Uniden Uh013 Users Manual

UH013 to the manual 8ae5f2d5-0aef-d174-5568-d16ad708be1d

2015-02-10

: Uniden Uniden-Uh013-Users-Manual-360148 uniden-uh013-users-manual-360148 uniden pdf

Open the PDF directly: View PDF PDF.
Page Count: 19

OWNER’S MANUAL
UNIDEN Model UH013
UHF CB Radio
Introduction 2
Features 2
Preventive Maintenance 2
Troubleshooting 2
Controls / Connectors 3
Indicators 4
Included with your UH013 5
Mounting Options 6
Operation 8
Setting the Squelch 8
Monitor 8
Selecting a Channel 9
Transmitting 9
Using Repeater Channels 9
Operating the UH013 in Duplex Mode 10
Scanning 10
Open Scan (OS) Mode 10
Group Scan (GS) Mode 11
Programming Scan Channels 11
Busy Channel Lockout 12
VOX Operation (optional VOX headset required) 12
Programming the Instant Priority Channel 12
Recalling the Instant Channel 12
CTCSS (Continuous Tone Coded Squelch System) 13
Wide Band Scanning 13
Searching 14
Scanning Stored Frequencies 14
Programming Scan Frequencies 14
Selective Calling
(Optional Selcall PCB Required)
15
Frequency & CTCSS Tone Lists 16
Warranty 17
UNIDEN Model UH013 UHF CB Radio
Contents
1
Preventive Maintenance: The following system checks should be made every six to twelve months:
Check the Standing Wave Ratio (SWR).
Inspect the tightness of all electrical connections.
Inspect the antenna coaxial cable for wear or breaks on the shielding.
Inspect the tightness of all screws and other mounting hardware.
The Uniden UH013 is designed to provide you with years of trouble free service. Its rugged components and
materials are capable of withstanding harsh environments.
We are certain that you will enjoy your UH013. Please read this Operating Manual carefully to ensure you gain
the optimum performance of the unit.
Features
Detachable Display Unit
Transmit & Receive FM 40CH (UHF-CB, TX Power 5w)
2 Levels Preset Squelch
Wide Band Scanner (400MHz - 512MHz) = WS Function
Band Search Function (4 Bands separately)
LCD Display with Backlight
Signal Strength Meter
RF Power Indicator
One touch Instant Channel recalling
Duplex Capability (from CH01 - CH08 per channel)
Group Scan and Priority Channel Watch
Open Scan
Busy Channel Lock-out
38 Built-in CTCSS codes
Volume Control with Power On/Off Switch
VOX (Voice Activated Function) optional VOX headset
required
9 Step VOX Mic sensitivity adjustment
Memory backup if power fails
Optional Tone Squelch Unit Function
Tone Squelch Function (5/6 Tone) optional
Tone Calling Function (5/6 Tone) optional
Tone Squelch Scan optional
2
Introduction
NOTE
Blackening may occur on the Liquid Crystal Display if the UH013 has been subjected to extreme high
temperature (above . This is not a fault. Normal LCD operation resumes when the temperature
stabilizes back to standard operating conditions (0 to 55°C).
60°C)
Troubleshooting: Should the unit malfunction or perform poorly, follow these procedures:
If the transceiver is completely inoperative: Check the power cord and fuse.
If there is trouble with receiving: Check the VOLUME control setting. Be sure the SQUELCH is adjusted
properly. Possibly the radio is over-squelched.
If there is trouble with transmitting: Check that the transmission line (coaxial cable) is securely connected
to the ANTENNA connector. Check that the antenna is fully extended for proper operation. Check that all
transmission line (coaxial cable) connections are secure and free of corrosion.
UNIDEN Model UH013 UHF CB Radio
UNIDEN Model UH013 UHF CB Radio
Controls / Connectors
3
UHF ANT.
EXT.SP.
DC 13.8V
6
4
5
910 11 12
1
2 3
8
15
13
14
Front
Rear
7
Liquid Crystal Display (LCD)
Rotary Channel Selector
On/Off Volume
Push to Talk (PTT) Button
Tone Call
Monitor Button
SLCT - Select Button
SRCH - Search Button
SCAN - Open or Group Scan
MEM - Memory Button
INST - Instant Set, Instant Channel
Recall and Instant Channel
Programming
SQT - Squelch Mode
External Speaker Jack
Power Input (13.8V DC)
UHF Antenna Connection
Controls and Connectors
1
2
3
4
5
6
Ref. Item Page Ref. Item Page
7
8
10
11
12
11
12
13
-
-
-
13
14
15
9
4
9
8
9
15
8
14
10, 11
12, 13
Rotary
Channel
Selector
CAL TSQ DUP
MON SCN GS BCL INS
SRC HLD SQT M
VOX
CTCSS
S/RF
TX WS
MHz
SLCT
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLT
SLT VOL
UNIDEN Model UH013 UHF CB Radio
Indicators
4
SCN - Scan
SLT - Select
SRC - Search
HLD - Hold
BCL - Busy Channel Lockout
SQT - Squelch Tight
M - Memory
- Channel Number
- CTCSS Code
S/RF - RF Signal Strength
VOX - Voice Operated Microphone
CTCSS - Continuous Tone Coded
Squelch System
INS - Instant Channel
DUP - Duplex
TSQ - Tone Squelch (Optional)
CAL - Tone Call (Optional)
WS - Wide Band Scanner
TX - Transmit
GS - Group Scan
MON - Monitor
Indicators
16
17
18
19
20
21
26
27
28
29
30
Ref. Item Page Ref. Item Page
22
23
24
31
32
33
34
12
13
12
9 - 10
9
15
10
9
14
14
12
8
14
-
9
13
11
18
19
22
24
25
26
29 31
27 28 32 33
16
17
23
CAL TSQ DUP
MON SCN GS BCL INS
VOX
CTCSS
S/RF
TX WS
MHz
21 20
34 35
30
25 35
SLT SRC HLD SQT M
-
-
8
5
UH013 Owners Manual
OWNER’S MANUAL
UNIDEN Model UH0
13
UHF
CB Radio
Microphone Hanger, Screws
and Washers
DC Power Cord with Fuse
Display Mount Bracket
Display Unit
Microphone
Consumer Support Card
Uniden Australia Pty Limited
Attn: Service Division
345 Princes Highway
Rockdale NSW 2216
AUSTRALIA
AFFIX
STAMP
HERE
Mounting Bracket, Knobs,
Washer Stars and Screws
Transceiver
Display Rear Bracket Extension Cable
VOL
SRCH
TSQ
SCAN
OS/GS
MEM
INST
SET/SKIP
DUP
CTCSS
SLCT
STORE
UH013
SQT
UNIDEN Model UH013 UHF CB Radio
Included with your UH013
UNIDEN Model UH013 UHF CB Radio
Mounting Options
Mounting the complete radio (Transceiver with Display Unit)
Remote mounting of the Transceiver Unit
6
The radio can be mounted complete - or - with the Display Unit remote of the Transceiver.
a) Plug in display cable from the
Display Unit to the transceiver.
b) Hinge the Display Unit into the
transceiver as shown in the
diagram, then snap closed.
c) Should you wish, at a later stage,
to position the Display Unit remote
from the Transceiver, release the
Display Unit by pushing up the slide
on the side.
If the Display Unit is not already separate
of the Transceiver then remove it as
detailed in c) above.
Fix the Transceiver Mounting Bracket in
an appropriate location (screws and
washers supplied). Then fix the
Transceiver in the bracket using the Knob
bolts supplied d).
The bracket can be fixed on the top or
under the transceiver. An arced slot e)
allows you to mount the transceiver at an
angle.
b
b
c
de
a
Fixing the Display Rear Bracket
To mount the Display Unit it needs to
be fitted with a Display Rear Bracket
(included in package).
a) Position the Display Rear Bracket
so that one end fits over the two
studs at the end of the Display
Unit.
b) Push it into place until the fixing
screw hole is aligned with its
threaded counterpart.
c) Secure the Display Rear Bracket
with the screw provided.
Optional mounting positions
The Display Unit can be mounted from the top, back or bottom.
d) Fix the Display Mount Bracket in place (above, at the
rear or at the bottom) by screwing through the slots in
the bracket.
e) Fix the Display Unit to the bracket with the
thumb screws provided.
f) Connect the Extension Cable between the Display
Unit and the Transceiver.
d
Top fix
Back fix
Bottom fix
7
Remote mounting of the Display Unit
UNIDEN Model UH013 UHF CB Radio
Mounting Options
a
bc
VOL
SRCH
TSQ
SCAN
OS/GS
MEM
INST
SET/SKIP
DUP
CTCSS
SLCT
STORE
UH013
SQT
e
f
Turn the Unit ON by rotating the
volume control clockwise.
The UH013 has 2 Levels Preset
Squelch. It requires no adjustment.
However, if you are in a very high
noise area it may break through.
Press to select the tight squelch
mode. The SQT icon appears.
Setting the Squelch
Strong Signals
Medium Signals
Weak Signals
Noise
Think of the squelch control as a
gate. If the squelch is fully closed
no signal can get through.
Strong Signals
Medium Signals
Weak Signals
Noise
Strong Signals
Medium Signals
Weak Signals
Noise
If the squelch is fully open ‘Monitor
Mode’ it allows all signals to get
through - weak, medium and strong
signals and noise.
By setting the squelch to ‘threshold’,
it blocks out all weak signals and
noise and allows only the required
medium and stronger signals to pass
through.
Strong noise may still break through.
Press to select the ‘Tight
Squelch’ mode. The SQT icon
appears.
UNIDEN Model UH013 UHF CB Radio
8
Press the MONI button on the microphone to open the squelch and receive all
weak signals. Press and hold the MONI button for 2 seconds to hold the squelch
open (Monitor Mode). Press MONI again momentarily to cancel.
Monitor MONI
Rotary
Channel
Selector
Selecting tight squelch mode may prevent the
reception of weak signals.
NOTE
VOL
S/RF
SLCT
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
Operation
SQT
MHz
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SQT
The Signal coming from your radio is received by the Repeater Station and then retransmitted at the same time
on another channel. This operation is called "Duplexing".
For example,
CH01 on Duplex Mode will Receive on CH 01 but Transmit on CH31
CH02 on Duplex Mode will Receive on CH 02 but Transmit on CH32 etc ....
If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, the repeater station down-converts
your signal and retransmits on CH01.
UNIDEN Model UH013 UHF CB Radio
Operation
9
Turn the Rotary Channel Selector to select the
desired channel.
Selecting a Channel
Using Repeater Channels
UHF CB Repeaters are used to retransmit or relay your signal. Repeaters will extend the range of your radio and
overcome the shielding effect caused by solid obstructions. In normal Simplex operation, your radio transmits on
one particular frequency and receives on that same frequency. If there is a barrier that partially blocks your
transmitted signal, the probability of another radio receiving the signal is very slim. Hills, tall buildings, metallic
structures, ... etc. tend to act as a screen between radios.
Operation with the aid of
Repeater Station (Duplex)
Standard Operation without
the aid of a Repeater Station
Repeater Station
CH 31 CH 01
No Signal
being Received
Normal Simplex Operation
Transmitting on CH 31
CTCSS
INST SQT
Rotary
Channel
Selector
Transmitting
Select the desired channel. Press the Microphone’s PTT button and speak normally
into the microphone. Hold it approx. 7cm from your mouth. Release the PTT button
to end the transmission and listen for a reply.
PTT
SLCT SCAN MEM
SRCH
STORE DUP
OS/GS
TSQ
S/RF
SET/SKIP
MHz
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
UNIDEN Model UH013 UHF CB Radio
Operation
Press and hold for 2 seconds to switch
Duplex ON. The DUP icon appears.
If Duplex is not required - press and hold for
2 seconds again to switch Duplex off.
Only channels 01 - 08 are available for Duplex
10
NOTE
Check with your local Retailer for
information on available Repeaters.
Scanning
The UH013 has a scanning feature that allows you to search for active channels automatically.
Furthermore, the UH013 is designed to have two types of scanning; Open Scanning (OS) and Group Scanning
(GS), to give you flexibility and allow you to use the radio more effectively.
Press and Scanning starts. The SCN
icon appears.
Press again to stop scanning.
SCAN
Open Scan (OS) Mode
Allows continuous scanning of channels stored in the Open Scan memory. If an active channel is found, scanning
will stop on that channel.
This example shows CH40 active.
If the received signal ceases, the unit will wait 3 seconds for the signal
to return, otherwise scanning resumes.
To skip the active channel, press momentarily. Scanning resumes. To deactivate SCAN, press
or the PTT button on the microphone.
MEM
VOX
CTCSS
NOTE
If SCAN is deactivated while on an
active channel, the UH013 will stay on
that active channel. If no channels are
active, the UH013 will reinstate the
starting channel.
NOTE
OS Mode is indicated by the absence of
the GS icon.
VOL
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
S/RF
S/RF
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
S/RF
MHz
MHz
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
Operating the UH013 in Duplex Mode
For this example we are adopting CH01 as the channel being used in your area for repeater use.
DUP
DUP
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
MHz
SCAN
SCAN
To deactivate SCAN, press the button
or the PTT button.
Press and hold for 2 seconds to turn
off Group Scan Mode.
UNIDEN Model UH013 UHF CB Radio
Operation
11
If the Priority Channel becomes active the radio will stay on that channel for as long as the signal is present. If
the received signal ceases, Priority Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, UH013 will continue monitoring the Priority Channel
for activity while listening to the active one.
Group Scan (GS) Mode
Allows you to monitor a Priority (Instant) Channel while scanning (Instant Priority channel see p.12)
To use GS Mode Scanning, press and hold for 2 seconds.
GS icon appears on the display.
GS Scanning checks the Instant Priority Channel for activity regularly.
VOX
CTCSS
Programming Scan Channels
Select which Scanning Mode you wish to use
- OS or GS.
Select the channel you want to store.
Press to store. M icon appears and
a short tone beep is heard.
To remove the channel from Memory, press
once more. The M icon disappears.
MEM
MEM
S/RF
Rotary
Channel
Selector
SCAN
NOTE
OS is indicated by the absence of
the GS icon.
SCAN
NOTE
If SCAN is deactivated while it is tuned to an active channel, the UH013 will stay on that active
channel. If none of the channels are active, the UH013 will reinstate the Starting Channel.
If SCAN is deactivated while it is turned to the Instant Priority Channel, the UH013 will remain on
the Instant Priority Channel.
If GS Scanning is initiated when there are no channels programmed in GS memory, an error tone
will be heard and scanning will not start (see Programming Scan Channels - below).
NOTE
S/RF
SLCT
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
MHz
MHz
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SLCT
STORE
Rotary
Channel
Selector
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
S/RF
MHz
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SCAN
12
If the channel is already in use, you can prevent
the UH013 from transmitting . This is particularly
important when using CTCSS.
Press 2 times. Turn the Rotary Channel
Selector to display . Press and hold
for 2 seconds to store the new setting.
SLCT
SLCT
Busy Channel Lockout
If a button is not pressed within 10
seconds the UH013 will
automatically exit Select Mode.
NOTE
UNIDEN Model UH013 UHF CB Radio
Operation
Recalling the Instant Channel
Momentarily press the key at any time to return to the Instant Channel.
INST
S/RF
Rotary
Channel
Selector
Press 3 times. Turn the Rotary
Channel Selector to select the desired VOX
sensitivity (1 - 9).
Press and hold for 2 seconds to store
the new setting. Connect the VOX headset.
SLCT
SLCT
VOX Operation (optional VOX headset required)
Rotary
Channel
Selector
S/RF
Turn the Rotary Channel Selector to select the
Priority Channel you prefer.
Press and hold for 2 seconds to store
the new setting. INS icon appears.
Programming the Instant Priority Channel
INST
If a button is not pressed within 10
seconds the UH013 will
automatically exit Select Mode.
NOTE
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLCT
STORE
SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLCT
CAL TSQ DUP
MON SCN GS BCL INS
MHz
INST
VOX
SLT SRC HLD SQT M
Rotary
Channel
Selector
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SLCT
CAL TSQ DUP
MON SCN GS BCL INS
SLT SRC HLD SQT M
13
Turn the Rotary Channel Selector to the desired
channel to use CTCSS. Press and hold
for 2 seconds. CTCSS icon flashes.
Turn the Rotary Channel Selector to select the
desired CTCSS code 01 - 38. Press
once to store the new setting.
Rotary
Channel
Selector
Channels 05 and 35 are Emergency Channels
and channel 11 is a Calling Channel.
CTCSS cannot be selected on these channels.
NOTE
If a button is not pressed within 10
seconds the UH013 will automatically
exit Select Mode.
NOTE
SLCT
STORE
INST
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
CTCSS
SQT
MHz
SQT
SQT
Wide Band Scanning
The UH013 can also scan a wider band of frequencies (Step: 12.5 KHz).
Band Frequencies
A 400 MHz - 420 MHz
B 420 MHz - 450 MHz
C 450 MHz - 470 MHz
D 470 MHz - 512 MHz Transmission is not possible on wide band
frequencies.
NOTE
Rotary
Channel
Selector
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLT SRC HLD SQT M
CAL TSQ DUP
MON SCN GS BCL INS
SLCT
1. Press once.
2. Turn the Channel Selector to select .
3. Press and hold for 2 seconds to
store the new setting.
Searching of band A will immediately begin.
WS
SLCT
SLCT
CTCSS (Continuous Tone Coded Squelch System)
UNIDEN Model UH013 UHF CB Radio
Operation
14
UNIDEN Model UH013 UHF CB Radio
Operation
Searching
Searching checks every frequency within the Band. If an active channel is located the UH013 will stop on that
channel until 2 seconds after the transmission ends, then continue.
Search Hold
1. To stop the search, press at any time. HLD is displayed.
2. To continue, press again.
Skip
Changing the Search Band
While searching press and hold for 2 seconds. The UH013 will move to the next band.
Scanning Stored Frequencies
You may store up to 40 frequencies from any band into memory and then only scan those frequencies
for activity.
1. Select Wide Band Scanning (see page 13).
2. Press .
3. To stop the Scan, press at any time. HLD is displayed.
4. To continue, press again.
Programming Scan Frequencies
1. Select wide band scanning (see page 13).
2. Press and turn the Channel selector to choose a memory location (41 - 80).
3. Press to approach the desired frequency.
4. Turn the Channel Selector to stop searching and fine tune to the exact frequency.
5. Press to store the selected frequency.
SCAN
NOTE
MEM
SRCH
SCAN
SRCH
SRCH
SCAN
SCAN
SRCH
If a particular frequency continues to interrupt searching, you can set your radio to skip the frequency by pressing
the button during search hold (you may skip up to 10 frequencies). To cancel Skip, press again
while search holding at the desired frequency. To cancel all Skipped frequencies, press and hold
for 2 seconds during search hold.
Repeat procedure as necessary to programme the other memory locations.
INST INST
Rotary
Channel
Selector
CAL TSQ DUP
TX WS
SLCT
STORE
INST SQT
CTCSS
SET/SKIP
SCAN MEM
SRCH
DUP
OS/GS
TSQ
SLT
SLT
MHz
S/RF
MON SCN GS BCL INS
SRC HLD SQT M
VOL
Deleting stored frequencies
1. Select the desired memory location.
2. Press and hold for 2 seconds to delete the selected frequency.
INST
SCAN
15
Outline
Selective Calling (SELCALL) is a special Sequential Tone Squelch System that allows the user to receive/transmit
calls selectively from/to an individual or group, on a shared busy channel.
The UH013 has an Optional Selective Calling system.
Exceptional features, like Receiver Quieting, Tone Squelch Scanning, Tone and Group Calling make the UH013
superior to any transceivers in its class.
Receiver Quieting (Tone Squelch)
When activated, it automatically mutes the receiver audio circuit of the radio.
It will stay in this ‘Quiet’ mode as long as the SELCALL tone code (SELCALL ID) required to open the muting
circuit is not received.
Call Alarm
When a received code matches to your SELCALL ID, an alarm (CA Alert) will be emitted informing you that a
caller is on the channel.
Tone Squelch Scanning
Scans only tone squelched Channels.
Tone Calling
Allows you to selectively call another radio.
Group Calling Capability
Transmits and Responds to Group Calls.
UNIDEN Model UH013 UHF CB Radio
Selective Calling (Optional Selcall PCB Required)
UNIDEN Model UH013 UHF CB Radio
Frequency & CTCSS Tone Lists
16
NOTE: Channel 05 11 and 35 are not CTCSS programmable.
CTCSS TONE List
Tone
No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
23
OFF
67.0
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
Tone
Frequency (Hz) Tone
No. Tone
Frequency (Hz) Tone
No. Tone
Frequency (Hz)
00 (’oF’) 103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
162.2
167.9
173.8
179.9
186.2
192.8
203.5
210.7
218.1
225.7
233.6
241.8
250.3
CH No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
NOTE: Channel 05 and 35 are Emergency Channels and channel 11 is a Calling Channel.
21
22
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
23
476.925
476.950
476.975
477.000
477.025
477.050
477.075
477.100
477.125
477.150
477.175
477.200
477.225
477.250
477.275
477.300
477.325
477.350
477.375
477.400
476.425
476.450
476.475
476.500
476.525
476.550
476.575
476.600
476.625
476.650
476.675
476.700
476.725
476.750
476.775
476.800
476.825
476.850
476.875
476.900
CH No.
477.175 CH31
477.200 CH32
477.225 CH33
477.250 CH34
477.275 CH35
477.300 CH36
477.325 CH37
477.350 CH38
FM UHF - CB Frequency List - Australia & New Zealand
Simplex Mode
Transmit / Receive
Frequency (MHz)
Duplex Mode
Transmit
Frequency (MHz)
Simplex Mode
Transmit / Receive
Frequency (MHz)
ONE YEAR LIMITED WARRANTY
IMPORTANT: Evidence of the original purchase is required for warranty service.
WARRANTOR: Uniden New Zealand Limited. Uniden Australia Pty Ltd. ACN 001 865 498
ELEMENTS OF WARRANTY: Uniden warrants to the original retail owner for the duration of this
warranty its UH013 (hereinafter referred to as the Product), to be free from defects in materials
and craftsmanship with only the limitations or exclusions set out below.
WARRANTY DURATION: This warranty to the original retail owner only is only valid in the original
country of purchase and shall be of no further effect 12 months after the date of original retail
sale. This warranty will be deemed invalid if the Product is: (A) Damaged or not maintained as
reasonable and necessary, (B) Modified, altered or used as part of any conversion kits,
subassemblies, or any configurations not sold by Uniden, (C) Improperly installed, (D) Repaired
by someone other than an authorised Uniden Repair Agent for a defect or malfunction covered
by this warranty, (E) Used in conjunction with any equipment or parts or as a part of a system
not manufactured by Uniden. (F) Only available in the original country of sale.
PARTS COVERED: This warranty covers for one (1) year, the UH013 tranceiver only. All
accessories (Mounting bracket, Microphone etc.) are covered for 90 days only.
STATEMENT OF REMEDY: In the event that the Product does not conform to this warranty at
any time while this warranty is in effect, the warrantor, at its discretion, will repair the defect or
replace the Product and return it to you without charge for parts and service. THIS WARRANTY
DOES NOT COVER OR PROVIDE FOR THE REIMBURSEMENT OR PAYMENT OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES. THIS GUARANTEE IS IN ADDITION TO AND DOES NOT
IN ANY WAY AFFECT YOUR RIGHTS UNDER THE CONSUMER GUARANTEE ACT.
PROCEDURE FOR OBTAINING PERFORMANCE OF WARRANTY: in the event that the Product
does not conform to this warranty, the Product should be shipped or delivered, freight prepaid,
with evidence of original purchase (e.g. a copy of the sales docket) to the warrantor at:
UNIDEN Model UH013 UHF CB Radio
Warranty
17
UNIDEN AUSTRALIA PTY LIMITED
SERVICE DIVISION
345 Princes Highway,
Rockdale,
AUSTRALIA
Ph: (02) 9599-3100
Fax: (02) 9599-3278
Toll Free: 1300 36 895
UNIDEN NEW ZEALAND LIMITED
SERVICE DIVISION
150 Harris Road,
East Tamaki,
Auckland,
NEW ZEALAND
Ph: (09) 273 8383
Fax: 274 0009
Toll Free: 0800 486 4336
www.uniden.co.nz
NSW 2216,
www.uniden.com.au
C
2002 Uniden Australia Pty Limited / Uniden New Zealand Limited
Printed in the Philippines
PPC: UTZZ01887ZZ

Navigation menu