unique electronic HS02 Barcode scanner User Manual Bluetooth barcode reader s

Shenzhen Unique Electronic International Limited Barcode scanner Bluetooth barcode reader s

User Manual

Bluetooth Barcode Reader HID Mode for IOS1FS02 user manualHID mode for IOS1. Turn on the barcode reader, and read below barcodes sequence, the blue LED willflash rapidly.2. Enable the bluetooth of IOS to pair with the barcode reader. After the pairing issuccessful, you can use it with Notes/office files or other cursor blinking position.(Please follow the steps below)
Bluetooth Barcode Reader HID Mode for IOS2（1）Turn on the ipad, and find the bluetooth option.（2）Enable bluetooth, and the ipad will search automatically. After the searching isfinished, click the scanner’s name to connect.
Bluetooth Barcode Reader HID Mode for IOS3（3）After the connection is successful, the blue LED on the scanner will be off. Thenyou can use it with Notes/office files or other cursor blinking position.Note: In android system, If the soft keyboard can not display, you need to switch thehardware physical keyboard to OFF status. In IOS system, you can also click triggerbutton for four times to hide and display soft keyboard for IOS.
Bluetooth Barcode Reader HID Mode for Windows4HID mode for Windows1. Turn on the barcode reader, and read below barcodes sequence, the blue LED willflash rapidly.2. Enable the bluetooth of Windows device to pair with the barcode reader. After thepairing is successful, the blue LED on the scanner will be off. Please follow the stepsbelow.
Bluetooth Barcode Reader HID Mode for Windows5（1）Find out the bluetooth option on the computer.(2) Enable the bluetooth, and the Windows device will search automatically. After thesearching is finished, click the scanner’s name to connect.
Bluetooth Barcode Reader HID Mode for Windows6（3）After the connection is successful, the blue LED on the scanner will be off. Thenyou can use it with Notes/office files or other cursor blinking position.
Bluetooth Barcode Reader SPP Mode for Windows7SPP mode for Windows1. Turn on the barcode reader, and read below barcodes sequence, the blue LED willflash slowly.2. Enable the bluetooth of Windows, and pair the barcode reader. The PIN number ofSPP mode is 1234.And now you need a software to help connection. Please download the test softwarefor Serial port from internet, then install the test software to your computer and run it.Please follow the steps below:
Bluetooth Barcode Reader SPP Mode for Windows8(1) Please double click to open the software, choose “Serial Port”, you need to findout the COM port first in the Device manager of computer, then select the COM portin the software, click “Open Device”.(2) Now the blue LED on the scanner will be off.
Bluetooth Barcode Reader SPP Mode for Windows9(3) After the connection is successful, you can scan barcode data into the dialog box .
Bluetooth Barcode Reader HID Mode for Android10HID mode for Android1.Turn on the barcode reader, and read below barcodes sequence, the blue LED willflash rapidly.Enable the bluetooth of Android device to pair with the barcode reader. Afterthe pairing is successful, the blue LED on the scanner will be off. Please follow thesteps below.
Bluetooth Barcode Reader HID Mode for Android11(1)Find the bluetooth icon in setting, shown in “The 1st” picture. Click to enter andenable bluetooth, and then the Android device will automatically search, shown in“The 2nd” picture.The 1st The 2nd(2)After the search is completed, click scanner’s name to connect, then “Bluetoothkeyboard connected” will display on the soft keyboard, and the blue LED on thescanner will be off, the connection is successful, shown in “The 3rd” picture. Now,you can use it with Notes/office files or other cursor blinking position, shown in “The4th” picture.The 3rd The 4th
Bluetooth Barcode Reader SPP Mode for Android12SPP mode for AndroidDue to some Android device can’t support Bluetooth HID protocol very well. It cannot connect bluetooth scanner with HID mode. In general, Android support SPPprotocol very well.1. Turn on the barcode reader, and read below barcodes sequence, the blue LED willflash slowly.2. Please download our BIM(Bluetooth Input Method) for android from our website,or get it from our sales, then install BIM to your smartphone and run it. And thenplease follow the wizard to connect barcode scanner to finish the connection. The PINnumber of SPP mode is 1234.After the connection is successful, the blue LED on the scanner will be off.
Bluetooth Barcode Reader Instuction for BIM13User manual for Bluetooth Input Method in Android device(1) Install BIM .apk into Android device, run and use it as below steps one by one,shown in “The 5th” picture.(2) Click “SCAN”, select “BIM” in the pop-up window, shown in “The 6th” picture.The 5th The 6th(3) Now you have two methods to connect scanner, please follow the steps below:Way 1: Scan the Mac address(QR code) on the scanner, shown in “The 7th”picture, after, you will see “Scan is successful, please connect the bluetooth”, click“Ok”, shown in “The 8th” picture.
Bluetooth Barcode Reader Instuction for BIM14The 7th The 8thWay 2: Click “Search” on the top right corner in “The 7th” picture, and clicksearch in pop-up window, shown in “The 9th” picture, choose the scanner’s name toconnect, shown as “The 10th” picture.The 9th The 10th
Bluetooth Barcode Reader Instuction for BIM15(4) Connection is successful, it will shown: “Activation successful”. shown in “The11th” picture, now you can scan the barcode to the text box or notepad, word...,shown in “The 12th” picture.Note: If it doesn’t connect automatically, click “BT” in “The 11th” picture, andclick “Connect”.The 11th The 12th(5) Shown as “The 13th” picture, click “Open”/ “Close” to turn on / off the virtualkeys, you can click on the white circle to scan barcode.
Bluetooth Barcode Reader Instuction for BIM16The 13th The 14th(6) You can configure the barcode reader via the “Function” in the picture “The 13th”,shown as “The 14th” picture.Click “Scanner Setting”, you can set bluetooth name/prefix Character/suffixcharacter/buzzer/output model and sleep time of the barcode reader, please check“The 15th” picture.The 15th The 16th(7) SPP Bluetooth Name: Please click “SPP Bluetooth Name”, and enter the requiredset of Bluetooth name in the pop-up window, then click “SUBMIT”, shown in “The16th” picture.(8) HID Bluetooth Name: The method is same as SPP Bluetooth Name.
Bluetooth Barcode Reader Instuction for BIM17The 17th The 18th(9) Prefix character: Please click “Prefix Character” option in “The 15th” picture, andclick”+” in the pop-up window, shown in “The 17th” and “The 18th” picture. Nowclick the text-box behind “CR”(CR is default setting of the product, please refer to theASCII). Shown in “The 19th” picture.The 19th The 20th(10) Choose the symbol required, and enable Prefix, shown in “The 20th” picture,then click “SUBMIT”, the setting is finished( the same method to set Suffix).(11) Now you can scan barcode, shown in “The 21th” picture.
Bluetooth Barcode Reader USB mode18The 21h The 22thNote: The default suffixes are CR and LF, please put your suffix in front of thedefault suffix.(12) Buzzer: Click “ Buzzer”, and choose the Volume required, shown in “The 22th”picture.Note: When you configure the barcode reader, please keep the scanner is active mode,the method is: click the scan button on the barcode reader every 2-3 seconds, butdon’t read any barcodes.USB mode:If you need to use a USB cable to connect the scanner, you need to set the outputmode to USB mode. Please scan the following two barcodes:
Bluetooth Barcode Reader USB mode190 0 0 0 1 1 1 5USB modeThis barcode scanner has five languages for your selection, and used in USB outputmode. You need to switch the computer input method to the same, please scan thebarcodes below.
Bluetooth Barcode Reader Offline mode20Offline mode:You can use offline upload functionality, barcode data stored in the scanner can beuploaded to your smartphone or computer via Bluetooth or USB.Concrete implementation steps:1. Scan “start offline state” and “Offline mode” barcodes as shown below to enter theoffline scanning. The data you scanned will be stored in the scanning device.10670111Offline mode2. The customer can connect to the computer through USB or Bluetooth interface ordata terminal to upload the data. If customers need to save the data stored in the file,open Note pad or similar software to enter the data. If the customer wants to store datain a custom application (such as submitted the barcode data into a application), referthe customer to the insertion point where you want to enter the data in the dialog box.Then barcode data entry and online scanning are in the same way. Customers canchoose different speed to upload the data according to your application. There arethree different speeds for you: fast speed, middle speed and slow speed upload.(1) Fast upload means upload data without time interval;(2) Middle speed is to upload data the interval of 1 second;(3) Slow upload refers to each interval of 3 seconds to upload the data.
Bluetooth Barcode Reader Offline mode213. The customer can also scan the “Statistical number of stores” barcode to view thenumber of stored barcode.4. After the upload data, related applications will store the uploaded data. If the datastored in scanner needs to clear, please scan the barcode below to clear the data.
Bluetooth Barcode Reader Offline mode225. After the above steps, scan “Stop offline state” barcode, ending the offline scanningstored procedure.
Bluetooth Barcode Reader Barcode setting23Barcode settingThe barcode scanner can read different type of barcode, please scan the corresponding barcode toset.Global SettingsEnable allsymbologiesDisable allsymbologiesEnable 1DsymbologiesDisable 1DsymbologiesEnable 2DsymbologiesDisable 2Dsymbologies1D SymbologiesCode 128*EnableDisableRestore the factory defaultsUCC/EAN-128(GS1-128)*EnableDisableRestore the factory defaultsAIM128*EnableDisableRestore the factory defaultsEAN-8*EnableDisableRestore the factory defaults
Bluetooth Barcode Reader Barcode setting24EAN-13*EnableDisableRestore the factory defaultsISSNEnable*DisableRestore the factory defaultsISBN*EnableDisableRestore the factory defaultsUPC-E*EnableDisableRestore the factory defaultsUPC-A*EnableDisableRestore the factory defaultsInterleaved 2 of 5*EnableDisableRestore the factory defaultsITF-6Enable*DisableRestore the factory defaults
Bluetooth Barcode Reader Barcode setting25Enable ITF-6 but do not transmitcheck digitEnable ITF-6 and transmit checkdigitITF-14EnableDisbaleRestore the factory defaultsEnable ITF-14 but do not transmitcheck digit*Enable ITF-14 and transmit checkdigitMatrix 2 of 5*EnableDisableRestore the factory defaultsIndustrial 25*EnableDisableRestore the factory defaultsStandard 25*EnableDisableRestore the factory defaultsCode 39
Bluetooth Barcode Reader Barcode setting26*EnableDisableRestore the factory defaultsCodebar*EnableDisableRestore the factory defaultsCode 93*EnableDisableRestore the factory defaultsCode 11*EnableDisableRestore the factory defaultsPlessey*EnableDisableRestore the factory defaultsMSI-Plessey*EnableDisableRestore the factory defaultsRSS-14*EnableDisableRestore the factory defaultsRSS-Limited
Bluetooth Barcode Reader Barcode setting27*EnableDisableRestore the factory defaultsRSS-Expand*EnableDisableRestore the factory defaults2D SymbologiesPDF417*EnableDisableRestore the factory defaultsData Matrix*EnableDisableRestore the factory defaultsQR Code*EnableDisableRestore the factory defaultsMicro QR*EnableDisable__
Bluetooth Barcode Reader Led/Buzzer description28LED and buzzer descriptions:LED and buzzer descriptionsMeaning of representativeGreen light flashing(w/buzzer ringing)Decode successGreen light flash continuously (scan standby)Low battery alarmRed light solidIn chargeRed light goes out (When charging)Charging is completeGreen light flashes continuouslyScanning built-in battery anomalyBlue light flashingEnter the Bluetooth pairing modeBlue light goes out (In bluetooth pairing mode)Bluetooth link successful
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu