws and washers supplied). Then fix the Transceiver in the bracket using the Knob bolts supplied d). The bracket can be fixed on the top or under the transceiver. An arced slot e) allows you to mount the transceiver at an angle. e d 6 UNIDEN Model UH013 UHF CB Radio Mounting Options Remote mounting of the Display Unit a Fixing the Display Rear Bracket To mount the Display Unit it needs to be fitted with a Display Rear Bracket (included in package). a) Position the Display Rear Bracket so that one end fits over the two studs at the end of the Display Unit. Push it into place until the fixing screw hole is aligned with its threaded counterpart. Secure the Display Rear Bracket with the screw provided. b) c) b c Top fix d Optional mounting positions The Display Unit can be mounted from the top, back or bottom. d) Fix the Display Mount Bracket in place (above, at the rear or at the bottom) by screwing through the slots in the bracket. e) Fix the Display Unit to the bracket with the thumb screws provided. f) Connect the Extension Cable between the Display Unit and the Transceiver. Back fix Bottom fix e UH013 VOL f SLCT STORE SRCH TSQ MEM DUP SCAN OS/GS 7 INST SET/SKIP SQT CTCSS UNIDEN Model UH013 UHF CB Radio Operation Setting the Squelch Turn the Unit ON by rotating the volume control clockwise. The UH013 has 2 Levels Preset Squelch. It requires no adjustment. However, if you are in a very high noise area it may break through. Press SQT to select the tight squelch mode. The SQT icon appears. NOTE CAL TSQ DUP Rotary Channel Selector MON SCN GS BCL INS SLT VOL SRC HLD SQT M S/RF MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS Selecting tight squelch mode may prevent the reception of weak signals. Strong Signals Medium Signals Weak Signals Noise Think of the squelch control as a gate. If the squelch is fully closed no signal can get through. Strong Signals Strong Signals Medium Signals Medium Signals Weak Signals Weak Signals Noise Noise If the squelch is fully open ‘Monitor Mode’ it allows all signals to get through - weak, medium and strong signals and noise. By setting the squelch to ‘threshold’, it blocks out all weak signals and noise and allows only the required medium and stronger signals to pass through. Strong noise may still break through. Press SQT to select the ‘Tight Squelch’ mode. The SQT icon appears. MONI Monitor Press the MONI button on the microphone to open the squelch and receive all weak signals. Press and hold the MONI button for 2 seconds to hold the squelch open (Monitor Mode). Press MONI again momentarily to cancel. 8 UNIDEN Model UH013 UHF CB Radio Operation Selecting a Channel Turn the Rotary Channel Selector to select the desired channel. Rotary Channel Selector CAL TSQ DUP MON SCN GS BCL INS SLT SRC HLD SQT M S/RF MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS PTT Transmitting Select the desired channel. Press the Microphone’s PTT button and speak normally into the microphone. Hold it approx. 7cm from your mouth. Release the PTT button to end the transmission and listen for a reply. Using Repeater Channels UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions. In normal Simplex operation, your radio transmits on one particular frequency and receives on that same frequency. If there is a barrier that partially blocks your transmitted signal, the probability of another radio receiving the signal is very slim. Hills, tall buildings, metallic structures, ... etc. tend to act as a screen between radios. Repeater Station Normal Simplex Operation Transmitting on CH 31 CH 31 CH 01 No Signal being Received Operation with the aid of Repeater Station (Duplex) Standard Operation without the aid of a Repeater Station The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same time on another channel. This operation is called "Duplexing". For example, CH01 on Duplex Mode will Receive on CH 01 but Transmit on CH31 CH02 on Duplex Mode will Receive on CH 02 but Transmit on CH32 etc .... If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, the repeater station down-converts your signal and retransmits on CH01. 9 UNIDEN Model UH013 UHF CB Radio Operation Operating the UH013 in Duplex Mode For this example we are adopting CH01 as the channel being used in your area for repeater use. Press and hold DUP for 2 seconds to switch Duplex ON. The DUP icon appears. If Duplex is not required - press DUP and hold for 2 seconds again to switch Duplex off. Only channels 01 - 08 are available for Duplex NOTE CAL TSQ DUP MON SCN GS BCL INS SLT VOL SRC HLD SQT M S/RF MHz SRCH SCAN MEM INST SQT TSQ OS/GS DUP SET/SKIP CTCSS Check with your local Retailer for information on available Repeaters. Scanning The UH013 has a scanning feature that allows you to search for active channels automatically. Furthermore, the UH013 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning (GS), to give you flexibility and allow you to use the radio more effectively. Press SCAN and Scanning starts. The SCN icon appears. CAL TSQ DUP Press SCAN again to stop scanning. MON SCN GS BCL INS SLT SRC HLD SQT M S/RF MHz SRCH SCAN MEM INST SQT TSQ OS/GS DUP SET/SKIP CTCSS Open Scan (OS) Mode Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning will stop on that channel. CAL TSQ DUP VOX CTCSS This example shows CH40 active. MON SCN GS BCL INS SLT SRC HLD SQT M If the received signal ceases, the unit will wait 3 seconds for the signal S/RF to return, otherwise scanning resumes. To skip the active channel, press MEM momentarily. Scanning resumes. To deactivate SCAN, press SCAN or the PTT button on the microphone. MHz NOTE If SCAN is deactivated while on an active channel, the UH013 will stay on that active channel. If no channels are active, the UH013 will reinstate the starting channel. NOTE 10 OS Mode is indicated by the absence of the GS icon. UNIDEN Model UH013 UHF CB Radio Operation Group Scan (GS) Mode Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p.12) To use GS Mode Scanning, press and hold SCAN for 2 seconds. VOX CAL TSQ DUP GS icon appears on the display. CTCSS MON SCN GS BCL INS SLT SRC HLD SQT M S/RF GS Scanning checks the Instant Priority Channel for activity regularly. If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If the received signal ceases, Priority Scanning continues after 3 seconds. If scanning stops on a channel which is not a Priority Channel, UH013 will continue monitoring the Priority Channel for activity while listening to the active one. To deactivate SCAN, press the SCAN button or the PTT button. CAL TSQ DUP Rotary MON SCN GS BCL INS Press and hold SCAN for 2 seconds to turn Channel SLT SRC HLD SQT M off Group Scan Mode. Selector MHz S/RF MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS NOTE If SCAN is deactivated while it is tuned to an active channel, the UH013 will stay on that active channel. If none of the channels are active, the UH013 will reinstate the Starting Channel. If SCAN is deactivated while it is turned to the Instant Priority Channel, the UH013 will remain on the Instant Priority Channel. NOTE If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone will be heard and scanning will not start (see Programming Scan Channels - below). Programming Scan Channels Select which Scanning Mode you wish to use - OS or GS. Select the channel you want to store. Press MEM to store. M icon appears and a short tone beep is heard. To remove the channel from Memory, press MEM once more. The M icon disappears. NOTE CAL TSQ DUP Rotary Channel Selector MON SCN GS BCL INS SLT SRC HLD SQT M S/RF MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS OS is indicated by the absence of the GS icon. 11 UNIDEN Model UH013 UHF CB Radio Operation Busy Channel Lockout If the channel is already in use, you can prevent the UH013 from transmitting . This is particularly important when using CTCSS. Press SLCT 2 times. Turn the Rotary Channel Selector to display . Press and hold SLCT for 2 seconds to store the new setting. NOTE If a button is not pressed within 10 seconds the UH013 will automatically exit Select Mode. Rotary Channel Selector CAL TSQ DUP MON SCN GS BCL INS SLT SRC HLD SQT M SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS VOX Operation (optional VOX headset required) Press SLCT 3 times. Turn the Rotary Channel Selector to select the desired VOX sensitivity (1 - 9). CAL TSQ DUP Press and hold for 2 seconds to store the new setting. Connect the VOX headset. SLCT NOTE If a button is not pressed within 10 seconds the UH013 will automatically exit Select Mode. Rotary Channel Selector VOX MON SCN GS BCL INS SLT SRC HLD SQT M S/RF SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS Programming the Instant Priority Channel Turn the Rotary Channel Selector to select the Priority Channel you prefer. Press and hold INST for 2 seconds to store the new setting. INS icon appears. CAL TSQ DUP Rotary Channel Selector MON SCN GS BCL INS SLT SRC HLD SQT M S/RF MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS Recalling the Instant Channel Momentarily press the INST key at any time to return to the Instant Channel. 12 UNIDEN Model UH013 UHF CB Radio Operation C T C S S (Continuous Tone Coded Squelch System) Turn the Rotary Channel Selector to the desired channel to use CTCSS. Press and hold SQT for 2 seconds. CTCSS icon flashes. Turn the Rotary Channel Selector to select the desired CTCSS code 01 - 38. Press SQT once to store the new setting. NOTE Rotary Channel Selector CTCSS MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS Channels 05 and 35 are Emergency Channels and channel 11 is a Calling Channel. CTCSS cannot be selected on these channels. NOTE If a button is not pressed within 10 seconds the UH013 will automatically exit Select Mode. Wide Band Scanning The UH013 can also scan a wider band of frequencies (Step: 12.5 KHz). Band A B C D Frequencies 400 MHz - 420 MHz 420 MHz - 450 MHz 450 MHz - 470 MHz 470 MHz - 512 MHz 1. Press SLCT once. 2. Turn the Channel Selector to select . 3. Press and hold SLCT for 2 seconds to store the new setting. Searching of band A will immediately begin. NOTE Rotary Channel Selector Transmission is not possible on wide band frequencies. WS CAL TSQ DUP MON SCN GS BCL INS SLT SRC HLD SQT M SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS 13 UNIDEN Model UH013 UHF CB Radio Operation Searching Searching checks every frequency within the Band. If an active channel is located the UH013 will stop on that channel until 2 seconds after the transmission ends, then continue. Search Hold 1. To stop the search, press SRCH at any time. HLD is displayed. 2. To continue, press SRCH again. Skip If a particular frequency continues to interrupt searching, you can set your radio to skip the frequency by pressing the INST button during search hold (you may skip up to 10 frequencies). To cancel Skip, press INST again while search holding at the desired frequency. To cancel all Skipped frequencies, press and hold INST for 2 seconds during search hold. Changing the Search Band While searching press and hold SRCH for 2 seconds. The UH013 will move to the next band. Rotary Channel Selector TX WS CAL TSQ DUP MON SCN GS BCL INS VOL SLT SLT SRC HLD SQT M S/RF MHz SLCT SRCH SCAN MEM INST SQT STORE TSQ OS/GS DUP SET/SKIP CTCSS Scanning Stored Frequencies You may store up to 40 frequencies from any band into memory and then only scan those frequencies for activity. 1. Select Wide Band Scanning (see page 13). 2. Press SCAN . 3. To stop the Scan, press SCAN at any time. HLD is displayed. 4. To continue, press SCAN again. Programming Scan Frequencies 1. Select wide band scanning (see page 13). 2. Press SCAN and turn the Channel selector to choose a memory location (41 - 80). 3. Press SRCH to approach the desired frequency. 4. Turn the Channel Selector to stop searching and fine tune to the exact frequency. 5. Press MEM to store the selected frequency. NOTE Repeat procedure as necessary to programme the other memory locations. Deleting stored frequencies 1. Select the desired memory location. 2. Press and hold SCAN for 2 seconds to delete the selected frequency. 14 UNIDEN Model UH013 UHF CB Radio Selective Calling (Optional Selcall PCB Required) Outline Selective Calling (SELCALL) is a special Sequential Tone Squelch System that allows the user to receive/transmit calls selectively from/to an individual or group, on a shared busy channel. The UH013 has an Optional Selective Calling system. Exceptional features, like Receiver Quieting, Tone Squelch Scanning, Tone and Group Calling make the UH013 superior to any transceivers in its class. Receiver Quieting (Tone Squelch) When activated, it automatically mutes the receiver audio circuit of the radio. It will stay in this ‘Quiet’ mode as long as the SELCALL tone code (SELCALL ID) required to open the muting circuit is not received. Call Alarm When a received code matches to your SELCALL ID, an alarm (CA Alert) will be emitted informing you that a caller is on the channel. Tone Squelch Scanning Scans only tone squelched Channels. Tone Calling Allows you to selectively call another radio. Group Calling Capability Transmits and Responds to Group Calls. 15 UNIDEN Model UH013 UHF CB Radio Frequency & CTCSS Tone Lists FM UHF - CB Frequency List - Australia & New Zealand Simplex Mode Transmit / Receive Frequency (MHz) Duplex Mode Transmit Frequency (MHz) Simplex Mode Transmit / Receive CH No. Frequency (MHz) CH No. 476.425 477.175 CH31 21 01 476.925 476.450 477.200 CH32 22 02 476.950 476.475 477.225 CH33 03 23 476.975 477.250 CH34 476.500 04 24 477.000 476.525 477.275 CH35 05 25 477.025 477.300 CH36 476.550 06 26 477.050 477.325 CH37 476.575 07 27 477.075 477.350 CH38 476.600 08 28 477.100 476.625 09 29 477.125 476.650 10 30 477.150 476.675 11 31 477.175 476.700 12 32 477.200 476.725 13 33 477.225 476.750 14 34 477.250 476.775 15 35 477.275 476.800 16 36 477.300 476.825 17 37 477.325 476.850 18 38 477.350 476.875 19 39 477.375 476.900 20 40 477.400 NOTE: Channel 05 and 35 are Emergency Channels and channel 11 is a Calling Channel. CTCSS TONE List Tone No. Tone Frequency (Hz) Tone No. Tone Frequency (Hz) 00 (’oF’) 01 02 03 04 05 06 07 08 09 10 11 12 OFF 13 103.5 67.0 14 107.2 71.9 15 110.9 74.4 16 114.8 77.0 17 118.8 79.7 18 123.0 82.5 19 127.3 85.4 20 131.8 88.5 21 136.5 91.5 22 141.3 94.8 146.2 23 97.4 151.4 24 100.0 156.7 25 NOTE: Channel 05 11 and 35 are not CTCSS programmable. 16 Tone No. Tone Frequency (Hz) 26 27 28 29 30 31 32 33 34 35 36 37 38 162.2 167.9 173.8 179.9 186.2 192.8 203.5 210.7 218.1 225.7 233.6 241.8 250.3 UNIDEN Model UH013 UHF CB Radio Warranty ONE YEAR LIMITED WARRANTY IMPORTANT: Evidence of the original purchase is required for warranty service. WARRANTOR: Uniden New Zealand Limited. Uniden Australia Pty Ltd. ACN 001 865 498 ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this warranty its UH013 (hereinafter referred to as the Product), to be free from defects in materials and craftsmanship with only the limitations or exclusions set out below. WARRANTY DURATION: This warranty to the original retail owner only is only valid in the original country of purchase and shall be of no further effect 12 months after the date of original retail sale. This warranty will be deemed invalid if the Product is: (A) Damaged or not maintained as reasonable and necessary, (B) Modified, altered or used as part of any conversion kits, subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D) Repaired by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered by this warranty, (E) Used in conjunction with any equipment or parts or as a part of a system not manufactured by Uniden. (F) Only available in the original country of sale. PARTS COVERED: This warranty covers for one (1) year, the UH013 tranceiver only. All accessories (Mounting bracket, Microphone etc.) are covered for 90 days only. STATEMENT OF REMEDY: In the event that the Product does not conform to this warranty at any time while this warranty is in effect, the warrantor, at its discretion, will repair the defect or replace the Product and return it to you without charge for parts and service. THIS WARRANTY DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT IN ANY WAY AFFECT YOUR RIGHTS UNDER THE CONSUMER GUARANTEE ACT. PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: in the event that the Product does not conform to this warranty, the Product should be shipped or delivered, freight prepaid, with evidence of original purchase (e.g. a copy of the sales docket) to the warrantor at: UNIDEN AUSTRALIA PTY LIMITED SERVICE DIVISION 345 Princes Highway, Rockdale, NSW 2216, AUSTRALIA Ph: (02) 9599-3100 Fax: (02) 9599-3278 Toll Free: 1300 36 895 UNIDEN NEW ZEALAND LIMITED SERVICE DIVISION 150 Harris Road, East Tamaki, Auckland, NEW ZEALAND Ph: (09) 273 8383 Fax: 274 0009 Toll Free: 0800 486 4336 www.uniden.com.au www.uniden.co.nz 17 C 2002 Uniden Australia Pty Limited / Uniden New Zealand Limited Printed in the Philippines PPC: UTZZ01887ZZ
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 19EXIF Metadata provided by EXIF.tools