Unimo Technology PX-100NW FM TRANSCEIVER User Manual PX 100NW Manual

Download:
Mirror Download [FCC.gov]
Document ID	929388
Application ID	knRCAaRuvMd4TSyaLnkbpw==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.81kB (260089 bits)
Date Submitted	2008-04-17 00:00:00
Date Available	2008-04-18 00:00:00
Creation Date	2008-04-14 18:21:34
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-04-14 18:27:27
Document Title	Microsoft Word - [PX-100NW] Manual.doc
Document Creator	PScript5.dll Version 5.2

PX- Series Portable Radio
Service Manual
UNIMO Technology Co., Ltd.
* This Service Manual is subject to be changed without notice for performance improvement
of PX-Series Radio.
* Version #1 (February 18, 2008)
====
Table of Contents
====
1. Features of PX-Series Radio
2. Basic Operations of PX-Series Radio
3. Appearance & Components of PX-Series Radio
4. How to charge the Battery
5. Operating Instructions of PX-Series Radio
1. Features of PX-Series Radio
PX-Series is designed to have 16 channels selectable switch, which allows users to select
their desired channels with ease and PK-Series can be used at the industrial fields and public
places for the safety & convenience of users. Also, for powerful sound and for better
performance of conversation distance & sound quality, PX-Series has the built-in speaker in
the large diameter of Ø40.
PX-Series has the following various functions.
● PLL Synthesizer Type
● 16 channels are selectable.
● Call Guard Squelch of standardized 53 CTCSS / 104 DCS Tones.
● Scramble function of Frequency Inverter Type
● Compander function
● Dual Tone Modulation Frequency (DTMF)
● Selectable Channel Spacing (12.5kHz / 25KHz)
● Normal Scanning and Priority Scanning
● Time-Out Timer (TOT)
● 2-Tone Paging
● BCL (Busy Channel Lock) / BCLO (Busy Channel Lock Out)
● High/Low Power Switching
● 10 Step Squelch Control Using RSSI (0~9)
● Remote Radio Stun/Revive (Use 5 Tone)
● Monitor
● VOX
● Easy Cloning
● USB PC Programming
● PC Tuning
● Advanced Speaker Protection Technology
● Powerful & Clear Sound by Ø45 Speaker (1Watt)
1.1 Part Number Breakdown of PX-Series
To identify PX-Series, please refer to the following Part Number Breakdown.
X – 100
Portable Radio
25KHz
Version NO
12.5KHz
Frequency Band
Frequency Range / Power Output / Channel Spacing per Model
Model NO.
Frequency Range
RF Power
Channel Spacing
PX-100NW
136~174MHz
5/2 Watt
12.5/25KHz
PX-400NW(A)
400~440MHz
PX-400NW(B)
430~470MHz
4/2 Watt
12.5/25KHz
PX-400NW(C)
470~512MHz
2. Basic Operations of PX-Series Radio
2.1 ON/OFF Volume Switch
Turn the knob of Volume Switch clockwise to turn the Radio on and if turning the Switch to the
opposite direction, the Radio is turned off. The audio volume level can be adjusted by turning
the Volume Switch and when adjusting the volume, please refer to the index mark indicated
nearby the Volume knob.
2.2 Channel Switch
16 channels (CH 1 to CH 16) can be selected.
2.3 Status Indication LED
User can check the current status of PX-Series Radio by the color of LED and the status
indication will be as follows.
① When the transmission status is normal, the red LED will be on.
② When the reception status is normal, the green LED will be on.
③ When the data of CTCSS or DCS code is not being received due to mismatch,
the green LED blinks.
④ In case of Low battery, the red LED blinks and an alert sound is heard.
2.4 Speaker Mic. Jack
When using external speaker microphone and when making PC programming/Cloning/Tuning,
the Jack is used and is designed to be compatible with Motorola external speaker microphone
for more efficient use of PX-Series Radio.
2.5 Speaker
For dynamic sound quality and better sound, PX-Series is designed with Ø45 speaker
built-
in.
2.6 Emergency Key
If you press the Emergency Key in an emergency situation, an emergency siren sound will be
heard through the speaker in the Radio and the Radio will transmit an emergency signal to the
party through the emergency channel.
2.7 PTT Button
If pressing the PTT button, the status indication LED lights in red color and the Radio is
converted to transmission mode. If releasing the PTT button, the Radio is converted to
reception mode or standby mode. It is recommended to talk about 5~7cm away from the
microphone for using in better sound quality and for better voice communication.
Also, by using PTT button and other button, it is possible to set up the RF Power.
① PTT button + Menu button : The Radio is converted to High Power(5W) and the status
indication LED lights in red color.
② PTT button + Monitor button : The Radio is converted to Low Power(2W) and the status
indication LED lights in orange color.
2.8 Menu Button (Scan Button)
If pressing Menu button for about 2 seconds, the Scan operation is proceeded and by
pressing the Menu button again, the Scan operation is released.
2.9 Monitor Button
If pressing the Monitor button, the receiving status of the current channel can be checked.
Normal Mode : During pressing the Monitor button for about 2 seconds, it is possible to check
the receiving status.
Continuous Mode : During pressing the Monitor button for more than 2 seconds, a beep tone
is heard along with a noise and the monitor function is continuously maintained. If pressing
the Monitor button again, the monitor function will be released.
3. Appearance & Components of PX-Series Radio
3.1 Appearance of PX-Series Radio
Figure 3-1) Appearance of PX-Series Radio
Figure 3-2) Top Appearance of PX-Series Radio
3.2 Basic Operation Method
Please read this user guide carefully before using this PX-Series Radio.
This user guide contains the detailed explanation about the installation & removal
method of antenna and battery.
1) Installation and Removal of Antenna
The Figure 3-10 shows the installation and removal method of antenna. Turn the
antenna clockwise for installation of antenna and in order to remove the antenna from
Radio, turn the antenna counterclockwise.
▶ Caution: When installation of the antenna, giving a strong pressure to the Radio or
pulling the antenna from Radio with a strong power can make damage on
the antenna connector, which may cause the Radio to have critical problem.
Figure 3-3) Installation & Removal method of Antenna
2) Installation and Removal of Battery
The Figure 3-1 shows how to remove battery. The material of Radio body on which the
battery is installed is aluminium. If pushing the battery softly after alignment (③) of
battery on the Radio body in aluminium material, the battery is installed with a similar
sound to camera shutter.
In order to remove the battery from the Radio, move downwards (①) the locker on
the top side of battery and pull (②) the battery pack at the same time.
Figure 3-4) Installation & Removal method of Battery
3) How to Disassemble Radio
Unscrew 2 screws at the back side of Radio as shown on Figure 3-3 and by using a jig,
pull the jig to the (O) direction and give the jig a lift to the (X) direction.
Then, the case is disassembled from the Radio.
Figure 3-5) Disassembly Method of PX-Series Radio
4) Components of PX-Series Radio
PX-Series Radio
CHX-150FB
PBX-2150LB
User Guide
Hand-Strap
Antenna
4. How to charge the Battery
4.1 How to charge the Battery
PX-Series Radio is designed to use 2 kinds of batteries, which are PBX-2150LA (1500mAH
Li-ion) of standard.
The PX-Series Radio receives power from high-performance Li-ion battery. The battery is
safe, of high-performance and highly reliable. Using the enclosed standard charger makes it
possible to get sufficient efficiency and lifetime of the battery.
▶ Caution: Charging of the UNIMO battery on the other manufacturer’s charger can cause
unexpected damage of the battery and the Radio.
10
4.2 When to charge Battery
Low battery voltage will shorten the talk range and will make the performance of Radio worse.
Please make charge in case of followings.
1) When the battery has low performance after being used for 10~12hours
2) When the red LED on the front of Radio blinks (every 0.5 second) during transmitting or
receiving signal
3) When a “beep“ sound (alert sound indicating low battery) is generated while the Radio
is in use
4.2.1 How to check the remaining capacity of Battery
If pressing the Menu + Monitor buttons at normal mode, user can check the remaining
capacity of battery.
Battery Capacity Status
LED Indication Status
At Full Capacity
Green
At 1/2 Capacity
Yellow
At 1/5 Capacity
Red
Remarks
4.3 How to Charge
1) Plug the charger (CHX-150FB) into the electricity power outlet for AC220V.
2) When charging the Radio with the battery installed, insert the Radio into
the charger slot after power off.
3) The charger (CHX-150FB) has one slot.
4) Although the green LED is on after full charge, please continue the charging
for 30 more minutes for the complete full charge.
Status
LED Indication
During charging
Red LED is ON.
After complete
charging
Green LED is ON.
Status
When Error
monitoring
During maintaining
charge
11
LED Indication
Red LED blinks.
Green LED is ON.
4.4 Charger (CHX-150FB)
The CHX-150FB charger is designed to charge only the Li-ion battery enclosed in this Radio.
It is possible to use the AC input voltage of AC85~250V.
Figure 3-3) Charger (CHX-150FB)
Specifications of CHX-150FB Charger
• Input Voltage
: AC85 ~ 250V
• Available Battery
: PBX-2150LA or PBX-2180LA
• Fast Charging Time
: In 3 and half hours
• Operating Temperature
: 0℃~+50℃
• Dimensions
: 105(W)x105(D)x37(H)m/m
• Charging Current
: 850mA(Fast Charging)
12
5. Operating Instructions of PX-Series Radio
5.1 Power On/Off
Turn Power switch clockwise and as soon as power is supplied, a “beep” sound is heard or
the “Star Spangled Banner” is played and the Radio enters into the previous latest state.
☞ Caution : If turning power on by pressing a button on Radio, the Radio may enter into a
special mode and in this case, the transmission and reception of Radio may not be possible.
Don’t use the Radio for the other purpose apart from the above.
5.2 Transmission Method
If pressing the PTT button on the left side of Radio for transmission, the DTMF is transmitted
according to the setting as soon as the PTT button is pressed or a “beep” sound is heard at
Dual PTT Mode. During this time, voice communication will not be made and after that, the red
LED (High Power) or yellow LED (Low Power) for transmission and reception is turned on and
voice is transmitted. For voice communication in the best sound quality, it is recommended to
talk 5~10cm away from the Radio.
☞ Note: If transmitting consecutively for more than a certain time when setting of BCLO
function and TOT function, the transmission can be forcibly interrupted for other
users.
5.3 Reception Method
User can adjust the volume by using volume switch and during normal reception, the green
LED is turned on. If frequency is same but Radio is not in a normal reception state, the green
LED blinks. In order to check if the current channel is in use, press the Monitor button (M) on
the left side of Radio. If pressing the Monitor button (M) for about 2 seconds, the monitor
function is activated with a “beep” sound. To release from the monitor function, press the
monitor button shortly.
5.4 Changing Channels
Channel Rotary Switch is used for changing channels. On the side of Channel Switch, channel
numbers is stipulated and whenever changing channels, the Radio generates the different
channel sounds every each channel. If the channel switch is located at a channel
with no
frequency on it, an alert sound is heard continuously and in this case, no transmission and
reception is made.
13
5.5 Adjusting Transmission Power
The transmission power can be changed to High-Power or Low-Power. If pressing the MENU
(SCAN) key during pressing the PTT Key, the red LED (High-Power) is turned on and if
pressing the MON key, the yellow LED (Low-Power) is turned on. By changing the power to
Low power under a good communication condition, the user can extend the use time of
battery.
5.6 Operation of Scan Function
By pressing the "Menu (Scan)" button for more than 2 seconds in Standby mode, the Scan
function is executed with a “beep” sound. To deactivate the Scan function, press the
"Menu (Scan)" button once shortly or turn off and on the power.
1) Normal Scan
When the scan list is S1, S2, S3 at the normal scan mode, the Radio proceeds the channel
scan in the sequence of S1, S2, S3, S1, S2, S3.... The user can delete (by pressing the EMR
key) the current receiving channel temporarily from the scan list and at that time, user can
move to the next channel. If getting out of Scan Mode or if turning on power again, the list
deleted temporarily is returned back to the original.
2) Priority Scan
If the Priority Scan Channel is set up, the Radio proceeds the channel scan in the sequence of
P, S1, P, S2, P, S3.... During receiving signal through common channel, the Radio scans the
priority channel periodically and if the Radio detects the priority channel, it starts receiving the
priority channel. The user can delete (by pressing the EMR key) the current receiving channel
temporarily from the scan list and at that time, user can move to the next channel. However,
the priority channel will not be deleted..
When transmitting during scan operation, the Radio makes transmission through the channel
which is set up by Pc-Programmer.
-. Home
: Transmit through the channel which is set up.
-. Last Receive
: Transmit through the latest channel which is finally received.
-. Current Scan
: Transmit through the channel which is scanning.
-. The operation is not possible in Dual PTT Mode.
5.7 VOX Function
The VOX function is set up by Pc-Programmer and without pressing the PTT key,
the voice signal is transmitted through microphone.
14
5.8 Compander Function
This function is for improving the quality of voice. When transmitting, it transmits
compressed voice and when receiving, it expands the compressed voice, which is
for improvement of communication quality.
* Selection Method of Compander
If turning on power during the PTT + MENU (Scan) key, the conversion sound of Compander
Mode is generated and from that time, the Compander function operates. Although the
power is turned off and on, the Compander function is maintained.
To release from the Compander function, turn on power during pressing the
PTT + MENU (Scan) key once again.
Indication Method : If the Compander function is already set up when turning on power, the
green LED is turned on with a sound and after the sound, the green LED
is turned off. (If the Scramble function is also set up, the yellow LED
lights with a sound and after the sound, the yellow LED is turned off.)
5.9 Cloning Function
The Cloning function is to copy the data such as Frequency/Tone/Scan into other Radio.
* Cloning Method
1) First, prepare the Cloning cable (PECLONA) for PX-Series Radio.
2) The original Radio should be turned on with pressing the PTT button and the Radio to
be copied should be in the Standby mode for receiving.
3) The yellow LED of original Radio is turned on.
4) Connect the Cloning cable to the Ear/Mic. Jacks of 2 Radios.
5) If pressing the “Menu(Scan)" button of the original Radio, the copy is executed and
after completing the copy, the green LED of original Radio lights and if the copy is
failed, the red LED is turned on.
6) After removing the Cloning cable, turn off and on the power of 2 Radios.
Finally please use the Radio after checking if the copy is succeeded without problem.
☞Caution : If the Cloning is made into other maker’s Radio, a critical malfunction can
happen.
15
5.10 Indication Function of Batter Voltage
In order to check the remaining battery capacity, press the MENU (Scan) + MON key
successively at Normal Mode. Then, the LEDs show the followings for 1 second and return
back to the original.
-. Green LED is turned on.
satisfaction
-. Yellow LED is turned on.
sufficiency
-. Red LED is turned on.
Shortage
-. Red LED blinks with an alert sound.
Turn-off
5.11 Stun / Revive Function
By using this function, it is possible to stun and revive the Radio with Stun ID from the control
center which is far apart from the Radio. If Radio receives a Stun ID from the other Radio, the
Radio with the Stun ID received lights the green LED and the red LED in turn.
In this state, no key operates. (However, if pressing the PTT key, an alert sound
is generated.)
And although the power is turned off and on, this function is maintained.
If Radio receives Revive ID from the other Radio, the Radio returns back to the original
with a ”beep” sound.
5.12 Dual PTT (Home Channel) Function
If pressing the EMR + PTT key successively, the Radio generates a “beep” sound and makes
the conversion to the channel designated by PC Program. If Dual PTT function is set up, the
function and channel sound of the current channel selection switch are deleted and the Radio
is operated by the Dual PTT only.
In order to release from the function, press the EMR + PTT key once again, or turn off and on
the power.
-.
This function is not operated at the Scan Mode.
5.13 Emergency Call Function
If pressing the EMR key, emergency alert sound is heard and the Radio sends the emergency
call to the current channel or Home-Channel.
If the Radio is set up in repeat mode, the emergency call sound is heard periodically.
-. This function is not operated at the Scan Mode.
16
5.14 Scramble / Descramble Function
This function is used to protect the PX-Series Radio from overhearing of the other Radio
which is using the same frequency.
If turning on the power during pressing the MENU (Scan) + MON key, the conversion sound
to Scramble Mode is generated and at this time, Scramble Function is operated.
And although the power is turned off and on, this function is maintained.
In order to release from the Scramble function, press the MENU (Scan) + MON key once
again and turn on the power.
Indication Method : If the Scramble function is already set up when turning on power, the red
LED is turned on with a sound and after the sound, the red LED is turned
off. (If the Compander function is also set up, the yellow LED lights with a
sound and after the sound, the yellow LED is turned off.)
5.15 Monitor Function
In order to open the squelch compulsorily, press the MON key. If pressing the MON key for
more than 2 seconds, the squelch is opened continuously with a “beep” sound. If you want to
get out of this mode, press the MON key shortly once again, or turn off and on the power.
5.16 BCL/BCLO Function
This function is used not to interrupt the other users who are using the same frequency and by
pressing the PTT key, an alert sound is generated.
BCL(Busy Channel Lock) : Limits transmission in case of same frequency.
BCLO(Busy Channel Lock Override) : Limits transmission in case of different sub-tone.
5.17 TOT Function
This function is used to prevent from using one channel continuously for a long time. If user
exceeds the transmission time which is set by Pc-Programmer, the transmission is stopped
and an alert sound is generated. If a Penalty time is set up, the Radio makes transmission
normally after the penalty time.
5.18 2 Tone Function
In case of 2 Tone channel, the Radio reads the received 2 Tone and if the 2 Tone corresponds
with that of my Radio, the Radio receives the corresponding 2 Tone normally. (In case of No
Tone or the corresponding Sub-tone)
17
5.19 CTCSS Frequency Table
No.
Frequency
No.
Frequency
. No
Frequency
No
Frequency
67.0
15
110.9
29
179.9
43
196.6
71.9
16
114.8
30
186.2
44
199.5
74.4
17
118.8
31
192.8
45
206.5
77.0
18
123.0
32
203.5
46
229.1
79.7
19
127.3
33
210.7
47
254.1
82.5
20
131.8
34
218.1
48
165.5
85.4
21
136.5
35
225.7
49
171.3
88.5
22
141.3
36
233.6
50
177.3
91.5
23
146.2
37
241.8
51
60.7
10
94.8
24
151.4
38
250.3
52
62.5
11
97.4
25
156.7
39
69.3
53
64.7
12
100.0
26
162.2
40
159.8
13
103.5
27
167.9
41
183.5
14
107.2
28
173.8
42
189.9
18
5.20 DCS Tone Table
No.
DCS Code
No.
DCS Code
No.
DCS Code
023
27
165
53
413
79
731
025
28
172
54
423
80
732
026
29
174
55
431
81
734
031
30
205
56
432
82
743
032
31
223
57
445
83
754
043
32
226
58
464
84
036
047
33
243
59
465
85
053
051
34
244
60
466
86
122
054
35
245
61
503
87
122
10
065
36
251
62
506
88
212
11
071
37
261
63
516
89
225
12
072
38
263
64
532
90
246
13
073
39
265
65
546
91
252
14
074
40
271
66
565
92
255
15
114
41
306
67
606
93
266
16
115
42
311
68
612
94
274
17
116
43
315
69
624
95
325
18
125
44
331
70
627
96
332
19
131
45
343
71
631
97
356
20
132
46
346
72
632
98
446
21
134
47
351
73
654
99
452
22
143
48
364
74
662
100
454
23
152
49
365
75
664
101
455
24
155
50
371
76
703
102
462
25
156
51
411
77
712
103
523
26
162
52
412
78
723
104
526
19
Acknowledging Special Precautions and the FCC Notice Cautions.
Modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
FCC compliance Information
This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions: 1. This device may not cause
harmful interference, and 2. This device must accept any interference received.
Including interference that may cause undesired operation.
Information to User
This equipment has been tested and found to comply with the limits for a Class B
digital device, Pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio Frequency energy and, if not
installed and used in accordance with th einstruction, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, whic h can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
> Reorient or relocate the receiving antenna.
> Increase the separation between the equipment and receiver
> Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
20
RADIO FREQUENCY ENERGY SAFETY INFORMATION
This UNIMO transceiver has been tested and complies with the standards listed below, in
regards to radio Frequency(RF) energy electromagnetic energy(EME) generated by the
transceiver
FCC RF exposure limits for Occupational use only. RF exposure limits adopted by the FCC
are generally based on recommendations from the national council on radiation protection and
measurement, & the American National National Standards Institute.
> FCC OET Bulletin 65 Edition 97-01 Supplement C
> American National Standards Institute(C95.1-1992)
> American National Standards Institute(C95.3-1992)
WARNING
This UNIMO transceiver generates RF EME while transmitting. RF EME(Radio Frequency
Electric & Magnetic Energy)has the potential to cause slight thermal, or heating effects to any
part of your body less than the recommended distance from this radio transmitter's antenna.
RF energy exposure is determined primarily by the distance to and the power of the
transmitting device. In general, RF exposure is minimized when the lowest possible power is
used or transmission time is kept to the minimum required for consistent communications, and
the greatest distance possible from the antenna to the body is maintain.
The transceiver has been designed for and is classified for Occupational use only.
Occupational/controlled exposure limits are applicable to situations in which persons are
exposed to RF energy as a consequence of their employment, and such persons have been
made aware of the potential for exposure and can exercise control over their exposure.
This means you can use the transceiver only if you are aware of the hazards of operating a
transceiver and are familiar in ways to minimize these hazards. This transceiver is not intended
for use by the general public in uncontrolled environments.
Uncontrolled environment exposure limits are applicable to situations in which the general
public may be exposed to RF energy ,or in which the persons who are exposed as a
consequence of their employment may not be fully aware of the potential for exposure or
cannot exercise control over their exposure
The following list provides you with the information required to ensure that you are aware of RF
exposure and of how to operate this transceiver so that the FCC RF exposure limitations are
not exceeded.
> While transmitting(holding the PTT switch), always keep the antenna at least 2.5cm (1
inches) from your body or face ,as well as from any bystanders
21
> Do not transmit for more than 50% of the total transceiver use time; transmitting over 50%
of the total use time may exceed the limits in accordance to the FCC RF exposure
requirements. Nominal transceiver operation is 5% transmission time,5% reception time, and
90% stand-by time
> Use only the specified antenna for this transceiver; this may be either the antenna provided
with the transceiver or another antenna authorized by UNIMO.
Use only UNIMO authorized accessories (antennas, battery packs, belt clips, Speaker/Mics or
headsets etc.):
When worn on the body, always place the radio in a UNIMO recommended clip or carrying
case meant for this product. The use of other than recommended or approved body-worn
accessories may result in RF exposure levels which exceed
the FCC's occupational
/controlled environment RF exposure limits.
CAUTION
To ensure that your exposure to RF EME is within the FCC limits for occupational use, you
must observe and adhere to the above points.
Electromagnetic Interference Compatibility
Electronic devices are susceptible to electromagnetic interference(EMI)if they are not
adequately shielded or designed for electromagnetic compatibility. Because this transceiver
generates RF energy, it can cause interference to such equipment.
>Turn OFF your transceiver where signs are posted to do so. Hospitals and health care
facilities use equipment that is sensitive to electromagnetic radiation.
> Turn OFF your transceiver while on board an aircraft when so instructed, Use of the
transceiver must be in accordance with airline regulations and/or crew instructions.
22

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:04:14 18:27:27+09:00
Create Date                     : 2008:04:14 18:21:34+09:00
Metadata Date                   : 2008:04:14 18:27:27+09:00
Format                          : application/pdf
Title                           : Microsoft Word - [PX-100NW] Manual.doc
Creator                         : 
Document ID                     : uuid:ee52a647-9838-4673-82df-c609b57c9d07
Instance ID                     : uuid:722ad3c5-5200-45b9-8298-742dd24a1df8
Page Count                      : 22
Author                          : 

EXIF Metadata provided by EXIF.tools