Unisen KP-810-21BTL Bluetooth Keyboard User Manual

Unisen Limited Bluetooth Keyboard

user manual

instructionsMini Bluetooth Keyboard 迷你蓝牙键盘使用指南(KP-810-21BTL)
FN+Touch the board the scrollbarlook through the webope n playe rsope n mail bo xmut emou se leftope n searc hingope n my comp uterope n the bro wserhom e gapemou se righ tFN+ Lock Se lecti onAdj ustab le mous e speedtwo sp eed can b e adju stablePower Switch
To avoid injury,death of personnel or damage to the equipment the operator must refer to the explanations in this User ’s ManualBattery:There is a lithium-ion rechargeable battery in this device.Don’t water this device,or put it in a humid environment for a long time or the device will be damaged.Attention to traffic safety(CAR PC):Do not use the device while driving.When you want to use it,please park your car.Safety PrecautionsSafety MattersIn vicinity of dangerous goods to be shut downIn gas station and close to fuel and chemical agents and other hazardous materials areas,please turnthe device off.AccessoriesOnly use factory specified parts.Please use the supplied travel charging cable.the use of other charging devices may be dangerous.OverviewThis is a wonderful combo,Mini Bluetooth QWERTY keyboard,TouchPad combo,with USB interface AdapterFor the lectuer,sales manager,presenter,from within a 30' radius make a presentation and operate PC Bluetoothly.Change slides and screen options,writeon the screen,emphasize words and objects just by using this wireless Mini Keyboard and Mouse with Touch Pad.
This product was added to the innovative functionOf the mouse wheel,when you press the Fn buttonWith your fingers Touch anywhere in the slidingregion,can facilitate the realization of the mousewheel functions.This human design,it can be easierfor to browse the web better,edit documents.The keyboard also features an auto sleep and autowake mode.If there is a long period of inactivity,thekeyboard will automatically go into a sleep mode.During the sleep mode,the user can wake the unitup by pressing any key.IntroductionAuto sleep and wake featureInterferenceAfter finishing using the keyboard,push the switchto the off position.This turns off the power,of thekeyboard.The USB receiver should be plugged outfrom the PC and then inserted back in the keyboardso it is being kept safely.Product overviewTouchpadThe device with built-in lithium-ion battery,pleaseuse only approved data lines and chargers.Fully charge the unit before operating for thefirst time.This device can be used when charging,but will extend the charging time;When the battery is low,the low-voltage light willflash to warn the user.The unit will automaticallyturn off the battery has been depleted.Charging the battery(Only for Configure A)
Computer system requirementsWindows Mac OSAndroid/iOS OSMeasurements(LxWxH): 146.8x97.5x19mmWeight(grams): 110gOperational Range: up to 10 metersTransmit power: +5db MaxOperation voltage: 3.3VOperation current: <50mACharging current: <300mASleep current: <1mAAppendixTechnical parametersSpecificationNotes : This product has the configuration of A andB configuration can chooseConfigure A: lithium battery version,this version built in rechargeable lithium battery,additional charge USB line.Configure B: Install AAA* 2 battery,this version dosenot support the charging function. Do not attempt to disassemble the device or replace rechargeable battery.Doing so will void the warranty.The battery will discharge if stored for a long period of time without usage.Use the specified charger.Disconnect the device after the battery has been fully charged.Overcharging the battery.Do not expose the device in extreme heat or cold.Extreme temperatures will cause the life span of the battery to shorten.Use only a damp cloth with mild soap to clean the device.Solvents and other cleaning agents may cause damage to the device.Maintenance
Below are some basic troubleshooting scenarios forthe device.Please contact support from the place ofpurchase if you are unable to resolve any issuse with the device.Problem Possible issue SolutionTroubleshootingWindows XP/2000 Let's take Microsoft Bluetooth Software as an exampleto describe Bluetooth Search,Pairing and Connection, other Bluetooth software please refer to its own user manual.1.Insert Bluetooth adaptor into any vacant USB port on your computer, please be patient to wait system search and install new hard driver. Then bluetooth icon will appear on the taskbar. If your computing device has integrated bluetooth receiver refer to the user manual to enable that receiver.Pairing and establishing connection with computer .Bluetooth icon2.Turn on unit by moving the power switch to ON, press key BLUETOOTH RESET indicated till LED3 blink then release it(about 2-5 seconds) ,that means your unit is ready and searching other Bluetooth device for pairing.Bluetooth ResetLED3Note: during operation, do not press this key, or your bluetooth keyboard will be disconnected from your computer
3.Click “Start”,“Control Panel”(make sure you're in ClassicView),and then double-click Bluetooth Devices.Select “Add”. 4.In the Add Bluetooth Device Wizard,select the “My device is set up and ready to be found check box”,andthen click“Next”. 5. After icon of “Bluetooth Keyboard” appear ,click “Bluetooth Keyboard”,and then click “Next”.6.When the wizard asks you which passkey you want touse,click “Choose a passkey for me”.Then click “Next”.7.After you are prompted to enter your passkey, please type the passkey on Bluetooth Keyboard,and then press Enter.You also can choose no passkey to go next step. PLEASE DO REMEMBER TO USE THE KEY OF BLUETOOTH KEYBOARD WHEN INPUT PASSKEY.8.In the final page of the wizard, click Finish, it maybe take a few seconds for new hardware driver installation before click finish. So please be patient. Your Bluetooth Keyboard should now be successfully paired with your PC and ready to use. Bluetooth KeyboardNew Device9.LED3 will goes out when connection is established successfully. NOTE: keyboard functions WILL NOT work until a bluetooth connection with the computing device is completed.Windows 7Plug bluetooth receiver into any vacan USB port on your computer, please be patient to wait the system recognize your device, it maybe take several minutes. When new hardware has finished driver installation, an icon will appear in the task bar. Right click icon of bluetooth, select “Add a Device”(Bluetooth Receiver is not included)
An window like below will popup indicating that system is search a devie to add... Turn keyboard on by sliding the power switch to ON, LED3 will flash one time, then press key “bluetooth reset” till LED3 flash. And Bluetooth Keyboard will appear in the window. Select it and click “Next”Then you will be required to input a pass code for your device, please do type the code with bluetooth keyboard, then press EnterBluetoothkeybaordBlue tooth K eyboa rd NOTE:1. 2.keyboard functions WILL NOT work until a bluetooth connection with the computing device is completed.Do not tap key “Bluetooth Reset” or you will disconnect its connection during operation. Bluetooth Reset
CONNECT TO iPAD/ iPhone1.Turn your Bluetooth Keyboard on by switch button to on, press Bluetooth Reset key till LED3 flash.2.Turn on your iPhone,tap“settings”=>“Bluetooth”, then your iPhone will search the other Bluetooth forpairing, “Bluetooth keyboard” will be listed when system find your Bluetooth keyboad.3.Tap “Bluetooh keyboard”,then system will install driver and prompt you to input pass code you must type the pass code with your Bluetooth keyboard.4.When it is connected to your iPhone, Bluetoothkeyboard will appear in the list.5.For re-connect to your iPhone:turn your Bluetooth keyboard on,then go to “Bluetooth” device list,and tap “ Bluetooth keyboard”, then connection will be built again.Bluetooth keyboard wouldlike to pair with your iPad Enter the passkey”136956 on“bluetooth keyboard”, foll owed bythe return or enter key.Cancel Connect to other smart mobile with Android O.S1.Activate bluetooth device of your mobile and make sure it is searchable and be able to pair2. Tap search menu to make it in searching state.3. Turn on keyboard and press bluetooth Reset key till LED3 flash
4.Icon of Bluetooth Keyboard will appear in the listwhen bluetooth keyboard is found,tap this icon for pairing5.Tap “Bluetooth Keyboard”,then system will install driver and prompt you to input pass code you must type the pass code with your bluetooth keyboard.- Please be noted that your mobile can’t be connected and can’t be used if your mobile have no HID profile or contact our service dept.- Please be noted if the android device requests to type in its codes on keyboard,please follow and disregard above instructions.1.Click “Settings” 2.Click “Bluetooth” 3.Turn on“Bluetooth”, Search for devices4.Enter Keyboard “9376", Press “Enter”5.Connected successfully
unit doesnot respondKeyboard can notestablish aconnection tothe receiver.The mousepointer moveserratically and/orunresponsive.The unit doesnot charge(only for Configure A)1.Low battery power.2.Unit is not turned on.1.The receiver may not be inserted correctly1.Device may not be within optimal range of the receiver2.Low voltage3.Dust or oil on the touching.1.Defective battery.2.Check connections1.Conntact your local dealer for replacements.2.Verify if the device is securely connected to the charger.1.Bring the unit closer to the receiver.2.Please recharge(for Configure A) or replace the battery(for Configure B)3.Clean the touchpad with a damp cloth.1.Disconnect and reconnect the receiver to the USB port.1.Configure A:charge the device for at least 15minutes.Configure B:Replacement of the AAA.2 battery2.Check if the switch selected to the“ON”position.
This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, includinginterference that may cause undesired operation.Any Changes or modifications not expressly approved by the party responsiblefor compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one or more ofthe following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to whichthe receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.

Navigation menu