Uniform 680TG Contactless Smart Card Reader Module User Manual 0818

Download:
Mirror Download [FCC.gov]
Document ID	1527514
Application ID	SpktPWE3v6P0CvXu+AaXqQ==
Document Description	User manual-0818
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.29kB (66144 bits)
Date Submitted	2011-08-23 00:00:00
Date Available	2011-08-24 00:00:00
Creation Date	2011-08-18 16:01:05
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-08-18 16:01:05
Document Title	Microsoft Word - UIC680TG Simple Manual_Rev. 2_16.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	8546

UIC680 Simple Manual
2008-10-20
UIC680 SERIES
Contactless Smart Card Reader Module
- RS232 & USB HID Keyboard Interface (Support M-Chip & qVSDC)
Thank you for purchasing the UIC680 series products.
The contactless smart card reader module UIC680 is mainly to support the contactless payment systems. The
small footprint size of the module makes it easily to integrate to the current transaction system such as
Point-of-Sale terminal, kiosk, and vending machine station as the part of the system. The module
communicates with a host computer or terminal using a standard RS-232, USB or TTL interface.
FEATURES
Small footprint PCB size: 50 L* 40 W (mm) without antenna board
Supports ISO 14443 type A & B standard
Supports American Express速 ExpressPay, MasterCard速 PayPassTM, Visa速 MSD applications
Reads/writes Philips Mifare速 classical contactless smart card
Provides the options for the direct coupling antenna and the remote antenna
RS232, USB 2.0 and serial TTL (optional) Interface
RS232 data pass through function
TTL F2F magnetic stripe decode data pass through (optional)
F2F decoder data emulation (optional)
Firmware upgradeable
AGENCY APPROVAL
Specifications for FCC Class B, CE Class B
Pb
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for
compliance could void your authority to operate such equipment.
The external cover label must show "contains transmitter module FCC ID: TFJ680TG"
SPECIFICATIONS
Communication
Standard RS232 signal level
Compatible with USB 2.0 specification (optional)/TTL 5V signal level (optional)
Power Requirements
5VDC
Power Consumption
330mA in idle mode; 430mA in operating mode
Operating Temperature
-10 to 50
Operating Humidity
10 to 85% (non condensing)
Dimensions
50L x 40W mm, without antenna board
PM076-S Revision 2
Page 1 of 2
UIC680 Simple Manual
2008-10-20
PIN ASSIGNMENT
Interface J3 Pin Assignment
DB9
Signal
GND
RxD
TxD
Direction
PCB-J1
Signal
GND
 Serial data to host
TXD1
 Serial data from host
RXD1
VCC
Serial Pass-thru or USB data
TXD2 (or USB D-)
Serial Pass-thru or USB data
RxD2 (or USB D+)
Shield
Shield
Extension Port J1 Pin Assignment
Pin
Signal
Contact number
Signal
GND
RF output
GND
GND
Extended IO
Extended IO
GND
VCC
Extended IO
Extended IO
Extended IO
10
Extended IO
11
Extended IO
12
Extended IO
13
Extended IO
14
Extended IO
15
Extended IO
16
Extended IO
17
Extended IO
18
Extended IO
19
GND
20
VCC_33
21
Extended IO
22
Extended IO
23
Extended IO
24
Buzzer Control Signal
25
Extended IO
26
Extended IO
27
Extended IO
28
Extended IO
PM076-S Revision 2
Comment
50 RF Antenna Port J2B Pin Assignment
Direct Match Antenna Port J2A Pin Assignment
5Vdc
Contact number
Signal
RX
TX
GND
GND
3.3V
Page 2 of 2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2011:08:18 16:01:05+08:00
Modify Date                     : 2011:08:18 16:01:05+08:00
Metadata Date                   : 2011:08:18 16:01:01+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:A68C49DE6EC9E011A8D5D05EBEF3D9BB
Instance ID                     : uuid:6043655d-fc61-4535-91f2-ab83f95b8432
Derived From                    : 
Format                          : application/postscript
Creator                         : 8546
Title                           : Microsoft Word - UIC680TG Simple Manual_Rev. 2_16.doc
Page Count                      : 2
Author                          : 8546

EXIF Metadata provided by EXIF.tools