unique electronic HS02 Barcode scanner User Manual Bluetooth barcode reader s
Shenzhen Unique Electronic International Limited Barcode scanner Bluetooth barcode reader s
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3991285 |
| Application ID | lJ84O9uQfsFtFic25ySfRw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 305.58kB (3819741 bits) |
| Date Submitted | 2018-09-05 00:00:00 |
| Date Available | 2018-09-05 00:00:00 |
| Creation Date | 2016-11-25 11:48:23 |
| Document Lastmod | 2018-08-28 09:35:32 |
| Document Title | Bluetooth barcode reader’s user manual |
| Document Creator | WPS Office |
| Document Author: | Administrator |
Bluetooth Barcode Reader HID Mode for IOS FS02 user manual HID mode for IOS 1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly. 2. Enable the bluetooth of IOS to pair with the barcode reader. After the pairing is successful, you can use it with Notes/office files or other cursor blinking position. (Please follow the steps below) Bluetooth Barcode Reader HID Mode for IOS （1）Turn on the ipad, and find the bluetooth option. （2）Enable bluetooth, and the ipad will search automatically. After the searching is finished, click the scanner’s name to connect. Bluetooth Barcode Reader HID Mode for IOS （3）After the connection is successful, the blue LED on the scanner will be off. Then you can use it with Notes/office files or other cursor blinking position. Note: In android system, If the soft keyboard can not display, you need to switch the hardware physical keyboard to OFF status. In IOS system, you can also click trigger button for four times to hide and display soft keyboard for IOS. Bluetooth Barcode Reader HID Mode for Windows HID mode for Windows 1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly. 2. Enable the bluetooth of Windows device to pair with the barcode reader. After the pairing is successful, the blue LED on the scanner will be off. Please follow the steps below. Bluetooth Barcode Reader HID Mode for Windows （1）Find out the bluetooth option on the computer. (2) Enable the bluetooth, and the Windows device will search automatically. After the searching is finished, click the scanner’s name to connect. Bluetooth Barcode Reader HID Mode for Windows （3）After the connection is successful, the blue LED on the scanner will be off. Then you can use it with Notes/office files or other cursor blinking position. Bluetooth Barcode Reader SPP Mode for Windows SPP mode for Windows 1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash slowly. 2. Enable the bluetooth of Windows, and pair the barcode reader. The PIN number of SPP mode is 1234. And now you need a software to help connection. Please download the test software for Serial port from internet, then install the test software to your computer and run it. Please follow the steps below: Bluetooth Barcode Reader SPP Mode for Windows (1) Please double click to open the software, choose “Serial Port”, you need to find out the COM port first in the Device manager of computer, then select the COM port in the software, click “Open Device”. (2) Now the blue LED on the scanner will be off. Bluetooth Barcode Reader SPP Mode for Windows (3) After the connection is successful, you can scan barcode data into the dialog box . Bluetooth Barcode Reader HID Mode for Android HID mode for Android 1.Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly. Enable the bluetooth of Android device to pair with the barcode reader. After the pairing is successful, the blue LED on the scanner will be off. Please follow the steps below. 10 Bluetooth Barcode Reader HID Mode for Android (1)Find the bluetooth icon in setting, shown in “The 1st” picture. Click to enter and enable bluetooth, and then the Android device will automatically search, shown in “The 2nd” picture. The 1st The 2nd (2)After the search is completed, click scanner’s name to connect, then “Bluetooth keyboard connected” will display on the soft keyboard, and the blue LED on the scanner will be off, the connection is successful, shown in “The 3rd” picture. Now, you can use it with Notes/office files or other cursor blinking position, shown in “The 4th” picture. The 3rd The 4th 11 Bluetooth Barcode Reader SPP Mode for Android SPP mode for Android Due to some Android device can’t support Bluetooth HID protocol very well. It can not connect bluetooth scanner with HID mode. In general, Android support SPP protocol very well. 1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash slowly. 2. Please download our BIM(Bluetooth Input Method) for android from our website, or get it from our sales, then install BIM to your smartphone and run it. And then please follow the wizard to connect barcode scanner to finish the connection. The PIN number of SPP mode is 1234. After the connection is successful, the blue LED on the scanner will be off. 12 Bluetooth Barcode Reader Instuction for BIM User manual for Bluetooth Input Method in Android device (1) Install BIM .apk into Android device, run and use it as below steps one by one, shown in “The 5th” picture. (2) Click “SCAN”, select “BIM” in the pop-up window, shown in “The 6th” picture. The 5th The 6th (3) Now you have two methods to connect scanner, please follow the steps below: Way 1: Scan the Mac address(QR code) on the scanner, shown in “The 7th” picture, after, you will see “Scan is successful, please connect the bluetooth”, click “Ok”, shown in “The 8th” picture. 13 Bluetooth Barcode Reader Instuction for BIM The 7th The 8th Way 2: Click “Search” on the top right corner in “The 7th” picture, and click search in pop-up window, shown in “The 9th” picture, choose the scanner’s name to connect, shown as “The 10th” picture. The 9th The 10th 14 Bluetooth Barcode Reader Instuction for BIM (4) Connection is successful, it will shown: “Activation successful”. shown in “The 11th” picture, now you can scan the barcode to the text box or notepad, word..., shown in “The 12th” picture. Note: If it doesn’t connect automatically, click “BT” in “The 11th” picture, and click “Connect”. The 11th The 12th (5) Shown as “The 13th” picture, click “Open”/ “Close” to turn on / off the virtual keys, you can click on the white circle to scan barcode. 15 Bluetooth Barcode Reader Instuction for BIM The 13th The 14th (6) You can configure the barcode reader via the “Function” in the picture “The 13th”, shown as “The 14th” picture. Click “Scanner Setting”, you can set bluetooth name/prefix Character/suffix character/buzzer/output model and sleep time of the barcode reader, please check “The 15th” picture. The 15th The 16th (7) SPP Bluetooth Name: Please click “SPP Bluetooth Name”, and enter the required set of Bluetooth name in the pop-up window, then click “SUBMIT”, shown in “The 16th” picture. (8) HID Bluetooth Name: The method is same as SPP Bluetooth Name. 16 Bluetooth Barcode Reader Instuction for BIM The 17th The 18th (9) Prefix character: Please click “Prefix Character” option in “The 15th” picture, and click”+” in the pop-up window, shown in “The 17th” and “The 18th” picture. Now click the text-box behind “CR”(CR is default setting of the product, please refer to the ASCII). Shown in “The 19th” picture. The 19th The 20th (10) Choose the symbol required, and enable Prefix, shown in “The 20th” picture, then click “SUBMIT”, the setting is finished( the same method to set Suffix). (11) Now you can scan barcode, shown in “The 21th” picture. 17 Bluetooth Barcode Reader USB mode The 21h The 22th Note: The default suffixes are CR and LF, please put your suffix in front of the default suffix. (12) Buzzer: Click “ Buzzer”, and choose the Volume required, shown in “The 22th” picture. Note: When you configure the barcode reader, please keep the scanner is active mode, the method is: click the scan button on the barcode reader every 2-3 seconds, but don’t read any barcodes. USB mode: If you need to use a USB cable to connect the scanner, you need to set the output mode to USB mode. Please scan the following two barcodes: 18 Bluetooth Barcode Reader USB mode 0 mode USB This barcode scanner has five languages for your selection, and used in USB output mode. You need to switch the computer input method to the same, please scan the barcodes below. 19 Bluetooth Barcode Reader Offline mode Offline mode: You can use offline upload functionality, barcode data stored in the scanner can be uploaded to your smartphone or computer via Bluetooth or USB. Concrete implementation steps: 1. Scan “start offline state” and “Offline mode” barcodes as shown below to enter the offline scanning. The data you scanned will be stored in the scanning device. Offline mode 2. The customer can connect to the computer through USB or Bluetooth interface or data terminal to upload the data. If customers need to save the data stored in the file, open Note pad or similar software to enter the data. If the customer wants to store data in a custom application (such as submitted the barcode data into a application), refer the customer to the insertion point where you want to enter the data in the dialog box. Then barcode data entry and online scanning are in the same way. Customers can choose different speed to upload the data according to your application. There are three different speeds for you: fast speed, middle speed and slow speed upload. (1) Fast upload means upload data without time interval; (2) Middle speed is to upload data the interval of 1 second; (3) Slow upload refers to each interval of 3 seconds to upload the data. 20 Bluetooth Barcode Reader Offline mode 3. The customer can also scan the “Statistical number of stores” barcode to view the number of stored barcode. 4. After the upload data, related applications will store the uploaded data. If the data stored in scanner needs to clear, please scan the barcode below to clear the data. 21 Bluetooth Barcode Reader Offline mode 5. After the above steps, scan “Stop offline state” barcode, ending the offline scanning stored procedure. 22 Bluetooth Barcode Reader Barcode setting Barcode setting The barcode scanner can read different type of barcode, please scan the corresponding barcode to set. Global Settings Enable all symbologies Disable all symbologies Enable 1D symbologies Disable 1D symbologies Enable 2D symbologies Disable 2D symbologies 1D Symbologies Code 128 *Enable Disable Restore the factory defaults UCC/EAN-128(GS1-128) *Enable Disable Restore the factory defaults AIM128 *Enable Disable Restore the factory defaults EAN-8 *Enable Disable 23 Restore the factory defaults Bluetooth Barcode Reader Barcode setting EAN-13 *Enable Disable Restore the factory defaults ISSN Enable *Disable Restore the factory defaults ISBN *Enable Disable Restore the factory defaults UPC-E *Enable Disable Restore the factory defaults UPC-A *Enable Disable Restore the factory defaults Interleaved 2 of 5 *Enable Disable Restore the factory defaults ITF-6 Enable *Disable 24 Restore the factory defaults Bluetooth Barcode Reader Barcode setting Enable ITF-6 but do not transmit check digit Enable ITF-6 and transmit check digit ITF-14 Enable Disbale Restore the factory defaults Enable ITF-14 but do not transmit check digit *Enable ITF-14 and transmit check digit Matrix 2 of 5 *Enable Disable Restore the factory defaults Industrial 25 *Enable Disable Restore the factory defaults Standard 25 *Enable Disable Code 39 25 Restore the factory defaults Bluetooth Barcode Reader *Enable Barcode setting Disable Restore the factory defaults Codebar *Enable Disable Restore the factory defaults Code 93 *Enable Disable Restore the factory defaults Code 11 *Enable Disable Restore the factory defaults Plessey *Enable Disable Restore the factory defaults MSI-Plessey *Enable Disable Restore the factory defaults RSS-14 *Enable Disable RSS-Limited 26 Restore the factory defaults Bluetooth Barcode Reader *Enable Barcode setting Disable Restore the factory defaults RSS-Expand *Enable Disable Restore the factory defaults 2D Symbologies PDF417 *Enable Disable Restore the factory defaults Data Matrix *Enable Disable Restore the factory defaults QR Code *Enable Disable Restore the factory defaults Micro QR *Enable Disable 27 Bluetooth Barcode Reader LED and buzzer descriptions: LED and buzzer descriptions Green light flashing(w/buzzer ringing) Green light flash continuously (scan standby) Red light solid Red light goes out (When charging) Green light flashes continuously Blue light flashing Blue light goes out (In bluetooth pairing mode) Led/Buzzer description Meaning of representative Decode success Low battery alarm In charge Charging is complete Scanning built-in battery anomaly Enter the Bluetooth pairing mode Bluetooth link successful 28 FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Format : application/pdf Creator : Administrator Description : Title : Bluetooth barcode reader’s user manual Comments : Company : Source Modified : D:20161125114823+03'48' Create Date : 2016:11:25 11:48:23+03:30 Creator Tool : WPS Office Modify Date : 2018:08:28 09:35:32+08:00 Metadata Date : 2018:08:28 09:35:32+08:00 Keywords : Producer : Document ID : uuid:ed250352-6f9c-4cc5-9ff8-52d6be8ed233 Instance ID : uuid:846fd333-3ac2-4fc9-ae68-f30d823a551e Page Count : 29 Author : Administrator Subject : Trapped : falseEXIF Metadata provided by EXIF.tools